Recent years have experienced an increase in construction and demolition waste (C&DW), which is the most significant solid waste stream. C&DW is contributing to exceeding all planetary boundaries and presents a range of other issues. In order to better understand the existing research on C&DW, a global bibliographic analysis was undertaken through seven groups of keyword searches and the results visualised using VOCviewer. The results show that C&DW receives only a modest research attention compared to other areas of waste, and this is despite an exponential increase in C&DW research since 2016. The analyses also show that concrete is the most researched material in terms of C&DW, and that reuse, recycling, and circular economy are so far attracting only proportionally modest research attention. This signals a need for further acceleration of the C&DW research, and specifically for more research on reuse, recycling, and circular economy for materials other than concrete.

Vit-106 is a promising zirconium-based alloy with high glass-forming ability and belongs to the so-called bulk metallic glasses (BMG). Workpieces with a size of around one centimeter in all three dimensions can be obtained from a BMG alloy by casting. However, further increasing the cast size decreases the cooling rate and thus induces crystallization. Selective laser melting (SLM) is a well-known technique to overcome the size limitations for BMGs because a workpiece is built by the addition of multiple melt portions where the cooling rate is kept above the critical one. Currently, BMG parts obtained by SLM suffer from partial crystallization. The present work studies the influence of SLM process parameters on partial crystallization of Vit-106 by metallography and the influence of the microstructure on mechanical properties by microhardness and wear resistance testing. Submicron crystalline inclusions are observed in an amorphous matrix of Vit-106 alloy obtained by SLM. The size and the concentration of the inclusions can be controlled by varying the laser scanning speed. It is shown that submicron crystalline inclusions formed in the amorphous matrix during SLM can favorably affect microhardness and wear resistance.

The populations of clearwing moth borers in Korea have recently exploited and severe damage on pin oaks (Quercus palustris Munchh.). We conducted the field monitoring and the molecular analyses to identify them in an integrated manner. Morphological examination and molecular analyses on COI-gene based intra-and inter-specific genetic divergences (GD) were revealed that the borers were recognized as two invasive species, Sphecodoptera sheni and Paranthrenella pinoakula sp. nov.. The maximum intraspecific GD was found to be 1.9%, whereas the minimum interspecific GD was confirmed as 8.1%, with a distinct barcoding gap. Both MJ network and NJ tree were also showed that 18 haplotypes (HAPs) were detected from the 52 COI sequences. The borers were revealed total 17 HAPs: i) H1-H7 were detected from all seven regions with S. sheni; ii) Wonju and Goyang populations of S. sheni were revealed as more than three HAPs; iii) H7 was closely connected with H8 of Chinese population of S. sheni; iv) H9-H10 were detected as the other samples from Wonju population with P. pinoakula sp. n., and closely located with congeneric species. Maximum likelihood tree also revealed that P. pinoacula sp. n. nested within the congeneric species by genetically separating from the S. sheni.

Printed Circuit Boards (PCBs) are essential to most electronic devices. Digitalization and upgradation of gadget generates lots of PCB-containing electronic waste. Conserving resources and protecting the environment requires recycling such e-waste. The present paper is focused on the recovery of metals from PCBs by physical pretreatment and hydrometallurgical processes. Initially, the waste PCBs were pre-treated to separate metallic and non-metallic fractions. The metallic concentrate was leached using nitric acid (strong oxidative agent) for dissolution of metals. The system was fully jacketed with scrubber and condenser so that no emission of toxic gases to the environment. The process parameters viz. effect of acid concentration, pulp density, temperature, time, etc. were optimized and the obtained data were scientifically validated. Kinetics leaching fitted well with the Shrinking core model, XB = kc.t for Cu, (1-(1-XB)1/2) for Ni and 1-3(1-XB)2/3 + 2(1-XB) for Pb. The optimized conditions derived from these studies will be useful for recovery of metals from waste PCBs, and tin left in the residue could be further treated for the purpose of safe disposal or the utilization in an environmentally friendly manner. The developed process provides environmental benefits and has potential to be commercialized after scale-up studies.

In this study, the extraction of rare earth elements (REEs) from chloride solutions containing mixtures of these metals with solutions of the mixtures of P507 and Cyanex 272 (1:1) of various concentrations was experimentally studied. It was shown that the distribution coefficients of all REEs decrease with increasing concentration of these metals in the initial solution, which is associated with the loading of the organic phase. The most significant improvement in the extraction is observed for heavy group of rare earth elements. The extractability of REEs enhances with increasing atomic number of the element, as is typical for the extraction of these metals with acidic organophosphorus extractants. The data obtained show that separation factors of adjacent rare earth elements mainly decrease with increasing concentration of metals in the initial aqueous solution. Increasing the concentration of the extractant mixture does not have a significant effect on the values of the adjacent REE separation factors. Analysis of the experimental results shows that two commercial products can be obtained from a concentrate of the medium-heavy group. In the first cascade, yttrium can be separated, in the second, a concentrate of dysprosium and terbium can be obtained.

Microplastics have been detected as widespread in an aquatic environment at the microscale, also known as plastic debris. They have continuously increased due to the increase in population, production of synthetic plastics and poor waste management. They are ubiquitous and slowly degrade in soil and water. They are emerging contaminants that have received attention from research communities and public audiences over the last few years. They have high stability and can absorb several other pollutants like heavy metals, pesticides, etc. After entering the environment, they can accumulate and persist for a long time. They can create a serious threat to freshwater ecosystems and human health. These particles can cause physical damage to freshwater organisms. Raman spectroscopy, Fourier-transform infrared spectroscopy, visual identification, density separation, microscopic method, chemical method, thermos-analytical method and hyperspectral imaging method are the commonly known approaches for identification and quantification of microplastics. The noticed concentration of microplastics depends on the analysis method, sampling location and technique. The authors reviewed the sources, health impact, transport and treatment of microplastics in freshwater environments in detail. This study will provide the baseline data for the researchers to do more research on microplastic pollution in the future.

In an era driven by technology and connectivity, where the sphere of learning goes beyond conventional classrooms, e-Service-Learning (e-SL) merges the possibilities of technology with the principles of experiential education in a powerful blend [1]. Service-learning (SL) is an educational proposal that has been cited by UNESCO [2] as an innovative educational tool through which to address the complex challenges of our society. The Sustainable Development Goals [3] provide a framework around which to structure the SL projects and thus develop the skills needed to act on the full range of goals. Embedding digital means open a debate on the intricate relationship between technology, education, and societal impact [4]. By analyzing two focus groups involving faculty, students and community partners, this contribution aims to explore the potential of combining SL and digital empowerment (DE). The focus group participants discussed the opportunities for innovation, the expected impact on them and the society at large, their needs and the pre-conditions needed to make SL and DE successful, and limitations. The results are presented according to the six principles of sustainability education in the university environment, highlighting the transformative potential of combining these principles within SL and DE.

Terahertz tomography is a promising method among non-destructive inspection techniques to detect faults and defects in dielectric samples. Image quality recently significantly improved through the incorporation of a priori information and off-axis data. However, this improvement has come at the cost of increased measurement time. To aim toward industrial applications, it is therefore necessary to speed up the measurement by parallelizing the data acquisition employing multi-channel setups. In this work, we present two tomographic frequency-modulated continuous wave (FMCW) systems working at a bandwidth of 230-320 GHz, equipped with an eight-channel detector array, and compare their imaging results with a single-pixel setup. While in the first system, the additional channels are used exclusively to detect radiation refracted by the sample, the second system features an f-θ lens, focusing the beam at different positions on its flat focal plane, and thus utilizing the whole detector array directly. The usage of the f-θ lens in combination with a scanning mirror eliminates the necessity of the formerly used slow translation of a single-pixel transmitter. This opens up the potential for a significant increase in acquisition speed, in our case by a factor of four to five, respectively.

Penrose’s singularity from 1965 predicted that in the center of the black hole space-time curvature is infinite and consequently gravity force there is infinite. In 2014 NASA measured universal space has Euclidean shape. This means that stellar objects cannot curve universal space and that the space-time singularity model has no physical existence. In the center of black holes energy density of superfluid space is so low that the electromagnetic properties of space are changed. This causes electromagnetic forces between the nucleus and orbiting electrons to become unstable. In the center of a black hole, atoms are falling apart into elementary particles. Black holes are rejuvenating systems of the universe, they transform old matter into fresh energy in the form of elementary particles. Astrophysical jets are the outcome of this process.

The temporo-spatial theory of consciousness postulates that the brain implements its own inner time and space for conscious processing of outside world. In line with this hypothesis, I present a mechanistic model of mutually connected processes that encode the inner space and time. The model is used to elaborate the binding mechanism between two sets of processes representing the inner space and time, respectively. Further, a stochastic version of the model is developed to investigate the interplay between the binding strength and noise. The spectral entropy is used to characterize the noise effects on the systems of processes when the binding strength is varied. The stochastic modeling results reveal that the spectral entropy values for strongly bound systems have similar entropy values for weakly bound or even decoupled systems. Thus, the analysis performed in this study allows to conclude that the binding mechanism is noise-resilient.

In recent years, Synthetic Aperture Radar (SAR) has received attention in the Automatic Target Recognition (ATR) field due to its ability to acquire images both day and night, combined with the superior resolution offered by the latest sensors. However, despite advances, there remains a deficiency in dataset quality and quantity. This has necessitated the use of simulated data to overcome challenges associated with obtaining large quantities of high-quality images of targets and their subsequent labeling. In this study, we trained a Convolutional Neural Network (CNN) using a simulated dataset, subsequently employing it to classify real images from the MSTAR dataset. Traditional training methodologies often struggle with generalization when confronted with domain disparities between simulated and real data. To mitigate this, we exploited Margin Disparity Discrepancy (MDD), a domain adaptation technique not previously explored in SAR context. Findings from this study showcased a 13% increase in classification accuracy and improved generalization using MDD. Through Explainable AI (XAI) techniques such as t-SNE and other metrics like Kullback Leibler Divergence (KLD), we revealed a more distinct alignment of feature spaces between the two domains after domain adaptation, emphasizing MDD’s role in enhancing model accuracy and generalization.

In any forest stand, the theoretically modelled output of sawlogs (the most valuable roundwood assortments) will differ from what is actually obtained. The aim of this study was to assess whether it is possible to characterize this difference by site properties or inventory parameters of forest element for birch, black alder and as-pen. The differences in yield of sawlogs varied among soil types, and was increasing with age and average diameter of the forest element. The theoretical model for assortment grading predicted a lower yield of saw-logs compared to actually obtained yield at a lower age and at a lower average diameter, but overestimated output of sawlogs as age and diameter increase. The results highlight necessity to consider decreasing wood quality with increasing age to account for damage, such as stem rot, in assortment tables.

Post-training quantization is pivotal in deploying convolutional neural networks for mobile applications. Block-wise reconstruction with adaptive rounding, as employed in prior works like BrecQ and Qdrop, facilitates acceptable 4-bit quantization accuracy. However, adaptive rounding is time-intensive, and its constraint on weight optimization space curtails the potential for quantization performance. The optimality of block-wise reconstruction hinges on the quantization status of subsequent network blocks. In this investigation, we delve into the theoretical underpinnings of the limitations inherent in adaptive rounding and block-wise reconstruction. Our exploration leads to the development of a post-training quantization methodology, designated as AE-Qdrop. This algorithm operates in two distinct phases: block-wise reconstruction and global fine-tuning. The block-wise reconstruction phase introduces a progressive optimization strategy, superseding adaptive rounding, which not only augments quantization precision but also significantly improves quantization efficiency. To mitigate the risk of overfitting, we introduce a random weighted quantized activation mechanism. During the global fine-tuning phase, we account for interdependencies among quantized network blocks. The weight of each network block will be corrected with logit matching and feature matching. Extensive experiments validate that AE-Qdrop achieves high-precision and efficient quantization. For instance, in the case of 2-bit MobileNetV2, AE-Qdrop outperforms Qdrop by achieving a 6.26% enhancement in quantization accuracy and quintupling the quantization efficiency.

There is a need to develop enriched milk drinks with healthy and natural additives. A consumer test was conducted to compare milk (cow and camel) flavored with date syrup (Khlass and Sukkary varieties) at different percentage. The objective of the present work was to study consumers liking patterns for flavored milk drinks from dates syrup (from Khlass and Sukkary dates), at different percentages, added to milk (cow and camel) utilizing preference mapping analysis. A total of sixteen trained panelists took part in the test. The obtained data were used to develop an internal preference map for these samples. Principal component analysis (PCA) and Agglomerative hierarchical clustering (AHC) algorithms were used to construct the preference map. The first component signifies overall acceptance of taste and color, while the second focuses on texture and flavor. Consumers were grouped into five clusters based on preferences. Cluster two favored both components positively, while cluster four leaned negatively on both. A factorial ANOVA was performed and the results showed a significant effect of the main factors as well as the interactions. Panelists preferred cow's milk over Camel’s milk in all aspects. For taste, cow’s milk with 20% Khlass syrup or 10% Sukkary syrup was favored, while in flavor, it was cow’s milk with 5% Khlass syrup and Camel’s milk with 10% Sukkary syrup. Texture-wise, Camel’s milk with 5% Khlass syrup and 15% Sukkary syrup, along with cow’s milk with 10% Khlass syrup, received top marks. In color evaluation, cow’s milk with 15% Sukkary syrup was the preferred choice. Finally, for overall color score, cow’s milk with 10% Sukkary syrup led, followed by cow’s milk with 5% Sukkary syrup. This research suggests that dairy companies may have more impact if they use date syrup as a natural and healthy flavor. The preference map includes two main dimensions; the first represents overall acceptance, taste, and color while the second is related to flavor and texture attributes. The preference map can be used in product optimization and development.

Natural Fibre Composites (NFC) are eco-friendly, sustainable alternatives to synthetic polymers. However, some intrinsic natural fillers´ properties hinder their widespread implementation as re-inforcement in polymeric matrices and require further investigation. In the scope of this study, the thermal, rheologic, mechanical (tension and flexural modes), morphological properties, water ab-sorption and dimensional stability of the NF polypropylene (PP) based injection moulded compo-sites with the rice husk (rh) and olive pits (op) of 20 wt% and 30% wt%, were investigated. The results suggest that the higher content of the rice husk and olive pits led to a similar reduction of the Melt Flow Index (MFI), independent of the additive type compared to virgin polypropylene (PPv). The melting and crystallization temperatures of the PPrh and PPop composites did not change with statistical significance. The composites are stiffer than the PP matrix by up to 49% and possess higher mechanical strength in what concerns the tension mode at the expense of de-creased ductility. PPrh and PPop have superior flexural modulus in the bending mode, while the flexural strength improvement was accomplished for the PP30%rh. The dimensional stability of the composites was improved as the linear shrinkage in the flow direction was decreased by 49% for PPrh and 30% for PPop, positively correlating with an increase in the filler content and stiff-ness. PPop was less susceptible to water sorption than PPrh due to fibres' composition and larger surface-to-area volume ratios.

