The growing demand for nutritious foods has spurred investigations into alternative sources of nutrition beyond traditional options. For this reason, the present study approaches the amaranth, which is a plant with high potential, highlighting the morphological growth, grain biomass pro-duction, and quantitative traits of seven varieties of amaranth cultivated in the pedoclimatic con-ditions of Somes meadow in Transylvania. A bifactorial trial was implemented with factors ama-ranth species and amaranth varieties. Two amaranth species and seven varieties were studied. Differences are reported between morpho-productive and quantitative traits of the seven amaranth varieties studied in this research. The interrelationships between amaranth morphological traits quantified by using Pearson simple correlations show that morphological traits moderately con-tribute to grain fresh biomass yield, while morphological traits and fresh biomass strongly con-tributed to grains dry biomass yield. Our study shows that morpho-productive, and nutritional characteristics of the seven amaranth varieties comprised by our study recommend the plans to be used in various nutritional aims, being a valuable replacer of traditional raw materials in specific food and feed industry sectors.

The aim of this study was to investigate the relationship between postprandial glycemic levels based on flash-monitoring and the production of intestinal hydrogen (H2) and methane (CH4) gases based on measurement of the amount of these gases in exhaled air. We studied 14 subjects with type 2 diabetes mellitus (T2DM) and 10 individuals without diabetes (control) with 3 food-load tests with simultaneous determination of gases in exhaled air and assessment of glucose levels. In 15.4% of patients with T2DM, there was a non-significant increase in exhaled H2. How-ever, all subjects in the control group had significant increase in exhaled H2. Moreover, the level of H2 in exhaled breathafter food load in patients with T2DM was lower than in normoglycemic subjects. Also, in normoglycemic subjects there was an inverse correlation between maximum glucose rise and maximum H2 in exhaled air after food load. At the same time in patients with T2DM the level of CH4 in exhaled air directly correlated with the parameters of postprandial glycemia in the test with lactulose. Confirmation of a causal relationship between decreased H2 production, increased intestinal CH4 production, and more severe postprandial glycemia may identify new therapeutic targets in the correction of postprandial glycemia in patients with T2DM.

This paper investigates the periodic and quasi-periodic orbits in the symmetric collinear four-body problem through a variational approach. In Section 3, we analyze the conditions under which homographic solutions minimize the action functional. We demonstrate that these solutions for four equal masses arranged in a linear configuration are indeed the minimizers of the action functional and compute the minimum value of the action functional for these solutions. Additionally, we employ numerical experiments using Poincaré sections to explore the existence and stability of periodic and quasi-periodic solutions within this dynamical system. Our results provide a deeper understanding of the variational principles in celestial mechanics and reveal complex dynamical behaviors that are crucial for further studies in multi-body problems. The findings have significant implications for theoretical research and practical applications in astrodynamics and space mission planning.

Cystatin F (CstF) is a protease inhibitor of cysteine cathepsins, including those involved in acti-vating the perforin/granzyme cytotoxic pathways. It is targeted to the endolysosomal pathway but can also be secreted to the extracellular milieu or endocytosed by bystander cells. CtsF was shown to be significantly increased in tuberculous pleurisy, and during HIV coinfection, pleural fluids display high viral loads. In human macrophages, we revealed a strong upregulation of CstF during infection with Mycobacterium tuberculosis (Mtb). CstF manipulation using RNA si-lencing led to increased proteolytic activity of lysosomal cathepsins, improving Mtb intracellular killing. Here, we investigate the impact of CstF depletion during coinfection of Mtb-infected mac-rophages with lymphocytes infected with HIV. Our results indicate that decreasing CstF released by phagocytes impacts the major pro-granzyme convertase cathepsin C of cytotoxic immune cells. Consequently, an observed increase of the granzyme B apoptotic effects leads to a significant re-duction in viral replication in HIV-infected lymphocytes. Overall, our results indicate a mecha-nism of Mtb/HIV evasion of the cytotoxic mediated pathogen killing driven by the ax-is CstF/ catC/granzymes contributing to this syndemic interaction. Ultimately, this knowledge can be crucial for developing new therapeutic approaches to control both pathogens based on manipulating CstF.

Background/Objectives: Chemerin, which is a multifunctional cytokine and adipokine, has been implicated in inflammatory and metabolic processes and might play a role in upper gastrointes-tinal (GI) malignancies, particularly gastric and esophageal cancer. The aim of this review is to explore the role of chemerin in the pathophysiology of upper GI cancers, as well as its potential as a biomarker for early detection and as a therapeutic target. Methods: A comprehensive review of recent studies about chemerin's biochemical properties and interaction with its receptors, as well as its effects on inflammatory responses, immune regulation and metabolic processes was con-ducted. Clinical implications of chemerin on gastric and esophageal cancer were analyzed, whereas the potential therapeutic strategies targeting chemerin were discussed. Results: Elevated chemerin levels are associated with poor prognosis in gastric cancer and promote invasiveness and metastasis in esophageal cancer. Chemerin receptor antagonists show promising results in inhibiting cancer cell migration, invasion and progression. Conclusions: Chemerin could repre-sent a valuable prognostic biomarker and therapeutic target for upper GI cancers. Future observa-tional studies should validate its clinical applications and investigate the efficacy of chemerin in-hibitors as potential therapeutic targets.

Electrolyzed water, which mainly contains hypochlorous acid, is widely used because of its strong microbicidal effects, biosafety, and eco-friendliness. For frequent use in intraoral treatments, we focused on neutral electrolyzed water (NW) produced using two-stage electrolysis and investigated its storage stability. For standard-concentration NWs with free available chlorine concentration (ACC) of 25, 35, and 50 mg/L and high-concentration NWs (100, 200, 300, 500, and 1000 mg/L), changes in the pH, oxidation-reduction potential, and ACC during 126 days of storage and the bactericidal efficacies were examined. Storage under non-shaded conditions at room temperature (LRT) and a higher ACC substantially altered the properties of the NW. NW (≤ 300 mg/L) had a pH of 5.9–7.3 even after storage under LRT; however, NW with higher ACC (500 and 1000 mg/L) had a pH ˂ 5.5, critical for human enamel), even under shaded and refrigerated conditions (SLW). Only NW (25 mg/L) stored under LRT exhibited the lowest ACC (5 mg/L), indicating a decreased bactericidal effect. When stored for use in intraoral treatments, NWs should be prepared with an ACC of 25–300 mg/L and stored in SLW. If diluted NW is used, the ACC should be checked and appropriately diluted every time.

The scratch test consists in pushing a tool across the surface of a material at a given penetration depth or applied load. It has several applications in Science and Engineering including strength testing, damage and quality control of thin films and coatings. Despite numerous attempts in scientific literature, the application of scratch test to characterizations of fracture properties remains a heavily controversial topic. Therefore, this investigation arises as an experimental study in order to assess the fracture toughness using scratch test. A study on the effect of cryogenic treatment, performed after tempering, on fracture toughness, via scratch test experiments, of different tool steels has been made. A laboratory investigation on AISI D2, AISI M2 and X105CrCoMo18 steel confirms the possibility of increasing the fracture toughness by carrying out the cryogenic treatment after the usual heat treatment

We previously reported our initial experience of subxiphoid single-port robotic-assisted thoracic surgery (SRATS) thymectomy using the single-port robotic surgical system (SPS). However, the potential benefits of this technique remain unknown. Thus, this study examined the multi-institutional experience of SRATS thymectomy and compared perioperative outcomes of this technique with those of subxiphoid single-port video-assisted thoracic surgery (SVATS) thymectomy. Data of patients who underwent subxiphoid SRATS and SVATS thymectomy performed by three thoracic surgeons at three institutions between September 2018 and May 2024 were retrospectively collected. In total, 110 patients were included, with 85 and 25 undergoing SRATS and SVATS thymectomy, respectively. No significant differences were noted in the total operative time (154.46±74.06 vs. 146.76±67.07 min, P=0.674) and conversion rate to median sternotomy (0% vs. 4 %, P=0.227) between the two groups. The SRATS group was associated with a lower conversion rate to multi-port surgery (2% vs. 20%, P=0.006), shorter chest tube drainage duration (1.40±0.94 vs. 2.00±1.29 days, P=0.001), and shorter postoperative hospital stay (2.87±1.26 vs. 5.08±5.20 days, P=0.007). Subxiphoid SRATS thymectomy using the SPS is feasible and can be a good alternative to conventional minimally invasive thymectomy. Further large-scale randomized controlled studies are needed to confirm its benefits.

By employing a variation of the polyamidation method using in situ silylated diamines and acid chlorides, it has been possible to obtain a rod-type polyamide: poly(p-phenylene terephthalamide) (PPTA, a polymer used in the high value-added material Kevlar), with a molecular weight much higher than that obtained with the classical, and industrial, polyamidation method. The optimization of the method has consisted in using, together with the silylating agent, a mixture of pyridine and a high pKa tertiary amine. The research has been complemented by a combination of nuclear magnetic resonance and molecular simulation studies, which have determined that the improvements in molecular weight derive mainly from the formation of silylamide groups in the growing polymer.

This research investigates the energy consumption of buildings managed by traditional Building Management Systems (BMS) and proposes the integration of Internet of Things (IoT) technology to enhance energy efficiency. Conventional BMS often suffer from significant energy wastage and safety hazards due to sensor failures or malfunctions. These issues arise when building systems continue to operate under unknown conditions while the BMS is offline, leading to increased energy consumption and operational risks. The study demonstrates that integrating IoT systems with existing BMS can substantially improve energy efficiency in smart buildings. The research involved designing a system architecture prototype, performing MATLAB simulations, and real-life case study which revealed that IoT devices are effective in reducing energy waste, particularly in Heating, Ventilation, and Air Conditioning (HVAC) systems and lighting. Additionally, an auxiliary bypass system was incorporated in parallel with the IoT system to enhance reliability in the event of IoT system failures. Preliminary findings indicate that the integration of IoT systems with traditional BMS significantly boosts energy efficiency and safety in smart buildings. This integration offers a promising solution for advancing energy management practices and policies, thereby improving both operational performance and sustainability in building management.

Parents play an important role in shaping the eating habits of their children through: appropriate selection of food products, snacking between meals and appropriate exposure to information from television advertisements, the press or the Internet. The level of parents' knowledge about proper nutrition and substances added to food is therefore crucial in promoting appropriate dietary choices in children and adolescents in order to prevent diet-related diseases. Objectives: Assessment of the consumption of snack foods by children and adolescents according to the surveyed parents and analysis of parents' knowledge about additional substances in food. Methods: The study was conducted among 129 parents of students from selected primary schools. The research tool was an original survey questionnaire consisting of 24 questions. Survey interviews were conducted with parents during meetings at schools. Statistical analysis was performed using the Pearson ch2 test, the significance level was set to p<0.05. Results: Parents most often indicated sweets, confectionery products and sweetened drinks (25%) and vegetables or fruit (21%) as the form of snack for their children. 46% of children and adolescents drank sweetened drinks at least once a day. Parents had an average level of knowledge about food additives. Significant correlations were found between the level of knowledge of parents of school-age children about food additives and their level of education. Parents' knowledge and education did not significantly influence the level of snack consumption by their children. Children's eating behavior should be considered unsatisfactory. Conclusions: Research has shown the need for parents to be educated about food additives and to pay more attention to reading food labels so that they can reliably prepare their children to make the right food choices. Measures should be implemented to improve the eating habits of children and adolescents.

This work presents an innovative application of optimal control theory to the strategic scheduling of battery storage in the day-ahead electricity market, with a focus on enhancing profitability while factoring in battery degradation. The study incorporates in the optimisation framework the cost of battery capacity degradation, the effects of capacity degradation and internal resistance degradation into dynamics. We employ a continuous-time representation of the dynamics, in contrast with many other studies that use a discrete-time approximation with rather coarse intervals. We adopt an equivalent circuit model coupled with empirical degradation parameters to simulate a battery cell’s behaviour and degradation mechanisms with good support from experimental data. Utilising direct collocation methods with mesh refinement allows for precise numerical solutions to the complex, nonlinear dynamics involved. Through a detailed case study of Belgium’s day-ahead electricity market, we determine the optimal charging and discharging schedules under varying objectives: maximizing net revenues, profits considering capacity degradation, and profits considering both capacity degradation and internal resistance increase due to degradation. The results demonstrate the viability of our approach and underscore the significance of integrating degradation costs into the market strategy for battery operators, alongside its effects on the battery’s dynamic behaviour. Our methodology extends previous work by offering a more comprehensive model that empirically captures the intricacies of battery degradation, including a fine and adaptive time domain representation, focusing on the day-ahead market, and utilising accurate direct methods for optimal control. The paper concludes with insights into the potential of optimal control applications in energy markets and suggestions for future research avenues.

Soil contamination and the uptake of contaminants by food crops is a global problem that differs significantly from region to region, with the key factors affecting the contaminants present in local soils being the mineralogical composition of the underlying layers and local human activity. The area of ​​the Pannonian region is known for the fact that agriculture has, historically, played an important role since Roman times, which was particularly influenced by human activity. In this study we performed a preliminary study of the contamination of soil samples across the Pannonian region, to determine the potential presence of harmful contaminants. Both soil and crop samples were analysed for the potential presence of heavy metals, with additional focus placed on the potential presence of microplastics in the region`s soil.

