Abstract Objective: To evaluate audiological outcomes, quality of life, and complications in patients implanted with Active middle ear implants (AMEI). The secondary objective is to investigate the required duration after implantation to reach satisfactory outcomes. Methods: This retrospective study included 31 patients implanted with Active middle ear implants (AMEI) with different methods of floating mass transducer attachment. Patients with incomplete medical records and those who did not respond to postoperative follow-up were excluded. Patients were assessed preoperatively, and at one, three, and six months postoperatively. The assessment included Pure Tone Average (PTA4), Speech Reception Threshold (SRT) and Speech Discrimination Score (SDS). The Speech Spatial and Qualities of Hearing scale (SSQ12) was also used to evaluate levels of satisfaction. Result: There are no significant differences found in PTA and SRT between the 3-, 6-, and 12-month visits. The speech reception threshold (SRT) showed a statistically significant improvement at 3, 6, and 12 months post-operative measures compared to pre-operative. Additionally, the SDS exhibited a significant increase only after 12 months, compared to the 3-month time point. However, satisfaction levels did not significantly differ between the 6-month and 12-month measurements following surgery. Conclusion: Vibrant Sound bridge improves subjective satisfaction scores and audiological test scores in patients with different types of hearing loss. AMEI has a low risk of medical or surgical complications, the ease of using a hearing implant, and the social benefits of good hearing and communication.

Porous α-Al2O3 ceramics is a highly demanded material for multitude applications such as filters, substrates, biomedicine materials, etc. Despite the availability of the raw materials, a challenge of their technology is in a high energy budget caused by the sintering above 1500 °C. For a cold sintering processing (CSP) of ceramics, the lowering of α-Al2O3 sintering temperature is one of the most urgent challenges at the background of its rapid development. The current paper for the first time demonstrates the solution of the mentioned problem by the CSP of α-alumina ceramics in a presence of pure water as a transient liquid. The manufactured materials were examined by XRD analysis; the evolution of their microstructures during the CSP was revealed by SEM, and the porosity evaluated by the Archimedes method. The ceramics with an open porosity up to 36 % was produced at 380-450 °C, 220 MPa in 30 min. An increase in the pressure was found to impede α-Al2O3 formation from γ-AlOOH. The development of the microstructure was discussed within the frameworks of the dissolution-precipitation model and the homogenous nucleation. The results of the SEM study pointed to the coalescence of γ-AlOOH grains during the CSP.

Undoubtedly, there is a potential impact of large language models like ChatGPT in revolutionizing information retrieval and knowledge discovery, particularly in the context of the vast amount of electronic material available. On another strong note, the current work offers a first time ever mathematical approach to accurately fine tune perplexity AI, which sets a giant step ahead towards accurate next generations AI. Having started this world leading discovery, the upper and lower bounds of perplexity AI, namely , , respectively, are obtained for the first-time ever. Concluding remarks combined with emerging open problems and next research phase are provided.

Accurate diagnosis for the 400 million people with rare diseases is critical for healthcare decisions, prognosis, understanding disease mechanisms, and identification of treatments. Despite advances in genome sequencing, barriers such as high interpretation costs, diagnostic expertise, throughput associated delays, and uncertain variant classifications persist, with demand exceeding capacity. Many variant classification methods focus narrowly on specific consequences, leading to the use of complex integrative pipelines that often overlook transcript variability and lack prediction transparency. To overcome these limitations, we introduce DITTO. This transparent, transcript-aware machine-learning method demonstrates superior overall performance in accuracy, recall, and precision when compared to existing tools. DITTO is publicly available at https://github.com/uab-cgds-worthey/DITTO

The study evaluated the regenerative responses of the lacrimal functional unit (LFU) after Lacrimal Gland (LG) ablation. The LG of Wistar rats were submitted to G1) partial LG ablation, G2) partial ablation and transplantation of an allogeneic LG, or G3) total LG ablation, (n=7-10/group). The eye wipe test, slit-lamp image, tear flow, and histology were evaluated. RT-PCR analyzed inflammatory and proliferation mediators. The findings were compared to naïve controls after 1 and 2 months (M1 and M2). G3 presented increased corneal sensitivity, and the 03 groups have shown corneal neovascularization. Histology revealed changes in LG, and corneal inflammation. In the LG, there was an increase in MMP-9 mRNA of G1 and G2 at M1 and M2 and RUNX-1 at M1 and M2 in G1 and RUNX-3 mRNA at M1 in G1, and in G2 at M2. TNF-α mRNA rose in the corneas of G1 and G2 at M2. There was an increase in the IL-1β mRNA in the Trigeminal Ganglion of G1 at M1. Without changes in tear flow or evidence of LG regeneration, LG ablation or grafting are unreliable models for dry eye or LG repair in rats. The surgical manipulation extended inflammation to the LFU.

In the process of oil and gas development and production, when the flow rate in the wellbore is large, the materials underground will be eroded, causing the operation to be unable to proceed smoothly and reducing the efficiency of oil and gas production. Therefore, optimizing the anti-erosion coating under high-speed flow conditions in wellbore is a very interesting thing. It can greatly improve operational efficiency. In this paper, laser cladding was used to prepare the new coating used in the PDC drill bit. Then, the effects of tungsten carbide and multi-layer graphene on the microstructure and properties of the tungsten carbide coating were studied. The research results indicate that, for new coatings, 60% tungsten carbide and 0.3% graphene are the optimal ratios. After adding WC, the hardness has significantly improved. However, when the WC content further increases more than 30%, the increase in hardness is relatively small. In addition, when the content of graphene is more than 0.3%, the branched structure became thicker, and not only the segregation of Cr, Si and W became very obvious again, but also the segregation of Fe occurred at the Ni enrichment site. The research results contribute to improving oil and gas production and operational efficiency under high-speed fluid flow conditions in the wellbore.

In this paper we explore the known connection among sustainability, resilience, and well-being within the framework of active inference. Initially, we revisit how the notions of well-being and resilience intersect within active inference before defining sustainability. We adopt a holistic concept of sustainability denoting the enduring capacity to meet needs over time without depleting crucial resources. It extends beyond material wealth to encompass community networks, labor, and knowledge. Using the Free Energy Principle, we can emphasize the role of fostering resource renewal, harmonious system-entity exchanges, and practices that encourage self-organization and resilience as pathways to achieving sustainability, both in an agent and in collectives. We start by connecting Active Inference with well-being, building on exsiting work. We then attempt to link resilience with sustainability, asserting that resilience alone is insufficient for sustainable outcomes. While crucial for absorbing shocks and stresses, resilience must be intrinsically linked with sustainability to ensure that adaptive capacities do not merely perpetuate existing vulnerabilities. Rather, it should facilitate transformative processes that address the root causes of unsustainability. Sustainability, therefore, must manifest across extended timescales and all system strata, from individual components to the broader system, to uphold ecological integrity, economic stability, and social well-being. We explain how sustainability manifests at the level of an agent, and then at the level of collectives and systems. To model and quantify the interdependencies between resources and their impact on overall system sustainability, we introduce the application of network theory and dynamical systems theory. We emphasize the optimization of precision or learning rates through the active inference framework, advocating for an approach that fosters the elastic and plastic resilience necessary for long-term sustainability and abundance.

Introduction. Anesthesia is widely used in various fields of dentistry to reduce patient discomfort when the treatment would be painful. The dentist may need to infiltrate the anesthetic into multiple locations and this is usually done with the same needle which passes through the soft tissues several times to distribute the anesthetic solution over a larger area. The present study aims to evaluate, through a morphological analysis under a scanning electron microscope (SEM), how the beveled tip of a 30G needle, used to inject anesthetic several times into different areas of the vestibular mucosa, changes. Materials and methods. 30G needles with two different brands were tested, in vivo used for a variable number of sequential injections from 1 to 6 on 192 patients. The specimens were analyzed under SEM observation to evaluate any deformations induced by contact with the vestibular soft tissues. Results. The amount of deformation, measured along the axis parallel to the needle, was proportional to the number of injections. The protrusion of deformations, measured on an axis perpendicular to the needle, were maximum on the needles used 3 times. For the needles used 4,5 and 6 injections, no further increase in deformations was noted. Conclusion. From the data it seems that the tested needles are not produced to withstand multiple injections consequently after the first injection on soft tissues, they undergo a deformation which could increase the risk of injury to the mucosa itself or to nerves and vessels with which they come into contact. It would be advisable to use the single needle for a reduced number of injections.

This article explores the cutting-edge advancement of gypsum and cement building boards infused with shape-stabilized n-octadecane, an organic phase change material (PCM). The primary focus is on improving energy efficiency and providing electromagnetic interference (EMI) shielding capabilities for contemporary buildings. The research investigates the integration of these materials into construction materials, using red-mud Carbon Foam as a stabilizer for n-octadecane (OD@CCF). Various analyses, including microstructural examination, porosity assessment, and additive dispersion, were conducted using X-ray microtomography and density measurements. Thermal conductivity measurements demonstrated the enhancement of composite boards as the OD@CCF content increased, while mechanical tests indicated an optimal additive content of up to 20%. The thermal-regulated capabilities of these advanced panels were evaluated in a custom-designed room model equipped with a homemade environmental chamber, illustrating a consistent temperature environment during heating and cooling cycles. The incorporation of OD@CCF into cement boards exhibited improved thermal energy storage properties. Moreover, the examined composite boards displayed efficient electromagnetic shielding performance within the frequency range of 3.2–7.0 GHz, achieving EMI values of approximately 18 and 19.5 dB for gypsum and cement boards, respectively, meeting the entry-level value required for commercial applications.

Quantum correlations, especially time correlations, are crucial in ghost imaging in order to significantly reduce the background noise on the one hand while increasing the imaging resolution. Moreover, the time correlations serve as a critical reference, distinguishing between signal and noise, which in turn enable clear visualization of biological samples. Quantum imaging also addresses the challenge involved in imaging delicate biological structures with minimal photon exposure and sample damage. Here we explore the recent progress in quantum correlation-based imaging, notably its impact on secure imaging and remote sensing protocols as well as on biological imaging. We also exploit the quantum characteristics of heralded single-photon sources (HSPS) combined with decoy-state methods for secure imaging. This method uses Quantum Key Distribution (QKD) principles to reduce measurement uncertainties and protect data integrity. It is highly effective in low-photon-number regimes for producing high-quality, noise-reduced images. The versatility of decoy-state methods with WCSs (WCS) is also discussed, highlighting their suitability for scenarios requiring higher photon numbers. We emphasize the dual advantages of these techniques: improving image quality through noise reduction and enhancing data security with quantum encryption, suggesting significant potential for quantum imaging in various applications, from delicate biological imaging to secure quantum communication.