Disease detection and prediction have been one of the most frequent uses of machine learning models in the last decade, and Parkinson's disease is no exception. It is common for people in their old age to have one form of disease or another depending on the circumstances in which they find themselves. This study analyzed and evaluated various supervised machine learning models to detect the presence of Parkinson's disease in elderly individuals. An extreme gradient boosting model, along with other models, such as naïve Bayes, random forest, K-nearest neighbor, and support vector machine (SVM), was implemented to determine the best outcome. The extreme gradient boosting (XGBoost) model is a powerful boosting machine learning technique, particularly in terms of speed and accuracy. The results showed that the XGBoost model, which is an optimized version of the other boosting models, is capable of projecting the presence of Parkinson's disease with very high accuracy compared to other algorithms. The implemented classification algorithm extreme gradient boosting method achieved approximately 98 % accuracy, 97.5 % precision, 100.0 % recall, and 98.7% f1-score which are high compared with the results found in the existing literature.

This work is the result of a two-year research leave (French CNRS delegation) with field research in France, India and England, based on a total of 36 interviews in the three countries. The aim of this publication is to discuss how the laws of different countries deal with gender and what representations the laws reveal about gender roles in the societies they regulate through discourses. For example, France, England and India have laws that are more or less specific about gender roles in society: the language used to express the laws also fulfils gender roles while affecting people’s everyday lives. The whole issue of gender and rights is about the presumed and desired equality of rights for women and men, and the way in which this corresponds to the reality of women’s and men’s lives. Indeed, laws are necessary to regulate human relations in society. For example, anti-discrimination laws exist to protect and regulate these relationships in a common space, to regulate and combat abuse. The emphasis on gender – including gender roles – and LGBTQ+ people shows that this phenomenon is understood and experienced differently in global practice. Our examples in this publication focus on France and India.

Numerous types of oligonucleotide modifications have been developed since automated synthesis of DNA/RNA became a common instrument in the creation of synthetic oligonucleotides. Despite the growing number of types of oligonucleotide modifications under development, only a few of them, and moreover, their combinations have been studied wide enough in terms of their in-fluence on the properties of corresponding NA constructions. In the present study, a number of oligonucleotides with combinations of 3′ end lipophilic (single cholesteryl or pair of dodecyl residues) and phosphate backbone modifications were synthesized. The influence of the combi-nation of used lipophilic groups with phosphate modifications of various nature and different position on the efficiency of cell penetration was evaluated. Obtained results indicate that even a couple of phosphate modifications are able to affect a set of oligonucleotide properties in a complex manner and can remarkably change cellular uptake. These data clearly show that the strategy of using different patterns of modification combinations has great potential for the ra-tional design of oligonucleotide structures with desired predefined properties.

Triphenylphosphonium (TPP) derivatives of a decapeptide related to sequences of bactenecin 7 (Bac7) and oncocin (Onc112) were synthesized and studied as potential antimicrobial compounds using various biochemical and microbiological assays. It was shown that while the reduction of the Bac7 length to 10 a.a. residues dramatically decreases the affinity to bacterial ribosomes, the modification of peptide with alkyl-TPP moieties leads to an increase in the affinity. New analogs which structure combines a decapeptide related to Bac7 and Onc112 — Bac(1-10, R/Y) — and TPP, attached to the C-terminal amino acid residue through alkylamide linkers, inhibit translation in vitro and are found to be more selective inhibitors of bacterial translation as compared with eukaryotic translation, than Onc112 and Bac7. Triphenylphosphonium analogs of a decapeptide related to Bac7 and Onc112 suppress the growth of both gram-negative bacteria, similar to Onc112 and Bac7, and gram-positive ones as alkyl-TPP derivatives, and also act against some resistant laboratory strains. Bac(1-10, R/Y)-C2-TPP, containing a short alkylamide linker between the decapeptide and TPP, is transferred into the E. coli cells via the SbmA transporter protein. TPP derivatives of the decapeptide Bac(1-10, R/Y) containing either decylamide or ethylamide linker cause B. subtilis membrane depolarization, similar to alkyl-TPP. The Bac(1-10, R/Y)-C2-TPP analog is proved to be non-toxic for mammalian cells by MTT-test.

Thirty-six healthy 21-day-old weaned ternary piglets (Duroc × Landrace × Yorkshire) were randomly divided into 2 treatments with 18 replicates per treatment and 1 pig per replicate. The control group was fed with basal diet and the test group was fed with diets supplemented with 1 kg/t tea residue. The test period was 28 days. The results are as follows: The addition of tea residue in the diet has no significant effect on the growth performance of weaned piglets (P > 0.05), but it could significantly reduce the diarrhea rate of piglets from 1 to 7 days and 1 to 28 days (P < 0.05). Compared with the control group, the dietary supplementation of tea residue had no significant effect on nutrient apparent digestibility, plasma biochemical indexes and plasma immune indexes (P > 0.05), but increased the content of glutathione in plasma (P < 0.05). Tea residue had no significant effect on the morphology of jejunum and ileum of piglets (P > 0.05), but it could significantly reduce the content of chloride ion in feces (P < 0.05). Compared with the basal diet group, there was no significant difference in the relative expression of TMEM16A and CFTR mRNA in the colon of weaned piglets (P > 0.05). The whole-cell patch clamp recording showed that the TMEM16A and CFTR ion channels could be activated by ionomycin and forskolin, respectively. However, when the HT-29 cells transfected with TMEM16A and CFTR channels were treated with tea residue extract, it could significantly inhibit the chloride current of the TMEM16A and CFTR ion channels (P < 0.05).

Anthracnose, caused by the fungus Colletotrichum lindemuthianum, poses a significant and widespread threat to the common bean crop. The use of plant genetic resistance has proven to be the most effective strategy for managing anthracnose disease. The Amendoim Cavalo (AC) Andean cultivar has resistance against multiple races of C. lindemuthianum, which is conferred by the Co-AC gene. Fine mapping of this resistance gene to common bean chromosome Pv01 enabled the identification of Phvul.001G244300, Phvul.001G244400, and Phvul.001G244500 candidate genes for further validation. In this study, we assessed the relative expression of Co-AC candidate genes, as well as other putative genes in vicinity of this locus and known resistance genes, in the AC cultivar following inoculation with the race 73 of C. lindemuthianum. Gene expression analysis revealed significantly higher expression levels of Phvul.001G244500. Notably, Phvul.001G244500 encodes a putative Basic Helix-Loop-Helix transcription factor, suggesting its involvement in the regulation of defense responses. Furthermore, we observed a significant modulation of the expression of defense related genes PR1a, PR1b, and PR2, in a time-course experiment. These findings contribute to the development of improved strategies for breeding anthracnose-resistant common bean cultivars, thereby mitigating the impact of this pathogen on crop yields and ensuring sustainable bean production.

Background: While outcomes of chronic phase chronic myeloid leukemia (CP-CML) patients aged over 65 years have been extensively evaluated in real-life experiences, limited data exist for the very elderly population (i.e., aged ≥ 75 years), especially for next-generation tyrosine kinase inhibitors (TKIs). In this retrospective study, we sought to evaluate the safety and efficacy of TKIs in this particular setting of patients. Methods: We conducted a retrospective analysis of a multicenter cohort of 123 newly diagnosed CP-CML very elderly patients. Results: The median age at diagnosis was 80 years (range: 75-96). In the first-line, 86.1% of patients received imatinib, 7.1% dasatinib, 5.6% nilotinib, and 0.81% received bosutinib. A total of 31 patients (25.2%) switched to second-line therapy, nine patients to a third-line and one patient to a fourth line of therapy. Resistance to treatment was the primary reason for switching therapy in both the first (64.5%) and second lines (77.7%). At diagnosis, reduced doses were administered in 36.5% of patients, in 61.2% in the second line, and in all patients in subsequent lines of therapy. In first-line setting, 71.9% of patients achieved an early molecular response (EMR, i.e. 3-month BCR::ABL1 IS <10%); at 6, 12, and 24 months, MR3 was reached by 35.7%, 55.7%, and 75.0% of patients, with 16.6%, 35.7%, and 51.7% achieving DMR at the same timepoints. Treatment-free remission (TFR) was successfully attempted in 11 patients. During the follow-up period, adverse events (AEs) were observed in 78.8% of patients, including 22 cases of cardiovascular AEs. Toxicity grade ≥ 3 was more commonly observed in patients treated with standard doses of TKIs compared to reduced doses (p=0.033). Overall, median follow-up was 46.62 months (range: 1.8-206.2), and 43 patients died due to non CML related causes. Three patients died due to disease progression to advanced (n=1) and blastic (n=2) phases. The 5-year overall survival (OS) for the entire cohort was 71.9% (95% CI: 0.63-0.81), with no significant difference between patients treated with standard doses of TKI compared to those treated with reduced doses (p=0.35). Conclusions: TKIs appear to be safe and effective even in very elderly CML patients, and dose optimization strategies yield satisfactory molecular responses for adequate disease control with an improved safety profile.

Hungary's first national park was created in 1973 in the Hortobágy area to protect Europe's largest contiguous steppe area with its flora and fauna. The Hortobágy National Park - the Puszta was inscribed on the UNESCO World Heritage List as a cultural landscape in 1999. The park's outstanding importance is due to the predominantly non-arboreal steppe vegetation, home to a unique bird fauna, and the alkaline and chernozem soils with a complex, mosaic-like spatial structure. In addition, the landscape of the Hortobágy has a pastoral history stretching back thousands of years. Several hypotheses have been put forward, which suggest that the alkaline soils and the habitats that cover them were formed as a result of human activities related to river regulation that began in the second half of the 19th century. However, palaeoecological and palaeobiological studies over the last 30-40 years have pointed to the natural origin of the alkaline steppes, dating back to the end of the Ice Age. For thousands of years human activities, in particular grazing by domestic animals, hardly influenced the natural evolution of the area. Drainage of marshy and flooded areas began in the 19th century, and the introduction of more and more intensive agriculture, had a significant impact on the landscape. This paper aims to describe the past natural development of this special alkaline steppe ecosystem, with particular reference to the impacts of past and present human activities, including conservation measures.

Climate change is affecting the planet, compromising survival and altering forest ecosystems. Investigating climatic variations in all regions is important. The aim of this research was to assess such variations in the W and Pendjari Biosphere Reserves in Benin from 1985 to 2015 and predict climate up to 2045. Drought frequency was assessed by using the Standardized Precipitation and Evapotranspiration Index (SPEI) and correlation was performed between climatic variables. Then a predictive analysis was computed. From 1985 to 2015, there was change in the climate with few severe dry and wet years while no extreme climatic condition was noticed. Most of the years showed nearly normal climatic conditions. The predicted climate indicates an absence of extreme conditions up to 2045 but an increase in the annual humidity is expected. A low decrease in annual mean temperature with high confidence is expected. Decision-makers can better organize adaptation programs and sensitize people in the reserves on their role in environmental conservation and mitigation of climate change using these outputs.

Container crane has been widely used for port operation. However, the structure of port container crane is large, which always lead to crane damage under the vibration and strong wind. Therefore, a method for vibration reduction of container crane structure based on particle damping technology is proposed. In this investigation, the scale 1:80 crane model is built, the equivalent mechanical model is also established to preliminary verify the effect of vibration suppression. Furthermore, the dependence of vibration suppression effect on the key parameters of the damper, i.e., filling material, filling rate, particle size, and installation position of dampers are analyzed through experiments. The results indicate that the vibration peak of the crane structure displayed in Simulink oscilloscope is weakened and lags behind, the installation of the damper brings the effect of vibration suppression for the crane, the vibration suppression effect reaches 25%; the crane mode obtains the best vibration suppression effect under the condition that the material filled in the damper has a large density and elastic modulus, sufficient collision space and high collision frequency, and the dampers are installed far away from the crane center of gravity. The optimum parameters of the damper obtained from experiments, 12 mm lead beads, filling rate of 60%, installed in the distal ends within the strength range of the forearm of the crane. It is thus concluded that the particle damping technology has provided an effective way in wind and vibration reduction for container crane.

As the lifespan of porous asphalt pavement extends, it invariably experiences performance degradation and an increase in tire/pavement noise compared with the original surface when it is newly built. To understand the medium-term performance of porous asphalt pavement during service and reveal the influence of different pavement performance indicators on tire/pavement noise generation, a seven-year continuous observation and data analysis study was conducted. Porous asphalt with different designed material parameters was taken into account, including thin-layer porous asphalt overlay with a maximum nominal aggregate size of 10mm (PUC-10), porous asphalt with a maximum nominal aggregate size of 13mm (PAC-13), and a two-layer porous asphalt incorporating both PUC-10 and PAC-13 (PUC-10+PAC-13). Using automated pavement technology testing equipment, key performance indexes, including damage rate (DR), rut depth (RD), international roughness index (IRI), and sideway force coefficient (SFC), were measured and calculated. The on-board sound intensity (OBSI) method was used to test noise levels in three types of porous asphalt pavement structures and on a dense graded easy compact asphalt concrete (ECA) for comparison. The progressions of the medium-term performances were analyzed according to the measured results. The correlations between tire/pavement noise levels and testing speed, testing lane, pavement structure, and road condition indicators were investigated by regression. The research results revealed that the DR and SFC of the three types of porous asphalt pavement displayed more significant attenuation in the service period, while the IRI and RD showed small changes. Among them, the SFC demonstrated significant attenuation over the first 4 years, decreasing between 13.8% and 17.0%. From the 3-7 years of operation, the transverse crack disease in porous asphalt pavement progressed rapidly. The three porous asphalt pavement structures tested exhibited commendable noise reduction capabilities. Compared to ECA, the OBSI noise levels of these structures were lower by 2.09 dB, 1.53 dB, and 2.88 dB, respectively. Compared to other pavement condition indicators, RD had a more significant impact on the OBSI value of the PUC-10 porous asphalt pavement. For the PUC-10+PAC-13 porous asphalt pavement, there was a significant linear relationship between the OBSI value and SFC, mainly due to polishing of the coarse aggregate surface. It leads to a decrease of the micro-texture, which lies in increasing tire/pavement noise at high-frequency ranges and decreasing SFC. This study will have guiding significance for the research of the attenuated law and durability improvement of porous asphalt tire/pavement noise.