Cancer remains one of the main causes of death in the world due to its increasing incidence and treatment difficulties. Although several progresses have been done in this field, innovative approaches are needed to reduce tumor incidence, progression and spreading. In particular, the development of cancer vaccines is currently ongoing like both preventive and therapeutic strategy. This concept is not new, but few vaccines have been approved in oncology. Antigen-based vaccination emerges as a promising strategy, leveraging specific tumor antigens to activate the immune system response. However, challenges persist in finding suitable delivery systems and antigen preparation methods. Exosomes (EXs) are highly heterogeneous bilayered vesicles which carry several molecule types in the extracellular space. The peculiarity is that they may be released from different cells and may be able to induce a direct or indirect stimulation of immune system. In particular, EX-based vaccines may cause anti-tumor immune attack or produce memory cells recognizing cancer antigens and inhibit disease appearance. This review delves into EXs composition, biogenesis, and immune-modulating properties exploring their role as tool for prevention and therapy in solid tumors. Finally, here we describe future research directions to optimize vaccine efficacy and realize the full potential of EX-based cancer immunotherapy.

The accumulation of brown algae from the genus Sargassum has been increasing over the years in coastal regions of the Caribbean, Africa, Brazil, and Mexico. This causes harmful effects to the ecosystem, health, economy, and climate due to gas emissions from its decomposition process. There is the possibility of this biomass being reused in civil construction, and few studies have been carried out on its application to common Portland cement mortar. As such, the objective of this study is to evaluate the potential of sargassum ash as a mineral addition to partial replacement of fine aggregates in Portland cement mortar. Characterizations of the raw materials were carried out through X-ray fluorescence spectroscopy, loss on ignition, particle size distribution, Brunauer–Emmett–Teller (BET), real density, X-ray diffraction, scanning electron microscopy, and dispersion spectroscopy of electrons. The mortars were prepared by partially replacing the fine aggregate (sand) with sargassum ash, at 0%, 5%, 10% and 20%. Mortar performance was evaluated through water absorption, apparent porosity, apparent specific mass, compressive strength after 7, 28, and 63 days after curing. Lastly, a life cycle assessment in accordance with ISO standards 14040:2006 and 14044:2006. The results showed that replacing sand with sargassum ash increases water absorption, apparent porosity, and decreases the apparent specific mass and compressive strength as replacement increases. Nevertheless, the compressive strength results after 63 days, for 5 and 10% replacement did not differ statistically from reference values. The life cycle assessment indicates that mortars with partial replacement of sand by sargassum ash showed positive environmental impacts when compared to reference values for most categories regardless of the scenario analyzed, especially for mortar with 10% replacement. As such, the use of sargassum ash at 10% does not alter compressive strength values after 63 days while reducing its environmental impact. The application of this biomass in civil construction materials provides a destination for this algae that has been causing several social, environmental, and economic problems.

Background/Aim: Performing emergency surgery for bowel obstruction continues to place a significant strain on the healthcare system. Conventional assessment methods for outcomes in bowel obstruction cases often concentrate on isolated factors, and the evaluation of results for individuals with bowel obstruction remains poorly studied. This study aimed to examine the risk factors associated with major postoperative complications. Methods: We retrospectively analyzed 99 patients undergoing surgery from 2015 to 2022. We divided the patients into two groups: 1) benign related obstruction (n=68), 2) cancer related obstruction (n=31). We used logistic regression, KNN and XGBOOST. We calculated the receiver operating characteristic curve, and accuracy of the model. Results: Colon obstructions were more frequent in the cancer group (p=0.005). Operative time, intestinal resection and stoma were significantly more frequent in the cancer group. Major complications were 41% for the cancer group vs. 20 in the benign group (p=0.03). Uni-and multivariate analysis shows that significant risk factors for major complication were cancer related obstruction and CRP. The best model was KNN with an accuracy of 0.82. Conclusion. Colonic obstruction is associated with a tumor-related blockage. Malignant cancer and an increase in C-reactive protein (CRP) are significant risk factors for patients who have undergone emergency surgery due to major complications. KNN could improve the process of counseling and the perioperative management of patients with intestinal obstruction in emergency settings.

In the paper, the author presents explicit and unified expressions for a sequence of improper integrals in terms of the beta functions and the Wallis ratios. Hereafter, the author derives integral representations for the Catalan numbers originating from combinatorics.

the close phylogenetic relationship between ascidians (Tunicata) and vertebrates makes them a powerful model for studying the innate immune system. To better understand the nature and dynamics of immune responses and the mechanisms through which bacterial infections are detected and translated into inflammation in Ciona robusta, we applied an approach combining in vivo lipopolysaccharide (LPS) stimulation, immune-labelling and functional enzymatic analyses. The immunohistochemistry showed that toll-like receptor 4 (TLR4) and nuclear factor kappa B (NFκB) were expressed during the inflammatory pharynx response 4 hours post-LPS, with formation of immune-stained haemocyte nodules in the vessel lumen. Pharynx vessel endothelium also took part in the inflammatory response. Observations of histological sections from naive and MS-inoculated ascidians confirmed immuno-positive tissue response. Enzyme immune parameters – which included the activity of phenoloxidase, glutathione peroxidase, lysozyme, alkaline phosphatase and esterase – showed up-modulation 4 hours after LPS injection, confirming their involvement during ascidian inflammatory response. These findings provide new insights into the mechanisms involved in LPS-induced C. robusta response and suggest that a broad innate immune mechanism is involved in the regulation of tunicate inflammatory responses.

Fatigue performance and self-repairing activity of asphalt binders are two properties that highly influence the fatigue cracking response of asphalt pavement. There are still numerous gaps of knowledge to fill linked with these two characteristics. For instance, current parameters fail to fully accommodate these two bitumen phenomena. This study aims to propose a new procedure to address this issue utilizing the linear amplitude sweep (LAS) test, LAS with rest period (RP) (LASH) test, and simplified viscoelastic continuum damage (S-VECD) model. This research work used four different types of asphalt binders: neat asphalt (NA), self-healing thermoplastic polyurethane (STPU)-modified bitumen (STPB), self-healing poly (dimethyl siloxane) crosslinked with urea bond (IPA1w)-modified bitumen (IPAB), and styrene–butadiene–styrene (SBS)-modified bitumen (SBSB). Before the testing process, all the materials were subjected to short-term and long-term aging. The new procedure showed a superior capacity to analyze and accommodate all bitumen fatigue performances and self-repairing activities compared to the current method. Another finding proved that asphalt binders with higher self-restoration behavior failed to show better fatigue performance. A breakthrough finding demonstrated that asphalt binder fatigue response augmented when the RP was applied at a higher damage intensity (S) value. STPBs and IPABs reached their highest increments of fatigue response, containing 1.0% of STPU and 0.5% of IPA1w, respectively. Those augmentations were 207.54% and 232.64%, respectively.

The surface characterization of indium tin oxide (ITO) films was processed by oxygen (O2) plasma gas using a magnetron sputtering method of varying O2-plasma gas from 20 sccm to 100 sccm for potentially fostering in electronic devices applications on dye-sensitize solar cells (DSSC) in this work. In order to gain an outstanding performance rate with high-quality thin films, the affect of correlation between the electrical, optical, and morphology properties was significantly investigated. Clearly, the content of investigation exhibited that the films properties was changed by variation of the gas composition. These changes have contemporary relevance to the sputtering gas during the deposition process. To conclude, the greatest electrical properties was displayed by O2 -plasma gas flow rate of 20 sccm, which showed the lowest resistivity. In addition to this, the final products were practically fabricated to active layers for dye-sensitize solar cells (DSSC) applications. The highest efficiency of DSSC device was indicated of approximately 0.35% which was located by 40 sccm of the O2-plasma gas. Consequently, the study could be a possibility way of preparing ITO thin films with improved special properties of substantial applications for solar cells devices in the near future.

This article aims to analyze the relationship between non-obstructive coronary artery disease (NOCAD) and atrial fibrillation (AF), exploring the underlying pathophysiological mechanisms and implications for clinical management. NOCAD and AF are prevalent cardiovascular conditions that often coexist, yet their interrelation is not well understood. NOCAD, characterized by the presence of atherosclerotic plaques without significant luminal stenosis, can lead to ischemic necrosis of cardiomyocytes and their replacement with fibrous tissue, in this way sustaining the focal ectopic activity in atrial myocardium. Atrial fibrillation, on the other hand, is the most common sustained cardiac arrhythmia, associated with an increased risk of stroke and heart failure, which may accelerate atherosclerosis and may increase oxygen consumption in the myocardium, creating a mismatch between supply and demand, thus promoting the development or worsening of coronary ischemia. Therefore, NOCAD and AF seems to be a complex Interplay with one begets another.

Background: Permanent tracheostomy because of total laryngectomy surgery entails great conse-quences for the patient regarding respiratory physiopathology such as the filtering, humidifying, and heating function of the air by the nose is lost. The use of special stomal filters can determine adequate protection of the trachea-broncho-pulmonary system with a reduction in respiratory pathologies. In fact, in most cases laryngectomee patients are first cigarette smokers who for this reason already have also respiratory diseases such as chronic obstructive pulmonary disease (COPD). Despite the availability of tracheal filters, multiple times, as reported in the literature, the patient tends to limit their use due to reported breathing difficulties, especially in conditions of intense breathing. Methods: The objective of this clinical study was to evaluate the most suitable stomal filter for the laryngectomee patient during physical activity. The filters studied were an INHEALTH device (Blom-Singer SpeakFree HME); two ATOS devices (Provox® Life™ Energy HME and Provox® Life™ Home HME); and an FAHL device (Laryvox HME Sport). Results: For this purpose, the performances of 31 laryngectomee patients, subjected to medi-um-high physical effort, were analyzed through a standardized pneumological test, the Six Minute Walking Test (6MWT) which involves a sustained walk lasting six minutes, with evaluation , every 60 seconds, heart rate, oxygen saturation and meters travelled; furthermore, it examines two sub-jective indices, namely, the basal and final dyspnea index and the initial and final muscular fatigue index.

There is a need to find methods to intensify the anaerobic digestion process. One possibility is the use of pre-treatment techniques. Many laboratory tests confirm their effectiveness, but in most cases, there is no verification work carried out on industrial plants. The aim of the research carried out under laboratory conditions and on a large scale was to determine the technological and energy efficiency of the use of hydrodynamic cavitation in the pre-treatment of a waste mixture from dairy farms. It has been shown that hydrodynamic cavitation significantly increases the concentration of organic compounds in the dissolved phase. In the most effective variants, the increase in the content of these indicators was over 90% for both COD and TOC. The degree of solubilisation achieved was 49±2.6% for COD and almost 52±4.4% for TOC. Under laboratory conditions, the highest effects of anaerobic digestion were achieved after 10 minutes of pre-treatment. The amount of biogas was on average 367±18 mL/gCOD and the amount of methane 233±13 mL/gCOD. Further large-scale optimisation trials showed that after 8 minutes of hydrodynamic cavitation, the biogas yield was 327±8 L/kgCOD with a CH4 content of 62.9±1.9%. With this variant, the net energy yield was 66.4±2.6 kWh/day, a value that was 13.9% higher than the original variant with 10 minutes of disintegration and 3.1% higher than the variant without pre-treatment.

This article systematically studied the A-optimal designs of a high-order mixture central polynomial model, which is an advancement of the research results for the A-optimal design of the most recent third-order mixture central polynomial model and a more accurate response surface model. This article is based on the simplex center design, obtaining measurement values at various design points, and verifying them through the A-optimal equivalence theorem. We also compare the A-efficiency of designs through examples, which can be applied to the A-optimal precise design of the fourth-order mixture model.

The life cycle of a microgrid covers all the stages from idea to implementation, exploitation until its end of life, but with a lifespan of around 25 years. Covering them usually requires several software tools, which can make integration of results from different stages very difficult and may imply costs hard to estimate from the beginning of a project. This paper proposes a single platform of four modules developed in Matlab to assist all the processes a microgrid passes during its lifetime. The authors detail the architecture, functions and the development of the platform, either by using existing tools available in Matlab, or by developing new ones and designing new user interfaces linked with scripts based on its complex mathematical libraries. A proof-of-concept for this platform was presented by applying the life-cycle assessment process on a real-case study, a microgrid consisting in a photovoltaic plant, an office building as consumer and energy storage units.

Convolutional Neural Networks (CNNs) present drawbacks for modeling geometric transformations, such as scaling and rotation, caused by the convolution operation’s locality. Deformable convolution (DCON), a mechanism that substitutes standard convolution, increasing the receptive field to capture relevant features, is a promising approach to solve this drawback and improve the robustness of CNNs. However, the optimal way to replace the standard convolution with its deformable counterpart in a CNN model is unclear. In this study, we clarify this aseveration by conducting several experiments using deformable convolutions applied in the layers that conform a small four-layer CNN model. We also use deformable convolutions on the four-layers of several ResNet CNNs with depths 18, 34, 50, and 101. The models were tested in binary balanced classes with 2D data for image classification: Cats & Dogs, EyesPACS, Spyders & Chickens, and Shapes. After this testing, we evaluated DCON in 3D data for action recognition: UCF101 and Human2 (a dataset we compiled to control movement, clothing and background). The contribution of this research lies in a guideline to use DCON. It can be summarized as follows: if DCON is used on the first layers of the proposal of model (with simple features), the computational resources expressed as the quantity of Flops will tend to increase and produce bigger misclassification than the standard CNN. However, if the DCON is used at the end layers, the quantity of Flops used in the training and testing will decrease, and the classification accuracy will improve by up to 20% about the base model. Moreover, it gains robustness when using deformable convolutions because it can adapt to the region of interest. Also, the best kernel size of the DCON is three. It showed better results than size five. In the last case, the quantity of Flops increase quadratically, but their performance does not increase significantly. With these results, we propose a guideline to use the DCON and contribute to understanding the impact of DCON on the robustness of CNNs.