The presence of potentially pathogenic bacteria on veterinary clinic surfaces may be problematic. In this study we collected swab samples (Fisherbrand, double transport swabs with Stuart’s liquid medium) and water samples from five veterinary rehabilitation clinics. Swabs and water samples were transported to a microbiology lab for processing. At the lab swabs were used to inoculated Hardy’s Cdiff Banana broth (for Clostridium difficile [Cdiff]), and five different types of bacterial growth media, including: Hardy CHROM MRSA agar (methicillin resistant Staphylococcus aureus [MRSA], and S. pseudintermedius [SIM]), Mannitol Salt Agar (S. aureus), Eosin Methylene Blue agar (enterics [ENT]), Pseudomonas Isolation agar (Pseudomonas sp.), and Tryptic Soy Agar [TSA] (non-specific). The most prominent species cultured was Cdiff (on nearly 55% of swabs). Bacillus sp. and Enterics were encountered on nearly 35% of swabs, with MRSA and SIM on just over 10% of swabs. The most contaminated sample site was harnesses/life jackets used with the underwater treadmill (33% of swabs). Underwater treadmill water had total bacterial counts from 1.6 to 2.7 e3 cfu/ml. Of all bacterial species detected SIM tends to be more pathogenic for dogs. Targeted cleaning/disinfecting in these clinics could help reduce risks for both animals and caregivers utilizing these clinics.

Introduction and Purpose: Nurses are expected to be competent in practice based on the domain of standards and interpersonal soft skills (ISS). Nurses are faced with inadequate physical assessment 28%, formulating diagnoses 56%, plans 34%, implementation 31%, evaluation 37,5%, and communication skills 41%. Aims to develop an ISS learning model based on transformative learning theory and digitalization (TLTD) to improve nurses’ competencies. Method: Used Explanatory cross-sectional involved 190 practitioner nurses. Variables of individual characters (X1), facilities (X2), Social environment support/SES (X3), TLTD (X4), ISS (X5), and nursing competencies (Y) were measured. Data was collected using a checklist questionnaire, conducted on 6 June to 10 August 2022 at Dili, Baucau, and Maliana hospitals. Used descriptive and inferential analysis with SEM-PLS. Result: Five of the 11 hypotheses of statistical p-value < 0,05 and T-Test > 1,96, including X2>X4, X3>X5, X4>X5, and X5>y, to form ISS learning model. The characteristic of respondents were 81,8% young adults, 67,9% women, 57,8% undergraduates, judging the previous training 35% was unsuccessful, and 45,8% did not meet expectations. Learning facilities that are still lacking include policies 23,7%, curriculum 23,4%, guideline 22,7%, modules 27,9%, infrastructure 20,3%, social environment support 24,2% low, organizational support, 30,0% low peer support and 26,3% low family support. The average TLTD is 25,3% to 34,2%, ISS 22,1% to 30,5%, and nurse competence 25,3% to 30,5%.Suggestion: Result of the study become base to improve nurse’s competencies. Conclusion: Learning model was formed by facilities, SES, TLTD, ISS, and nurses’ competencies.

Rationale: Genetically modified (GM) foods have the potential to reduce food insecurity and address economic and environmental issues. Despite these benefits, GM foods continue to face significant criticism and there is limited information on public awareness and understanding of their nutritional and environmental health benefits in Nigeria. This study aims to fill this gap by investigating public knowledge and perceptions of GM foods in Victoria Island, Lagos. Methods: A convenience sampling method was used to recruit 369 respondents from Victoria Island, Lagos. Data were gathered using a structured questionnaire. The target population comprised employed adults either residing or working on Victoria Island. Statistical analyses were conducted to examine the relationship between sociodemographic factors and awareness of GM foods. Results: The study found that a majority of respondents (62.9%, n=232) were knowledgeable about GM foods and their associated issues. However, many believed that their community was not well-informed on the topic. Awareness of GM foods was significantly associated with sociodemographic factors such as marital status and education (P<0.01). Most respondents were well-informed about the environmental and health benefits of GM foods, with 61.8% believing that GM food production could sustainably reduce reliance on chemical pesticides, fertilizers, and other energy inputs, thus mitigating their ecological impacts. Additionally, most respondents did not feel that purchasing or consuming GM foods conflicted with their beliefs or would affect their food choices. Conclusion: The study concludes that while individual awareness of GM foods is relatively high, there is a perception that community awareness is low. Sociodemographic factors play a significant role in shaping public awareness and perceptions of GM foods. Recommendations: This includes government should actively educate the public on the ecological and health benefits of GM foods and address any safety concerns; Implement strict border controls and food labeling for GM products to protect consumer rights and preferences for organic foods, provide sufficient technical and financial assistance to farmers who participate in organic seed programs to enhance national food security. Significant Statement: This study highlights the importance of public education on GM foods and underscores the need for government intervention to ensure informed consumer choices and support for sustainable agricultural practices.

We review the basics of nuclear binding energy scheme assumed to be associated with the existence of a new strong elementary charge associated with square root of reciprocal of the strong coupling constant.

The bioindicator potential of seagrass ecosystems in coastal trace metal monitoring is low for tropical island ecosystems. This study evaluated the bioindicator potential of six seagrass species exposed to anthropogenic trace metal pollution in the Andaman and Nicobar Islands (ANI) of India. Sediment and seagrass biomass, samples were analyzed for trace metals (Co, Cr, Cu, Fe, Mg, Mn, Ni, Pb, Zn) from four locations of ANI exposed to anthropogenic contamination. Geo accumulation Index values indicated moderate trace metal contamination in seagrass sediment. Seagrass trace metal accumulation from sediment was both species-specific and location- specific for ANI. Small seagrass species such as H. ovalis, H. beccarii and H. uninervis accumulated the maximum concentration of six trace metals (Cr, Cu, Fe, Ni, Pb, Zn) in their tissues compared to big seagrass species like T. hemprichii and E. acoroides of ANI. This study indicates leaves of small seagrass and roots of big seagrass species can serve as short- and long-term bioindicators respectively, of coastal trace metal contamination in tropical islands of ANI.

Introduction: Gastric cancer (GC) is one of the most common cancers in the world. It is a very aggressive and heterogeneous tumor. GC does not cause symptoms, so it is often diagnosed in an advanced stage and associated with poor prognosis. Despite new treatment options, it still remains a therapeutic problem. An important element determining the method of treatment of locally advanced gastric cancer (LAGC) is the assessment of lymph node metastases in preoperative and postoperative imaging and/or histopathological examination.Aim: The assessment of lymphovascular invasion (LVI) in histopathological examination in patients with LAGC after gastrectomy. The groups of patients were divided into patients who received preoperative chemotherapy, patients without preoperative chemotherapy, and all patients. Additionally, we assessed the correlation between the presence of LVI and the number of lymph nodes collected during gastrectomy.Material and method: We collected patients with histologically confirmed GC after gastrectomy. The collected samples were divided into three subgroups: patients with neoadjuvant chemotherapy (NAC), patients without NAC, and all patients. Histopathological examination assessed the presence of LVI infiltration. We then assessed the correlation between the presence of LVI and the presence of lymph node metastasis in GC. Additionally, we assessed the correlation between LVI and the number of lymph nodes evaluated in patients in each group. The statistical analyses were performed using Statistica v13.3 and Microsoft Excel 2021. The significance limit was set at p<0.05.Results:The presence of LVI strongly correlated with node involvement, and the result was statistically significant in all patients and the group of patients treated with NAC. The difference was not statistically significant in the group not treated by NAC. Additionally, we did not observe a correlation between the presence of LVI and the number of metastatic lymph nodes in GC.Summary and Conclusions: The presence of LVI in a patient with GC indicates a high probability of lymph node metastasis, which should translate into therapeutic procedures. Assessment of LVI may help identify potential patients with lymph node metastases, particularly in patients undergoing endoscopic resection without planned lymphadenectomy. It is advisable to expand research on a larger scale in order to establish clear standards in this area.

Kamchatka berries (Lonicera caerulea L.) are known for their high content of phenolic compounds or vitamins, which is reflected in their antibacterial, detoxifying and anti-inflammatory properties. They are used in the production of jams, juices, wines and as natural dye. A bioferment was prepared from the pomace of the Kamchatka berry varieties Aurora and Indigo Gem and the strains Saccharomyces cerevisiae and Lacticaseibacillus paracasei, which was used to prepare a cosmetic preparation with a concentration of 5% in accordance with the guidelines of the COSMOS certification body. Conducted physico-chemical and organoleptic analyses and bioactive profile characterisation (UHPLC-DAD and UHPLC-ESI-MS/MS). The results showed that the presence of caffeic acid 4.47 ± 0.07 mg/100g was detected after fermentation of Kamchatka berry pomace. Vitamin C content increased by 141% after fermentation of Kamchatka berry pomace. The results of stability tests showed that in the process of physicochemical analysis of cosmetic preparation with bioferment of Kamchatka berry pomace the pH should oscillate in the range of 4.38-4.76 ± 0.01. Stability tests showed that the cosmetic should be protected from high temperatures and UV radiation and proved that the product is stable under changing conditions, resulting in lower transport and storage costs.