Fluorescent labels, especially FRET probes, are promising tools for studying a number of bio-chemical processes. In this paper, we promoted 2 important applications of FRET probes (MUTMAC-R6G and FITC-R6G): i) the formation of micelles from surfactants of various natures and polymers (chitosan – fatty acid), as well as ii) monitoring of enzymatic activity with improved parameters (increased analytical signal and improved selectivity due to shift to the long-wavelength region). The formation of micelles is accompanied by the convergence of fluorophores in the hydrophobic micelle core by a distance closer than in the buffer solution, thus r/R0 (where R0 – Foerster radius) is chosen as an analytical signal of micelle formation, including critical micelle concentration (CMC) and critical pre-micelle concentration (CPMC). The CMC values calculated using FRET probes are in a good agreement with literature data. At the same time, the r/R0 function provides valuable information about the nature and mechanism of micelle formation. With the second analytical application of FRET probes, we considered the optimization of techniques for studying enzymatic activity. The enzyme catalyses the reaction with the release of a fluorescent product, the signal from which may not be enough for detection, or it may be quenched, for example, in the reverse micelles (AOT-octane). Here we have proposed a solution – a FRET probe containing a rhodamine 6G (R6G) acceptor, which allows us to monitor the enzymatic reaction selectively (in the red region, 550-600 nm), and obtain a significantly higher fluorescence yield (potentially from 10 to 250 times). Thus, we have demonstrated a high potential for the FRET probes application as indicators of micelle formation as well as for the study of the enzyme catalytic activity. In the future, the method developed has prospects for application in the visualization of the enzyme functioning in cells due to the shift of the fluorescence signal to the long-wavelength region with an increase in the signal selectivity to suppress autofluorescence.

A cell-surface ectonucleotidase CD39 mediates the conversion of extracellular ATP into immunosuppressive adenosine with another ectonucleotidase CD73. The elevated adenosine in the tumor microenvironment (TME) attenuates antitumor immunity, which promotes tumor cell immunologic escape and progression. Anti-CD39 monoclonal antibodies (mAbs), which suppress the enzymatic activity, can be applied to antitumor therapy. Therefore, an understanding of the relationship between the inhibitory activity and epitope of mAbs is important. We previously established an anti-mouse CD39 (mCD39) mAb, C₃₉Mab-1 using the Cell-Based Immunization and Screening (CBIS) method. In this study, we determined the critical epitope of C₃₉Mab-1 using flow cytometry. We performed the PA tag (12 amino acids)-substituted analysis (named PA scanning) and RIEDL tag (5 amino acids)-substituted analysis (named RIEDL scanning) to determine the critical epitope of C₃₉Mab-1 using flow cytometry. By the combination of PA scanning and RIEDL scanning, we identified the conformational epitope, spanning three segments of 275^th to 279^th, 282^nd to 291^st, and 306^th to 323^rd amino acids of mCD39. These analyses would contribute to the identification of the conformational epitope of membrane proteins.

How crucial is big data in contemporary molecular design? In this publication we elucidate fundamental concepts and terminology in this field, critically addressing overlooked issues. We thoroughly examine the size, accessibility, quality, and structural aspects of big data alongside the primary methodologies employed for their analysis. Within chemical compounds, properties and descriptors represent two distinct data types, forming the basis for categorizing molecular big data. The primary objective of chemistry is property production, which means we are searching for novel drugs or materials rather than chemical compounds, and big data is the central issue of this philosophy. The increasing availability of data in computer-aided technology propels advancements in artificial intelligence (AI), machine learning (ML), and deep learning (DL). Accordingly, a broad chemical audience must comprehend these methods to understand data-centered chemistry. Thus, we aim to systemize big data issues through a simple illustrative framework with fundamental descriptor categories: coding, computer-generated descriptors, and property correlates. Although we employ computer-generated descriptors as big data for predictions, the measured data are irreplaceable for achieving high-quality and reliable outcomes and controlling molecular effects. The scarcity of property data remains a significant hurdle limiting comprehensive studies on the structure-property relationships within big data. Accordingly, guided by pragmatics not-so-big data is an option for drug design. We presented also a brief review of the recent big data literature.

A sensitive and robust electrochemical cholinesterase-based sensor was developed to detect the quaternary ammonium (QAs) biocides most frequently found in agri-food industry wash waters: benzalkonium chloride (BAC) and didecyldimethylamonium chloride (DDAC). To reach the maximum residue limit of 2.8 10-8 M imposed by the European Union (EU), two types of cholinesterases were tested, acetylcholinesterase (AChE, from Drosophila melanogaster) and butyrylcholinesterase (BChE, from horse serum). The sensors were designed by entrapping AChE or BChE on cobalt-phthalocyanine-modified screen-printed carbon electrodes. The limits of detection (LOD) of the resulting biosensors were 3.8 10-8 M for DDAC and 3.2 10-7 M for BAC, using respectively AChE and BChE. A simple solid phase extraction step was used to concentrate the samples before biosensor analysis, allowing the accurate determination of DDAC and BAC in tap water with limits of quantification (LOQ) as low as 1.3 10-9 M and 5.3 10-9 M, respectively. The biosensor was shown to be stable during 3-months storage at 4°C.

Coral reefs are one of the most productive yet vulnerable ecosystems on Earth. An important step in understanding the functioning of coral communities is studying the environmental impact on the state of reefs. The present study aimed to assess the impacts of the water temperature, precipitation, wave action and population density on the seasonal bleaching, partial and complete mortality of shallow-water branching corals of Pocillopora verrucosa species complex. The present study was conducted at the Dam Bay research station (Nha Trang Bay) from 26 April 2020 to 2 April 2021. Throughout the study the percentage of bleached coral colonies varied from 1 to 41.5% with two peaks, in autumn (October) and spring (April). Rates of the development of partial mortality varied from 0 to 10%, with a pronounced peak in December. At the end of the experiment, the percentage of coral colonies suffering from partial mortality reached 47%. Only 4,5% of experimental colonies died by the end of the study. Analysis revealed that water temperature and partial mortality are the drivers of bleaching, while wave action, temperature and bleaching are the factors with a significant impact on partial mortality. In the present study, the main cause of coral death was the development of algal fouling at the sites of colony lesions, which gradually spread over the entire surface of the colony. We showed also that the impact of individual stress on mortality prevailed over the impact of seasonal bleaching and partial mortality events.

Abstract: The present work evaluates the feasibility of using volcanic fly ash (VFA), generated by the eruption of the Tajogaite volcano on the island of La Palma (Spain) in 2021, as a precursor in the preparation of cementitious materials with different Portland cement (PC) replacement levels (0%, 30%, 70% and 100%), in the absence (Blended Cement, BC) and presence of an alkaline ac-tivator (Hybrid Alkaline Cement, HAC, and Alkaline Cements, AC). Hydration kinetics (isother-mal conduction calorimetry), paste mechanical strengths and reaction products were character-ised by XRD, FTIR, TG/DTG and BSEM/EDX. The results obtained indicate that the strengths de-veloped by the hybrid alkaline cements (HAC) are higher than those of the blended cements (BC), especially at the age of 2 days, where 25 MPa was obtained with the replacement of 70% PC by VFA. Alkaline cements (AC, 100% VFA) prepared with 8M NaOH solution as activator reached 40 MPa after 2 days. It was observed that in all the binders, depending on the initial composition of the binder mixture and the percentage of replacement and/or activator, VFA reacts to form cementitious gels, C-A-S-H and N-A-S-H type, which supports its use as a mineral addition to blended cement or as a precursor in the preparation of alkaline and hybrid alkaline cements.

Besides common skin pathogens, acute focal lymphadenitis in humans can be caused by a zoonotic pathogen in rare cases. Furthermore, it can develop in absence of any direct or indirect contact with infected animal in cases when the microorganism is transmitted by vector. This clinical entity is rare, and therefore not easily recognized in most regions, yet many zoonotic illnesses are considered emerging or re-emerging nowadays. Focal zoonotic vector-borne lymphadenitis and its numerous causative agents with their variegated clinical manifestations have been described in some case reports and small case series. Therefore, we tried to summarize those data in this narrative overview, with the aim to rise clinical awareness, which could improve clinical outcomes. This overview briefly covers reported pathogens, their vectors and geographic distribution, as well as their main clinical manifestations, diagnostic possibilities and recommended therapy. Vector-borne tularemia, plague, bartonellosis, rickettsioses, borreliosis and Malayan filariasis are mentioned. According to the existing data, when acute focal bacterial vector-borne zoonotic lymphadenitis is suspected, in severe or complicated cases it seems prudent to apply combined aminoglycoside (or quinolone) plus doxycycline as an empirical therapy, pending definite diagnostic results. In this field the „one health approach” and further epidemiological and clinical studies are needed.

Detailed description of carbonate minerals different in magnesium content of Triassic dolomites were presented in this article. The tests were carried out to determine geochemical and miner-alogical features in the terms of their geoengineering properties. The following carbonate phas-es were identified: a low-Mg calcite, a high-Mg calcite, a proto-dolomite, an ordered dolomite and a huntite. The following research methods were used: microscopic analysis, X-Ray Diffrac-tion, X-Ray Fluorescence and Electron probe microanalysis. The samples were collected from the Tarnowice formation which is the lower part the profile of the Upper Muschelkalk. On the basis of the results the chemical formulas of carbonate phases were calculated. The ranges of Mg and Ca content were presented in formulas. The results indicate of Mg in low-Mg calcite ranges from 0.6 to 1.2%, in high-Mg calcite from 7.47 to 10.41%. In proto-dolomite it ranges from 10.96 to 11.78%. In ordered dolomite Mg content is stoichiometric value for dolomite – 13.18%. Due to the reduced Mg content in identified huntite (the value ranges from 13.62% to 17.76), this carbonate phase was named as de-huntite.

Sustained water management requires quantitative information and the knowledge of spatiotemporal dynamics of hydrological system within the basin. This can be achieved through the research. Several studies have investigated both surface water and groundwater in Beterou catchment. However, there are few published papers on the application of the SWAT modeling in Beterou catchment. The objective of this study was to evaluate the performance of SWAT to simulate the water balance within the watershed. The inputs data consist of digital elevation model, land use maps, soil map, climatic data and discharge records. The model was calibrated and validated using the Sequential Uncertainty Fitting (SUFI2) approach. The calibrated started from 1989 to 2006 with four years warming up period (1985-1988); and validation was from 2007 to 2020. The goodness of the model was assessed using five indices, i.e., Nash–Sutcliffe efficiency (NSE), the ratio of the root means square error to the standard deviation of measured data (RSR), percent bias (PBIAS), the coefficient of determination (R²), and Kling Gupta efficiency (KGE). Results showed that SWAT model successfully simulated river flow in Beterou catchment with NSE = 0.79, R2 = 0.80 and KGE= 0.83 for the calibration process against validation process that provides NSE = 0.78, R2 = 0.78 and KGE= 0.85 using site-based streamflow data. The relative error (PBIAS) ranges from -12.2% to 3.1%. The parameters runoff curve number (CN2), Moist Bulk Density (SOL_BD), Base Flow Alpha Factor (ALPHA_BF), and the available water capacity of the soil layer (SOL_AWC) were the most sensitive parameter. The study provides further research with uncertainty analysis and recommendations for model improvement and provision of an efficient means to improve rainfall and discharges measurement data.

Reactions of N‚N'-bis(3-methylpyridyl)oxalamide (L1), N,N’-bis(3-methylpyridyl)adipoamide (L2) and N,N’-bis(3-methylpyridyl)sebacoamide (L3) with tricarboxylic acids and Cu(II) salts afforded {[Cu(L1)(1,3,5-HBTC)]·H2O}n (1,3,5-H3BTC = 1,3,5-benzenetricarboxylic acid), 1, {[Cu1.5(L2)1.5(1,3,5-BTC)(H2O)2]·6.5H2O}n, 2, [Cu(L2)0.5(1,3,5-HBTB)]n (1,3,5-H3BTB = 1,3,5-tri(4-carboxyphenyl)benzene), 3, [Cu4(L3)(OH)2(1,3,5-BTC)2]n, 4, {[Cu3(L3)2(1,3,5-BTB)2]·2.5MeOH·2H2O}n, 5, and {[Cu3(L3)2(1,3,5-BTB)2 ]·DMF·2H2O}n, 6, which have been structurally characterized by using single crystal X-ray crystallography. Complexes 1 – 4 form a 2D layer with the {44.62}-sql topology, a 2D layer with the (4.62)2(42.62.82)-bex topology, a 3-fold interpenetrated 3D net with the (412.63)-pcu topology and a 3D framework with the (410.632.83)(42.6)2(43.63) topology, respectively, whereas 5 and 6 are 3D frameworks with the (63)2(64.82)(68.85.102) topology. Complex 5 shows a better iodine-adsorption factor of 290.0 mg g-1 at 60 oC for 360 minutes than the other ones, revealing that the flexibility of the spacer ligand governs the structural diversity and the adsorption capacity.

Cathode materials play a key role in the development and application of lithium-ion batteries, but the unfavorable factors such as structural phase transformation and low conductivity in the cycling process restrict the further improvement of battery performance, so the development and modification of high-performance cathode materials is a current research hotspot. LiNixCoyMn1-x-yO2(x≥0.6), a high-nickel cathode material, has the advantages of high platform potential, high energy density and low cost, and is an ideal material to achieve the goal of 300 Wh kg-1 and above for batteries. However, its poor thermal stability, poor interface stability, safety and life cannot meet the requirements of current power batteries. In this paper, the research status of high-nickel cathode materials is introduced, including bulk doping and surface coating, and the modification method of doping and coating integration is also introduced. Finally, we put forward the prospect of the future development trend of high-nickel cathode materials.

The Centers for Disease Control and Prevention (CDC) indicates that individuals with prediabetes are significantly less likely to develop type 2 diabetes if they participate in a lifestyle change program that results in at least 5% weight loss and 150 minutes of physical activity per week. The CDC recognizes distance learning as an effective delivery mode for lifestyle change programs to prevent type 2 diabetes. The purpose of this study was to assess enrollment, engagement, and effectiveness of a type 2 diabetes prevention program (DPP) using synchronous distance technology. Eat Smart, Move More, Prevent Diabetes (ESMMPD) is an intensive 12-month DPP delivered using synchronous distance technology. Throughout 26 lessons, participants focused on healthy eating, physical activity, and mindfulness behaviors. Study findings showed a significant decrease in A1C (-0.24 p<.0001). Weight loss averaged 5.66% for those who completed the program. Based on the Wilcoxon signed-rank test, participants demonstrated statistically significant changes in self-reported confidence in their ability to perform all 18 health-promoting behaviors assessed (p<.0001). Participation in the program also resulted in the adoption of health promoting behaviors. A DPP using synchronous distance technology is an effective delivery mode to help participants adopt healthy behaviors, increase physical activity, and achieve the weight loss necessary to prevent or delay the onset of type 2 diabetes.