Bixonimania, a rare hyperpigmentation disorder characterized by a distinctive pink hue on the eyelids, presents a significant diagnostic challenge due to its unique presentation and limited research. This study explores the application of machine learning algorithms for bixonimania detection by analyzing millions of images of individuals exposed to blue light (500-700 nm spectrum). Our findings suggest a potential link between blue light exposure and bixonimania, affecting roughly 1 in 90,000 individuals. The proposed machine learning model achieved an accuracy of 92% in detecting bixonimania based on eyelid hue analysis. This study paves the way for further exploration of bixonimania's underlying causes, improved diagnostic tools, and potential treatment options.

This paper studies the maximum reliability of multi-hop relay UAV, in which UAV provides wireless services for remote users without direct communication link on the ground as a coded cooperative relay. In this paper, the analytical expressions of total power loss and total bit error rate are derived as reliability measures. Firstly, based on the environmental statistical parameters, a LOS probability model is proposed. Then the problem of minimizing the bit error rate of static and mobile UAVs is studied. The goal is to minimize the total bit error rate by jointly optimizing the height, elevation, power and path loss, and subject to the maximum allowable path loss con-straints, transmission power allocation constraints and UAV height and elevation constraints. At the same time the total path loss is minimized to achieve maximum ground communication cov-erage. However, the formulated joint optimization problem is non-convex and generally difficult to solve. Therefore, we decomposed the problem into two subproblems and proposed an effective joint optimization iteration algorithm. Finally, the simulation results are given, and the analysis shows that the optimal height of different reliability measures is slightly different, and using the mobility of UAVs can improve the reliability of communication performance.

The domain of construction engineering and management is evolving rapidly. Optimizing resource positioning is crucial for meeting the challenges of efficiency and productivity. This research presents a novel methodology that incorporates Agent-Based Modeling (ABM), Building Information Modeling (BIM), and Bluetooth Low Energy (BLE) technologies, augmented with a Client Early Warning System (CEWS) and a Decision Support System (DSS). What makes this study unique is that it provides a real-time methodology for resource allocation and project management, tailored to address the complexities of modern construction projects. The application of this integrated technological framework marks a significant leap in construction management, empowering data-driven decision-making and significantly improving project efficiency. Empirically validated through a case study at Helwan University's College of Engineering and substantiated by expert surveys, this research showcases a transformative model for resource management. The findings not only underscore the practical applicability of this approach but also open new horizons for its adoption in global construction practices, offering insights for future research endeavors focused on expanding these methodologies to a wider range of resources.

Metformin, the treatment of first choice in type 2 diabetes (T2D), is known to mainly act by decreasing endogenous glucose production (EGP) in the liver. Paradoxically, in the last decade several reports documented increased EGP after metformin treatment. This increase, was often attributed to pronounced rises in glucagon, consistent with counter-regulatory response to the glucose lowering effect of metformin. However, considering that hyperglucagonemia, but not hypoinsulinemia, is a main driver of EGP in T2D, increased EGP should have been a common finding. This observation, together with the finding that metformin antagonizes glucagon effects on energy expenditure and protein synthesis, concurrently to its effects on EGP and the emerging evidences demonstrating increased branched chain and gluconeogenic amino acids in response to metformin treatment may points to a liver alpha-cell skeletal muscle cross talk similar to that observed in the liver-alpha cell axis. Here, we provide a mechanistic perspective to this latter possibility, based on mechanistic studies of metformin’s transcriptional targets; retaining thus its glucagon antagonistic and presumably anti-gluconeogenic effects on liver and attributing the increase in EGP to renal gluconeogenesis. We finally discuss how increased EGP might reflect an adverse response to metformin treatment, providing support from clinical and epidemiological data.

Critical phases in socio-technical systems (STS) design are the definition of functional requirements for automated or software supported human activities while also addressing social and human interaction issues. To define automation support for human operations, STS designers need to ensure that specifications will satisfy not only non-functional requirements (NFR) of the system but also of its human actors such as human reliability/workload. However, such human factors aspects are not addressed sufficiently with traditional STS design approaches which could lead to systems failure or rejection. This paper proposes a new STS design method that addresses this problem and introduces a novel type of requirements namely Task Support Requirements (TSR) that assists in specifying the functionality that the system should have to support human agents in undertaking their tasks by addressing human limitations. The proposed method synthesizes a requirements/software engineering approach to STS design with functional allocation and an HCI perspective which facilitate application of human factors knowledge in conceptual models and evaluation through VR simulation. A case study methodology is employed in this work that allows in-depth, multi-faceted explorations of the complex issues that characterize STS.

Background: Acute ischemic stroke is among the main causes of mortality worldwide; a rapid and opportune diagnosis is crucial to improve a patient's outcome. MicroRNAs are quite useful for a rapid and accurate diagnosis.Methods: We perform both structural networks approach and a meta-analysis (using a random-effect model to evaluate the heterogeneity and risk bias, according to the PRISMA statement) to analyze the feasibility to develop a microRNA-based biomarker panel for an opportune AIS diagnosis. Results: Structural networks identify a set of eight miRNAs (miR-16, miR-124-3p, miR-484, miR-15a, miR-4454, miR-107, miR-125b-5p and miR-320b) as preliminary microRNA-based biomarker panel, from these only three microRNAs are significantly associated with the main risk factors of AIS, (miR-107: hypertension, 95% CI 9.74-53.24 p<0.0001, type 2 Diabetes mellitus, 95% CI 2.18-19.26); p=0.0008; miR-16 hypertension, 95% CI 1.26-3.56 p=0.0046, smoking, 95% CI 1.07-3.54 p=0.0277; and miR-15a hypertension, 95% CI 1.26-3.56 p=0.0046; smoking, 95% CI 1.07-3.54 p=0.0277). However, the meta-analysis reveals that data is highly heterogeneous and biased; and only microRNAs isolated from plasma samples and further processed in microarrays are the most reliable to distinguish AIS patients.Conclusions: Together our results show that although there are some miRNAs that seem to be associated with AIS, we are still far to develop a miRNA-based biomarker for AIS diagnosis and it is necessary to harmonize the protocols, results and include more populations for further studies otherwise we will remain throwing punches in the dark.

Placental protein 13 (PP13) exhibits a plasma concentration that increases gradually during normal gestation, a process disrupted in preeclampsia, characterized by elevated vascular resistance, re-duced utero-placental blood flow and intrauterine growth restriction. This study investigated PP13’s role in vascular tone regulation and its molecular mechanisms. Uterine and subcutaneous arteries isolated from both pregnant and non-pregnant women were precontracted with the thromboxane analogue U46619, and exposed to PP13 using pressurized myography. The molecular mechanisms were further investigated using specific inhibitors for ni-tric oxide synthase (L-NAME+LNNA at 10-4 M) and guanylate cyclase (ODQ at 10-5 M). Results showed PP13 induced vasodilation in uterine arteries but not in subcutaneous arteries. Ad-ditionally, PP13 counteract U46619-induced vasoconstriction, which is particularly pronounced in pregnancy. Further investigation revealed that PP13's mechanism of action is dependent on activa-tion of the Nitric oxide-cGMP pathway. This study provides novel insights into the vasomodulatory effects of PP13 on human uterine ar-teries, underscoring its potential role in regulating utero-placental blood flow. These findings suggest PP13 may be a promising candidate for improving utero-placental blood flow in condi-tions such as preeclampsia. Further research and clinical studies are warranted to validate PP13's efficacy and safety as a therapeutic agent for managing preeclampsia.

Artificial intelligence (AI) is transforming many healthcare fields including pediatric urology. This in-depth review explores recent advances in AI tools for pediatric urology, emphasizing how state-of-the-art technologies can be used to enhance patient treatment. An initial overview of pediatric urology is given to provide context for this interdisciplinary field and the wide spectrum of problems this entails, before discussing potential uses of AI to improve diagnostic accuracy, treatment planning, and surgical results. AI-powered predictive models are already changing pediatric clinical practice by guiding interpretation of medical images and supporting decision making. In addition to outlining the aims, methods, and conclusions of previous studies on AI applications in pediatric urology, this review also highlights knowledge gaps and priority areas for future study. Particular focus is given to specialized surgeries such pyeloplasty, where AI-guided treatment may help overcome specific technical challenges of this complex procedure. Also highlighted are practical, ethical, and legal aspects of integrating AI into pediatric urology, which will be crucial for responsible innovation in patient-centered treatment. Overall, this article aims to enlighten and inspire clinicians, researchers, and other healthcare stakeholders by offering insight into the future of AI in pediatric urology.

The background of this work is related to the scheduling of household appliances, taking into account variations in energy costs during the day, due to official Brazilian domestic tariffs: constant and white. The white tariff can reach an average price of around 17\% lower than the constant, but charges twice its value at peak hours. In addition to cost reduction, we propose a methodology to reduce user discomfort due to time shifting of controllable devices, presenting a balanced solution through the analytical analysis of a new method here called tariff space, derived from white tariff posts. To achieve this goal, we explore the geometric properties of the movement of devices through the tariff space (geometric locus of the load), over which we can define a limited region in which the cost of a load under the white tariff will be equal to or less than the constant tariff. As a trial for the efficiency of this new methodology, we collected some benchmarks (such as execution time and memory usage) against a classic multi-objective algorithm (Hierarchical) available in the language portfolio in which the project has been executed (Julia language). As a result, both methodologies achieve similar results, but the one presented in this article shows a significant reduction in processing time and memory usage, which could lead to the future implementation of the solution in a simple, low-cost embedded system like an ARM cortex M.

Evidence-based healthcare integrates the best research evidence with clinical expertise in order to make decisions based on the best practices available. In this context, the task of collecting all the relevant information, a recall oriented task, in order to take the right decision within a reasonable time frame has become an important issue. In this paper, we investigate the problem of building an effective Consumer Health Search (CHS) systems that use query variations to achieve high recall and fulfill the information needs of health consumers. In particular, we study an intent-aware gain metric used to estimate the amount of missing information and make a prediction about the achievable recall for each query reformulation during a search session. We evaluate and propose alternative formulations of this metric using standard test collections of the CLEF 2018 eHealth Evaluation Lab CHS.

Background: Esophageal cancer was hardly diagnosed in early stage, and more potential biomarkers should be found. Methods: 252 patients and normal controls which recruited in Renmin Hospital of Wuhan University, were divided into esophageal carcinoma group (105 cases), disease control group (75 cases) and the control group of healthy people (72 cases). Moreover, TISIDB and GEPIA databases were used to investigate the different expression of EC and normal tissues, and explore the roles of C1q in tumor-immune system interactions in EC. Results: The concentration of serum C1q in EC group is 196.8(180~219.4) mg/L, which is higher than the level of DC [178.10(153.70~200.85) mg/L]and HC [183.00(167.75~201.00) mg/L] (P<0.05). A higher expression level of C1q was observed in Ⅲ and Ⅳ grades [214(192~237.3) mg/ml] than grades Ⅰ and Ⅱ [180.95(172.03~193.85) mg/L] (P<0.05). C1q was positively correlated with eosinophils, active CD8 T cells, myeloid derived suppressor cells, natural killer cells, monocytes and macrophages (r = 0.373; r = 0.659; r = 0.846; r = 0.760; r = 0.499; r = 0.757; P<0.05). Conclusion: The concentrations of C1q increased in EC and related to the severity of EC, which had potential value of diagnosis of EC. There were correlations in C1q and tumor-infiltrating lymphocytes.

This study examines the relationship between entrepreneurship and sustainable devel-opment in Saudi Arabia from 2006 to 2022, focusing on the economic, social, and en-vironmental dimensions. Using the Autoregressive Distributed Lag (ARDL) model, the research investigates both short-run and long-run dynamics to understand how entre-preneurial activities influence sustainable development within the framework of Saudi Arabia's Vision 2030 initiative. The findings indicate that entrepreneurship significantly contributes to economic growth through job creation and innovation, thereby aiding in the diversification of the economy away from oil dependency. Socially, entrepreneurial ini-tiatives have a positive impact on gender equality and social inclusion by empowering women and integrating youth into the labour market. Environmentally, entrepreneurship helps reduce carbon emissions and promotes sustainable business practices. Despite these positive outcomes, challenges such as regulatory barriers, limited access to finance, and the need for a supportive entrepreneurial ecosystem remain. Recommendations include enhancing entrepreneurial education, providing financial incentives, and streamlining regulatory processes to better support start-ups and SMEs. The study highlights the ne-cessity of addressing these challenges to fully realize the potential of entrepreneurship for sustainable development in Saudi Arabia. By providing empirical evidence on the sig-nificant role of entrepreneurship in driving sustainable development, this research offers actionable insights for policymakers aiming to foster a more resilient and diversified economy in line with Vision 2030. .