Understanding mechanisms of ageing remains a complex challenge for biogerontologists, but recent adaptations of evolutionary ageing theories offer a compelling lens in which to view both age-related molecular and physiological deterioration. Ageing is commonly associated with a progressive loss of biochemical processes and degeneration of molecular material, however, the mechanisms of diminishing function are not simply a result of aberrant expression of these pathways. Natural selection pressures are at their highest in youthful periods to select genes advantageous to maximising reproductive capacity. After sexual maturation, selective pressure diminishes, subjecting individuals to maladaptive pleiotropic gene function once beneficial for developmental growth, but pathogenic later in life. Due to this selective ‘shadowing’ in ageing, mechanisms to counter hyperfunctional genes are unlikely to evolve within a given species. These genetic ‘run-on’ programmes are not dysfunctional per se and, in fact, remain highly robust. Thus, interventions capable of optimising gene function during the ageing process represent as attractive therapeutic modalities. Caenorhabditis elegans offers a unique model to explore high-throughput screening of interventions to combat hyperfunctional pathways involved in ageing. However, the majority of research to date employ whole-life vs late-life pathway manipulation of developmental/growth-related systems to claim ageing attenuation, despite significant impairments in early-life fitness and discordance with healthspan. Here, we discuss data supporting hyperfunctional changes at a global molecular and functional level in C. elegans, and how classical lifespan-extension mutants alter these dynamics. We later discuss the relevance of such mutant models for exploring mechanisms of ageing, highlighting that post-reproductive gene manipulation represents a far more translatable approach for C. elegans research not routed within pleiotropic constraints. More so, lifespan has become a routine readout for quantifying ‘ageing’, however, we make the argument that a compression of gerospan vs lifespan extension is a more meaningful goal for anti-ageing regimes with current knowledge. Similarly, mechanisms governing lifespan are distinct from those regulating health, and slowing senescent pathology accumulation appears more applicable for the abstraction to human ageing.

Objectives. The aim of this study was to demonstrate the ability to visualize the results of the Scilit platform's bibliometric data analysis on the topic "AI & Machine Learning" to identify publications reflecting specific issues of the topic. Data source. Bibliometric records exported from the Scilit platform on the topic "AI & Machine Learning" for the years 2021–2023 were used. For each year, 6,000 records were downloaded in CSV and RIS format. Programs and utilities used. VOSviewer, Scimago Graphica, Inkscape, FP-growth utility, GSDMM algorithm. Used services: Elicit, QuillBot, Litmaps. Results. It has been shown that bibliometric data from the open access abstract database Scilit can serve as a quality alternative to subscription-only databases. Data exported from the Scilit platform require preprocessing to make them available in a format that can be processed by programs such as VOSviewer and Scimago Graphica. The use of GSDMM and FP-growth algorithms is effective for structuring bibliometric data for further visualization. The Scimago Graphica software provides wide possibilities for building compound diagrams, in particular, for representing the network of keywords in such important coordinates for bibliometric analysis as average year of publication and average normalized citation, as well as for building an alluvial diagram of co-occurrence of more than two keywords. The possibility of using such services as elicit.com, quillbot.com and app.litmaps.com to accelerate the selection of publications on the topic under study is shown.

This study examines the aggregate consumption function of Saudi Arabia from 2000 to 2022, focusing on identifying key determinants of household consumption and evaluating the impacts of disposable income, household wealth, government expenditure, interest rates, and oil revenues. The research uses advanced econometric methods, including the Autoregressive Distributed Lag (ARDL) model and Johansen cointegration test, to analyze the relationships among these variables. The findings reveal that disposable income, household wealth, and government expenditure significantly and positively influence consumption, whereas interest rates show a negative correlation. Oil revenues also play a critical role, reflecting the country's economic reliance on oil. The study highlights the necessity for economic diversification to reduce the impact of oil price volatility on household income and consumption stability. The results offer crucial insights for policymakers, emphasizing the need for strategies that enhance household income and wealth, maintain robust public sector spending, and effectively manage interest rates. These findings also support the importance of consistent and predictable income sources for sustaining consumption. Additionally, this study suggests directions for future research, including developing sophisticated forecasting models to predict consumption trends and exploring other influencing factors such as demographic shifts and technological progress.

In a recent paper, we calculate spectral energy distributions (SEDs) for 1425 Fermi blazars, classifications of low synchrotron peak sources (LSPs) if log $\nu_{\rm p} (\rm Hz) \leq $ 14.0, intermediate synchrotron peak sources (ISPs) if $14.0 < \,\log\, \nu_{\rm p} (\rm Hz) \leq 15.3 $, and high synchrotron peak sources (HSPs) if $ \log\, \nu_{\rm p} (\rm Hz) > 15.3$ are made based on 999 logarithms of synchrotron peak frequencies with known redshift, and we obtain an empirical relation to estimate the synchrotron peak frequency, $\nu_{\rm p}^{\rm Eq.}$ from effective spectral indexes $\alpha_{ox}\, {\rm and}\, \alpha_{ro}$ as $\log \nu_{\rm p}^{\rm Eq.} = 16+4.238X $ if $X < 0$, and $\log \nu_{\rm p}^{\rm Eq.} = 16+4.005Y $ if $X > 0$, where $X = 1.0 - 1.262 \alpha_{ro} - 0.623 \alpha_{ox}$, and $Y = 1.0 + 0.034 \alpha_{ro} - 0.978 \alpha_{ox}$ \cite{Fan16}. In the present work, we investigate the correlation between the peak frequency and the radio to X-ray spectral index, that between peak luminosity (integrated luminosity) and $\gamma$-ray/optical luminosity, and that between peak luminosity and integrated luminosity. Some discussions are presented.

The olive tree (Olea europaea L.) is an evergreen tree that occupies 19% of the woody crop area and is cultivated in 67 countries on five continents. The largest olive production is concentrated in the Mediterranean basin, where the olive tree has had an enormous economic, cultural and environmental impact since the 7th century BC. In the Mediterranean region, salinity stands out as one of the main abiotic stress factors significantly affecting agricultural production. Moreover, climate change is expected to lead to increased salinisation in this region, threatening olive productivity. Salt stress causes combined damage by osmotic stress and ionic toxicity, restricting olive growth and interfering with multiple metabolic processes. A large variability in salinity tolerance among olive cultivars has been described. This paper aims to synthesize information from the published literature on olive adaptations to salt stress and its importance in salinity tolerance. The morphological, physiological, biochemical, and molecular mechanisms of olive tolerance to salt stress are reviewed.

Green economy has emerged as a significant pillar of sustainable development in the current global context, and the unpredictability of economic policy has progressively garnered the interest of businesses and government officials as one of the obstacles they must confront. This paper examines how uncertainty in the green economy impacts the green economy's efficacy. The research concentrates on how changes in a particular region can result in geospatial diffusion (spatial spillover), which is a form of spatial spillover wherein the uncertainty of the green economy can impact its efficacy. This paper examines the policy formulation and current state of the green economy across various regions, as well as the diffusion of economic policy uncertainty across geographical areas and the subsequent impact on the green economy's status quo. There is a negative correlation between economic policy uncertainty and green economy efficacy, according to research. There is a spatial spillover effect between economic policy uncertainty and the efficacy of the green economy. Regional variations exist in the impact of economic policy uncertainty on the efficacy of the green economy. The findings indicate that the implementation of AI has a more substantial beneficial effect on carbon emissions. An increase in carbon dioxide emissions poses a growing challenge for the industrial sector in its pursuit of carbon neutrality.

This study investigates the dynamic relationship between leverage and dividend policy in Nigerian manufacturing enterprises. Utilizing panel data from 26 firms between 2016 and 2020, our findings reveal that while dividend payments boost firm value, leverage typically diminishes it. Intriguingly, when leverage interacts with dividend policy, the combined effect on firm value becomes significantly positive. This observation, despite Nigeria's institutional differences from advanced economies, supports modern capital structure theories such as the pecking order and static trade-off theories. Our results suggest that for mature Nigerian companies with limited growth opportunities, high leverage and dividends effectively mitigate the "free cash flow" problem, curbing managerial tendencies to overinvest or underinvest. Thus, leverage and dividends serve as complementary mechanisms for monitoring and controlling managerial discretion. Consequently, firms with high leverage ratios can leverage dividend policies as disciplinary tools, and vice versa. This underscores the necessity for Nigerian manufacturing firms to carefully balance debt and equity to sustain market confidence and investment potential.

Active front-end (AFE) rectifiers have been becoming widely employed in power systems to achieve unity power factor and harmonic mitigations. The typical modeling approaches applied for AFE rectifiers in the literature mostly relied on two baselines named the detailed model and the time average model. The former approach deals with the switching element model (SEM) leads to significant harmonics in currents with distorted waveforms. The latter approach uses the average-value model (AVM) to overcome the currents’ harmonics as well as provide fast responses. However, even the AVM baseline has contained problems during the starting stage (lack of control signals) and over the dead-time periods which causes serious issues in the implementation process. This paper presents an improved dynamic AVM for AFE rectifiers by precisely considering the issues mentioned above along with the practical starting procedure and desirable initialization. The studied AFE rectifier is developed using the voltage-oriented control (VOC) technique based on the different modeling methodologies including SEM, Conventional AVM, and the proposed AVM. The performance of all models is analyzed and compared using simulation results with MATLAB/Simulink R2023a Function blocks for all the algorithm parts and SimScape elements for the electrical circuit model. The simulation results illustrate that the performance of the proposed AVM approach can closely resemble the behavior of the SEM baseline with low harmonic distortion.

In the decarbonization of the steel, cement, and chemical industry in Germany, green hydrogen is expected to play a crucial role. The utilization of green hydrogen in the production processes of said industries requires organizations to modify their business model, requiring sustainable business model innovation (SBMI). Numerous tools and frameworks that support organizations in the process of SBMI have been proposed in the literature in recent years. However, the applicability of these tools and frameworks for steel, cement, and chemical companies that intend to utilize green hydrogen to produce their goods remains unexplored. By conducting a systematic literature review on tools and frameworks for SBMI, a literature and practice review to identify and analyze existing green hydrogen projects of steel, cement, and chemical companies, and an evaluation of the identified tools and frameworks in an evaluation matrix, this paper aims to assess the suitability of SBMI tools and frameworks for steel, cement, and chemical companies that plan to use green hydrogen to produce their goods. Based on the evaluation, the Cambridge Business Model Innovation Process (CBMIP) was identified as the most suitable SBMI framework.