Agricultural productivity is expected to decrease under changing climate conditions that correspond to the stability of West African food systems. Although numerous studies evaluated food production gaps or impacts of climate variability on crop yields, many uncertainties are associated with climate extremes, but also rapid population growth and the corresponding dietary lifestyle determine farming activities. Here, we present a food supply and demand analysis based on the relationship between climate change, crop production, as well as population growth in three experimental sites from southwestern Burkina Faso to southwestern Ghana. The method consists of a tiered approach that encompassed a statistical analysis of historical climate as well as agricultural time series using boxplots and a trend test by Mann-Kendall. Food balance sheets were calculated by estimating the demand using a population growth model linked to food supply with local consumption patterns. Results of the boxplot analysis revealed for the majority of climate time series light to strong right-skewed distributions with either a few heavy rainfall or hot temperature events. We found almost insignificant rainfall and temperature trends for both sites in the Sudano-Guinean savannah. The rainfall regime of southwestern Ghana indicated an insignificant upward or downward trend while the temperature significantly increased over time. Crop yield boxplots demonstrated mainly right-skewed distributions for cereals, legumes and tubers as well as cash crops such as cotton. Backed by the Mann-Kendall test, maize and sorghum significantly enhanced in both study areas of the Sudano-Guinean savannah. Southwestern Ghana depicted a different crop pattern where cassava and plantain showed a strong upward trend at a confidence level of 1%. The grouped food balances sheets across the regions illustrated a surplus for the Sudano-Guinean savannah ranging from 221.2 megatons (Mt) to 4,846.77 Mt while southwestern Ghana exhibited a deficit between -193.33 Mt and -16,188.82 Mt. Despite a growing yield of various crops, food demand outpaces the regional production. Hence, it is recommended to focus on a larger array of commodities, imports and marketing of farm products.

Diabetic retinopathy (DR) is a progressive blinding disease that affects vision and quality of life of patients and severely impacts society. This complication, caused by abnormal glucose metabolism, leads to structural, functional, molecular, and biochemical abnormalities in the retina. Oxidative stress (OS) and inflammation also play pivotal roles in the pathogenic process of DR, leading to mitochondrial damage and decrease in the mitochondrial function. DR causes retinal degeneration in glial and neural cells, while the disappearance of pericytes in retinal blood vessels leads to modifications in vascular regulation and stability. Clinical changes include dilatation and blood flow alterations in response to the reduce in retinal perfusion in retinal blood vessels, leading to vascular leakage, neovascularization and neurodegeneration. Thus, DR is a highly complex disease with various biological factors that contribute to its pathogenesis. The interplay between biochemical pathways and non-coding RNAs (ncRNAs) is essential for understanding the development and progression of DR. Abnormal expression of ncRNAs has been confirmed to promote the development of DR, suggesting that ncRNAs such as miRNAs, lnc-RNAs and circ-RNAs have potential as diagnostic biomarkers and theranostic targets in DR. This review provides an overview of interactions between abnormal biochemical pathways and dysregulated expression of ncRNAs under the influence of hyperglycemic environment in DR.

Hepatitis C virus (HCV) is diffused worldwide, and it is responsible for potentially severe chronic liver disease and primary liver cancer. Chronic infection remains for life if not spontaneously eliminated and viral persistence profoundly impairs the efficiency of host’s immunity. Attempts have been made to develop an effective vaccine, but efficacy trials have met with failure. The availability of highly efficacious direct acting antivirals (DAA) has shed hopes for progressive elimination of chronic HCV infection; however, this approach requires a global monumental effort. Moreover, DAA treatment does not completely restore the normal immunologic homeostasis. Here we discuss the main immunological features of immune responses to HCV and the epigenetic scars that chronic viral persistence leaves behind.

Hepatic Encephalopaty (HE) is a common complications of advanced liver disease and acute liver failure. It is a condition that features both neurological and psychiatric symptoms, that affects mortality, morbidity and quality of patients and caregivers’ life. HE diagnosis is generally an exclusion diagnosis. Once the patient is admitted to hospital, clinical examination, blood tests and eventually neuroimaging should be performed in order to rule out other causes of acute brain dysfunction. Moreover, HE recognizes various precipitants that can potentially promote its onset, alone or in combination, that must be identified. Once the diagnostic process is complete, a correct treatment should be started. The anti-HE treatment is based on a combination of correction of precipitants and non-absorbable disaccharides and non-absorbable antibiotic, such as rifaximin. Once the patient is discharged from the hospital, specific anti-HE therapy should be maintained in order to prevent other HE episodes.

Plastics have recently become an indispensable part of everyone's daily life due to their versatility, durability, light weight and low production costs. The increasing production and use of plastics poses a great danger due to the very long period of degradation, but also the negative impact on living organisms. Decomposing plastics lead to the formation of microplastics, which accumulate in the environment and living organisms becoming part of the food chain. Polyvinyl chloride (PVC) contamination of soil and water seriously threatens ecosystems around the world. The durability and low weight make microplastic particles easily transported with water or air and end up in the soil. Thus, the problem of microplastic pollution affects the entire ecosystem. Since microplastics are commonly found in both drinking and bottled water, humans are also exposed to the harmful effects of microplastics. Because of the existing risks associated with PVC microplastic contamination of the ecosystem, intensive research is underway to develop methods to clean and eliminate it from the environment. Pollution of the environment with plastic, especially microplastic, results in the reduction of both water and soil resources used for agricultural and utility purposes. This review provides an overview of PVC's environmental impact and disposal options.

Tuberculosis (TB) caused by Mycobacterium tuberculosis remains a predominant cause of mortality, especially in low- and middle-income nations. Recently antimicrobial peptides were discovered that at low concentrations could stimulate the growth of M. tuberculosis (hormetic response). In this study, such a peptide was used to investigate the effects on the time to positivity (TTP). A systematic substitution analysis of peptide 14D was synthesized using Spot synthesis technology, resulting in 171 novel peptides. Our findings revealed a spectrum of interactions, with some peptides accelerating M. tuberculosis growth, potentially aiding in faster diagnostics, while others exhibited inhibitory effects. Notably, peptide NH2-wkivfiwrr-CONH2 significantly reduced the TTP by 25 hours compared to the wild-type peptide 14D, highlighting its potential in improving TB diagnostics by culture. Several peptides demonstrated potent antimycobacterial activity, with a minimum inhibitory concentration (MIC) of 20 µg/mL against H37Rv and a multidrug-resistant M. tuberculosis strain. Additionally, a reduction in the formation of cord-like structures was observed, which is indicative of reduced virulence and transmission potential. This study underscores the multifaceted roles of antimicrobial peptides in TB management, from enhancing diagnostic efficiency to offering therapeutic avenues against M. tuberculosis.

Gullele Botanic Garden was established to preserve and safeguard indigenous, rare, endemic and endangered plant species that have economic significance. A study was conducted to identify and map non-native plant species that exist in various land use types, including natural vegetation, plantation, roadside, and garden edges. The research involved placing plots at different distances in each land use type and collecting vegetation data with geo-location information for exotic and invasive species. The data was analyzed using Sorensen's similarity index to measure the similarity between plant communities. Invasive species were identified using ArcGIS, and descriptive statistical methods were employed to analyze the remaining data. The recorded a total of 80 plant species belonging to 70 genera in 44 families in the garden, with Fabaceae and Asteraceae having the most species. Acacia decurrens, Acacia melanoxylon, Cuscuta campestris, Galinsoga parviflora, Nerium oleander, and Cyathula uncinulata are the most prevalent invasive or potentially invasive species among the species that have been documented. These species are spreading quickly and may displace native plant species if not properly managed. The study found that roadside and garden edge land use types had the most diverse exotic plants, with Acacia decurrens, Nerium oleander, Acacia melanoxylon, Agave species, Cyathula uncinulata, and Eucalyptus species being the most dominant exotic species in the garden. The total density of exotic species was 2.36 plants/m2. The study provides valuable information for managing and conserving both native and exotic plant species in the garden.

The effects of four cycles of recurrent selection on simple sequence repeat (SSR) marker allele frequencies and population structure were examined in the Maksimir 3 Synthetic (M3S) maize population (Zea mays L.). Genotyping of 32 plants from each cycle of selection at 38 SSR loci revealed that the mean number of alleles per locus and the mean expected heterozygosity were preserved over cycles of selection, indicating maintenance of sufficient genetic variability in the population needed for future genetic gain. Waples test of selective neutrality revealed that genetic drift was the main force in changing allele frequencies in the population. The proportion of selectively nonneutral loci in single cycles of selection varied between 16% and 37%. Some nonneutral loci shared the same genomic locations with previously published QTLs controlling important agronomic traits. Between 5% and 29% of loci were found to be in significant Hardy-Weinberg (HW) disequilibrium with the majority showing an excess of homozygosity. Excess of homozygosity at several loci was highly consistent across cycle populations suggesting positive assortative mating as the possible cause of the observed HW disequilibrium. Linkage disequilibrium (LD) tests revealed that the M3S population was essentially in linkage equilibrium. The proportion of pairs of loci in significant LD varied across cycles of selection between 0.1% and 1.8% probably due to the effects of genetic drift and epistatic selection.

Minerals are the chief constituents of rocks and they have varied properties such as surface area, surface charge, site densities etc. Hence, numerous interactions are bound to occur in the reservoir during rock-fluids (i.e., rock, crude oil and brine) interactions. This study seeks to assess the role of mineralogical composition on the wettability of Sandstone Rocks (SR) and Mineral Mixture (MM) using both Surface Complexation Modelling (SCM) and flotation test. From the considered sandstone rocks, both the experimental results and its simulated counterpart revealed that, the SR were preferentially hydrophilic. For the MM, when the mass fraction of the hydrophobic mineral was increased, the affinity of the MM became slightly hydrophobic and vice-versa. For the dominant sandstone reservoir rock minerals with predominantly negatively charged surfaces, negligible oil adsorption took place due the interfacial repulsive forces at the oil-brine and mineral-brine interfaces. For the MM with low calcite content, the wetting preference was influenced by the mineral with prominent surface area. Our developed model portrayed that the main mechanism for oil adhesion onto sandstone minerals was divalent cations bridging. Nonetheless, adhesion of carboxylate (&gt;COO-) onto the illite, montmorillonite and calcite sites also took place with the latter being more pronounced.

Natural fibers have attracted increasing interest as an alternative to produce environmentally friendly and sustainable materials. Particularly, hemp fibers have revealed to be widely used in various industrial applications due to their extremely unique properties. However, hemp can generate a large amount of agro-waste, and results in an attractive source of biopolymers for the development of low-cost materials in alternative to the raw materials and conventional petroleum-based plastics. In addition, deep eutectic solvents (DESs), a new type of truly green solvents, have been tested to remove gums, lignin, and other non-cellulosic components from hemp fibers. Reusing these components dissolved into the DESs to fabricate new materials directly by electrospinning is a very attractive but still unexplored endeavor. Thus, this innovative research to venture new upcycling pathways is focused on the fabrication of composite nanofibers by electrospinning of a gel-based blend of Poly(vinyl alcohol) (PVA) and hemp agro-waste (HW) dissolved into choline chloride (ChCl) : Glycerol (1:2) and ChCl : Urea (1:2) DES mixtures. The results obtained revealed that the produced nanofibers displayed uniform appearance with diameters ranging from 257.72 ± 65.63 nm to 380.78 ± 133.98 nm. In addition, the mechanical properties of the electro-spun composite nanofibers produced from the gel-based blends of HW dissolved in DESs and PVA (HW-DESs_PVA) were found to be superior, resulting in an enhanced tensile strength and Young’s modulus. Furthermore, the incorporation of HW into the nanofibers was able to provide bioactive antioxidant and antibacterial properties. Overall, this study demonstrated a promising, more sustainable, and eco-friendly way to produce electrospun composite nanofibers using HW in a circular economy perspective.

The Power Theory of Exchange and Money (PTEM) refines the economic neoclassical two-equation model of exchange. PTEM replaces the statistical average condition of exchange, which represents the equality of supply and demand for all transactions in the market, with a more specific equation of the equality of the generalized power of the parties in relation to their objects of exchange. The purpose of the article is to show the application of PTEM for the study of various social phenomena. Along with a brief summary of the main statements of this theory, its integration into the existing corpus of theories and ideas in economics and sociology is considered. The conclusions of power theory are then applied to consider the following topics: the objective motivation of exchange by the desire to increase power, the power nature of market equilibrium, the power nature of money, the accumulation of power through profit, the creation of money as a power act, the role of the state in the creation of money, the measure of power as a possible tool for social and political research.

Crop digital twin is redefining traditional farming practices, offering unprecedented opportunities for real-time monitoring, predictive and simulation analysis, and optimization. This research embarks on an exploration of the synergy between precision agriculture, crop modeling, and regression algorithms to create a digital twin for augmenting farmers the concentration and composition prediction-based crop nutrient recovery. This captures the holistic representation of crop characteristics, considering the intricate relationships between environmental factors, nutrient concentrations, and crop compositions. However, the complexity arising from diverse soil and environmental conditions makes nutrient content analysis expensive and time-consuming. This paper presents the result of a predictive digital twin case study that employs six regression algorithms namely Elastic Net, Polynomial, Stepwise, Ridge, Lasso, and Linear Regression to predict rice nutrient content efficiently, particularly considering the coexistence and composition of multiple nutrients. Our research findings highlight the superiority of the Polynomial Regression model in predicting nutrient content, with a specific focus on accurate nitrogen percentage prediction. This insight can be used for nutrient recovery intervention by knowing the precise amount of nutrient to be added into the crop medium. The adoption of the Polynomial Regression model offers a valuable tool for nutrient management practices in the crop digital twin, potentially resulting in higher-quality rice production and a reduced environmental impact. The proposed method can be replicable in other low-resourced crop digital twin system.

Recently considered modifications to public policy and trends in technology transfer practices have underscored the need for validated instruments to assess the maturity of technologies. This paper details a study that aimed to develop and present a generalized technology readiness level (GTRL) scale that a variety of professionals and researchers could use to assess the maturity of technologies in a range of contexts. Of particular interest is developing and validating an instrument that technology transfer professionals in federal laboratories, universities, and the private sector in the United States of America can use to assess the maturity of technologies to facilitate their technology transfer efforts. The primary goal of the research study was to highlight the need for validated measurement instruments for assessing the maturity of technologies in these contexts, test methods for validating the GTRL scale and other readiness level scales, and fill the knowledge gap regarding methods for properly validating such instruments. This included producing insights to inform future efforts to validate the GTRL scale as well as efforts to develop and validate other instruments to measure technology maturity. The study provides specific recommendations relevant to determining the face validity, content validity, inter-rater reliability, and intra-rater reliability of the GTRL scale and other such instruments for assessing technology maturity.