The objectives of the study were to determine the spatial rate of CO₂ flux (Net Ecosystem Exchange) and soil moisture in a wetland ecosystem applying Sentinel-1 IW (Interferometric Wide) data of VH (Vertical Transmit/Horizontal Receive—cross polarization) and VV (Vertical Transmit/Vertical Receive—like polarization) polarization. In-situ measurements of carbon flux, soil moisture, and LAI (Leaf Area Index) were carried out over the Biebrza Wetland in north-eastern Poland. The impact of soil moisture and LAI on backscattering coefficient (σ°) calculated from Sentinel-1 data showed that LAI dominates the influence on σ° when soil moisture is low. The models for soil moisture have been derived for wetland vegetation habitat types applying VH polarization (R² = 0.70 to 0.76). The vegetation habitats: reeds, sedge-moss, sedges, grass-herbs, and grass were classified using combined one Landsat 8 OLI (Operational Land Imager) and three TerraSAR-X (TSX) ScanSAR VV data. The model for the assessment of Net Ecosystem Exchange (NEE) has been developed based on the assumption that soil moisture and biomass represented by LAI have an influence on it. The σ° VH and σ° VV describe soil moisture and LAI, and have been the input to the NEE model. The model, created for classified habitats, is as follows: NEE = f (σ° Sentinel-1 VH, σ° Sentinel-1 VV). Reasonably good predictions of NEE have been achieved for classified habitats (R² = 0.51 to 0.58). The developed model has been used for mapping spatial and temporal distribution of NEE over Biebrza wetland habitat types. Eventually, emissions of CO₂ to the atmosphere (NEE positive) has been noted when soil moisture (SM) and biomass were low. This study demonstrates the importance of the capability of Sentinel-1 microwave data to calculate soil moisture and estimate NEE with all-weather acquisition conditions, offering an important advantage for frequent wetlands monitoring.

Thromboembolic conditions, such as stroke and myocardial infarction [MI], are the primary causes of mortality globally. High efficiency was demonstrated by fibrinolytic enzymes isolated from microbial sources in dissolving various blood clots. The study aimed to investigate and produce bacterial fibrinolytic enzymes from various Egyptian soil conditions using recombinant DNA technology. Fifty soil samples were examined to determine the production of fibrinolytic enzymes. The plasmin plate technique assessed the thrombolytic activities of the strong fibrinolytic enzyme-producing bacterial isolates. In addition to determining the molecular mass using a mass spectrometer and the western blot method, the activity and thermostability of the enzymes were characterized. An affinity chromatography approach was used to purify the fibrinolytic enzymes. However, bacterial recombinant DNA technology produced the pure bacterial fibrinolytic enzyme. Several dosage formulations for the formulation of fibrinolytic enzymes were tested. By using affinity chromatography and the SDS-PAGE test, the isolated bacterial fibrinolytic enzyme in this investigation was almost 83% pure. Bacillus cereus ATCC 4342 was identified as the predominant bacterial isolate secreting fibrinolytic enzymes. It was discovered that the fibrinolytic enzyme activity of fifty soil samples ranged from 0.167 U/ml to 1.853 U/ml. The extracellular enzyme extracted from Bacillus cereus culture supernatant demonstrated a relatively stable fibrinolytic activity over 18 hours at a pH range of 7.4–10, as well as stability with maximum productivity at 43℃ for over 60 minutes. In this investigation, the enzyme was referred to as Fibrin-proteinase[ FP]. The fibrin clots were directly thrombolyzed by the FP. The calculated values for the specific activity and molecular mass of the FP were approximately 40.71 units/mg of protein and approximately 30 KDa, respectively. It was observed that the presence of Fe+3 marginally boosted protease activity, but the presence of EDTA decreased it. On the other hand, adding monovalent cations like K+1 and Na+1 significantly increased the fibrinolytic activity of FP. The enzyme exhibited activity throughout the temperature range of 20 to 65℃, peaking at 55℃. The ideal range for the generation of protease was 35–43℃ and 8.0–10. The thermostable fibrinolytic enzyme FP, which was isolated from Bacillus cereus ATCC 4342 in various soil environments in Egypt during the current study, was a promising fibrinolytic enzyme because it demonstrated a more extensive and effective fibrinolytic activity and fewer side effects than the fibrinolytic enzymes that are currently available worldwide. It is advised that further research be done on optimizing the right formulation of bacterial fibrinolytic enzymes in the future to help dissolve different types of blood clots and, as a result, lower the high death rate that exists worldwide.

Pedestrian trajectories are crucial for self-driving cars to plan their paths effectively. The sensors implanted in these self-driving vehicles, despite being state-of-the-art ones, often face inaccuracies in the perception of surrounding environments due to technical challenges for adverse weather conditions, interference from other vehicles sensors and electronic devices, and signal reception failure, leading to incompleteness in trajectory data. But for real-time decision making for autonomous driving, the trajectory imputation is no less crucial. Previous attempts to address this issue such as statistical inference and machine learning approaches have shown promise. Yet, the landscape of deep learning is rapidly evolving with new and more robust models emerging. In this research, we have proposed an encoder-decoder architecture, Human Trajectory Imputation Model, coined as HTIM, to tackle these challenges. This architecture aims to fill in the missing parts of pedestrian trajectories. The model has been evaluated using the Intersection drone inD dataset, containing trajectory data at suitable altitudes preserving naturalistic pedestrian behavior with varied dataset sizes. To assess the effectiveness of our model, we have utilized L1, MSE, Quantile and ADE loss. Our experiments have demonstrated that HTIM outperforms the majority of the state-of-the-art methods in this field, thus indicating its superior performance in imputing pedestrian trajectories.

Promoting the sustainable development of resource-based cities is of great significance to the ecological protection and high-quality development of the Yellow River Basin. Combining the environmental status and economic development, we objectively evaluate the ecological safety level of resource-based cities in the Yellow River Basin, compare and analysis the main factors affecting the ecological safety of different resource-based cities, and formulate precise and differentiated ecological safety protection measures in river basins to achieve high-quality development. Taking the Yellow River Basin as an example, this paper analyses the ecological level of the Yellow River Basin based on the theory of sustainable development, calculates the ecological safety level of 30 resource-based cities in the Yellow River Basin from 2006 to 2020 by TOPSIS model, and makes convergence analysis by classification. Through the DID empirical test of sustainable development planning policy on ecological safety factors, distinguish the development characteristics of different resource-based cities. The results show that: (1) the ecological safety level of resource-based cities in the Yellow River Basin is generally developing well, and there are differences among different types of resource-based cities; (2) the kinetic energy of sustainable development of resource-based cities in the Yellow River Basin is mainly industrial transformation, and the power of science and technology is insufficient; (3) local governments pay limited attention to environmental protection, and the sustainable development planning of resource-based cities in 2013 mainly promotes the adjustment of industrial structure of resource-based cities.

Based on the theory of behavioral economics, this study deeply analyzes the principles of behavioral economics involved in the development of mass sports, including psychological expectation, selection deviation and incentive mechanism, rationalize the current situation of group sports development, discusses how to effectively promote the development of mass sports, and puts forward a series of concrete countermeasures. In view of the problem of behavioral expectations, it is suggested to establish a comprehensive publicity and education system to improve the public's awareness and understanding of sports, and to stimulate individuals' active participation through self-setting goals and planning methods. In view of the selection bias, it is suggested that the government and relevant institutions provide diversified and attractive sports activity options, and make full use of technological means to increase the visibility and participation of activities.In addition, in view of the incentive mechanism problem, it is advocated to adopt differentiated incentive measures to meet the needs of different groups. The government can provide some preferential policies and establish incentive mechanisms to provide support for the organization of mass sports activities. It is expected that this research can stimulate the enthusiasm of the masses to participate in sports and promote the healthy development of mass sports.

The enhancement of early diagnosis of lung cancer is mandatory to improve prognosis. We observed the increase cancer stem cells (CSC) and circulating tumor cells (CTC) in blood of mice on d3 after Lewis lung carcinoma (LLC) cell implantation before disease symptom. Besides we have developed an approach to reprogramming immune cells by inhibiting the MAPK/ERK pathway through MEKi and the PD-1/PD-L1 immune checkpoint signaling pathway. We hypothesized that reprogramming of spleen CD8+ T-cells could also create a population of immune cells with high antitumor activity. We reprogrammed CD8+ T-cells derived from the spleen of C57BL/6 mice (rsCD8+T-cells). The rsCD8+T-cells were able to migrate to lung and were more resistant after the exhaustion in vitro in comparison with naïve sCD8+T-cells. In the orthotopic LLC model, the rsCD8+T-cells therapy increased the amount of proliferating CD8+ and CD4+ T-cells in blood and lung from mice. The amount of CSC decreased in the blood and lung of mice treated with rsCD8+ T-cells. A morphological study revealed a decrease in the number of metastases in lung tissue. The antitumor effects of rsCD8+T-cells are based on the activation of the host immune response by increasing the populations of CD8+ and CD4+ T-cells and apoptosis of CSCs.

Considerable research on intergroup relations emphasizes attitudes, motivations, and emotions that lead to reduction of prejudice. While factors that actively promote positive intergroup interactions have been emerging, a central theoretical framework has not been formally proposed. To address this gap, we engage a positive psychology lens to explore how and why people overcome their internalized biases to seek out successful and positive intergroup relations, looking to the positive counterparts of traditional prejudice-reduction models to begin building a framework of understanding. We reviewed the literature on values that guide intergroup behavior. After scanning 16,840 records that emerged in PsycInfo using keywords “egalitarian,” “non-prejudice,” and “intergroup,” we assessed 158 articles for eligibility. Among the relevant articles (N = 54), we analyzed authors’ definitions, methods of measurement, types of processes, and outcomes associated with egalitarian and non-prejudice values as they related to intergroup behavior. Overall, there was notable variability in how researchers conceptualized and observed egalitarianism. We discuss the five broad categories of egalitarianism (prejudice reduction, positive expression, concern for others, low social-dominance orientation, and universal orientation) and how they relate to positive or negative, and approach or avoidant outcomes. We propose a centralized model for studying positive values in intergroup contexts moving forward.

Peroxisome proliferator-activated receptors (PPARs) are important targets for cannabidiol (CBD), which mediate many of its biological actions. The hypothesis of the present research assumed that PPARs affect the gut response to different challenge factors in chickens (C. perfringens vs lipopolysaccharides (LPS) from E. coli), and CBD can mediate the pathways of this response. The study proved that CBD and challenge factors significantly affect the expression level of PPARα (P=0.001) and selected genes determining gut barrier function. A positive correlation was demonstrated between PPARs and genes involved in the formation of tight junctions, immune and oxidative stress responses in chickens. Dietary supplementation with CBD actively mediated the expression rate of PPARs, but the mechanism of interaction between CBD and PPARs was different depending on the stress factor used. The addition of CBD to the birds’ diets did not contribute to reducing intestinal permeability under induced stress conditions and did not cause a stress-inducing effect resulting in the increase of cortisol and endotoxin concentration in the blood. CBD also supported the mechanisms of protecting intestinal cells from cytotoxic effects in a C. perfringens challenge. This study indicates the importance of research towards understanding the mechanisms of PPARs as a target for enhancing intestinal barrier function, provides new results on the biological action of CBD in chickens and shows a constant PPARs association with the jejunum mucosa of birds.

Tungsten balls with sub-100-μm diameter can function as probe tips for micro-coordinate measuring machines (CMMs) to measure ultraprecise workpieces such as ceramic bearings with a high aspect ratio. A high-precision measuring system was proposed to evaluate the roundness error of the self-made tungsten ball tips. The principles and mathematical models of the measuring system are illustrated, and the fabrication principle of tungsten balls is introduced. An analysis was conducted on the maximum allowable contact force and bending strength of the tungsten ball tips, and the elastic mechanism was designed based on the analysis. A ruby probe with a sphericity error of 130 nm (A-5003-0577, Renishaw Corporation) used as a reference sphere was measured to verify the system's effectiveness. Repeated measurement experiments were performed for two tungsten ball tips. The results show the roundness error of the tungsten ball-A is between 568.3 and 586.2 nm with a standard deviation of 6.6 nm while the tungsten ball-B’s roundness error is between 898.5 and 958.0 nm with a standard deviation of 19.7 nm. The uncertainty is calculated as 125.8 nm. The developed system can stably measure the roundness of the tungsten ball tips.

Background: This study stands as a pioneer in the histological evaluation of the biological behavior of a novel implant design featuring decompressive cervical blades. Hence, the aim of the present study was to evaluate the healing outcome in cortical regions at where decompressive protocols were adopted using implants equipped with blades. Materials and methods: Blades with varying diameters were integrated into the coronal portion of the implant to prepare the cortical region of rabbit tibiae. The blade diameters differed from the implant collar by the following amounts: control group (0 µm), +50 µm, and +200 µm. Results: No marginal bone loss was detected. Instead, all implants exhibited new bone formation in the coronal region. Complete closure was observed in the CG-0 group, as well as in the TG-50 and TG-200 groups, despite the presence of marginal gaps without primary bone contact at installation. In the apical region, most implants breached the cortical layer. Nevertheless, new bone formation in this region completely closed the osteotomy, effectively isolating the internal environment of the tibia from the external. Conclusions: The use of a blade attached to the implant body enabled precise preparation of the cortical layer, allowing for controlled decompression in the targeted area. This technique resulted in optimal osseointegration with no loss of marginal bone, and complete restoration of marginal gaps ranging from 0 µm to 200 µm.