Background: Autonomic balance measurement (ABM) is a valuable tool in clinical practice for assessing the functioning of the autonomic nervous system (ANS), which controls involuntary bodily functions. Here we summarize the current understanding of the utility of autonomic balance measurement in clinical practice. Methods: A narrative review of relevant literature was conducted, focusing on studies investigating the use of autonomic balance measures in various clinical settings. Results: ABM holds potential benefits in clinical practice, including aiding in diagnosing autonomic dysfunction, monitoring treatment efficacy, and predicting potential health complications. ABM can be crucial for diagnosing various conditions, including cardiovascular diseases (Heart failure, arrhythmias, and hypertension), neurological disorders (Parkinson's disease, Alzheimer's disease, and diabetic neuropathy), in sports medicine athletes can undergo ABM to optimize training regimens, enhance performance, assessing the impact of training stress, preventing overtraining, and promoting overall well-being and probably to assess potential health risks, in metabolic syndromes ABM can aid in the early detection of autonomic neuropathy, a diabetes-related complication, allowing for timely intervention and better management of the disease, and psychiatric disorders (Anxiety, depression, and post-traumatic stress disorder). In addition, ABM can be helpful in monitoring of treatment efficacy, by tracking changes in autonomic balance, clinicians can assess if treatments for conditions impacting the autonomic nervous system are effective. ABM can also be helpful in predicting outcomes by facilitating early recognition of future health complications in certain populations. However, limitations exist, including non-specificity, variability in measurements, and limited evidence for routine use in specific clinical settings. Conclusion: Incorporating autonomic balance measurement into routine clinical assessments provides a more comprehensive understanding of a patient's health. It complements traditional diagnostic methods, offering additional insights into the body's regulatory mechanisms. While autonomic balance measurement offers potential benefits, careful interpretation and consideration of its limitations are crucial for its effective use in clinical practice. ABM remains a valuable and versatile tool in clinical practice for a deeper understanding of the autonomic nervous system, enabling early detection, targeted interventions, and improved management of various medical conditions across different specialties.

Energy from biogas is one of the most promising renewable energy sources. Significant, for technical, economic, and environmental reasons, is the construction of agricultural microgas plants next to households specialising in cattle rearing. The availability of free substrate makes it possible not only to produce one's electricity and heat but also to produce a more environmentally and human-friendly manure. The operation of biogas plants is, unfortunately, associated with technical problems. This paper presents the results of a study of the quality of electricity generated in an agricultural biogas plant built at a farm specialising in dairy cows, where the owner reported a problem with the voltage in the power supply network. Therefore, selected power quality parameters occurring at the connection point of the biogas plant were analysed in detail. As the authors' research showed, in the case in question, the agricultural biogas plant was connected via a cable with too small a conductor cross-section, which resulted in significant voltage exceedances, making it impossible to switch on the second of the biogas plant's generators. Replacement of the feed-in cable has enabled both generators to run, but significant fluctuations in the feed-in voltage values were still noticeable. Analysis of the subsequent measurements revealed the need for changes in the design of the digester itself. The proposal for change is to replace the two current digester mixers (each rated at 9 kW) with more mixers of lower power. The new mixers would operate in an alternating system, where only one would always be activated.

This study focuses on examining various approaches for Tensor Decompositions (TDs) and their potential applications in satellite imaging (SI) and deep learning (DL). The research highlights how these decompositions can contribute to the advancement of SI and DL, providing valuable insights for future utilization of TDs in research. It explores how these techniques contribute to the advancement of SI and DL methods, providing insights into their potential applications and suggesting future research directions. The study aims to enhance the use of TDs techniques to further advance research efforts in these fields. More importantly, the current investigation offers a thorough analysis of the potential advantages and reasons for employing TDs techniques in different domains, including satellite imaging and deep learning. The aim is to enhance research outcomes by utilizing TDs. The review also identifies unresolved issues and proposes future directions for further investigation in this field. Fundamentally, these proposed open problems will open new grounds to the research community to articulate, innovate, and provide more real-life applications to improve the current state of the art by delving into a wider vision for a higher-level performance of both satellite imaging (SI) and deep learning (DL). Looking at the bigger scenario, this also suggests that TDs could be potentially employed to revolutionize existing machine learning technologies as well as the current space AI industry.

Starting from the model of a slow-rolling missile with six degrees of freedom (6 DOF) in the body frame, a 6 DOF model in the Resal frame is obtained, which is used to linearize the coupled commanded motion. Based on the linearized model, we obtain the structural scheme of the commanded object and define the quality parameters. The obtained parameters have a complex representation (with real and imaginary parts) due to the coupling between longitudinal channels. Then, the kinematic guidance equations, the seeker equations and the actuator specific to the slow-rolling single-channel missile are defined using a switching function. The guidance kinematic equations, the seeker equations and the actuator model are linearized in the Resal frame, and the structural diagram of the homing missile is constructed. Starting from this, the characteristic polynomial having complex coefficients is determined and then analyzed with the Frank-Wall stability criterion. Based on the analysis, a stability range is determined for the navigation constant and a minimum and possibly a maximum limit for the time to hit the target is obtained. The stability range defined for the navigation constant on the linear model is finally validated on the nonlinear model in the body frame.

This review provides a comprehensive and updated information on chalcones, presenting their sources, methods of identification and properties putting emphasis on applications in agricultural industry. Vast exploitation of synthetic pesticides led to the weed and pest resistance issue, causing economic loss but more importantly health risk due to pesticide overuse. Because one of the aim of the European Green Deal 2030 is the Farm to Fork strategy which targets on reducing by 50% the use of chemical pesticides by 2030, and push towards natural pesticides which are more environmentally friendly and restore natural resources, chalcones and their derivatives seem to fit perfectly. They have herbicidal, fungicidal, bactericidal and antiviral properties. Moreover, chalcones are naturally occurring substances, known for their favorable health effect for years, working on many areas. This review is complementary to the previous ones describing chalcones use in agriculture, updates them but additionally shows methods of detection.

The escalating demand for multifunctional and advanced materials for growing industries has turned scientific exploration to graphene-based hybrid filler polymer composites. The introduction of graphene with other fillers into polymer matrices results in astonishing properties and thus has gained significant attention in recent years. This study addresses the significance of graphene-based hybrid filler polymer composites in progressive materials science and engineering. The paper encloses some traditional and current preparation techniques employed in the fabrication of composites and a comprehensive review of successfully prepared graphene hybrid polymer composites with enhanced mechanical, thermal, and electrical properties reported in published research. The role of different factors, e.g., filler type, aspect ratios, filler-matrix compatibility, dispersion effects, homogeneity, filler orientation through polymer matrices, and curing conditions, are summarized. Finally, the applications in heavy industries, e.g., aerospace, electronics, energy storage, and automotive sectors were also analyzed. We hope this study will serve as a practical resource for new researchers and practitioners to understand and harness the full potential of these composites in various scientific and industrial fields.

In this paper, a novel microwave catalyst Ni@SiC/CNFs (NSC), C/Ni (NC), and C/SiC (SC) were successfully synthesized by electrostatic spinning method, and proved to degrade methylene blue with high efficiency under microwave irradiation. The results imply that the catalyst Ni@SiC/CNFs with double shell structure gave a 99.99 % removal rate in 90 s for the degradation of methylene blue under microwave irradiation, outperformed the C/Ni and C/SiC and most other reported catalysts in similar studies. On the one hand, the possible mechanism of the methylene blue degradation should be ascribed to that double shell structure increases the polarization source of the material, resulting in excellent microwave absorption properties; and on the other, the in-situ generation of active species OH• and O2 - under microwave radiation and the synergistic coupling effect of metal plasma greatly improved the degradation efficiency of methylene blue. The findings of this study could provide a valuable reference for the green degradation of industrial dye wastewater and its sustainable development process.

We propose and experimentally realize a scheme of the optical nonreciprocity (ONR) using degenerate two-level atoms embedded in an optical ring cavity. For the degenerate transition Fg=4→Fe=3, we first study the cavity-transmission property in different coupling field, and verify that within the strong-coupling regime, the single-dark-state peak formed by electromagnetically induced transparency (EIT) shows ONR. Qualitative theoretical analysis shows that the stable ground-state Zeeman coherence is necessary for intracavity EIT. However, due to the frequency degeneracy, the large Rabi frequency of counter-propagating coupling field can reduce the number of effective atoms and weaken the strong-coupling of the atom-cavity, which determines that ONR based on intracavity EIT occurs only at weaker probe intensity. Furthermore, the ONR transmission with high contrast, linewidth-narrowed and broadband is experimentally demonstrated.

Abstract: Since the establishment of multiparty democracy in the 1990s, Malawi has experienced significant political shifts, with elections playing a crucial role in shaping the political landscape. However, there is a lack of comprehensive understanding of the spatio-temporal dynamics of election results, especially regarding voting patterns and their effects on electoral outcomes. This gap hinders political parties, politicians, and electoral stakeholders in effectively managing regional and temporal changes in voting behaviors. Geographic Information Systems (GIS) are underutilized in Malawi for studying geo-graphical and temporal election data. This study utilized GIS to analyze the spatial pat-terns of election results in Malawi since the advent of multiparty democracy. By collecting geographic data on election outcomes, including vote counts, candidate performance, voter turnout, and other relevant data, the study examined how the geographic distribution of votes impacts electoral results. GIS techniques such as spatial analysis, mapping, and spatial statistics were employed to assess the data and create maps illustrating spatial patterns in Malawi's election outcomes. The study revealed that voting patterns in Malawi are significantly influenced by regional lines. These insights can inform political campaigns, voter mobilization efforts, and strategies for electoral reform.

In this study, we present comprehensive climatologies of effective ultraviolet (UV) quantities and photosynthetically active radiation (PAR) over Cyprus for the period 2004 to 2023, leveraging the synergy of earth observation (EO) data and radiative transfer model simulations. The EO dataset, encompassing satellite and re-analysis data for aerosols, total ozone column, and water vapor, alongside cloud modification factors, to capture the nuanced dynamics of Cyprus's atmospheric conditions. With a temporal resolution of 15 minutes and a spatial of 0.05°x0.05°, these climatologies undergo rigorous validation against established satellite datasets and are further evaluated through comparisons with ground-based global horizontal irradiance measurements provided by the Meteorological Office of Cyprus. This dual-method validation approach not only underscores the models' accuracy but also highlights their proficiency in capturing intra-daily cloud coverage variations. Our analysis extends to investigating the long-term trends of these solar radiation quantities, examining their interplay with changes in cloud attenuation, aerosol optical depth (AOD), and total ozone column (TOC). Significant decreasing trends in the noon ultraviolet index (UVI), of -2 to -4% per decade have been found in Autumn, especially marked on the island’s Northeastern part, mainly originating from the (significant) positive trends in TOC. The significant decreasing trends in TOC, of -2 to -3% per decade that were found in Spring do not result in correspondingly significant positive trends in the noon UVI since variations in cloudiness and aerosols also have a strong impact on the UVI in this season. The seasonal trends in the Daylight Integral (DLI) were generally not significant. These insights provide a valuable foundation for further studies aimed at developing public health strategies and enhancing agricultural productivity, highlighting the critical importance of accurate and high-resolution climatological data.