The contamination of aquatic environments by pharmaceutical products consistently takes the attention of researchers due to the compounds' toxicity even at low concentrations. In response, we have developed an ecologically sustainable biosurfactant derived from a microorganism and incorporated into the bacterial cellulose. This bioproduct, along with the bacterial cellulose itself, was employed as a sorbent for pharmaceuticals (hormones and paracetamol) present in water. Bacterial cellulose membranes were generated through the cultivation of Gluconacetobacter xylinus ATCC 53582. The biosurfactant was produced by pre-inoculating Bacillus subtilis in a synthetic medium, followed by immersing the bacterial cellulose membranes in the biosurfactant solution, for incorporation. Tests were conducted using water experimentally contaminated with parace-tamol and 17α-ethinylestradiol (EE2), evaluating the biosurfactant's effect on bacterial cellulose sorption. Paracetamol levels were analyzed using spectrophotometry, and EE2 levels were as-sessed using high-performance liquid chromatography. In summary, bacterial cellulose exhibited superior adsorption for EE2 compared to paracetamol. The incorporation of biosurfactant onto bacterial cellulose reduced hormone adsorption but enhanced paracetamol sorption. Our findings indicated that adsorption is more effective with bacterial cellulose in its original and freeze-dried forms, without the incorporation of biosurfactant. Notably, we achieved more promising results in remediating the hormone EE2 compared to the paracetamol.

The COVID-19 outbreak demonstrated the viability of various remote working solutions, telepresence robots (TPRs) being one of them. High-quality video transmission is one of the cornerstones of using such solutions, as most of the information about the environment is acquired through vision. This study aims to compare the camera capabilities of four models of popular telepresence robots using compact reduced LogMAR and Snellen optometry charts as well as text displayed on the projector screen. The symbols from the images are extracted using OCR (Optical Character Recognition) software and the results of the recognition are compared with the symbols on the charts. Double 3 TPR provides the best quality images of optometric charts, but the OCR results of measurements of the image on the projector do not show the clear advantage of one single model over the others. The results demonstrated by Temi 2 and Double 3 TPRs are generally better than the others, suggesting that these TPRs are more feasible to be used in teaching and learning scenarios.

Understanding aspects of maritime/underwater cultural heritage (MUCH) and the associated cultural values and integrating them into maritime spatial planning (MSP) endeavors, is a new global challenge, alongside the rapid increase of human activities at sea and climate change impacts on the seas and the oceans. The article highlights the significance of cultural values in shaping human interactions with the marine environments, and how MSP can address the cultural dimensions of marine resources management. To this end, a systematic literature review was carried out to address the research question on how maritime/underwater cultural heritage is incorporated into MSP and map relevant academic literature. Following, a methodology that entailed an academic database search and the application of exclusion criteria, 346 articles resulted from Scopus. These articles were classified using science mapping techniques (i.e the VOSviewer Software ) and several categories (clusters) were created. The research showed a diversity of literature addressing the relationship between MUCH and MSP with a strong focus on sustainability, the significance of cultural ecosystem services (CES) and cultural values, the role of indigenous and local communities, but also of local stakeholders, the transfer of traditional knowledge to MSP and the participatory approaches and tools. The article concludes that for MSPlans to be innovative and acceptable by local communities, the “missing layer”of socio-cultural values and data is indispensable. In the MSP process, MUCH should be understood within this broader framework of socio-cultural considerations and values.

The lack of a generalizable machine learning model for predicting the safety of food for 1 human consumption is a significant challenge for policymakers and responsible authorities. This 2 study provides a step-by-step guide to predict the results of seafood product import inspections, 3 focusing on identifying and understanding the critical factors that influence these results. By compar- 4 ing the performances of an ensemble of machine learning models, this study combines the strengths 5 of multiple algorithms to improve the predictive accuracy and gain insights into the key factors 6 impacting them. The ensemble model based on the soft voting technique achieves superior perfor- 7 mance to that based on the hard voting technique in terms of the recall and area under the curve 8 (AUC) scores. The study discovered that various characteristics, such as the exporting country ratio, 9 major product category, overseas manufacturer ratio, importer ratio, and seasonal variation, had a 10 substantial influence on the models’ decisions. This research guide for predicting seafood product 11 import inspection results could pave the path for other items to follow.

We describe real-world use of mavacamten in 50 patients with oHCM. Consistent with EXPLORER-HCM and VALOR-HCM, we report significant improvement in wall thickness, mitral regurgitation, left ventricular outflow tract obstruction and NYHA class. Moreover, in our center’s experience, neither arrhythmia burden, nor contractility have worsened in the vast majority of patients: We note a clinically insignificant mean decrease in left ventricular ejection fraction (LVEF), with only two patients requiring temporary mavacamten discontinuance for LVEF < 50%. Adverse events were rare, unrelated to mavacamten itself, and seen solely in patients with disease too advanced to have been represented in clinical trials. Our multidisciplinary pathway enabled us to provide a large number of patients with a novel closely-monitored therapeutic within just a few months of commercial availability. These data lead us to conclude that mavacamten, as a first-in-class cardiac myosin inhibitor, is safe and efficacious in real-world settings.

In this paper, we obtain the existence and uniqueness theorem for solutions of Caputo type fractional stochastic delay differential systems (FSDDSs) with Poisson jumps by utilizing delayed perturbation of Mittag-Leffler function. Moreover, by using Burkholder-Davis-Gundy's inequality, Doob's martingale inequality and Holder inequality, we prove that the solution of the averaged FSDDSs converges to that of the standard FSDDSs in the sense of Lp. Some known results in the literature are extended.

Goji berries, long valued in Chinese medicine and cuisine for their wide range of medicinal benefits, are considered a 'superfruit' and functional food. Out of the nearly 100 Lycium species known for their genetic diversity, L. barbarum and L. chinense currently dominate the market. Due to increasing market demand and concerns about food safety and sustainability, Europe and the Americas are expanding the local goji berry production, using as starting material plants originated from China. European breeding programs are focusing on Lycium to develop varieties adapted to local conditions, especially in response to climate change. By 2023, Romania registered seven goji berry varieties, both from L. barbarum and L. chinense species, without incorporating local germplasm. Advanced genomic studies, including NGS sequencing of five cultivated and three wild goji berry plant genomes, have been conducted to analyse their genetic variation, with a particular focus on the BODYGUARD 3 and 4 genes. This research uncovered significant differences between cultivated and wild genotypes, both in the entire genome and specifically in the BODYGUARD genes, providing crucial insights for goji berry breeders to support the development of goji berry cultivation in Romania.

(1) Background: This study aimed to outline the antitumoral, antioxidant, and cytotoxic proprie-ties of various types of Perilla frutescens extracts obtained from the leaves of the species; (2) Methods: We determined total polyphenols, flavonoids and anthocyanins contents, as well as the in vitro antioxidant, antitumoral, and cytotoxic actions in 3 types of ethanolic extracts (E1, E2, E3) and in 3 types of ethanol: acetone extracts (A1, A2, A3) of Perilla frutescens according to standardized procedures; (3) Results: We found that Perilla frutescens ethanolic extracts had higher total phenol concentrations (p= 0.002). Flavonoids and anthocyanins concentrations were not statistically different between the two extracts. The iron chelating capacity, hydroxyl radical scavenging capacity, superoxide anion radical scavenging capacity, and lipoxygenase inhibition capacity showed a significant increase with higher concentrations of Perilla frutescens extracts, particularly the ethanolic extracts. Perillyl alcohol had greater cytotoxic capacity on MG-63 cell line and E1 extract showed similar significant cytotoxic effects on A431 cell line; (4) Conclusions: Both ethanolic and ethanol: acetone extracts from Perilla frutescens exhibited important antioxi-dant and antitumoral actions in vitro, which proportionally increased with concentration. The cytotoxic threshold determined in this study for various types of extracts could help determine the best dosage with the maximum antioxidant and antitumoral potential.

For the parentage testing in canine microsatellite length polymorphism markers were used to check the efficacy of the markers. In the current study 5’ fluorescently labeled 12 SSR markers were used to check the use of the markers in popular owned-dog breeds (Labrador, German Shepherd, Pug, Mudhol Hound, Tibetan Mastiff, Gaddi dog, Beagle, Belgian Malinois, Pointer, and Cane Corso) maintained of India (not necessarily indigenous breeds). The number of alleles, heterozygosity, polymorphism information content, and probability of exclusion were determined for all the markers to check the effectiveness of the markers. The mean number of alleles per locus ranged from 5 to 29 and the effective number of alleles ranged from 3.6 to 15.2. The expected heterozygosity was greater than 0.73. The population inbreeding coefficient (FIS) demonstrated that there was no inbreeding in the breeds studied, as the samples were collected from owners and dog breeders belonging to various states, including Punjab, Haryana, Himachal Pradesh, and Karnataka. The polymorphism information content and the probability of the exclusion values were greater than 0.65. the combined probability of exclusion for all the breeds was (2.82E-12) 0.99999995. The results indicated that the selected 12 markers are effective enough to determine the parentage of the dogs.

In exploring the intricacies of financial analysis, this study delves into the efficacy of traditional financial ratios versus cash flow ratios in foreseeing a company's fiscal well-being. By harnessing the PRISMA 2020 framework, an exhaustive and systematic dissection of diverse scholarly articles was embarked upon. The quest was to unearth the more reliable predictor of financial stability among these two sets of ratios. With a methodical examination of academic writings, this inquiry juxtaposed various models, scrutinizing their foresight capabilities. The revelations were telling; cash flow ratios emerged as more potent forecasters compared to their traditional counterparts. Intriguingly, models that blend both ratio types showed a marked improvement in predictive accuracy, hinting at a synergistic effect. This underscores the insight that while traditional ratios are informative, their amalgamation with cash flow ratios yields a richer, more rounded grasp of a company’s fiscal state. Conclusively, for stakeholders, especially investors, adopting this dual-ratio approach is pivotal for enlightened decision-making. This research enriches the financial analysis domain by spotlighting the salience of cash flow ratios, advocating for their integration with conventional methods for a sharper financial health appraisal.

An enormous interest in the development of efficient protocols for cellulose extraction has been demonstrated in the last years, however, they were usually based on non-sustainable chemical and thermal approaches. In this work we describe a new and more sustainable method for cellulose extraction from eucalyptus and pine tree wood waste products exclusively performed using microwave-assisted radiation. The methodology includes 3 main steps: i) alkaline treatment; ii) bleaching I, using H2O2; and iii) bleaching II, an acidic treatment. Samples obtained in each step were characterized by Fourier-transform Infrared (FTIR) spectroscopy, powder X-ray diffraction (PXRD), thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). The results were compared with those of starting materials, with the commercially available microcrystalline cellulose and with an industrial paper pulp. Results confirmed that for both type of wood wastes, cellulose was retained during the extractions procedures and that the removal of hemicellulose was achieved at the last step as seen by the FTIR spectra and TGA curves. The developed protocol is innovative since it constitutes an easy and quick approach to extract cellulose, from eucalyptus and pine tree wood waste using mild chemical and thermal conditions, microwave irradiation, and environmentally friendly purification steps. This approach offers the possibility of a future scale-up study to potentially apply the develop protocol to the extraction of cellulose in an industrial scale.

Microplastics (MPs) pollution has become a persisting problem over the last decades and a critical issue for environmental protection and human health. In this context any scientific data able to reveal the MPs presence and to improve the characterization and identification in different systems is valuable. The aim of this paper was to assess available techniques for determining MPs in real freshwater samples and subsequently to highlight the occurrence and type of MPs in the study case area (Somesul Mic River). The specific objectives of the study were: i) MPs separation and visual characterization; ii) microscopic analyses and morphological characterization of MPs; iii) Raman and FT-IR spectroscopic identification of MPs. MPs sampling was performed from the fresh water and sediment using planktonic nets and sieves with different mesh sizes (20 to 500µm). After digestion with hydrogen peroxide, the MPs characterization was performed using both classical microscopic techniques as well as scanning electron microscopy (SEM). For the MPs identification, Raman and FT-IR spectrometry techniques were used. Large (1-5 mm) and small (1 µm to 1 mm) MPs were observed in the shape of fibers, fragments, foam, foils and spheres in various colors (red, green, blue, purple, pink, white, black, transparent, opaque). Polymers were identified related to scientific literature and reference spectra. The presence of polyethylene (PE), polypropylene (PP) and polystyrene (PS) was registered for all sampling point. The MPs laboratory investigations have raised some issues regarding the identification of MPs particles with the size smaller than 500µm, being characterized especially under microscope. Small MPs particle dispersed on cellulose filter were identified using micro-Raman spectroscopy highlighting the same type of polymers. The results showed that both spectrometric methods Raman or FT-IR confirm the identification of the same type of polymers. No differences were registered between the sampling points due to the widespread presence of MPs. The sediments samples presented a greater abundance compared to the water samples. Overall, it is necessary to continue the optimization of the MPs separation protocol and identification according to the complexity of samples, mainly due to the limitation and lack of spectral databases.

Cissus populnea Guill. & Perr. (Vitaceae) is used in traditional medicine to treat microbial infec-tions, venereal diseases, and infertility, among others. The aim of the research is to isolate and characterize the antimicrobial constituent(s) from the stem of C. populnea. The n-butanol fraction of C. populnea being most active was subjected to silica gel column chromatography which led to the isolation of a white solid and white crystalline substances coded compounds C1 and C4C5, respectively. Spectral analysis (1D & 2D-NMR) of the isolated compounds and comparison with literature data indicated C1 to be Bis-(2-ethyloctyl)-phthalate and C4C5 to be a mixture of stig-masterol and β-sitosterol; C4C5 exhibited zone of inhibition ranging from 24 – 29 mm against the test organisms with Candida albicans being the most sensitive organism while Trichophyton rubrum was the least sensitive organism. The standard drugs, Ciprofloxacin had 27 – 37 mm while Flu-conazole and Fulcin exhibited zone of inhibition ranging from 34 mm and 29 – 32 mm, respec-tively. The MIC and MBC/MFC values for C4C5 ranges from 12.5 – 25.0 µg/cm3 and 25.0 – 50.0 µg/cm3 against MRSA, S. aureus, E. coli, C. albicans, T. rubrum, and T. mentagrophyte, respectively. In conclusion, three bioactive compounds were identified for the first time from the stem of C. populnea

The coronavirus disease 2019 (COVID-19), instigated by the zoonotic Severe Acute Respiratory Syndrome Coronavirus 2 (SARS-CoV-2), rapidly transformed from an outbreak in Wuhan, China, into a widespread global pandemic. A significant post-infection condition, known as ‘long- COVID’, emerges in a substantial subset of patients, manifesting with a constellation of over 200 reported symptoms that span multiple organ systems. This condition, also known as 'post-acute sequelae of SARS-CoV-2 infection' (PASC), presents a perplexing clinical picture with far-reaching implications, often persisting long after the acute phase. While initial research focused on the immediate pulmonary impact of the virus, the recognition of COVID-19 as a multiorgan disruptor has unveiled a gamut of protracted and severe health issues. This review provides a summary of the primary effects of long COVID on the cardiovascular, nervous, and respiratory systems. It also delves into the mechanisms underlying these impacts and underscores the critical need for a comprehensive understanding of long COVID's pathogenesis.