The combined use of lasmiditan and triptan is unexplored in medical literature. This study aimed to investigate whether the intake of lasmiditan following triptan improves migraine pain. Following triptan intake, if headache relief was less than 50% at 1 hour, patients took 50 mg lasmiditan within 2 hours of migraine onset. Patients recorded headache intensity and adverse events(AEs) caused by lasmiditan at 1, 2, and 4 hours after intake of additional 50 mg of lasmiditan. A significant reduction in pain scale was observed post 50 mg lasmiditan intake (p &lt; 0.001, t-test). Pain relief was reported for 32 migraine attacks (80%) at 1 hour after additional lasmiditan intake. Although AEs were observed in 63% of the patients who took an additional lasmiditan, most were mild and resolved 1 hour after lasmiditan intake. Our study revealed the significant headache reliefs provided by an additional lasmiditan for patients who did not achieve satisfactory results following initial triptan intake for treating migraine. The AEs associated with this treatment strategy were mild and lasted for a short term. This study suggested that the combination of triptan and lasmiditan is promising for the treatment of migraine and should be studied in a randomized placebo-controlled trial.

The use of spherical radial basis functions (SRBFs) in regional gravity field modeling has become popular in recent years. However, to our knowledge, their potential for combining gravity data from multiple sources, particularly data with different spectrum information in the frequency domain, has not been extensively explored. Therefore, band-limited SRBFs, which have good lo-calization characteristics in the frequency domain, are the main tool in this study. We propose a residual and a-prior accuracy comparative analysis method to determine the optimal degree of expansion of SRBFs for gravity data. Using this methodology, we constructed a high-resolution geoid model called ColSRBF2023 in Colorado. The degrees of expansion for terrestrial and airborne data were set to 5200 and 1840, respectively. Results indicate that ColSRBF2023 has a standard deviation (STD) value of 2.3 cm compared to the GSVS17 validate data. This value is 2-6 mm lower than models obtained using different degrees of expansion for gravity data and models from other institutions considered in this study. Additionally, at the 1'×1' grid in the entire target area, ColSRBF2023 has an STD value of 2.4 cm when compared to the validation model. This value is also the best among the options examined in this study. These findings highlight the importance of determining the optimal expansion degree of gravity data, particularly when constructing high-resolution gravity field models in rugged mountainous regions.

A high-performance Lead-free Piezoelectric Energy Harvester (LPEH) based on a Ba0.85Ca0.15Ti0.90Zr0.10O3 + CuO 0.3 wt% (BCTZC0.3) composite was fabricated by sintering at 1450℃. The BCTZC0.3 composite, which has an enhanced high-energy-conversion constant (〖d_33×g〗_33), shows improved piezoelectric power-generation performance when compared with conventional piezoelectric energy harvesters. The BCTZC0.3-based LPEH produces instantaneous maximum power of 8.2 mW and an energy density of 107.9 mW/cm3 in a weak magnetic field of 250 μT. This energy harvester can be used to charge a capacitor and operate a wireless sensor network (WSN) system to provide temperature sensing and radio-frequency (RF) transmission in a 250 μT magnetic field. The proposed LPEH is a promising green-energy device for potentially self-powering WSN systems when applied.

In a previous paper\cite{simplified}, a variation of the Collision-time Statistics method was applied to identify the relevant perturbers for line broadening under the action of a constant magnetic field. As discussed, that version was simplified and inadequate for low magnetic field and/or large perturber mass (ions). The purpose of the present work is to augment the previous work, so that such cases, corresponding to the Larmor radius exceeding the maximum impact parameter, can be handed efficiently. The results may also be used to construct analytic, i.e. impact/unified models under the usual assumptions in these models.

This paper presents the formative assessment to implement mobile portable chest X-ray (PDX) machines for Tuberculosis (TB) contact tracing in Oyo and Osun States, Nigeria. This descriptive qualitative study was carried out in 8 Local Government Areas, and 24 FGDs and 33 KIIs were conducted using a 4-stage sampling technique to select participants. Validated transcribed notes were entered and analysed using Nvivo. The respondents' ages ranged from 17-85 years, with a mean age of 42.08±14.9 years, and 4.0% had a postgraduate degree. The majority of the government officials stated that deploying the PDX machine intervention at the community level is the best means as it offers a level of convenience to the community members in the sense that there will be limited disruption to their daily activities as well as zero concerns about the cost of transportation to the health facility. The portable X-ray machine intervention should be implemented at the community level for contact tracing to allow more TB contacts living with the index patient to be screened. However, the PDX machine can also be set up in a special location, and the TB contacts can be invited for the screening.

Cysteine and its derivatives, including H2S, can influence bacterial virulence and sensitivity to antibiotics. In minimal sulfate media, H2S is generated under stress to prevent excess cysteine and, together with incorporation into glutathione and export into the medium, is a mechanism of cysteine homeostasis. Here, we studied the features of cysteine homeostasis in LB medium, where the main source of sulfur is cystine, whose import can create excess cysteine inside cells. We used mutants in the mechanisms of cysteine homeostasis and a set of microbiological and biochemical methods, including real-time monitoring of sulfide and oxygen, determination of cysteine and glutathione, and expression of the Fur, OxyR, and SOS regulons genes. During normal growth, the parental strain generated H2S when switching respiration to another substrate. The mutations affected the onset time, intensity and duration of H2S production, cysteine and glutathione levels, bacterial growth and respiration rates, and induction of defense systems. Exposure to chloramphenicol and high doses of ciprofloxacin increased cysteine content and GSH synthesis. A high inverse relationship between log CFU/ml and bacterial growth rate before ciprofloxacin addition was revealed. The study points to the important role of maintaining cysteine homeostasis during normal growth and antibiotic exposure in LB medium.

The stepwise hydrogenation of the C=C bond and C=O group of acrolein on Au₃ and Au₅ model systems is investigated using the density functional theory(DFT) PW91 functional. Our results show that the C=C hydrogenation is more favorable than that of C=O bond on Au₃ with the barriers of the rate-determining step being 0.35 and 0.62 eV respectively. On the other hand, the C=O reduction is preferred over the hydrogenation of the C=C bond on Au₅. The corresponding barriers of the rate-determining steps are 0.45 and 0.54 eV, respectively. This demonstrated that the second hydrogenation step controls the reaction on both Au₃ and Au₅ for C=O and C=C hydrogenation and the C=O hydrogenation on Au₅ is preferred over the hydrogenation of the C=C bond, which is helpful to address the reactivity of small size-selected supported gold clusters.

This research aims to apply Artificial Intelligence (AI) methods, specifically Artificial Immune Systems (AIS), to design an optimal control strategy for a multivariable control plant. Two specific industrial control approaches are investigated: I-PD (Integral-Proportional Derivative) and PI-D (Proportional-Integral Derivative) control. The motivation for using these variations of PID controllers is that they are functionally implemented in modern industrial controllers, where they provide precise process control. The research results in a novel solution to the control synthesis problem for the industrial system. In particular, the research deals with the synthesis of I-P control for a two-loop system in the technological process of a distillation column. This synthesis is carried out using the AIS algorithm, which is the first application of this technique in this specific context. Methodological approaches are proposed to improve the performance of industrial multivariable control systems by effectively using optimization algorithms and establishing modified quality criteria. The numerical performance index ISE justifies the effectiveness of the AIS-based controllers in comparison with conventional PID controllers (ISE₁ = 1.865, ISE₂ = 1.56). The problem of synthesis of the multi-input multi-output (MIMO) control system is solved, considering the interconnections due to the decoupling procedure.

In a V2V communication environment, the control of electric vehicle platoons faces issues such as random communication delays, packet loss, and external disturbances. To address these issues, a robust UKF-MPC-based longitudinal control algorithm for the platoon is designed. First, a longitudinal kinematic model of the vehicle platoon is constructed, and discrete state-space equations are established. The robust UKF algorithm is derived by enhancing the UKF algorithm with Huber-M estimation. This enhanced algorithm is then used to estimate the state information of the leading vehicle. Based on the vehicle state information obtained from the robust UKF estimation, feedback correction compensation is added to the MPC algorithm to design the robust UKF-MPC longitudinal controller. Finally, The effectiveness of the proposed controller is verified through CarSim/Simulink joint simulation. Simulation results show that the robust UKF-MPC longitudinal controller performs better compared to the MPC and UKF-MPC longitudinal controllers. When facing the communication delay and packet loss problems, the robust UKF-MPC longitudinal controller has higher control accuracy and less performance degradation. It has strong robustness and stability.

This study proposes a method for image matching between infrared(IR)-RGB images using a deep learning network to estimate the deformation field. We propose a deformation field generator (DFG) that estimates the deformation field of the transformation matrix to match each pixel or IR image to the RGB image. DFG is a network that receives IR and RGB images as input; the output size is two channels and has the sample resolution as the input image. By warping the IR image through a grid-sampler that warps the image according to the value of the deformation field, we can obtain a warped IR image that matches the RGB image. Additionally, to check whether the warped IR image matched the RGB image, the masking images detecting the segmentation of objects were photographed in two images. Without directly comparing IR and RGB images, we proposed mask loss that warps the IR mask image through the deformation field and grid sampler and then compares the warped IR mask image with the RGB mask image. Mask loss solves the spatial similarity comparison problem with multi-modality images, such as IR and RGB images, by comparing the mask image with the same modality image as the mask image.

It is well established the complex exponential and logarithm are multivalued functions, both failing to maintain most identities originally valid over the positive integers domain. Moreover the general case of complex logarithm, with a complex base, is hardly mentionned in mathematic litterature. We study the exponentiation and logarithm as binary operations where all operands are complex. In a redefined complex number system using an extension of the C field, hereafter named E, we prove both operations always produce single value results and maintain the validity of identities such as log_u (w v) = log_u (w) + log_u (v) where u, v, w in E. There is a cost as some algebraic properties of the addition and subtraction will be diminished, though remaining valid to a certain extent. In order to handle formulas in a C and E dual number system, we introduce the notion of set precision and set truncation. We show complex numbers as defined in C are insufficiently precise to grasp all subtleties of some complex operations, as a result multivaluation, identity failures and, in specific cases, wrong results are obtained when computing exclusively in C. A geometric representation of the new complex number system is proposed, in which the complex plane appears as an orthogonal projection, and where the complex logarithm and exponentiation can be simply represented. Finally we attempt an algebraic formalization of E.

The paper presents construction, laboratory tests as well as the first field application of a new fiber-optic rotational seismograph. The system based on fiber-optic gyroscope (FOG) with determined Angle Random Walk of the order of 10-8 rad/Sqrt(s) and a few rad/s maximum detectable amplitude of rotation in the frequency range from DC to 328.12 Hz. It has been designed for rotational seismology area of interest. This work also presents exemplary relevant measurements which were conducted using a set of two devices installed in the geophysical observatory in Książ, Poland.

We have shown that the use of evolutionary gravitational constants G, the speed of light c, and cosmological constant Λ in the Einstein’s field equations leads to a very simple model that fits the supernovae Ia data with a single parameter as well as the standard ΛCDM model with two parameters, and has the predictive capability superior to the latter. We have shown that at the current time G and c both increase as dG/dt = 5.4GH₀ and dc/dt = 1.8cH₀ with H₀ as the Hubble constant, and Λ decreases as dΛ/dt = −1.2ΛH₀. Negative finding on the variation of G with time derived from the analysis of lunar laser ranging data in several studies has been attributed to the fact that these studies did not consider the variation of c simultaneously with G.

We discuss the fate of the correspondence principle beyond quantum mechanics, specifically in quantum field theory and quantum gravity, in connection with the intrinsic limitations of the human ability to observe the external world. We conclude that the best correspondence principle is made of unitarity, locality, proper renormalizability (a refinement of strict renormalizability), combined with fundamental local symmetries and the requirement of having a finite number of fields. Quantum gravity is identified in an essentially unique way. The gauge interactions are uniquely identified in form. Instead, the matter sector remains basically unrestricted. The major prediction is the violation of causality at small distances.

Studying the multi-function bacterial implications on the natural phytochemicals could be among the best solutions for producing clean-label functional juices. This study aimed to develop a high-quality mulberry juice with enhanced antioxidant capacity through fermentation. The juice was fermented using mono- and co-cultures of Lactobacillus casei (LC), L. plantarum (LP), L. paracasei (LPC), L. acidophilus (LA), and L. helveticus (LH) at different time intervals (24, 48, 72, and 96 h). The total phenolic content (TPC), total flavonoid content (TFC), flavonols, anthocyanins, and proan-thocyanidins were determined, along with the antioxidant activity assays and FTIR analysis. The results revealed significant changes in molecular interactions and functional group presence post-fermentation, indicating microbial incorporation's effect on the juice's functional profile. These changes were attributed to the formation of new compounds during fermentation, such as organic acids, alcohols, glycerol, and phenols, as evidenced by the FTIR spectra. Besides, LC-LA and LC-LPC co-culture treatments yield the most substantial stability in TPC, TFC, and TF after 48 h compared to 24 h and 72 h. After 48 h, the co-cultures of LPC-LH (1265.5 GAE/L) and LPC-LA (1145 GAE/L) were increased the TPC after 48 h than the single cultures. Conclusively, LC-LPC and LP-LPC co-culture fermentation was recommended as a cost-effective method to enhance the an-tioxidant potential and the overall phytochemical capacity of mulberry products. The findings of this study provide valuable insights into the potential of fermented mulberry juice as a functional food with improved health benefits.