An active power dispatch method for a microgrid (MG) with multi-type loads, renewable energy sources (RESs) and distributed energy storage devices (DESDs) is the focus of this paper. The MG operates in a grid-connected model, and distributed power sources contribute to the service for load demands. The outputs of multiple DESDs are controlled to optimize the active power dispatch. Our goal with optimization is to reduce the economic cost under time-of-use (TOU) price, and to adjust the excessively high or low load rate of distributed transformers (DTs) caused by the peak-valley demand and load uncertainties. To simulate a practical environment, the stochastic characteristics of multi-type loads are formulated. The transition matrix of system state is provided. Then, a finite-horizon Markov decision process (FHMDP) model is established to describe the dispatch optimization problem. A learning-based technique is adopted to search the optimal joint control policy of multiple DESDs. Finally, simulation experiments are performed to validate the effectiveness of the proposed method, and the fuzzification analysis of the method is presented.

Hox gene clusters are crucial in Embryogenesis. It was observed that some Hox genes are located in order along the telomeric to centromeric direction of the DNA sequence: Hox1, Hox2, Hox3…. These genes are expressed in the same order in the ontogenetic units of the Drosophila embryo along the Anterior-Posterior axis. The two entities (genome and embryo) differ significantly in linear size and in-between distance. This strange phenomenon was named Spatial Collinearity (SP). Later, it was observed that, particularly in the Vertebrates, a Temporal Collinearity (TC) coexists: first is Hox1 expressed, later Hox2 and even later Hox3,…,. According to a Biophysical Model (BM), pulling forces act at the anterior end of the cluster while a cluster fastening applies at the posterior end. Hox clusters are irreversibly elongated along the force direction. During Evolution, the elongated Hox clusters are broken at variable lengths thus split clusters may be created. An Empirical Rule was formulated distinguishing development due to a complete Hox cluster from development due to split Hox clusters. BM can ‘explain’ this Empirical Rule. In a spontaneous mutation where the cluster fastening is dismantled, a weak pulling force automatically shifts the cluster inside the Hox activation domain. This cluster translocation can probably explain the absence of Temporal Collinearity in Drosophila.

Actually, the study aimed to manage and to analyse the results of the laboratory methods, using liver samples, preparing and analizing in pathology service. This mentioned, are known as routinally practice for hepatitis C diagnosis, which conduct to hepatic cirrhosis. In this study direction, chronic liver diseases stimulate a degree of hepatocyte injury. So previously mentioned modifications, alters thet affect the liver architecture and finally ends in cirrhosis are well analyse on microscopic preparates. Folowing morphological steps, it is possible to analyse normal and alterate liver structure, on colored preparates.

Retinal vein cannulation involves puncturing an occluded vessel on the micron scale. Even single millinewton force can cause permanent damage. An ophthalmic robot with a piezo-driven injector is precious enough to perform this delicate procedure, but the uncertain viscoelastic characteristics of the vessel makes it difficult to achieve the desired contact force without harming the retina. The paper utilizes a viscoelastic contact model to explain the mechanical characteristics of retinal blood vessels in order to tackle this issue. The uncertainty in the viscoelastic properties is considered an internal disturbance of the contact model, and an active disturbance rejection controller is then proposed to precisely control the contact force. The experimental results show that this method can precisely adjust the contact force at the millinewton level even when the viscoelastic parameters vary significantly (up to 403.8%). The root mean square (RMS) and maximum value of steady-state error are 0.32 mN and 0.41 mN. The response time below 2.51 s with no obvious overshoot.

Permafrost covers about 23% ~ 25% of the land in the northern hemisphere, mainly in Russia, Canada, Alaska, Northeast and Qinghai Tibet Plateau (QTP) in China. Many engineering especially the transportation has been in the permafrost regions above. Under the action of highways construction and global warming, permafrost under infrastructures is degraded and causes serious damage. Two phases closed thermosyphon (TPCT) is a widely accepted green countermeasure against the problem in permafrost regions. Although it has been applied to prevent permafrost degradation, their application presents significant challenges on account of the stronger endothermic action of asphalt pavement. This paper focused on the thermosyphon technology and application in the permafrost. Moreover, the article highlighted the excellent working performance of the TPCT that improving the stability of the infrastructures and prevent it degrading due its excellent efficiency of heat transfer. The industrial applications of the TPCT were also summarized, along with their limitations. Finally, the results reported in this paper can provide a valuable guidance for the design of the TPCT and construction of the permafrost regions in the future.

1) Background: Several studies have shown the benefit of drawing when learning anatomy. Virtual Reality (VR) also appears to be useful to increase the understanding of the location of anatomical structures. This study aims to describe how students in an Operating Room Nursing (OR nursing) master study program perceive the benefit of active learning methods, including drawing and the use of VR. 2) Methods: We combined these two methods in a class of 29 students. 38 half-finished drawings of anatomical structures were made. The students were to complete these during lectures with guidance from the teacher. The students also attended a two-hour VR session where they were to find various anatomical structures. A paper questionnaire was applied to evaluate the teaching program. Data were analyzed statistically. 3) Results: The students highly appreciated these learning methods. They reported that drawing made them work more actively during lectures and increased their learning outcome. They also perceived that the use of VR technology increased their understanding of the location of anatomical structures. 4) Conclusion: The combination of drawing and VR technology may be of benefit to OR Nursing students when learning anatomy by both increasing student activity and learning outcomes.

In contemporary construction, the prevalence of vibration serviceability issues in lightweight and slender structures has become increasingly common, owing to advancements in building materials and construction methods. While these structures often meet the criteria for ultimate limit states, they can still elicit complaints due to excessive vibrations induced by human activity. To address this challenge, the Integral Resonant Control (IRC) technique has emerged as a favored approach for actively damping vibrations in various systems. This study introduces a fresh perspective on implementing a multi-input multi-output (MIMO) IRC scheme for active vibration control (AVC) specifically tailored for pedestrian structures utilizing inertial mass actuators. Building upon a common framework and design methodology outlined in previous research, this work presents a novel application of MIMO IRC for AVC. The designed controller is rigorously tested and implemented on a laboratory floor structure to validate its efficacy.

Climate change, increasing global food needs, and decreasing global resources brought a new era to human every-day live with a strong turn to circular economy and sustainability. Food packaging and preservation is an important global sector where enchanced research is carried out. New methods such as active packaging and chemical preservatives replacement are of major interest. Many researchers were published studies about active packaging films, replacement of chemical preservatives with natural originated extracts, and novel incorporation procedures. Sequentially to our and other scientists’ previous work, in this paper we present the results of the improvement which was achieved by incorporating the developed nanohybrid of natural-halloysite/carvacrol-extract, the pure natural carvacrol extract and the commonly used low-density-polyethylene. The well known corona-treatment procedure was employed to produced the optimum final film and the results shown that the low-density-polyethylene incorporated with natural-halloysite/carvacrol-extract nanohybrid and coated external with extra carvacrol extract exhibited aproximatelly 100% higher Young-Modulus values, slightly decreased ultimate strength by 20%, and almost stable elonation at break properties. The water-vapor and oxygen barrier increased by 40%. Finally, the antioxidant activity of the corrona-treated film increased by 28% compared to the similar but untreated product because of the lower release rate of the carvacrol.

Pathogenicity of many bacteria including Bacillus cereus and Staphylococcus aureus depends on pore-forming toxins (PFTs), which cause lysis of host cells by forming pores in membranes of eukaryotic cells. Bioinformatic analysis revealed in over 600 PFTs a region homologous to the Lys171-Gly250 sequence in hemolysin II (HlyII) from B. cereus, which we designated as “homologous peptide”. Three β-barrel PFTs were used for a detailed comparative analysis. Two of them –HlyII and cytotoxin K2 (CytK2), – are synthesized in Bacillus cereus sensu lato; the third – S. aureus α-toxin (Hla) – is the most investigated representative of the family. Protein modeling showed certain amino acids of homologous peptide to be located on the surface of the monomeric forms of these β-barrel PFTs. We obtained monoclonal antibodies against both a cloned homologous peptide and a 14-membered synthetic peptide DSFNTFYGNQLFMK as part of homologous peptide. The HlyII, CytK2 and Hla regions recognized by the obtained antibodies, as well as an antibody capable of suppressing the hemolytic activity of CytK2, were identified in the course of the work. Antibodies capable of recognizing PFTs of various origins can be useful tools for both identification and suppression of the cytolytic activity of PFTs.

Azobenzene photoswitches are fundamental components in contemporary approaches aimed at light-driven control of intelligent materials. Significant endeavors are directed towards enhancing the light-triggered reactivity of azobenzenes for such applications and obtaining water-soluble molecules able to act as crosslinkers in a hydrogel. Here, we report the rational design and the synthesis of azobenzene/alginate photoresponsive hydrogels endowed with fast reversible sol-gel transition. We started with the synthesis of three cationic azobenzenes (AZO A, B, and C) and then incorporated them in sodium alginate (SA) to obtain photoresponsive supramolecular hydrogels (SMHGs). The photoresponsive properties of the azobenzenes were investigated by UV-Vis and ¹H NMR spectroscopy. Upon irradiation with 365 nm UV light, the azobenzenes demonstrated efficient trans-to-cis isomerization, with complete isomerization occurring within seconds. The return to the trans form took several hours, with AZO C exhibiting the fastest return, possibly due to higher trans isomer stability. In the photoresponsive SMHGs, the minimum gelation concentration (MGC) of azobenzenes was determined for different compositions, indicating that small amounts of azobenzenes could induce gel formation, particularly in 5 wt% SA. Upon exposure to 365 nm UV light, the SMHGs exhibited reversible gel-sol transitions, underscoring their photoresponsive nature. This research offers valuable insights into the synthesis and photoresponsive properties of cationic, water-soluble azobenzenes, as well as their potential application in the development of photoresponsive hydrogels.