The paper presents the observational, remote sensing and model simulation to analyze Southern Brazil Antarctic Ozone Hole influence (SBAOHI) events occurred between 2005 and 2014. To an-alyze it we use Total Ozone Column (TOC) data provide by Brewer Spectrophotometer (BS) and OMI (Ozone Monitoring Instrument) instrument satellite, besides the AURA/MLS (Microwave Limb Sounder) instrument satellite ozone profiles was utilized with DYBAL (Dynamical Barrier Localization) code in MIMOSA (Modélisation Isentrope du transport Mésoéchelle de l’Ozone Stratosphérique par Advection) model Potential Vorticity (PV) fields. TOC has 7.0 ± 2.9 DU re-ductions average in 62 events. October have more events (30.7%). Polar Tongue events are 19.3% of total, being in October more frequently observed (50% of cases), with medium intensity (58.2%) and in stratosphere medium levels (55.0%). Already Polar Filament events (80.7%) are more frequent in September (32.0%), medium intensity (42.0%) and in stratosphere medium lev-els (40.7%). ENSO index positive phase influenced 61.3% of events, having dominance in all in-tensity categories (minor 57.9%, medium 51.6%, major 58.3%), while the equilibrium dominate the QBO influence with 50% of total cases in positive phase and 50 % in negative phase.

In our previous work, we demonstrated the potential of the amphiphilic cyclic peptide [W4R4] as a promising antimicrobial agent. The extensive data accumulated on the antimicrobial activity of this peptide and its homologs presented an opportunity to unravel the molecular mechanisms governing their action and establish crucial structure-activity relationships (SAR). To achieve this, we employed a comprehensive approach involving peptide synthesis, in vitro biological testing, and molecular modeling to systematically analyze the SAR of a series of cyclic peptides derived from the [W4R4] scaffold. Minimal modifications were introduced to the original peptide by incorporating either one aromatic hydrophobic residue (W) or one polar positively charged residue (R) while maintaining the sequential W/R arrangement. Additionally, we introduced an "intermediate" substitution by incorporating 2,5-diketopiperazine (DKP), possessing both aromatic and polar properties, into the macrocycle [W4R4] between the W and R residues. Notably, this study marked the first synthesis and evaluation of the [W4R4(DKP)] peptide. Structural, dynamic, hydrophobic, and membrane-binding properties of four cyclic peptides ([W4R4], [W5R4], [W4R5], [W4R4(DKP)]) were explored using molecular dynamics simulations within a DOPC/DOPG lipid bilayer that mimics the bacterial membrane. The results obtained revealed distinct SAR profiles for all peptides, enabling the establishment of correlations between their antimicrobial activity and structural/dynamic parameters. These parameters included the degree of conformational plasticity, the depth of immersion into the bi-layer, and the population of the membrane binding mode characterized by the embedding of the hydrophobic peptide pattern into the acyl chain region of lipids. In particular, the peptide [W4R5] exhibited an optimal "activity/binding to the bacterial membrane" pattern. This work highlights the significance of our multidisciplinary approach in efficiently deciphering finely regulated SAR profiles for a series of homologous peptides with diverse activities. Furthermore, this research provides a solid foundation for the rational design of novel antimicrobial peptides.

The structural evolution and phase composition of multi-block thermoplastic polyurethanes, with different nature of the soft segments based on poly(butylene adipate) (PBA), were analyzed during in-situ thermal treatments. A combination of synchrotron small- and wide-angle X-ray scattering, differential scanning calorimetry, thermogravimetric analysis, and FTIR spectroscopy was used to determine the influence of macrodiol nature and crystallization conditions on the polymorphic behavior of PBA. Using a new synthesis scheme, a relatively high degree of crystallinity for urethane blocks was achieved, which depends on the diisocyanate type in the structure of the soft segment. The hard segment domains impose geometrical constraints on PBA, thereby altering its crystallization process compared to the neat oligomer. Thus, crystallization after annealing at a low temperature (80 °C) is fast, predominantly yielding a metastable β-phase. When heated to 180 °C, which is higher than the hard-segment melting temperature, a phase-separated structure is observed. Subsequent crystallization is slower, favoring the formation of the stable α-PBA modification. The phase separation can be observed even after the hard block melting. A notably slow crystallization from an isotropic melt was documented after the disruption of phase separation at 230 °C.

This study determined the temporal variation of PM2.5 in ambient air in Thohoyandou and further assessed the associated health risks. The levels of PM2.5 were quantified for a period of 1 year (April 2017-April 2018) using the gravimetric method. There was no significant difference (P-value = 0.18) in concentrations of both PM2.5 samples collected during weekdays (11.29 µg.m-3) and weekends (9.86 µg.m-3). However, higher concentrations of PM2.5 were measured in spring and the lowest was measured in summer. The cancer risk obtained for PM2.5 (2.21 × 10−5, 3 × 10-4, and 5 × 10-4 for infants, children, and adults respectively) in the outdoor air of Thohoyandou has exceeded the limit values by the USEPA and WHO, implying a significant risk for the whole population. For non-carcinogenic risks, the HQ values were 2.60, 4.81, and 2.60 for infants, children, and adults respectively. The HQ value &gt;1 indicates a non-carcinogenic risk to the residents in Thohoyandou and a higher risk to children. Moreover, PM2.5 in Thohoyandou is responsible for 0.15% and 0.13% of deaths resulting from cardiovascular disease and lung cancer respectively for adults above 30 years. PM2.5 is causing adverse health effects in Thohoyandou as deduced from the health risk assessment. Therefore, it is recommended that further epidemiological studies be conducted in Thohoyandou to estimate the burden of disease due to exposure to particulate matter and suitable controlling policies be arranged to reduce particulate matter.

Atrial fibrillation (AF) is a cardiac arrhythmia caused by electrophysiological anomalies in the atrial tissue, tissue degradation, structural abnormalities, and comorbidities. A direct relation exists between AF and altered mitochondrial activity resulting from membrane potential loss, contractile dysfunction, or decreased ATP levels. This review aimed to elucidate the role of mitochondrial oxidative mechanisms in AF pathophysiology, the impact of mitochondrial oxidative stress on AF initiation and perpetuation, and current therapies. This review followed the Preferred Reporting Items for Systematic Reviews and Meta-Analysis Extension for Scoping Reviews. PubMed, Excerpta Medica Database, and Scopus were explored until June 2023 using "MESH terms." Bibliographic references from relevant papers were also included. Oxidative stress is an imbalance that causes cellular damage from excessive oxidation, resulting in conditions such as AF. An imbalance in reactive oxygen species production and elimination can cause mitochondrial damage, cellular apoptosis, and cardiovascular diseases. Oxidative stress and inflammation are intrinsically linked, and inflammatory pathways are highly correlated with the occurrence of AF. AF is an intricate cardiac condition that requires innovative therapeutic approaches. The involvement of mitochondrial oxidative stress in the pathophysiology of AF introduces novel strategies for clinical treatment.

The rapid expansion of social media and instant messaging applications, such as WhatsApp, has transformed how individuals and organizations communicate and engage. This think piece explores the potential of integrating WhatsApp as a customer relationship management (w-CRM) tool within the education sector to foster and sustain long-term relationships among students, teaching staff, and non-teaching staff. By leveraging real-time features and the widespread use of WhatsApp, educational institutions can create a more interactive and dynamic learning environment, benefiting all stakeholders involved. The literature highlights the importance of establishing clear frameworks for mutual engagement and interaction and the potential of w-CRM to improve communication between students' families and educational institutions. There are potential risks associated with the pervasive use of WhatsApp, and call for future research to explore strategies for mitigating these risks while maximizing the benefits of w-CRM in the education sector. Longitudinal studies are recommended to evaluate the long-term impact of w-CRM on stakeholder relationships, student outcomes, and overall institutional performance.

A recent study published in Nature Medicine (Mautner et al., Nat Med 2023 Nov 2. doi: 10.1038/s41591-023-02632-w. Epub ahead of print) reported findings regarding a four-arm parallel, multicenter, single-blind, randomized, controlled clinical trial with 480 patients, aimed at comparing the therapeutic effectiveness of orthobiologic interventions against corticosteroid injections for the treatment of knee osteoarthritis (OA). The study concluded that, one-year post-treatment, all orthobiologic therapies examined were equivalent in effectiveness to each other and to corticosteroid injections. While we commend the scope and methodological rigor of the trial, the publication could be enhanced by a more comprehensive presentation of data to support the conclusions drawn. Particularly, the omission of baseline data for primary outcomes, the missing context to evaluate absolute values, the lack of discussion regarding interindividual variability, and the unexpectedly favorable results for corticosteroids that contrast the established literature, are areas that merit additional examination and insight. Here we aim to highlight these points for consideration, and advocate for the release of supplementary data to facilitate a comprehensive understanding and utilization of this rich dataset.

Acute myeloid leukemia (AML) is a rare subtype of acute leukemia in the pediatric and adolescent population but causes disproportionate morbidity and mortality in this age group. Standard chemotherapeutic regimens for AML have changed very little in the past 3-4 decades, but addition of targeted agents in recent years have led to improved survival in select subsets of patients as well as a better biologic understanding of the disease. One key paradigm of bench-to-bedside practice in the context of adult AML currently is the focus on leukemia stem cell (LSC)-targeted therapies. Here we review current and emerging immunotherapies and other targeted agents that are in clinical use for pediatric AML, through the lens of what is known (and not known) about their LSC-targeting capability. Based on a growing understanding of pediatric LSC biology, we also briefly discuss potential future agents on the horizon.

Volatile organic compounds (VOCs) are molecules present in our everyday life, and they can be positive, such as in the formation of odour and food flavour, or harmful for environment and humans, and the research is focusing on limiting their emissions. Various methods have been used to achieve this purpose. Firstly, we review three main degradation methods: activated carbon, photocatalysis and a synergetic system. We provide a general overview of the operative conditions and report the possibility of VOC abatement during cooking. Within the literature, none of these systems has ever been tested in presence of complex matrices, such as during a cooking process. The aim of this study is to compare the three methods in order to understand the behaviour of filter systems in the case of realistically complex gas mixtures. Proton Transfer Reaction - mass spectrometry (PTR-MS) has been used as real-time monitoring of volatilome. Since VOC emissions are highly dependent on the composition of the food cooked, we evaluated the degradation capacity of the three systems for different burger types (meat, greens and fish). We demonstrate pros and cons of the photocatalysis and adsorption and how a combined approach can mitigate the drawbacks of photocatalysis.

Many Western studies have indicated that older women are generally more vulnerable in terms of mobility compared to older men, particularly regarding driving. However, the situation may differ in the context of China. This study, based on activity diaries and semi-structured inter-views, focuses on the spatiotemporal behavior of older adults in Tianjin and explores how the constraints posed by activity companions (in terms of type, size, and composition) shape the mo-bilities of older men and women, including activity locations, travel distances, and transporta-tion modes. The key findings are as follows: First, older women are more engaged with their families due to a higher percentage and longer duration of activities spent with family members. Second, older men tend to have more concentrated travel distances near their homes compared to older women. Third, older women exhibit a broader range of activities in different locations and engage in longer-distance leisure travel with family members when compared to older men. In the context of Western literature, this study discusses older women's enhanced social interactions, their earlier retirement in China, and the impact of COVID-19 as factors that help explain these findings. This study contributes to a deeper understanding of accompanied mobilities among Chinese older adults using geographical theory and methods, emphasizing the importance of flexible work schedules for the workforce and the organization of community-based activities to promote the social interactions and mobilities of older adults.

The paper presents a thorough examination of the burgeoning field of utilizing manufacturing waste for sustainable energy generation, aligning with the global imperative for resource efficiency and clean energy solutions. With the manufacturing sector being a significant contributor to waste generation, this study explores innovative approaches to transform waste materials into valuable resources, thereby mitigating environmental impacts and contributing to a circular economy. This work critically reviews current trends, emphasizing technological advancements, policy interventions, and market dynamics shaping the manufacturing waste utilization landscape. Noteworthy developments, such as advanced sorting technologies and the integration of digital solutions, are discussed in detail, showcasing their role in enhancing the efficiency of waste management processes. The study outlines future trends in the field, anticipating a shift towards closed-loop systems guided by circular economy principles. This comprehensive review aims to contribute to the discourse on sustainable waste management and energy generation by providing a holistic perspective on the field's current state and offering insights into the future trajectories that will propel manufacturing waste toward a more sustainable and circular future. The synthesis of technological innovation, collaborative efforts, and evolving regulatory frameworks presents a compelling case for the continued exploration of manufacturing waste as a valuable resource in the pursuit of a more sustainable and energy-efficient world.

Vanadium(IV) chalcogenide materials are of increasing interest for use in catalysis and energy conversion-related applications. Since no ternary compounds are yet known in the V–Se–Te system, we studied ternary VwSeyTe2–y (w = 1.10, 1.13; y = 0.42, 0.72) phases crystallizing in space group P3m1 (no. 164). Two single-crystal specimens with differing compositions of a solid solution were obtained using the ceramic method. All products were characterized by either single-crystal or powder X-ray diffraction. The lattice parameters increase with rising tellurium content in accordance to the larger ionic radius of the tellurium anion compared to selenium. The chemical compositions were confirmed by energy dispersive X-ray spectroscopy. Further, magnetic measurements revealed mostly antiferromagnetic properties. Simultaneous differential scanning calorimetry/thermogravimetric analyses in nitrogen atmosphere showed endothermic decomposition accompanied by the formation of VN. The results of this work can serve as a basis for the synthesis of new phases in the V–Se–Te and related vanadium chalcogenide systems.