The need for solvating and encapsulating hydro-sensitive molecules drives noticeable trends in the applications of cyclodextrins in pharmaceutical industry, food, polymer, materials, and agricultural science. Among them, β-cyclodextrin is one of the most used for the entrapment of phenolic acid compounds to mask the bitterness of wheat bran. In this regard, there is still a need for a good predictive model that assesses β-cyclodextrin bitterness masking capabilities for various phenolic compounds. This study uses a dataset of 20 phenolic acids docked to the β-cyclodextrin cavity to generate three different binding constants. The data from docking study were combined with topological, topographical and quantum-chemical features from the ligands in a machine learning-based structure-activity relationship study. Three different models for each binding constant were computed using a combination of Genetic Algorithm (GA) and Multiple Linear Regression (MLR) approaches. The developed ML/QSAR models showed a very good performance, with high predictive ability and correlation coefficients of 0.969 and 0.984, for training and test sets, respectively. The models revealed several factors responsible for a binding with cyclodextrin, showing positive contributions toward the binding affinity values, including such features as presence of six-membered rings in the molecule, branching, electronegativity values, and polar surface area.

Heterodimeric approach has emerged as a promising method for simultaneously targeting multiple receptors on tumor cells using a single molecule. Simultaneous targeting of the prostate-specific membrane antigen (PSMA) and the gastrin-releasing peptide receptor (GRPr) holds the potential to improve the accuracy of prostate cancer diagnosis. This study aimed to develop and compare six alternative routes for stereoselective synthesis of heterobivalent conjugates designed to deliver the chelating agent DOTA to PSMA/GRPr receptors. The comparison of these alternative synthetic approach, considered such factors as efficiency, complexity, synthesis and purification characteristics, as well as yields of the target compounds has been made. Optimal conditions for the stereoselective synthesis of heterobivalent ligands to PSMA and GRP, which could serve as molecular platforms for the targeted delivery of therapeutic and/or diagnostic agents to these receptors, were determined. For synthesized heterobivalent ligand 26^x and heterobivalent conjugate with DOTA 27 complete signal assignment in ¹H, ¹³C, and ¹⁵N NMR spectra was achieved using 2D NMR techniques. Based on these data, comprehensive signal assignments were provided for all final compounds in their NMR spectra.

This paper presents the results of investigations on the kinetic of Brilliant Blue FCF (BB) discoloration reactions in aqueous solutions with different ozone concentrations and pH conditions. Kinetic studies involve knowledge of the structure and properties of the dye and ozone, as well as the experimental conditions. In general, scientists admit that the predominant oxidation pathway is direct (by free oxygen atoms) or indirect (by free hydroxyl radicals), it will depend on influencing factors such as: the physicochemical properties of the dye, the pH of the aqueous solution, ozone concentration, reaction time and the contact mode with/without stirring. In the experimental research, two pathways were chosen following CBB = f(t): 1. constant dye concentration and different ozone concentration on the concentration range (100 - 250 mg/L) at three pH media (acidic, neutral and basic) with and without stirring; 2. Constant concentration of ozone and different dye in the range of concentrations (2.5 - 10 mg/L) under the conditions of point 1. With obtained experimental data the curves CBB = f(t) were drawn and were processed by the integral method of classical kinetic based on first and second order equations. Unfortunately, this simple procedure this not yield any minim full results and any pH level. The rate constants been negative and/or the reaction order been dependent on initial conditions. Due to its structure, the BB dye has several chromophore groups, thus multiple attack centers, resulting in more oxidation by-products, which is why the 1H - NMR spectrum of BB discoloration with ozone was recorded.

Using coherent optical detection and digital signal processing, laser phase noise and equalization enhanced phase noise can be effectively mitigated using the feed-forward and feed-back carrier phase recovery approaches. In this paper, theoretical analyses of feed-back and feed-forward carrier phase recovery methods have been carried out in the long-haul high-speed n-level phase shift keying (n-PSK) optical fiber communication systems, involving a one-tap normalized least-mean-square (LMS) algorithm, a block-wise average algorithm, and a Viterbi-Viterbi algorithm. The analytical expressions for evaluating the estimated carrier phase and for predicting the bit-error-rate (BER) performance (such as the BER floors) have been presented and discussed in the n-PSK coherent optical transmission systems by considering both the laser phase noise and the equalization enhanced phase noise. The results indicate that the Viterbi-Viterbi carrier phase recovery algorithm outperforms the one-tap normalized LMS and the block-wise average algorithms for small phase noise variance (or effective phase noise variance), while the one-tap normalized LMS algorithm shows a better performance than the other two algorithms for large phase noise variance (or effective phase noise variance). In addition, the one-tap normalized LMS algorithm is more sensitive to the level of modulation formats.

Quadruped robots possess significant mobility in complex and uneven terrains due to their outstanding stability and flexibility, making them highly suitable in rescue missions, environmental monitoring, and smart agriculture. With the increasing use of quadruped robots in more demanding scenarios, ensuring accurate and stable state estimation in complex environments has become particularly important. Existing state estimation algorithms relying on multi-sensor fusion, such as those using IMU, LiDAR, and visual data, often face challenges on non-stationary terrains due to issues like foot-end slippage or unstable contact, leading to significant state drift. To tackle this problem, this paper introduces a state estimation algorithm that integrates an Invariant Extended Kalman Filter (InEKF) with a disturbance observer, aiming at estimating the motion state of quadruped robots on non-stationary terrains. Firstly, foot-end slippage is modeled as a deviation in body velocity and explicitly included in the state equations, allowing for a more precise representation of how slippage affects the state. Secondly, the state update process integrates both foot-end velocity and position observations to improve the overall accuracy and comprehensiveness of the estimation. Lastly, a foot-end contact probability model, coupled with an adaptive covariance adjustment strategy, is employed to dynamically modulate the influence of the observations. These enhancements significantly improve the filter's robustness and the accuracy of state estimation in non-stationary terrain scenarios. Experiments conducted with the Jueying Mini quadruped robot on various non-stationary terrains show that the enhanced InEKF method offers notable advantages over traditional filters in compensating for foot-end slippage and adapting to different terrains.

Drag reduction by laminarization, an innovative technology in aerodynamics design, provides the possibility to improve significantly the aerodynamic performance of aircraft and remains to be one of the most promising and effective technologies. In this paper, the design method for transonic natural laminar flow (NLF) wing at high Reynolds number is investigated in details and a new optimization model is established to solve conflicts between the increase of a laminar flow region and the shock wave strength at the trailing edge. In order to numerically handle this competitive situation efficiently, a two-objective hierarchical variable fidelity Pareto evolutionary optimization model based on search space contraction is proposed and implemented. Numerical experiments show that it can capture simultaneously a Pareto front of the two-objectives: a wave drag minimization and a laminar flow region maximization. The results also show that both wave drag and skin friction drag performances of non-dominated Pareto members can be significantly improved via the optimal laminar wing shape and shock wave control device. Nearly 40% of the laminar flow area on the wing surface is achieved at the Reynolds number of 107. It is concluded that the present hierarchical variable-fidelity multi-objective evolutionary optimization method is computationally efficient, and illustrate its potential for solving complex engineering design problems.

A high-gain broadband circularly polarized crossed dipole antenna is designed. This antenna utilizes two pairs of cross dipoles and a pair of phase delay lines to form circularly polarized radiation. Open-circuit stubs are loaded on the four arms of these two pairs of cross dipoles to introduce new circularly polarized resonating frequency. A rectangular ring patch is introduced directly below the cross dipoles to form the third circularly polarized resonating frequency, thereby broadening the axial ratio bandwidth of the antenna. In addition, metal posts are loaded at the four right angles of the rectangular ring patch to increase the antenna gain. Measurement results show that the antenna achieves a 3dB axial ratio bandwidth of 29.2% (1.9 GHz-2.55 GHz) and maintains a gain of 7.5 dB within the passband, exhibiting good circularly polarized radiation performance.

Vibration signal analysis is regarded as a fundamental approach in diagnosing faults in rolling bearings, and recent advancements have shown notable progress in this domain. However, the presence of substantial background noise often results in the masking of these fault signals, posing a significant challenge for researchers. In response, an Adaptive Denoising Autoencoder (ADAE) approach is proposed in this paper. The data representations are learned by the encoder through convolutional layers, while the data reconstruction is performed by the decoder using deconvolutional layers. Both the encoder and decoder incorporate adaptive shrinkage units to simulate denoising functions, effectively removing interfering information while preserving sensitive fault features. Additionally, dropout regularization is applied to sparsify the network and prevent overfitting, thereby enhancing the overall expressive power of the model. To further enhance ADAE's noise resistance, shortcut connections are added. Evaluation using publicly available datasets under scenarios with known and unknown noise demonstrates that ADAE effectively enhances the signal-to-noise ratio in strongly noisy backgrounds, facilitating accurate diagnosis of faults in rolling bearings.

Nowadays, microfluidics has become an anarchist interdisciplinary topic with considerable attention in a wide range of biotechnology applications. In this research work, numerical investigation of microfluidic micro-mixer is carried out using hybrid actuation approach with different micropillar shapes and gaps. For this purpose, COMSOL Multiphysics is used with three different physics such as thermoviscous acoustic to solve acoustic governing equations, laminar physics is used to solve fluid flow governing equations and diluted transport species is used to solve mixing governing equations. The simulations were carried out with flow velocity of 200 µm/s at both inlets with an oscillation frequency of 15kHz. The outcomes were in the form of acoustic characteristics such as acoustic pressure, acoustic velocity, acoustic streaming and mixing index. The results revealed that the inclusion of micropillars enhanced the mixing performance and strength of acoustic field resulting in improvement of mixing performance compared to the case without micropillars. In addition, it was also investigated that blade shape micropillars with 0.150 mm gaps deliver best results compared to the other cases with maximum and minimum values of the mixing index 0.95 and 0.72 respectively. The obtained results can be extremely helpful for design and modifications of hybrid microfluidics micro-mixer.

Measuring the impact of land use regulation on the land market involves identifying and classifying relevant impact factors related to the land market. The objective of this study was to identify land market impact factors in the context of the introduction of land use regulation in Nepal. A desktop review was carried out to identify preliminary set of impact factors, which were reclassified through intuitive analysis based on the degree of thematic closeness. Perspective-based impact factors were identified through the qualitative analysis of primary data collected through semi-structured interviews with the Nepalese land market stakeholders. These independently derived impact factors were compared with the desktop literature review impact factors resulting in fourteen land market impact factors across four dimensions, including transaction cost, valuation, mortgage availability, taxation, and compensation across the economic dimension; lot size, subdivision restrictions, and coordination across the institutional dimension; awareness, expectation and proximity across the social dimension; and risk reduction, quality of residential land, and suitability of zoning classification across the environmental dimension. There was significant overlap and commonality across factors identified from both the literature review and semi-structured interviews. The land market impact factors determined in the study may be adapted and generalized across other countries and could be utilized to better understand the impacts of land policy decisions on urban planning and development. Further research is recommended on the process to operationalize the use of these factors to quantify the impact of land use regulation on different land markets.

Positioning based on wireless signals such as mobile communication networks has become an important means to provide high-precision location services in environments where satellite signals are blocked. In complex environments such as indoor and underground, wireless signal propagation is obstructed and non-line-of-sight (NLOS) phenomena appears due to serious occlusion and reflection. The time delay caused by NLOS effects has little impact on communication system but can significantly increase positioning errors in positioning systems. Therefore, effective suppression of NLOS errors is crucial to improving 5G positioning accuracy. To address the insufficient feature extraction of existing NLOS error suppression methods, the neglect of residual NLOS measurement errors, and poor stability of position estimation results, this paper innovatively proposes a NLOS mitigation and location estimation method for 5G positioning terminals. Simulation and experimental test results demonstrate that the proposed method outperforms the comparative methods both theoretically and practically, achieving an average positioning accuracy of 1.85 meters in complex indoor NLOS environments. The method proposed in this paper provides a new strategy for NLOS error suppression in indoor 5G positioning, which can significantly contribute to high-precision location services based on commercial 5G networks.

This study uses a mass-spring-damping system to simulate the repeated strain of liquefaction cyclic triaxial tests. The two results are compared in this paper to understand the feasibility of the mass-spring-damping system developed in this paper and the feasibility of future research on this related topic and development potential. The main factors affecting this mode's repeated strain are the spring coefficient k and the external force Q0. The spring coefficient has an inverse relationship but does not increase in multiples. The external force has a direct proportional relationship but does not increase the result- a non-multiple increase. When the pore water pressure of the liquefied cyclic triaxial test specimen rises, it will cause the specimen to liquefy, decreasing effective stress, shear modulus G, and damping ratio D, causing an increase in strain. The shear modulus and damping ratio are related to the spring coefficients k and c. Both are variables that change with time. This article takes an original thin-tube specimen at point A in the Yunlin area in Taiwan as a testing example. Through Mathematica software, it can be obtained that the mass m=1kg, the spring coefficient k=244e-0.1t kgf/cm, and the damping coefficient c=0.739e-0.257t kgf-s/cm and external force Q0=10.1sin2πt kg; Finally, this study selected the original thin-tube specimens from four locations in the Yunlin area, and simulated the repeated strain amount of the cyclic triaxial test specimens through a spring-damping system. The results show that the spring-damping system is feasible for simulated cyclic triaxial tests because the model is simple and the parameters are easy to understand and obtain, which also shows the extensibility of this model. Preliminary results of the research show that this model can further simulate the repeated strain obtained by cyclic triaxial tests without considering the increased trend in pore water pressure and the decrease in effective stress during cyclic loading.