To understand the mystery of final unification, in our earlier publications, we proposed two bold concepts: 1) There exist three atomic gravitational constants associated with electroweak, strong and electromagnetic interactions. 2) There exists a strong elementary charge in such a way that its squared ratio with normal elementary charge is close to reciprocal of the strong coupling constant. In this paper we propose that, can be considered as a compound physical constant associated with proton mass, electron mass and the three atomic gravitational constants. With these ideas, an attempt is made to understand nuclear stability and binding energy. In this new approach, nuclear binding energy can be fitted with four simple terms having one unique energy coefficient with a formula, where is an estimated mean stable mass number. With this new approach, Newtonian gravitational constant can be estimated in a verifiable approach with a model relation of the form, where is the Fine structure constant. Estimated and is 62 ppm higher than the CODATA recommended It needs further investigation. Proceeding further, an attempt is made to fit the recommended quark masses.

The uncertainty in the secondary path of an Active Noise Control (ANC) headphone affects the waterbed effect and stability of the feedback system. This study focuses on the uncertainty of the secondary path when real users wear headphones, and proposes a new uncertainty constraint based on the measured results of the secondary path transfer function under different wearing conditions of dummy head and limited subjects. This constraint and a cascaded second-order infinite impulse response filter with fixed coefficients are used to formulate a control strategic function, which is optimized by the Improved Grey Wolf Optimizer (IGWO) algorithm to obtain the optimal controller with better noise reduction performance. The proposed method and simulation model are validated based on the experimental test results. The results demonstrate that the safety factor and waterbed suppressing factor contained in the proposed uncertainty constraint ensures more stable noise reduction and effective suppression of the waterbed effect for new subjects without a priori data.

Abstract Introduction: Poor structural quality of health facilities for tuberculosis (TB) diagnosis and treatment contributes to unfavorable health outcomes among TB patients. Improving the quality of healthcare services helps to avert TB-related morbidity. Despite these facts, the level of structural quality of health facilitieSs to deliver TB services is not in line with what the national TB and leprosy program (NTLP) recommends. Hence, the present study was conducted to assess the structural quality of health facilities to deliver quality TB services to TB patients among public health facilities in the Sidama region.Objectives: To determine the quality of the structural domain of TB services at public health facilities in the Sidama region of southern Ethiopia.Methods: An institution-based cross-sectional study was conducted from June to July 2023 among randomly selected public health facilities in the Sidama region. We included 40 randomly selected public health facilities that delivered TB services in the study area. Data was collected by experienced data collectors using facility audits, clinical observation checklists, structured questionnaires, and in-depth interviews. An Open Kit Mobile (ODK) application was used to collect data and exported to SPSS version 26. All statistical analysis was done using SPSS version 26.Results: The overall mean quality score for the structural dimension was 50.25 among the 40 health facilities audited in the study area.Conclusion: The quality of TB services regarding structural dimensions was poor in the study area. Therefore, any strategies must give careful attention to increasing the comprehensive structural dimension of quality TB services.

Thyroid hormones are essential for regulating the metabolic rate, growth, development, and maintenance of many physiological processes in vertebrates. They are synthesized by the thyroid gland, which is an ancient organ that evolved early in vertebrate evolution. This study aims to characterize the evolutionary path of polymorphic variants associated with the hypothalamus-pituitary-thyroid (HPT) axis by comparing ancient DNA (aDNA) sequences of Late Pleistocene-Holocene hominin populations with those of modern humans. We evaluated the genetic sequences of several populations, including Neanderthals, Denisovans, Palaeolithic hunter-gatherers from European Russia and Sunghir, and Neolithic hunter-gatherers/farmers from Anatolia focusing on genes involved in the development of the thyroid gland and thyroid hormone (TH) biosynthesis, secretion, and transport. Results showed interesting variants in the DIO2 (rs225014), TPO (rs4927611), and TG (rs2069556 and rs1133076) genes. All SNPs seemed to confirm that Neanderthals, and in part Denisovas, were physiologically hypothyroidic. Probably they had lower T3 levels due to defective production or peripheral conversion. From the moment that the most favourable alleles in terms of T3 production appear during the Paleolithic, we are inclined to assume that their selection was linked to environmental pressure.Our study supports insight into the evolutionary history of the endocrine system and can help in providing understanding into the evolution of physiological systems and their adaptation to changing environments. Understanding the evolution of thyroid hormones can also shed light on the mechanisms underlying thyroid disorders in humans.

The current trend in supply chain development requires the application of new knowledge to meet the challenges posed by new technologies. One such technology is blockchain, which facilitates supply chain solutions through the use of innovative data transfer, storage and verification systems. However, the use of blockchain can be challenging for certain stakeholders, such as small carriers, who may lack the necessary technical expertise or access to the technology. In this paper, we explore the potential for engaging small carriers that provide services within the blockchain supply chain but face technological barriers. We identify the barriers and opportunities for these carriers to participate, focusing on a case study of a small carrier that transports temperature-sensitive cargo. In addition, we introduce in-vehicle temperature measurement for use in cold chains and propose an ecosystem that can benefit different stakeholder groups.

Open source software such as OpenDSS has given a lot of help to distribution network researchers and educators. With high penetration of distributed renewable energy resources into distribution network, tradition distribution steady state analysis software such as OpenDSS is faced with difficulty in handling distributed generators. Three-phase distributed generators are often modeled in sequence frame while unbalanced distribution network are usually modeled in phase frame. So a load flow in sequence-phase coupled frame is proposed to handle models described in both frames. Voltage controlled DGs which are difficult to cope with in OpenDSS are handled in proposed program. The steady state analysis platform is programmed with open source Modelica language and the main aim of this paper is to introduce an open source platform for active distribution network steady analysis include load flow and short circuit analysis which can be easily adopted and improved by other educators and researchers.

Strong-aroma Baijiu is a traditional Chinese spirit distilled from grains that undergo solid-state fermentation. At the end of each fermentation cycle, a significant quantity of Huangshui accumulates at the bottom of the fermentation pit, constituting one of the primary by-products in the brewing process of strong-flavor liquor. In this report, the chemical component analysis of Huangshui obtained from a strong-flavor liquor factory revealed a diverse array of organic acids, alcohols, esters, starch, reducing sugars, amino acids, and other compounds present in Huangshui. Additionally, two specialized solid-state fermentation models were developed to investigate the formation process of Huangshui. Our findings demonstrate a positive correlation between the yield of Huangshui and the initial moisture content of fermented grains. It is concluded that Huangshui is the percolate produced during the solid-state brewing process of strong-flavor liquor, with its water content originating from the initial moisture of fermented grains.

BackgroundLiving donor liver transplantation offers comparable long-term results to cadaveric donor transplantation. This study analyzes the selection process of living liver donors at a Western transplant center that utilizes both donation forms. MethodsThis retrospective analysis examined potential living donors, collecting medical data and reasons for refusal, and divided patients by indication and urgency for transplantation. ResultsFrom January 2013 to December 2023, 594 potential living donors were assessed at Jena University Hospital. Of these, 124 living donor transplants were performed. During outpatient evaluation, 357 potential donors were excluded. Subsequently, 238 individuals underwent inpatient assessment, with 100 more being excluded. Main reasons for donor refusal included medical or psychological issues (n=160), disease progression in recipients (n=90), and recipient refusal or donor withdrawal (n=54). The evaluation process showed a trend towards considering more distant relatives and acquaintances as donor candidates with increasing severity of the recipient's disease.

Improving the level of farmers' participation in collective action is an important way to promote rural revitalization and improve the sustainable livelihood level of farmers in underdeveloped areas. Based on 312 questionnaires of farmers in Shanxi Province, this paper investigates the status of farmers' participation in collective action, their sustainable livelihood level and the sustainable livelihood effect of collective action participation. The results show that: farmers' willingness to participate in collective action is strong, and the participation effect is obvious, but the participation frequency is low, and the participation time is less; The farmers' sustainable livelihood level is relatively low, Empirical research shows that the level of collective action participation will have a significant positive impact on Farmers' livelihood risk prevention, livelihood capital accumulation, livelihood mode selection and livelihood income improvement, and the frequency, time and value perception of participation in collective action will have varying degrees of impact on Farmers' sustainable livelihoods. In order to promote farmers' active participation in collective action, it is proposed to strengthen the construction of collective organizations Provide incentives and improve the quality and skills of farmers to enhance the collective concept and other policy recommendations.

Aquifer karstic structures, due to their complex nature, present significant challenges in accurately mapping their intricate features. Traditional methods often rely on invasive techniques or sophisticated equipment, limiting accessibility and feasibility. In this paper, we propose a new approach to non-invasive, low-cost 3D reconstruction using a camera that observes the light projection of a simple diving lamp. Our method capitalizes on the principles of structured light, leveraging the projection of light contours onto the karstic surfaces. By capturing the resultant light patterns with a camera, we reconstruct three-dimensional representations of the structures. The simplicity and portability of the equipment required make this method highly versatile, enabling deployment in diverse underwater environments. We validate our approach through extensive field experiments conducted in various aquifer karstic settings. The results demonstrate the efficacy of our method in accurately delineating intricate karstic features with remarkable detail and resolution. Furthermore, the non-destructive nature of this technique minimizes disturbance to delicate aquatic ecosystems while providing valuable insights into the subterranean landscape. This innovative methodology not only offers a cost-effective and non-invasive means of mapping aquifer karstic structures but also opens avenues for comprehensive environmental monitoring and resource management. Its potential applications span hydrogeological studies, environmental conservation efforts, and sustainable water resource management in karstic terrains worldwide.

During public health events, Active Mobility (walking and cycling) plays an important role in securing residents' travel. To enhance the resilience of urban transportation, this article integrates the travel environment elements for walking and cycling and constructs a travel environment for Active Mobility evaluation index system. This article uses survey data from the main urban area of Harbin in the context of the COVID-19 pandemic in May 2022, and combines the Gradient Boosting Decision Tree (GBDT) and Impact-Asymmetry Analysis (IAA) methods to analyze the satisfaction of the travel environment for Active Mobility. It proposes strategies for optimizing the travel environment for Active Mobility, ensuring residents' travel during public health events, guiding them to adopt Active Mobility, and improving urban transportation resilience. This research shows that Active Mobility can enhance urban transportation resilience. In addition, there are differences in resident demand for walking and cycling environments in the travel environment for Active Mobility. Residents are more concerned about the comfort of the walking environment, while they prioritize the convenience of the cycling environment.