Background: Retinal diseases such as neovascular age related macular degeneration (nAMD), diabetic macular edema (DME) or branch-/central retinal vein occlusion (B/CRVO) have significant implications for patients' social and psychological well-being. To gain a comprehensive understanding of patients' backgrounds and attitudes, we developed an exploratory questionnaire, the Basic Care and Patient Satisfaction Questionnaire (BPZ-9). Methods: The ALBATROS study aimed to assess the care situation of treatment-naïve patients diagnosed with either nAMD, DME or B/CRVO. The data collection took place at the beginning of treatment and after twelve months of anti-VEGF (vascular endothelial growth factor) therapy. The BPZ-9 instrument comprises nine questions to evaluate patients’ psychological and social situation and their satisfaction with treatment. Results: Data were collected from 1.478 nAMD (mean 78 years), 445 DME (67 years), 233 BRVO (70 years) and 144 CRVO (71 years) patients at 102 study centers throughout Germany. Approximately one third of the patients was living alone and six percent were in organized care. One in four patients had difficulties to walk and one in five needed accompany for treatment. Anxiety to lose vision was present in three out of four patients at the beginning and slightly decreased to two out of three over the 12-month treatment preriod. The distress of having a retinal disease was generally higher than the distress related to treatment. Most patients reported high treatment satisfaction (73%) and felt well informed (81%). Conclusion: Patients receiving anti-VEGF therapy commonly experience impaired mobility, dependency on others, distress and the fear of vision loss.

Several chronic diseases derive from metabolic, genetic, or inflammatory causes and often these causes are interconnected. Pharmacological treatments, although effective, often lead to unpleasant side effects. In this context, preventive approaches are of growing interest. The literature data of recent years support that the dietary intake of bioactive compounds can positively influence the biological functions of an organism. Among the bioactive compounds in the diet, polyphenols are widely recognized for their beneficial effects on health, as useful compounds for preventing/combating a series of pathologies related to lifestyle, metabolism, and aging. The artichoke (Cynara scolymus L.), a member of the Asteraceae family, is widely used in the food and herbal medicine fields for its beneficial properties. Artichokes are rich in polyphenols (including cynarin), flavonoids and their derivatives, and, for this reason, they have aroused interest in their pharmacological properties. The best-known activity of polyphenols is antioxidant activity. Through it, they help to neutralize free radicals, preventing cellular damage and the subsequent risk of conditions such as cancer, diabetes, and heart disease. Related to the antioxidant action we find the anti-inflammatory activity. This is an important benefit since chronic inflammation is a cause or contributory cause of many chronic diseases. Although many scientific results are of great interest and potential, there are still gaps to be filled. In this review, we report and discuss new insights providing documented evidence regarding the benefits of the artichoke compounds and their possible use to support the pharmacological treatment of pathologies associated with inflammation.

Seasonal snowpacks, characterized by their snow water equivalent (SWE), play a major role in the hydrological cycle, snow melt contributions to floods and the subsequent availability of water resources downstream. Accurately estimating SWE and understanding its spatial and temporal variations presents a considerable challenge, particularly within mountainous regions characterized by complex terrain and limited observational data. Seeking to enhance the performance of the widely used Soil and Water Assessment Tool (SWAT), we report a new approach characterising snowpack behaviour incorporating both modelled and remotely sensed derived SWE calibration data. We focus on the Chenab River Basin (CRB) a headwater catchment of the Indus Basin, globally significant in terms of human inhabitants and intensifying flood risk due to climate change. We conducted a thorough assessment of five satellite-derived and reanalysis-based precipitation datasets: ERA5-Land, CMORPH, TRMM, APHRODITE, and CPC UPP. This reveals significant levels of uncertainty in global precipitation products when compared to reference data from observed stations as well as in the resulting simulated streamflow from the SWAT model. Subsequently, we expanded the scope of the SWAT model to encompass the spatial and temporal simulation of SWE. This was achieved by incorporating information from remotely sensed and modelled SWE products, manually adjusting snow parameters in R-SWAT for both the main basin and at sub-basin scales. Integrating SWE from reference snow products into the calibration process, alongside streamflow data, substantially enhanced modelling accuracy to simulate SWE compared to the conventional auto-calibration and single-variable approaches reliant solely on streamflow data. This approach results in considerable improvement in SWE predictions and to some extent in streamflow simulation in catchments dominated by snow. This research highlights the potential of remote sensing and modelled SWE parameterisation in the absence of in-situ snowpack data in high-altitude environments. An improved understanding of SWE behaviour is vital for predicting hydrological responses spanning hazards to water resources in the populous downstream regions of the Indus Basin, especially in the face of climate change.

The feasibility of recovering bioactive antioxidants from Phyllantus emblica leaves using ethanol -water mixture (0 – 100%) and heat-assisted extraction technology (HAE-T) was investigated in this present study. To this effect, the process parameter of operating temperature (OT: 30 -50 oC), solid -to-liquid ratio (S:L: 1:20 - 1:60 g/mL) and extraction time (ET: 45 - 180 min) were investigated on the extract total phenolic content (TPC, mg GAE/g d.w), yield (EY, %) and antioxidant activity (μM AAE/g d.w) by employing the Box-Behnken experimental design (BBD) available in response surface methodology (RSM). Multi-objective process optimization using the desirability function algorithm to determine set of process variables that simultaneously optimize process responses of TPC, EY and AA was also investigated. The recovery process was thereafter modeled with BBD-RSM and multi gene genetic programming (MGGP) algorithm and model reliability assessment via Monte Carlo simulation were conducted for the best performing set of models for predicting TPC, EY and AA values. The HPLC characterization of the recovered extract was carried out to ascertain the phenolic compound constituents of the Phyllantus emblica leaf extract. The 50% ethanol solution was found to be the best for the optimal extraction of antioxidants from Phyllantus emblica leaves. The HAE-T was suitable for recovering bioactive extract from Phyllantus emblica leaves and investigated process parameters have impacts on the recovery process. The process parameters that simultaneously gave the optimum EY of 21.6565%, TPC of 67.116 mg GAE/g and AA of 3.68583 µM AAE/g were OT of 41.61 oC, S:L of 1:60 g/mL and ET of 180 min. The HPLC extract profiling revealed that the bioactive constituents present in the recovered extract were betulinic acid, gallic acid, chlorogenic acid, caffeic acid, ellagic acid, and ferulic acid. Both the developed BBD-RSM and evolved MGGP-based models predicted the observed process response of TPC, EY and AA satisfactorily with BBD-RSM models marginally better in their predictions. The reliability results showed that the BBD-RSM models predicted TPC, EY and AA values with high certainty of 99.985%, 97.569% and 98.661%, respectively.

Background. Recent studies revealed that differentiation of valvular interstitial cell into myofibroblasts played an important role in pathological valve remodeling in rheumatic valvular disease. Objective. To investigate effects of atorvastatin, olmesartan, and resveratrol on Transforming Growth Factor β1-induced fibrosis. Methods. Valvular interstitial cell was isolated from 12-weeks male New Zealand rabbit (Oryctolagus cuniculus). Culture cells was divided into 4 groups, control group, group I (0.5 mg/mL Atorvastatin), group II (100 nmol/L Olmesartan), group III (50 μM/L Resveratrol) and group IV (combinations). All group were exposed to 100 nM Transforming Growth Factor β1 for 24 hours. Results. Immunochemical staining demonstrated that cells were completely differentiated into myofibroblasts with mean expression of α-smooth muscle actin 24522.64±4566.994. Atorvastatin, olmesartan, resveratrol, and its combination significantly reduced α-smooth muscle actin expression (6823±1735.3, 6942.7±2455.9, 14176.2±3343.3, 5051.8±1612.2 respectively (p&lt;0.001). Conclusion. Our data showed atorvastatin, olmesartan, resveratrol, and its combination significantly reduce Transforming Growth Factor β1-induced valvular fibrosis.

Defects in low-density lipoprotein receptor (LDLR) are associated with familial hypercholesterolemia (FH), manifested by atherosclerosis and cardiovascular disease. Defective LDLR in hepatocytes leads to increased blood cholesterol level that damage vascular cells, especially endothelial cells, through oxidative stress and inflammation. However, the distinctions between endothelial cells from individuals with normal and defective LDLR are not yet fully comprehended. In this study, we obtained and examined endothelial derivatives of induced pluripotent stem cells (iPSC) generated previously from conditionally healthy donors and compound heterozygous FH patients carrying pathogenic LDLR alleles. In normal iPSC-derived endothelial cells (iPSC-EC), we detected the LDLR protein predominantly in its mature form, while iPSC-EC from patients with FH display reduced level of mature LDLR and show abolished low-density lipoprotein uptake. RNA-seq of iPSC-EC with mutant LDLR revealed a unique transcriptome profile comprising downregulated genes related to monocarboxylic acid transport, exocytosis and cell adhesion, as well as upregulated signaling pathways of cell secretion and leukocyte activation. Overall, these findings suggest that LDLR defects increases susceptibility of endothelial cells to inflammation and oxidative stress. This, combined with elevated extrinsic cholesterol levels, may result in accelerated endothelial dysfunction, contributing to early progression of atherosclerosis and other cardiovascular pathologies related to FH.

Dietary protein quality plays a key role in maintaining intestinal mucosal integrity, but also modulates the growth of luminal microorganisms. This work assessed the effect of dietary protein sources on the performance, gut morphology, and microbiome in Nile tilapia. Four isonitrogenous and isolipidic diets comprising equivalent amounts of the protein supply derived from either PLANT, ANIMAL, INSECT, or MICROBIAL (bacterial biomass) sources were fed to triplicate groups of fish (IBW: 12 g) during 46 days. Fish fed ANIMAL and MICROBIAL diets showed significantly higher growth than those fed the PLANT and INSECT diets (P < 0.05). Relative abundance at the phylum level shows Bacteroidetes, Fusobacteria and Proteobacteria as more abundant phyla in tilapia’s intestine, while Cetobacterium is the most representative genera in all treatments. Interesting patterns were observed in the correlation between amino acid intake and genus and species abundance. Metabolism prediction analysis showed that microbial amine and polyamine degradation pathways are modulated depending on diets. In conclusion, different protein sources interfere directly with the cross-talk of bacteria pathways and amino acid intake.

The rapid growth in the number of interconnected devices on the Internet (referred to as the Internet of Things – IoT), along with the huge volume of data that are exchanged and processed, has created a new landscape in network design and operation. Due to the limited battery size and computational capabilities of IoT nodes, data processing usually takes place on external devices. Since latency minimization is a key concept in modern era networks, edge servers that are in close proximity to IoT nodes gather and process related data, while in some cases data offloading in the cloud might have to take place. The interconnection of a vast number of heterogeneous IoT devices with the edge servers and the cloud, where IoT, edge and cloud converge to form a computing continuum, is also known as IoT-edge-cloud (IEC) continuum. Several key challenges are associated with this new computing systems architectural approach, including: i) design of connection and programming protocols aimed at properly manipulating a huge number of heterogeneous devices over diverse infrastructures; ii) design of efficient task offloading algorithms aimed at optimizing services execution; iii) support for security and privacy enhancements during data transfer to deal with the existent and even unforeseen attacks and threats landscape; iv) scalability, flexibility and reliability guarantees to face the expected mobility for IoT systems, and; v) design of optimal resource allocation mechanisms to make the most out of the available resources. These challenges become even more significant towards the new era of sixth generation (6G) networks, which will be based on the integration of various cutting edge heterogeneous technologies. Therefore, the goal of this survey paper is to present all recent developments in the field of IEC continuum systems, with respect to the aforementioned deployment challenges. In the same context, potential limitations and future challenges are highlighted as well. Finally, indicative use cases are also presented, from an IEC continuum perspective.

Plants have been used in alternative medicine for centuries in the treatment of many diseases with the metabolites they contain. The goal of this work was to investigate the phenolic profile, antioxidant capacity and biological activity of I. helenium subsp. pseudohelenium extracts. Phe-nolic (HPLC) substances in leaf ethanol (L-EtOH), leaf pure water (L-PW), root ethanol (R-EtOH), and root pure water (R-PW) extracts of Inula helenium subsp. pseudohelenium plant were investi-gated. Also, in vitro the antimicrobial (hollow agar), antioxidant (DPPH, ABTS.+, FRAP, CU-PRAC), antiproliferative (MTT assay against HT-29, MCF-7 and L-929), and DNA (Agarose gel electrophoresis) protective activities of the samples were examined. Although gallic acid was not detected in the extracts, the presence of curcumin was detected only in EtOH extracts. L-EtOH exhibited the best antimicrobial activity. According to the antioxidant results, it was found that the L-EtOH extract had an activity profile close to the standard antioxidants in general. It was also found that the L-EtOH extract stabilized the DNA by disrupting the scavenging effect of H2O2+DMSO. According to the antiproliferative activity results, EtOH extracts exhibited the strongest effect, especially against MCF7. When evaluated in general terms, it was found that L-EtOH extract showed better activity than other extracts. It is important to conduct more in vivo and in vitro studies after isolating the active components of extracts e.g. L-EtOH, which have good effects in terms of biological activity.

As drone technology is rapidly becoming accessible to school children in terms of both low cost and ease-of-use, primary and secondary school teachers are beginning to consider where modern drones can play an important role in schooling. To date, there is very little empirical education research printed in the education research literature guiding innovative curriculum developers in the incipient domain of drone education. As a result, teachers interested in including emerging technologies in their classrooms are often at a loss of where to begin. Through clinical interviews with schoolteachers in the United States, our study identified five readily accessible “departure points” to include drones in contemporary STEM &amp; vocational technology (CTE) school classrooms that help teachers address common curricular goals. Taken together, these interviews reveal that teachers using drones follow one of several distinct pathways as a first step toward achieving a widespread goal of teaching students to use modern technologies to construct, pursue, and communicate findings of fruitful research inquiries—the prevalence of which is not reflected in a comprehensive literature review. The five pathways for starting a successful drone education emerging from the interview data as dominant were: timed-racing trials; precision-flight obstacle courses; computer coding; videography; and domain-specific knowledge of drone operations laws and ethics.

This mini-review examines the complex relationship between the gut microbiota and human health, with a special focus on its role in conditions such as inflammatory bowel disease (IBD) and cardiovascular disease (CVD). It explores how dietary patterns can affect the composition of the gut microbiota, thus contributing to the development of various diseases. The gut microbiota is crucial in the production of metabolites such as trimethylamine N-oxide (TMAO), which play a significant role in the development of both IBD and CVD. High levels of TMAO and other metabolites, such as phenylacetylglutamine, have been linked to an increased risk of CVD. The review highlights the potential of dietary interventions and therapies designed to modulate the gut microbiota in reducing these risks. Following a Mediterranean diet may offer cardiovascular protection, emphasizing the need for further research into the molecular mechanisms of diet-related changes in the microbiota.