Dynamic time history analysis is a powerful and effective method to study the seismic response of tunnels, the dynamic time history to analyze the seismic response of the tunnel in the typical subway in this paper. The analysis results show that the overall levelling of the tunnel will not affect the tunnel too much, and the seismic response of the tunnel is mainly related to the relative displacement of the ground around the tunnel. The analysis results show that the internal force of the tunnel and the tunnel inclination have a good linear relationship, and the tunnel inclination can be used to measure the magnitude of the seismic response of the tunnel.

The paper presents an error model of a measurement chain containing link performing discrete wavelet transform algorithm which is most often the last stage of measurement signal processing. The goal is to determine the uncertainty budget of the input quantities of the wavelet transform algorithm. The error model takes into account parts of analog, analog-to-digital and digital processing, describing the properties of subsequent fragments of the chain using their transmittance and processing functions. The proposed model enables the description of both deterministic and non-deterministic properties of signal errors. The proposed model was validated using an example measurement chain created for this purpose.

The nature of the interaction between Th17 cells and the blood-brain barrier (BBB) is critical for the development of autoimmune inflammation in the central nervous system (CNS). TNF-a or IL-17 stimulation is known to enhance the adherence of Th17 cells to the brain endothelium. The brain endothelial cells (bEnd.3) express VCAM-1, the receptor responsible for inflammatory cell adhesion, which binds VLA-4 on migrating effector lymphocytes at the early stage of brain inflammation. The present study examines the effect of the pro-inflammatory cytokines TNF-a and IL-17 on the adherence of Th17 cells to bEnd.3 The bEnd.3 cells were found to increase production of CCL2 and CXCL1 after stimulation by pro-inflammatory cytokines, while CCL2, CCL5, CCL20 and IL17 induced Th17 cell migration through a bEnd.3 monolayer. This interaction between Th17 cells and the brain endothelium appears to be mediated by VCAM-1 and some chemotactic cytokines. This observation may suggest potential therapeutic targets for the prevention of autoimmune neuroinflammation development in the CNS.

In multi-objective optimization problems, the optimization target is to obtain a set of non-dominated solutions. Comparing solution sets is crucial in evaluating the performances of different optimization algorithms. The use of performance indicators is common in comparing those sets and, subsequently, optimization algorithms. A good solution set must be close to the Pareto-optimal front, well-distributed, maximally extended and fully filled. Therefore, an effective performance indicator must encompass these features as a whole and must be Pareto dominance compliant. Unfortunately, some of the known indicators often fail to properly reflect the quality of a solution set or cost a lot to compute. This paper demonstrates that the Degree of Approximation (DOA) quality indicator, is a weakly Pareto compliant unary indicator that gives a good estimation of the match between the approximated front and the Pareto-optimal front. Moreover, DOA computation is easy and fast.

In spite of prevalence gaps in several micronutrients supporting immune function, significance of their deficits/supplementation for efficacy of vaccines is underinvestigated. Thus, influence of supplementation combining vitamins C and D, zinc, selenium and manganese, and N-acetyl-cysteine on mouse IgG responses and underlying mechanisms to seasonal quadrivalent influenza vaccine (QIV) was investigated. QIV was given in two doses (28 days apart). The supplementation starting 5 days before the first injection increased the total serum IgG titre, through stimulation of germinal centre (GC) reaction in secondary lymphoid organs (SLOs), as indicated by increase in the frequency of GC B cells and follicular CD4+ T helper (Th) cells, and IL-21-producing Th cells. Additionally, the supplementation “optimized” IgG response following the second QIV injection by supporting more favorable (in respect to virus clearance) IgG2a response through favoring Th1 differentiation as indicating by Th1 (INF-γ) /Th2 (IL-4) signature cytokine level ratio upon QIV restimulation in SLO cell cultures. This most likely reflected partly their antioxidant action (as indicated by redox status analyses) on Th cell differentiation. Thus, the study forms solid base for further research aimed at repurposing use this safe and inexpensive micronutrient combination as an adjuvant for virus influenza vaccine.

The consumption of insects in the Democratic Republic of Congo is an ancient practice. The taxonomic identification and characterization of “entomophagy” seem urgent in Kinshasa following the related anthropogenic pressures (demographic pressure, uncontrolled urbanization) leading to a food crisis. This study aims to assess the diversity of edible insects and their consumption by the population of Kinshasa. A total of 360 people were surveyed to identify the insect species consumed in Kinshasa, the ecosystems that provide them, and the preference for species in relation to ethnolinguistic groups, churches (faith) and household size. Three species of insects most consumed in Kinshasa are: Gonimbrasia jamesonii, Cirina forda and Brachytrupes membranaceus. 41.9% of these insects are consumed by the Kongo ethno-linguistic group, 23.6% by the Luba, 20.6% by the Ngala and 13.9% by the Swahili. Inhabitants of the communes of Kassa Vubu (57%), Maluku (54%), Masina (54%) and Mont-Ngafula (39%) mainly consume C. forda and G. jamesonii. Luba and Kongo ethnolinguistic groups mainly consume C. forda while the Swahili and Ngala consume G. jamesonii. Catholic, Revivalist Church, Kimbagu, Islam, Protestant and Johovah's Witness believers mainly consume C. forda and G. jamesonii. This study made it possible to understand the socio-cultural influence on the degradation (pressure) of biodiversity and; contributes to SDGs 2 and 12 by 2023..

Outdoor lighting is becoming increasingly widespread, and residents are suffering from serious light pollution as a result. Residents’ awareness of their rights to protection has gradually increased. However, due to the sometimes-inaccessible nature of residential vertical light incidence intensity data and the high cost of obtaining specific measurements, there is no appropriate hierarchic compensation for residents suffering from different degrees of light pollution. It is therefore important to measure light pollution levels and their damage at the neighborhood scale to provide residents with basic materials for proper protection and to create more politically suitable solutions. This article presents a light pollution assessment method that is easy to perform, is low-cost, and has a short data-processing cycle. This method can be used to monitor residential zone light pollution in other cities. We chose three open areas to test the spatial variation pattern of light intensity. The results are in accordance with spatial interpolation patterns and can be fit, with high precision, using the IDW method. This approach can also be used in 3 dimensions to quantitatively evaluate the distribution of light intensity distribution. We use a mixed-use zone in Beijing known as The Place as our case study area. The vertical illumination at the windows of residential buildings ranges from 2 lux to 23 lux; the illumination in some areas is far higher than the value recommended by CIE. Such severe light pollution can seriously interfere with people's daily lives and has a serious influence on their rest and health. The results of this survey will serve as an important database to assess whether the planning of night-time lighting is scientific and whether it provides residents with a basis for the protection of their rights.

Background: This study aimed to examine the obesity¬ stress, weight control behavior, and self-control in overweight and obese female university students, and identify the mediating effect of self-control in the relationship between obesity stress and weight control behavior. Methods: This study employed a descriptive correlational design. A total of 109 female university students who were overweight and obese participated in the study. Data were analyzed using descriptive statistics, Pearson's correlation coefficient analysis, and Bootstrapping using Hayes' PROCESS macro for mediation. Results: Significant relationships between obesity stress and weight control behavior (r=0.25, p<0.001), obesity stress and self-control (r=-0.36, p<0.001), and weight control behavior and self-control (r=.26, p<.001) were observed. Self-control showed indirect mediating effect on the relationship between obesity stress and weight control behavior. Conclusion: Therefore, development of programs and strategies for improving self-control is necessary in order to decrease obesity among female university students.

ccurate recording of growth indicators for aquaculture species at different stages is essential for evaluating aquaculture production effectiveness and the rationality of feed formulations. Due to their convenience and non-invasiveness, weight, length, and condition factor are commonly used to assess the growth of aquaculture species . However, fish growth indicators, can vary significantly with age structure and feed components(nutrition), and relying on a single indicator may lead to misjudgments . In this study we investigated the growth indicators of gibel carp (Carassius auratus gibelio var. CAS V) at different growth stages (juvenile and adult) and different feed formulations. Meanwhile, fish weight-length relationship () was used to assess the growth indicators. The results showed that the weight-length relationship of gibel carp varied significantly with age and feed formulations. Additionally, the condition factor calculated depended on the weight-length relationship was more consistent with weight/length changes than measured. Weight analysis indicated that both weight, length, height, back thickness, and carcass ration had higher weights in analyzing fish growth. Therefore, during aquaculture production, fish growth evaluating requires considering diverse indicators such as weight, length,body height, back thickness, carcass ration,as well as condition factor to avoid misjudging the actual growth situation. Meanwhile, the use of the condition factor should consider the sufficient amount of data and whether the assumptions (such as being in a isometric growth period) are met.

Attention mechanisms have become a fundamental component of deep learning, including the field of computer vision. The key idea behind attention in computer vision is to help the model focus on the relevant spatial regions of the input image, rather than treating all regions equally. The traditional approaches to attention mechanisms in computer vision often suffer from distribution inconsistencies in the attention maps, resulting in sharp transitions that negatively affect model’s focus and lead to poor generalization on complex shapes. The problem of spatial incoherence is particularly pronounced in the task of semantic segmentation, where accurate pixel-level predictions require a detailed understanding of the spatial relationships within the image. In this paper, we propose an attention mechanism called Smooth Attention designed for convolutional neural networks to address the problem of spatial inconsistency in attention maps through multidimensional spatial smoothing. We conduct a series of experiments to evaluate the effectiveness of the proposed mechanism and demonstrate its superior performance compared to traditional methods.

Real time condition monitoring and precision health assessment system is a mandatory need for effective maintenance program in industrial sector. Rapid advancement in the information technology and other engineering technologies have invited more proactive attention from research and development in industrial sectors and particularly in condition monitoring of machines and related Industrial processes. In this work, drill bit condition monitoring techniques have been developed based on wavelet analysis and artificial neural networks (ANN) for automatic drill bit fault detection and classification. An experimental work has been conducted to capture the vibration signals for analysis. In this experiment, the CNC drill machine is used with high carbon steel drill bit and mild steel material as work piece. The cutting condition parameters are kept constant and the wear level is varied from 0.2 to 0.6 mm. The Data Acquisition system (DAQ) with Lab VIEW software is used to capture the vibration signals for drill bit with different wear conditions using accelerometer. The captured vibrations data are analyzed using continuous wavelet transform (CWT) with Morlet wavelet and Daubechies wavelet as a prime function. In general, the CWT coefficient is used to generate the inputs features to ANN for automatic tool condition classification, with two outputs (0, 1) for healthy and (1, 0) for faulty. The outcome of ANN showed 98% of accuracy in the wear prediction and this results show the effectiveness of the combed WT and ANN for automatic classification of tool wear conditions with high success rate.

Embracing Fourth Industrial Revolution(4IR) techniques is a need for a long-term sustainability and to do automation in the processes of Industrial and education sector. Rapid advancement in the information technology and other engineering technologies demand more proactive steps in the education institutes. In the post pandemic world, there is an increasing demand of changes in teaching and learning methodologies with the support of modern digital technologies. So, all of the teaching institutes need to have a significant step change in the areas of learning and teaching. The impact of 4 IR is more on the education sectors compared to previous generation’s industrial revolution. Keeping track of key technologies can be quite a challenge as they keep evolving at a very fast pace. Fourth Industrial revolution is the current technological digital revolution in which major focus is on cyber physical and biological systems such as Artificial Intelligence, Robotics, Internet on Things, Virtual Reality etc., The educators and institutions should establish the pedagogies and teaching with the aid of Industry 4.0 techniques to evolve education 4.0. So, it is very important to understand the challenges and competencies required about the implementation of 4IR by the faculty members and students who are currently studying in Higher Education Institutes (HEIs). This paper aim is to do a systematic review about industry 4.0 techniques and its application in relate to the online learning and teaching, change in pedagogies, enhancement of data management in HEIs, digital and virtual laboratories etc.

Microsporidia are intracellular parasites infecting a wide range of vertebrates and invertebrates. In bees, they cause a diarrheal disease called nosematosis, which represents a growing problem contributing to the decline of bee colonies. This parasitic disease infects the gastrointestinal tract of bees, disrupts their immune system, weakens them, and shortens their lifespan. There are two known species of this microsporidial parasite with a global distribution: Vairimorpha apis and Vairimorpha ceranae, with current research indicating that the species V. ceranae is gradually replacing V. apis. In this study, we focused on the detection and occurrence of Vairimorpha spp. in bee colonies kept in different environments, as well as on comparing the impact of hive location on its occurrence. The methods used included sampling from winter bee carcasses, microscopic examination of bee gut contents, and subsequent molecular duplex PCR analysis. Altogether, we examined 82 hives located at 4 different sites and focused on the impact of transportation as an abiotic factor disturbing bees leading to the development of Vairimorpha spp. disease. The results indicate an increased occurrence of this parasite in hives located in urban sites and hives situated in intravillage locations, which may be attributed to transportation and associated vibrations as an abiotic stress factor. Detection revealed that all samples were positive for Vairimorpha ceranae.