Today, enhancing food preservation and safety in the spirit of the bioeconomy suggests the use of biodegradable polymers such as poly-L-lactic acid (PLA) in food packaging and the replacement of chemical additives with natural antioxidant/antibacterial agents such as essential oils and their derivatives. Herein a novel carvacrol (CV) @ natural zeolite (NZ) nanohybrid was developed by employing a new vacuum adsorption desorption method which results in the adsorption of a high CV amount on NZ equal to 61.7 %wt. This CV@NZ nanohybrid was successfully dispersed in a PLA/triethyl citrate (TEC) matrix via a melt-extrusion process to obtain PLA/TEC/xCV@NZ nanocomposite films with 5, 10 and 15 CV@NZ %wt. content. PLA/TEC/xNZ films were also de-veloped for comparison. The overall study resulted in a biodegradable active film with the fol-lowing properties: 10%wt. CV@NZ content (PLA/TEC/10CV@NZ), self-healable properties, 22% higher tensile strength and 40% higher elongation at break, 45% higher water barrier and 40% higher oxygen barrier than pure PLA/TEC matrix. This film also provides high CV release content, high CV control release rate as well as significant antioxidant activity and antibacterial activity against the food pathogens Staphylococcus aureus and Salmonella enterica spp. enterica serovar Typhimurium. This film not only succeeds in extending the shelf-life of fresh pork minced, as shown by total variable count measurements in four days, but also prevents lipid oxidation of fresh minced pork and maintains the minced meat in higher nutritional conditions, as revealed by the heme iron content determination, and in a much better and acceptable sensory condition than the commercial packaging paper.

Abstract—Hydraulic switching actuators are high efficiency, fast response, and low cost solutions for hydraulic control systems. One of the challenging problems is throttling losses during valve transitions. Previously the authors proposed a zero-flowrate switching method to reduce throttling energy loss of the switching valve, where a hydraulic resonator is applied to make the flowrates through the lines approaching zero before the valves are switched off. The major challenge of this approach is fast switching valves whose transition times are less than 2 ms. In this paper, an improved zero-flowrate switching method is presented. It utilizes the capacity with independent inlet/outlet ports to regulate flowrates through the lines. Models of capacity applied in a simple line with different pressure signals are developed to explore characteristics of the capacity, based on which a complete actuation system is developed. In the complete model, resistance and inductance are optimized to achieve desired flowrate response. The improved zero-flowrate switching method reduces throttling energy losses by 99.945% compared to a hard switching system. The simulation results demonstrated that the improved zero-flowrate switching method performs as expected in the design condition. A capacity with proper volume is able to regulate flowrates through all the lines to zero, with the help of appropriate resistance and inductance. Compared to previous zero-flowrate switching method, the novel strategy allows slower switching valves applied in hydraulic actuation systems and achieves better efficiency performance. This research paves a new avenue for reducing throttling energy losses and improves system efficiency in hydraulic switching actuators, as well as most of the hydraulic switch-mode circuits.

Background: As the most invasive breast cancer (BrCa), triple-negative BrCa (TNBC) has the worst survival. The use of dexmedetomidine potentially affected BrCa surgery and dexmedetomidine was reported to have direct effects on TNBC cells. The objective of this study is to explore the mechanisms underlying the effect of dexmedetomidine on TNBC. Methods: Dexmedetomidine targets were predicted using The Cancer Genome Atlas data SwissTargetPrediction. Cell lines MDA-MB-231, MCF7, and MCF10A were used to validate the targets in TNBC with both clinical samples and cell lines. Cancer cell lines and normal breast cell lines were grouped in cancer and normal groups respectively. Both groups were exposed to dexmedetomidine treatment. Cell Counting Kit-8 was used to determine the effect of dexmedetomidine on cells with target silencing. The binding model of the candidate targets was docked and critical amino acids were mutated to validate the binding model. Results: Dexmedetomidine selectively inhibits cancer cells. Catalytic subunit of the DNA-dependent protein kinase (PRKDC), indoleamine 2,3-dioxygenase 1 (IDO1), opioid receptor kappa 1 (OPRK1), glutaminyl-peptide cyclotransferase (QPCT), macrophage migration inhibitory factor (MIF), potassium voltage-gated channel, subfamily H (Eag-related), member 2 (KCNH2), cholinergic receptor, muscarinic 3 (CHRM3), and potassium intermediate/small conductance calcium-activated channel, subfamily N, member 4 (KCNN4) were identified as dexmedetomidine targets in TNBC. The expression levels of PRKDC, IDO1, MIF, KCNH2, CHRM3, and KCNN4 were found to be upregulated in TNBC tissues compared to non-TNBC tissues(p<0.05). Silencing of these genes was found to reduce the sensitivity of TNBC cells to dexmedetomidine(p<0.05). This effect was counteracted when the silenced genes were overexpressed, resulting in an increase in the sensitivity of cells to dexmedetomidine (p<0.05). Furthermore, a direct interaction between dexmedetomidine and IDO1 and CHRM3 was observed, which regulated the sensitivity of cells to dexmedetomidine(p<0.05).Conclusion: IDO1 and CHRM3 are direct targets of dexmedetomidine in TNBC.

Diet-related diseases impact populations across the globe. While intertemporal preferences—a fundamental preference for the distribution of benefits across time—have been used to explain low-quality food choices, recent literature proposes another cause: inattention to future implications (or opportunity costs) of the options faced. Food choices tend to become habitual to conserve cognitive resources, rather than carefully modeling future health impacts. Both low discount rates for future benefits and attention to future health impacts predict healthier decisions. While intertemporal preferences are stable, attention may provide an opportunity to intervene in the decision process to promote healthier decisions. In this study, we test the impact of a simple message that highlights health during food choice on the healthiness of foods chosen and on health consideration and intertemporal preferences. Our results show that actively considering health outcomes and lower discount rates lead to healthier food choices. We find that messaging increases the consideration of health outcomes during food choice but does not affect intertemporal preferences, suggesting that simple prompts may be an effective way to promote decisions balancing short and long-term benefits by drawing attention to overlooked opportunity costs of choices.

Primary ciliary dyskinesia (PCD) is caused by pathologic variants in over 50 different genes that affect the structure and function of motile cilia. Low nasal NO (nNO) is a biomarker for diagnosis in patients with features of PCD; but the reason why it is low is unclear. At the cellular level, a characteristic feature shared by most PCD patients is that antigens and other particles are not cleared from the epithelial surface. Poor antigen clearance results in pro-oxidant pathway activation and airway epithelial damage and may predispose PCD patients to DUOX1- and IL33- mediated asthma. Secondary ciliary dysfunction, such as that caused by viruses or by smoking, can also contribute to asthma development. Variants in genes underlying the function of cilia, can be associated with poor lung function, even in the absence of PCD. Single nucleotide polymorphisms in PCD – related genes can be associated with increased asthma severity. The role of cilia and antigen stasis is the pathophysiology of asthma is an important area for research, because specific airway clearance techniques and other therapeutic interventions, such as antioxidants, could be of value in preventing the development of asthma and asthma-like symptoms.

This research assessed the level of peer influences among the students of Ebonyi State University, Abakaliki and the existing policy framework in the University to control its negative impact. Objectives: To assess the knowledge, attitude and practice of peer pressure influence control among the students of the institution. Methodology: We used a cross-sectional design, a structured questionnaire of a five-point Likert scale as a veritable instrument for collecting the data from 30 student respondents. The questionnaire was made up of four key sections comprising student’s demographic parameters, knowledge, attitude and practice of students on the subject matter. Data collected was analyzed in a table of descriptive statistics to determine the total, range, mean and median, which were used to ascertain students’ level of knowledge, attitude, practice and countermeasures to overcome negative peer influences emanating from their peers. Results: The mean value outcome of knowledge of students fall between 2.7 to 3.3, the mean value for attitude of student falls between 2.4 to 3.6, while the practice of students falls between mean value 2.7 and 3.2. Most of these outcomes represents poor or weak weight factor which requires several levels of interventions. Conclusion: This study highlights the overriding importance of peer pressure management among the students of Ebonyi State University, Abakaliki to create a safe academic environment and guarantee higher academic performances. This research recommended that the University management should commission research on peer pressure among students, the causes, manifestations and possible remedies to enable them to develop a comprehensive framework for the University.

Relativistic shocks are one of the most plausible sites of the emission of strongly variable, polarized multi-wavelength emission from relativistic jet sources such as blazars, via diffusive shock acceleration (DSA) of relativistic particles. This paper summarizes recent results on a self-consistent coupling of diffusive shock acceleration and radiation transfer in blazar jets. We demonstrate that the observed spectral energy distributions (SEDs) of blazars strongly constrain the nature of hydromagnetic turbulence responsible for pitch-angle scattering by requiring a strongly energy-dependent pitch-angle mean free path. The prominent soft X-ray excess (``Big Blue Bump'') in the SED of the BL Lac object AO 0235+164 can be modelled as the signature of bulk Compton scattering of external radiation fields by the thermal electron population, which places additional constraints on the level of hydromagnetic turbulence. It has further been demonstrated that internal shocks propagating in a jet pervaded by a helical magnetic field naturally produce polarization-angle swings by 180$^o$, in tandem with multi-wavelength flaring activity, without requiring any helical motion paths or other asymmetric jet structures. The specific application of this model to 3C279 presents the first consistent, simultaneous modeling of snap-shot SEDs, multi-wavelength light curves and time-dependent polarization signatures of a blazar during a polarization-angle (PA) rotation. This model has recently been generalized to a lepto-hadronic model, in which the high-energy emission is dominated by proton synchrotron radiation. It is shown that in this case, the high-energy (X-ray and $\gamma$-ray) polarization signatures are expected to be significantly more stable (not showing PA rotations) than the low-energy (electron-synchrotron) signatures.