Renewable jet fuel (RJF) production has been recognized as a promising approach for reducing the aviation sector's carbon footprint. Over the last decade, commercial production of RJF has piqued the interest of airlines and governments around the world. However, RJF production can be challenging due to its dispersed supply resources. Furthermore, the production of RJF is more costly compared to producing conventional jet fuel. In this study, using a mixed integer linear program (MILP), we design an RJF supply chain network in which we obtain an optimized configuration of the supply chain and determine operational decisions required to meet RJF demand at airports. To accelerate commercialization of RJF production, we considered four different monetary incentive programs, which could cover the supply chain’s costs. This study is validated by employing the model to design an RJF supply chain in the Midwestern US. Results from this study are promising as they show the supply chain can achieve commercialization with partial financial coverage from the incentive programs. Based on the findings of this study, policymakers can devise policies to commercialize RJF production and accelerate its adoption by industry.

We propose a notion of a ternary skew-symmetric covariant tensor of 3rd order, consider it as a 3-dimensional matrix and study a ten-dimensional complex space of these tensors. We split this space into a direct sum of two five-dimensional subspaces and in each subspace there is an irreducible representation of the rotation group SO(3)↪SO(5). We find two independent SO(3)-invariants of ternary skew-symmetric tensors, where one of them is the Hermitian metric and the other is the quadratic form. We find the stabilizer of this quadratic form and its invariant properties. Making use of these invariant properties we define a SO(3)-irreducible geometric structure on a five-dimensional complex Hermitian manifold. We study a connection on a five-dimensional complex Hermitian manifold with a SO(3)-irreducible geometric structure, find its curvature and torsion. The structures proposed in this paper and their study are motivated by a ternary generalization of the Pauli’s principle proposed by R. Kerner.

Carbohydrates such as fructooligosaccharides (FOS) are associated with improved gastrointestinal health and prevention of excess body fat. We evaluated the long-term effects of high amounts of FOS on metabolic parameters, non-alcoholic fatty liver disease (NAFLD) and short-chain fatty acids (SCFA). Sixty C57BL/6 mice received diets for four months: control (C), normolipid rich in fiber (F), normolipid supplemented with FOS (FOS), high fat (HL), high fat with high fiber (HLF) and high fat with FOS (HLFOS). We analyzed: animal weight; body composition; food intake; fasting blood glucose; serum and liver lipid profile; liver and intestinal histologies; malondialdehyde (MDA), hepatic retinol and α-tocopherol; SCFA in the feces. Supplementation with FOS in a high-fat diet promoted less body weight gain and reduced liver and retroperitoneal adipose tissue weights compared to HL and HF. FOS prevented NASH and decreased alanine aminotransferase and serum cholesterol levels in experimental animal models of obesity and metabolic syndrome (MS). There was found statistical differences in the dosages of the three main SCFAs in feces (acetic, isobutyric and isovaleric acids). Long-term supplementation with high doses of FOS was effective in reducing weight, adiposity, NAFLD and serum cholesterol in C57BL mice with obesity and MS induced by a high-fat diet.

This paper studies a multihop amplify-and-forward (AF) simultaneous wireless information and power transfer (SWIPT) relaying system. Each relaying node harvests energy using power splitting (PS) scheme from a part of its received signal to amplify and forward the rest the received signal to the next relay. Based on this system model and signal flow, we derived and solved the convex energy minimization problem with optimal PS ratio. The influence of processing cost was then investigated for the AF-SWIPT system with the decode-and-forward SWIPT as benchmark, where AF-SWIPT was found to be superior.

Trehalose is a non-reducing disaccharide and participates in physiological activities such as or-gan formation, energy metabolism, and stress resistance of insects. In the present study, phylo-genetic analysis divided 21 Bmtret1 orthologs into three clades. These genes are equally distrib-uted on the nine chromosomes. Cis-elements in the promoter regions of Bmtret1s indicated the possible function of Bmtret1s in response to hormones and environmental stimulus. The qPCR analysis showed the significantly different expression levels of Bmtret1s in different tissues and organs, indicating possible functional divergence. In addition, most Bmtret1s showed disturbed expression levels in response to BmNPV stresses. Our results provide a foundation for further functional dissection of Tret1s in Bombyx mori and implicate them as potential regulators for an-tiviral responses.

Background: Assessing body image and personalized rehabilitation in lower limb amputation is essential to measure impact on an individual’s quality of life and psychosocial wellbeing. The aim of this study was to develop a Spanish version of the Amputee Body Image Scale (ABIS-E) for Spanish-speaking lower limb amputee. Methods: A cross-sectional study was conducted including amputee patients in local in Madrid, Spain. Clinical outcomes about body image (Amputee Body Image Scale, ABIS), health-related quality of life (EuroQol-5D-5L), depression and anxiety (Hospital Anxiety and Depression Scale, HADS), pain (Brief Pain Inventory-Short Form, BPI-SF) and functional capacity (Prosthesis Evaluation Questionnaire, PEQ) were collected. Results: Seventy-three participants were assessed. Excellent test-retest reliability (ICC=0.847) and good internal consistency (Cronbach's alpha=0.753) were obtained. Three factors were extracted in the factor analyses. Convergent validity with Pearson's and Spearman's correlation coefficients were calculated for the depression and anxiety questionnaires (HADS) (values between .57 and .67), functional capacity (PEQ) (values between -.35 and .71) and quality of life (EQ-5D-5L) (values between -.37 and .61). Conclusions: The ABIS-E is a reliable and valid tool for measuring body image in the Spanish population with a lower limb amputation, potentially useful in primary care to identify psychosocial problems.

Background: Polycystic ovary syndrome (PCOS) is a common reproductive and endocrinological disease characterized by ovulatory dysfunction, polycystic ovaries, and hyperandrogenism. Adipokines are believed to contribute to developing PCOS and its accompanying metabolic complications such as dyslipidemia, insulin resistance, and cardiovascular diseases. Oncostatin M (OSM), a novel adipokine, plays a role in oogenesis, lipogenesis, and inflammation and may contribute to PCOS pathogenesis and its related metabolic problems. Methods: In this case-control study, the patients were grouped in a 1:1 ratio into either the PCOS (n = 32) or the control group (n = 32). Blood samples were obtained between the 3rd and 5th days of the menstrual cycle. Serum levels of fasting glucose, insulin, C-reactive protein (CRP), low-density lipoprotein, high-density lipoprotein, triglyceride, white blood cell count, thyroid-stimulating hormone, luteinizing hormone, follicle-stimulating hormone, total testosterone, prolactin estradiol, and OSM were analyzed. Results: OSM levels were significantly lower, but CRP levels were substantially higher in the PCOS group than in the control group (p = .002, p = .001, respectively). OSM was inversely correlated with total cholesterol, non-high-density lipoprotein cholesterol, fasting glucose, and the luteinizing hormone/follicle-stimulating hormone ratio (ρ = .329, p = .017; ρ = .386, p = .005; ρ = .440, p = .001; ρ = .316, p = .023, respectively). Conversely, there was no correlation between OSM and total testosterone level (ρ = .220; p = .118). In the context of inflammation and metabolic parameters, OSM was inversely correlated with CRP, Homeostatic Model Assessment for Insulin Resistance score (HOMA-IR), and low-density lipoprotein cholesterol (LDL) (ρ = .353, p = .019; ρ = .275, p = .048; ρ = .470, p &lt; .001, respectively). The performance of Oncostatin M for diagnosing PCOS showed 50% sensitivity, 75% specificity, and 63% accuracy (p = .009) in ROC curve analysis. Conclusions: Plasma OSM levels were considerably lower in patients with PCOS than in the control group, and this was inversely correlated with the hormonal and metabolic parameters of PCOS. Thus, OSM may be a novel therapeutic target for PCOS and metabolic complications.

Droughts are a common occurrence in various climates and are primarily caused by a prolonged decrease in rainfall. Several factors contribute to droughts, including temperature, wind speed, relative humidity, rainfall timing, amount, and intensity during the growing season. The objective of this study is to establish a new index, named soil moisture and evapotranspiration revealed drought index (SERDI), for displaying dry and wet conditions based on combining both soil moisture and evapotranspiration (Penman-Monteith) to improve drought early warning and its severity globally. For validation of the SERDI with other indices such as LST, VHI, NDVI, and NDWI, different ways used such as R-square, RMSE, MAPE, and P-value to estimate the accuracy, variability of data, the forecast conditions, and how the significance of data. The results showed that the low RMSE and high r² were found between SERDI with LST and VHI. In contrast, the low R- square and high RMSE were between SERDI with NDVI and NDWI in most of the semi-arid areas. Furthermore, most of the semi-arid areas from Iran, Iraq, Syria, Jordan, and Israel experienced moderate and severe dry conditions, except some parts of these regions had normal conditions in Iran and Syria. The SERDI analysis revealed a strong correlation between (LST) and a moderate correlation with (VHI) across all study areas. However, the relationship between other indices, like (NDWI) and (NDVI), varied depending on the regions. To conclude, SERDI can be used globally for detecting drought based on soil moisture and evapotranspiration.

A single-crystal of ytterbium-doped “mixed” yttrium-lutetium aluminium garnet with a stoichiometric composition of (Y0.601Lu0.233Yb0.166)3Al5O12 was grown by the Czochralski method and its structure, vibronic, spectroscopic and laser properties were studied. The stimulated-emission cross-section for Yb3+ ions was maximized to 2.53×10-20 cm2 at 1031 nm, the emission bandwidth is ~8 nm and the reabsorption-free luminescence lifetime of the 2F5/2 state is 1.063 ms. Pumped at 941 nm, the Yb-laser generated a maximum output power of 1.04 W at 1.03 and 1.05 μm with a high slope efficiency of 76.4% and a laser threshold of 76 mW. A continuous wavelength tuning over a range of 51.6 nm (1026.4 - 1078.0 nm) was also achieved. Power scaling is achieved using a 969 nm-diode pumped microchip cavity. A maximum output power of ~9 W is obtained at 1.05 μm with a slope efficiency of 76% and with an almost circular laser beam profile.

Aluminum (Al) toxicity is the most common factor limiting the growth of alfalfa in acidic soil conditions. Melatonin (MT), a significant pleiotropic molecule present in both plants and animals, has shown promise in mitigating Al toxicity in various plant species. This study aims to elucidate the underlying mechanism by which melatonin alleviates Al toxicity in alfalfa through a combined physiological and transcriptomic analysis. The results reveal that 5 μM MT significantly alleviates Al-induced growth inhibition and preserves the morphology of root tip cells. Moreover, MT application reduces Al accumulation in alfalfa roots and shoots by 28.6% and 27.6%, respectively. Additionally, MT plays a crucial role in scavenging Al-induced excess H2O2 by enhancing the activities of superoxide dismutase (SOD), peroxidase (POD), and catalase (CAT), consequently reducing malondialdehyde (MDA) levels. The RNA-seq results reveal that MT application significantly upregulates the expression of xyloglucan endotransglucosylase/hydrolase (XTH) and carbon metabolism-related genes, including those involved in the glycolysis process, as well as sucrose and starch metabolism, suggesting that MT application may mitigate Al toxicity by facilitating the binding of Al to the cell walls, thereby reducing intracellular Al accumulation, and by improving respiration and the content of sucrose and trehalose. Taken together, our study demonstrates that MT alleviates Al toxicity in alfalfa by restoring redox homeostasis, enhancing Al binding to the cell wall, and modulating carbon metabolism. This research advances our understanding of the mechanisms underlying MT's effectiveness in mitigating Al toxicity, offering potential strategies for reducing Al accumulation in alfalfa.

Glycosaminoglycans (GAGs) with unique structures from marine animals show intriguing pharmacological activities and negligible biological risks, providing more options for us to explore safer agents. Swim bladder is a tonic food and folk medicine, and its GAGs show good anticoag-ulant activity. In this study, two GAGs SJG-1.0 and GMG-1.0 have been extracted and isolated from the swim bladder of Sphyraena jello and Gadus morhua. The physicochemical properties, pre-cise structural characteristics, and anticoagulant activities of these GAGs were determined. The analysis results of the SJG-1.0 and GMG-1.0 showed that they were chondroitin sulfate (CS)/dermatan sulfate (DS) hybrid chains with molecular weights of 109.32 kDa and 123.13 kDa, respectively. They were mainly composed of the repeating disaccharide unit of -{IdoA-α1,3-GalNAc4S-β1,4-}- (DS-A). The DS-B disaccharide unit of -{IdoA2S-α1,3-GalNAc4S-β1,4-}- also existed in both SJG-1.0 and GMG-1.0. SJG-1.0 had a higher proportion of CS-O disaccharide unit -{-GlcA-β1,3-GalNAc-β1,4-}-, while GMG-1.0 contained higher proportion of CS-E disaccha-ride unit -{-GlcA-β1,3-GalNAc4S6S-β1,4-}-. The disaccharide compositions of the GAGs varied in a species-specific manner. Anticoagulant activity assay revealed that both SJG-1.0 and GMG-1.0 had potent anticoagulant activity, which can significantly prolong activated partial thrombosis time. GMG-1.0 also can prolong the thrombin time. SJG-1.0 showed no intrinsic tenase inhibition ac-tivity, while GMG-1.0 can obviously inhibit intrinsic tenase with EC50 of 58 nM. Their significantly different anticoagulant activities may be due to their different disaccharide structural units and proportions. These findings suggested that the swim bladder CS/DS hybrid chains with well-defined structure may be safer anticoagulants with low bleeding risk.

Catalase, an antioxidant enzyme widely produced in mammalian cells and bacteria, is crucial in mitigating oxidative stress in a hostile environment. This function enhances the intracellular survivability of various intracellular growth pathogens, including Brucella abortus. In this study, to determine whether the inhibition of catalase can inhibit the intracellular growth of Brucella (B.) abortus, we employed 3-amino-1,2,4-triazole (3-AT), a catalase inhibitor, in both RAW 264.7 macrophage cells and an ICR mouse model during Brucella infection. The intracellular growth assay indicated that 3-AT exerts growth-inhibitory effects on B. abortus within macrophages. Aside from that, it contributes to the accumulation of reactive oxygen species and the formation of nitric oxide. Notably, 3-AT diminishes the activation of the nucleus transcription factor (NF-κB) and modulates cytokine secretion within infected cells. In our mouse model, the administration of 3-AT reduced B. abortus proliferation within the spleen and liver of infected mice. This reduction was accompanied by a diminished immune response to infection, as indicated by lowered levels of TNF-α, IL-6, IL-10, and altered CD4+/CD8+ T-cell ratio. These results suggest the protective and immunomodulatory effects of 3-AT treatment against Brucella infection.