Effective management of the medicine supply chain is crucial for ensuring the availability of essential medicines and supplies in public health facilities. This study aimed to determine the utilization of the electronic logistic management information system (e-LMIS) in public health facilities and its implications for the medicine supply chain. A mixed-methods approach, combining both quantitative and qualitative data collection methods was used. The study was conducted in 106 healthcare providers from 35 public health facilities in Singida District. Six key informants were interviewed in a qualitative method. Of 106 participants, (62.3%) said they were somehow competent in e-LMIS utilization. In in-depth interviews, respondents underscored the system's utility for tracking stock levels, procurements, and managing orders. Staff shortage and lack of customized training were mentioned as major challenges, hindering efficiency in managing drug supplies. This study highlighted the positive impact of e-LMIS on various aspects of the medicine supply chain, including the timely submission of orders and enhanced inventory management. Sustained management support and regular utilization of the e-LMIS system are crucial for building and maintaining competence among healthcare providers, thereby optimizing the medicine supply chain and ultimately improving healthcare delivery.

Laparoscopic partial nephrectomy (LPN) after hyperselective embolization of tumor vessels (HETV) in a hybrid operating room (HOR) that combines traditional surgical equipment with advanced imaging technology, is a non-clamping surgical approach to treat localized kidney tumors that have shown promising short-term results. The aim of this study was to evaluate the long-term oncological and functional outcomes of this procedure. All consecutive patients treated for a localized kidney tumor by LPN after HETV between May 2015 and October 2022 in a single academic institution were included in the study. Clinical, pathological and biological data were collected prospectively in the uroCCR database. We evaluated perioperative data, postoperative complications, surgical margin and modification of renal function after surgery. We included 245 patients. Median tumor size was 3.2 (2.5-4.4) cm. The R.E.N.A.L. complexity was low, medium and high for 104 (43.5%), 109 (45.6%) and 26 (10.9%) patients, respectively. Median LPN time was 75 (65 -100) min and median blood loss was 100 (50-300) mL. Surgical postoperative complications occurred in 56 (22.9%) patients with 17 (5.7%) major complications. The median preoperative Glomerular Function Rate (GFR) was 90.5 (77-101.8) mL/min and the median GFR variation at 6 months was -7.5 (-15- -2) mL/min. Malignant tumors were present in 211 (86.1%) patients and 12 (4.9%) patients had positive surgical margins. After a median follow-up of 27 (8-49) months, 20 (8.2%) patients had a tumor recurrence and 4 (1.6%) died from cancer. The use of a HOR to perform LPN after HETV is a safe and efficient non-clamping approach to treat localized kidney tumors.

This study aimed to investigate the prevalence, location, and characteristics of new-onset chronic pain by using a new definition in long-term survivors after discharge from a tertiary emergency center. We conducted a single-center ambidirectional cohort study from January to May 2022. A survey of patients was conducted by postal mail 2-2.5 years since their discharge from a tertiary emergency center. We used the Brief Pain Inventory to investigate chronic pain parameters, and the painDETECT questionnaire to investigate neuropathic pain. Patient information during hospitalization was collected retrospectively from medical records. The survey was sent to 78 patients, 63 (81%) of whom responded and were included in the analysis. Nine of the 63 patients (14%) had new-onset chronic pain. Of these, six (67%) had chronic pain of moderate or severe intensity which interfered with daily life. The most frequent location of chronic pain was the ankle/foot (n=4, 44%). Neuropathic pain was present in four (44%) patients with new-onset chronic pain. New-onset chronic pain may occur for up to 2-2.5 years after discharge from a tertiary emergency center, and this may interfere with daily life. Therefore, a follow-up system for chronic pain is warranted.

People who suffer a mild traumatic brain injury (mTBI) have heterogeneous symptoms and disease trajectories, which make it difficult to precisely diagnose and assess complications long-term. Insufficient information is available regarding how to precisely diagnose and assess mTBI. This study identified and compared deficits in cognitive, psychosocial, visual functions, and balance performance between college students with and without histories of mTBI. Global DNA methylation ratio (5-mC%) in blood was also compared as a peripheral epigenetic marker. Twenty-five volunteers participated in this pilot study, including 11 mTBI cases (27.3% females; mean age of 28.7 years, SD=5.92) and 14 healthy controls (64.3% females; mean age of 22.0, SD=4.13). All the participants were assessed for cognitive (by NIH toolbox—executive function, memory, and processing speed), psychological (by PROMIS—depression, anxiety, and sleep disturbances), visual function (by King-Devick and binocular accommodative tests), postural balance performance (by a force plate), and blood 5-mC% (global methylation) levels. Students with mTBI reported significantly poorer episodic memory, severe anxiety, and more sleep disturbance problems. They also had higher blood 5-mC% level (all p’s<.05). No significant differences were found in visual function and postural balance. These findings validate changes in cognitive, psychosocial, and global DNA methylation long after mTBI.

The aim of this study of patients with chronic kidney disease (CKD) is to assess the safety of daily consumption of walnuts on the physiological levels of phosphorous, potassium, parathyroid hormone (PTH), and fibroblast growth factor 23 (FGF23), and to assess the short-term benefits of this intervention on risk factors associated with cardiovascular events. This led us to perform a prospective, randomized, cross-over, pilot clinical trial examined 13 patients with chronic kidney disease (CKD). Subjects were randomly assigned to a diet of 30 g of walnuts per day or the control diet. After 30 days, each group was given a 30-day washout period, and then switched to the alternate diet for 30 days. Urinary and serum levels of phosphorous and potassium, multiple vascular risk factors, and urinary inositol phosphates (InsPs) were measured at baseline and at the end of the intervention period. Our results showed that the walnut dietary supplement led to reduced blood pressure, LDL cholesterol, and serum albumin, but had no effect on the physiological levels of phosphorous, potassium, PTH, and FGF23. This is the first report to show that daily consumption of walnuts by patients with CKD does not alter their physiological levels of phosphorous, potassium, PTH, and FGF23. Consequently, this dietary supplement may prevent cardiovascular events in patients with CKD.

Anaerobic digestion is a biological process that transforms high-strength organic effluents into biogas with multiple benefits. However, concurrent with organics' biological transformation, a liquid phase with a high solid content is also derived from this process. Valorizing this fraction is not an easy task if an agronomic application cannot be considered as a suitable option. The thermal valorization of this fraction allows for energy extraction, but also gives rise to additional capital investment and increases the energy demand of the global process. In addition, the thermal treatment of digestate has to deal with a mineralized material. The changes in organic matter due to anaerobic stabilization were studied in the present manuscript, by evaluating the thermal behavior of samples, activation energy and organic transformation using FTIR spectroscopy. Digested samples of a mixture composed of manure and glycerin (5% v/v) were studied. The stabilization caused a dramatic decrease in aliphatic compounds, greatly increasing the mineral content of the sample. Thermal valorization of digestates must consider the lower energy content and more complex structure of these materials, with higher content of lignin and protein-type compounds.

Vertical Indoor Farming (VIF) with hydroponics offers a promising perspective for sustainable food production. Intelligent control of VIF system components plays a key role in reducing operating costs and increasing crop yields. Modern machine vision (MV) systems use Deep Learning (DL) in combination with camera systems for various tasks in agriculture, such as disease and nutrient deficiency detection, and flower and fruit identification and classification for pollination and harvesting. This study presents the applicability of MV technology with DL modelling to detect the growth stages of chilli plants using YOLOv8 networks. The influence of different bird’s eye and side view datasets and different YOLOv8 architectures was analysed. To generate the image data for training and testing the YOLO models, chilli plants were grown in a hydroponic environment and imaged throughout their life cycle using four camera systems. The growth stages were divided into growing, flowering and fruiting classes. All trained YOLOv8 models showed reliable identification of growth stages with high accuracy. The results indicate that models trained with data from both views show better generalisation. YOLO’s middle architecture achieved the best performance.

There is no doubt that seagrass beds constitute one of the most productive ecosystems in shallow coastal waters. Despite this, picoplankton in seagrass ecosystems has received relatively little attention. The purpose of this study was to compare picoplankton growth and mortality rates between seagrass and unvegetated habitats using chamber incubations. We tested two main hypotheses: (i) incubation with seagrass would result in higher bacterial growth rates due to increased DOM release from seagrass photosynthesis, and (ii) Synechococcus spp. would be lower in the presence of seagrass due to competition for inorganic nutrients. Our results showed bacterial growth rates of 2.31 and 2.44 d–1 without and with seagrass, respectively. In seagrass chambers, bacterial growth was higher than that in non-seagrass chambers, suggesting that organic carbon coming from the seagrass community may support bacterial production. Furthermore, we observed a negative Synechococcus spp. growth rate (-0.9 d–1) in the seagrass treatment, likely reflecting nutrient competition with the seagrass. Small-scale chambers proved to be a useful tool for studying the factors controlling spatial and temporal patterns of picoplankton across different habitats. Furthermore, future studies should examine picoplankton growth over a wider range of spatial scales in seagrass beds and adjacent unvegetated sediment.

The toxic cadmium (Cd) poses a serious threat to plant growth and human health. Populus euphratica CPK21 has previously been shown to attenuate Cd toxicity by reducing Cd accumulation, enhancing antioxidant defense and improving water balance in transgenic Arabidopsis. Here, we confirmed a protein-protein interaction between PeCPK21 and AtNF-YC3 by yeast two-hybrid, HaloTag pull-down and bimolecular fluorescence complementation assays. AtNF-YC3 was induced by Cd and strongly expressed in PeCPK21-overexpressed plants. Overexpression of AtNF-YC3 in Arabidopsis reduced salt inhibition of root length, fresh weight and membrane stability under Cd stress conditions (100 µM, 7 d), suggesting that AtNF-YC3 appears to contribute to the improvement of Cd stress tolerance. AtNF-YC3 improved Cd tolerance by limiting Cd uptake and accumulation, activating antioxidant enzymes, and reducing H2O2 production under Cd stress. We conclude that PeCPK21 interacts with AtNF-YC3 to limit Cd accumulation, enhance the ROS scavenging system, and thereby positively regulate plant adaptation to Cd environments. This study highlights the interaction between PeCPK21 and AtNF-YC3 under Cd stress conditions, which can be utilized to improve Cd tolerance in higher plants.

Dead reckoning is a promising yet often overlooked smartphone-based indoor localization technology that relies on phone-mounted sensors for counting steps and estimating walking directions, without the need for extensive sensor or landmark deployment. However, misalignment between the phone’s direction and the user’s actual movement direction can lead to unreliable direction estimates and inaccurate location tracking. To address this issue, this paper introduces SWiLoc, an enhanced direction correction system that integrates passive WiFi sensing with smartphone-based sensing to form Correction Zones. Our two-phase approach accurately measures the user’s walking directions when passing through a Correction Zone and further refines successive direction estimates outside the zones, enabling continuous and reliable tracking. In addition to direction correction, SWiLoc extends its capabilities by incorporating a localization technique that leverages corrected directions to achieve precise user localization. This extension significantly enhances the system’s applicability for high-accuracy localization tasks. Additionally, our innovative Fresnel zone-based approach, which utilizes unique hardware configurations and a fundamental geometric model, ensures accurate and robust direction estimation, even in scenarios with unreliable walking directions. We evaluate SWiLoc across two real-world environments, assessing its performance under varying conditions such as environmental changes, phone orientations, walking directions, and distances. Our comprehensive experiments demonstrate that SWiLoc achieves an average 75th percentile error of 8.89 degrees in walking direction estimation and an 80th percentile error of 1.12 meters in location estimation. These figures represent reductions of 64% and 49%, respectively for direction and location estimation error, over existing state-of-the-art approaches.

This study explores how the Household Dietary Diversity Score (HDDS) and spatial visualization can inform food governance in Chile, focusing on socio-demographic and geographical determinants affecting food consumption patterns. A national household database (n=4,407) provided by the “Family Support Program of Food Self-Sufficiency” (FSPFS) of the Ministry of Social Development and Family was analyzed. The findings revealed that Chilean vulnerable households were led mostly by women (86.6%), with an age average of 55.9 15.6 years old, versus 68.9 12.9 years in the case of men. The intake frequency analysis showed that dairy, fruits, and vegetables were below the recommended values in at least half of the households, and that fats and sugars were above recommended levels. Regarding the HDDS [0-189], the national average was of 91.4 ± 20.6 and was significantly influenced by the number of minors in the households, water access, food access issues, and residing in the Zona Sur. Finally, the spatial visualization showed that the Zona Central had higher consumption of fruits and vegetables, while the extreme zones Norte Grande and Zona Austral showed higher intakes of fats and sugars. These findings emphasize the importance of leveraging data insights like HDDS and spatial visualization to enhance food security and inform food governance strategies.

The increasing demand for large-scale, high-frequency environmental monitoring has driven the adoption of satellite-based technologies for effective forest management, especially in the context of climate change. This study explores the potential of SAR for estimating the mass of harvesting residues, a significant component of forest ecosystems that impacts nutrient cycling, fire risk, and bioenergy production. The research hypothesizes that while the spatial distribution of residues remains stable, changes in moisture content—reflected in variations in the dielectric properties of the woody material—can be detected through SAR techniques. Two models, generalized linear model (GLM) and random forest (RF), were used to predict the mass of residues using interfer-ometric variables (phase, amplitude and coherence) as well as the backscatter signal from several acquisition pairs. The models provided encouraging results (R2 of 0.48 for GLM and 0.13 for RF), with acceptable bias and RMSE. We concluded that SAR data are feasible to predict the mass of harvesting residues and the findings could lead to improved monitoring and management of forest residues, contributing to sustainable forestry practices and enhanced bioenergy resource utilization.