As there exist no repulsive forces in strong interaction, in a hypothetical approach, strong interaction can be assumed to be equivalent to a large gravitational coupling. Based on this concept, strong coupling constant can be defined as a ratio of the electromagnetic force and the gravitational force associated with proton, neutron, up quark and down quark. With respect to the product of strong coupling constant and fine structure ratio, we review our recently proposed two semi empirical relations and coefficients 0.00189 and 0.00642 connected with nuclear stability and binding energy. We wish to emphasize that- by classifying nucleons as ‘free nucleons’ and ‘active nucleons’, nuclear binding energy can be fitted with a new class of ‘three term’ formula having one unique energy coefficient. Based on the geometry and quantum nature, currently believed harmonic oscillator and spin orbit magic numbers can be considered as the lower and upper “mass limits” of quark clusters.

The superfamily of Acid proteases has two catalytic aspartates for proteolysis of their peptide substrates. Here, we show a minimal structural scaffold, the Structural Catalytic Core (SCC), which packs all conserved substructure elements around the catalytic machinery, and which can be found in all enzymes of the Acid proteases superfamily. The SCC is a dimer of several structural blocks, such as the DD-link, the D-loop and the G-loop, around two catalytic aspartates in each protease subunit or within an individual chain. The dimer of two D-loop/DD-link substructures makes a DD-zone, and the dimer of two D-loop/G-loop substructures makes a psi-loop. These structural markers are useful for protein comparison, structure identification, protein family separation and protein engineering.

The Active Distribution Networks (ADNs) are Multi-Input Multi-Output (MIMO) systems with coupled dynamics which cause interactions among the control loops of the Distributed Energy Resources (DERs). This undesired effect lead to performance degradation in the voltage control. To mitigate the effects of these unavoidable coupling, the present paper proposes a systematic design procedure based on the analysis of the interaction's sources. In details, each DER is equipped with a double loop PI to control the active and reactive powers output by the Voltage Source Converter (VSC) which connects the DER to the network's node. Furthermore, to guarantee Ancillary Services (ASs), the two loops are coupled by a simple mechanism of cooperation of the active power to voltage regulation realized by a filtered droop law. To achieve voltage regulation with reduced loop interactions, the PI parameters and the filter's pulse are designed according to a two sequential steps procedure based on the (Internal Model Control) IMC technique. Simulation studies are finally presented to demonstrate that the proposed design method achieves both reduction of the loop interaction and robust voltage control in presence of model parameter uncertainty in the MIMO model.

This paper presents experimental identification and vibration suppression of a flexible manipulator with non-collocated piezoelectric actuators and strain sensors using optimal multi-poles placement control. To precisely identify the system model, a reduced order transfer function with relocated zeros is proposed, and a first-order inertia element is added to the model to compensate the non-collocation. Comparisons show the identified model match closely with the experimental results both in the time and frequency domains, and a fit of 97.2% is achieved. Based on the identified model, a full-state multi-poles placement controller is designed, and the optimal locations of the closed loop poles are determined. The feasibility of the proposed controller is validated by simulations. Moreover, the controller is tested for different locations of the closed loop poles, and an excellent performance of the optimal locations of the closed loop poles is shown. Finally, the effectiveness of the proposed controller is demonstrated by experiments. Results show that the vibrations of the expected modes are significantly diminished. Besides, vibrations of the higher modes are also slightly suppressed. Accordingly, multi-mode vibrations of the manipulator are well attenuated, and the tip displacement converges quickly with the proposed method.

Background & Objective: Acne Vulgaris is a common skin disease, with 5 % prevalence in Pakistan and has a significant physiological, psychological, emotional and social impact on the population, our study aims to estimate its annual economic burden per person in Pakistan.Methodology: Economic burden was estimated by using Cost of Illness analysis. All types of costs, including direct medication costs, direct non-medical costs and indirect costs due to loss of work. Data were collected from online databases and literature reviews. Results: Cost of illness analysis estimated that the cost of Acne Vulgaris treatment varies for mild, Moderate and severe acne. Acne is causing an annual economic burden of PKR 1,92,366 PKR per person (direct cost is PKR 1,86,366 and indirect cost 6,000) for an expensive treatment and PKR 53,550 (direct cost is PKR 47550 and indirect cost 6,000) for a cheap treatment. Limitation: Being an LMIC, Pakistan needs extensive study on the pharmacoeconomic analysis of Acne for proper and rational allocation of resources. Conclusion: Acne has a significant economic burden in Pakistan. Even with significant impact of Acne, there is very minute work done about Acne in Pakistan.

The distribution of zakat, which is still carried out directly through mosques or zakat amil bodies, can hinder the payment process due to inaccurate calculations and difficulties in finding zakat amil institutions. In the digital era, information technology is very important in the management of zakat, alms, and infaq. Therefore, a zakat information management system was created. The e-Zakat program, developed using the waterfall method, plays an important role in five main aspects of zakat management: muzaki and mustahiq data collection, zakat collection, zakat distribution, mustahiq development, and reporting. The use of information technology in this program is expected to increase efficiency, accountability, transparency, as well as the reach of zakat and muzaki involvement.

In permafrost regions, ground surface deformations induced by freezing and thawing threaten the integrity of the built environment. Mapping the frost susceptibility of the ground at a high spatial resolution is of practical importance for the construction and planning sectors. We processed Sentinel-1 Interferometric Synthetic Aperture Radar (InSAR) data from thawing seasons 2015 to 2019, acquired over the area of Ilulissat, West Greenland. We used a least-squares inversion scheme to retrieve the average seasonal displacement (S) and long-term deformation rate (R). We secondly investigated two different methods to extrapolate active layer thickness (ALT) measurements, based on their statistical relationship with remotely-sensed surface characteristics. A Generalized Linear Model (GLM) was first implemented, but the model was not able to fit the data and represent the ALT spatial variability over the entire study domain. ALT were alternatively averaged per vegetation class, using a land cover map derived by supervised classification of Sentinel-2 images. We finally estimated the active layer ice content and used it as a proxy to map the frost susceptibility of the ground at the community scale. Fine-grained sedimentary basins in Ilulissat were typically frost susceptible and subject to average seasonal downward displacements of 3 to 8 cm. Areas following a subsiding trend of up to 2.6 cm/yr were likely affected by permafrost degradation and melting of ground ice below the permafrost table. Our approach enabled us to identify frost-susceptible areas subject to severe seasonal deformations, and/or long-term subsidence induced by degrading permafrost. Used in combination with traditional site investigations, InSAR maps provide valuable information for risk management and community planning in the Arctic.

The transition to sustainable mobility is a recognized socio-economic and environmental challenge, particularly among young adults in low- and middle-income countries (LMICs). This paper addresses the lack of comprehensive research on mobility patterns for LMICs by examining the travel patterns of students, staff, and lecturers at the National Advanced School of Public Works, Yaoundé (NASPW) to understand transport mode choices and barriers to the use of public and active transport modes. Data was collected through online questionnaires from 425 participants. Findings revealed that most students (27.5%) used multiple modes of transport, with moto-taxis being the most common (21%). Lecturers primarily used private cars (50%), while staff relied on taxis or multiple modes (33%). Accessibility, vehicle speed, and flexibility appeared as the most important reasons for the preferred modes of transport. Barriers included long waiting times and traffic congestion for public transport, and distance and inadequate infrastructure for active mobility. The usage of public transportation was encouraged by its affordability and reduced travel time, whilst active options were preferred due to their cost savings and health benefits. To promote sustainable mobility for campus travel, it is crucial to encourage active modes, develop mass transport systems, and raise awareness through symposiums and conferences among students and staff.

This literature review offers a comprehensive analysis of the design and optimization of microstrip patch antennas for wireless communication systems, drawing insights from a variety of research papers. It examines diverse approaches aimed at enhancing antenna performance and functionality. Key topics explored include optimization of resonant frequency, design of antenna arrays, and bandwidth enhancement. Noteworthy optimization techniques, such as genetic algorithms and artificial neural networks, are discussed, highlighting their effectiveness in achieving superior antenna performance. Application-specific solutions tailored to areas such as military communication and RFID systems are emphasized. The review underscores the significant role played by optimization techniques in achieving desired performance metrics and identifies future research directions, including multi-objective optimization, investigation of robustness and reliability, and integration with advanced technologies. Overall, this literature review provides valuable insights into the state-of-the-art in microstrip patch antenna design and optimization, guiding future research endeavors in this dynamic and rapidly evolving field.

Antibiotic prescription is the first line of treating bacterial diseases. But it affects the composition and function of non-targeted intestinal microbiota. Antimicrobial resistance will be the cause for the death of millions of people worldwide. By considering collateral damage of antibiotics, searching an alternative antimicrobial agent will be a solution to minimize the problems. Probiotics, prebiotics and synbiotics are an alternative to antibiotics. Thanks to GIT microbes as they are responsible for metabolism, energy production, protection from pathogens and immunomodulation. So, it is appreciable if the gut microbiota modulated through consumption of probiotics, prebiotics and synbiotics. Probiotic effects are genus and species specific. To get good health benefit of probiotics, safety of probiotics should be assessed before using them. This is mandatory for prebiotics and synbiotic selection. So this review paper gives information about side effects of antibiotics on gut microbiota, description of probiotics, prebiotics and synbiotics as alternative to antibiotics in modulating GIT microbiota, techniques of assessing safety of probiotics and health benefits of probiotics, prebiotics and synbiotics with scientific evidence in clinical trial and some disagreement and challenges of using probiotics, prebiotics and synbiotics.

Active ageing is defined as the process of optimizing opportunities for physical, social and mental health to enable older people to take an active part in society without discrimination and to enjoy an independent and good quality of life. The World Health Organization assumed this as a process for increasing and maintaining an individual’s participation in activities to enhance his/her quality of life. In this survey, the authors addressed the following question: “Is assistive technology (AT) for mobility contributing to enhancement of lifelong capacity and performance?”. From June 2015 until February 2016, 96 community dwelling adults, AT users for mobility (powered wheelchairs, manual wheelchairs, lower limb prostheses, walkers, crutches and canes), aged 45-97, mean 67.02 +/- 14.24 years old, 56.3% female, were interviewed using the Psychosocial Impact of Assistive Devices Scale (P-PIADS), the Activities and Participation Profile related to Mobility (APPM) and demographics, clinical and questions about AT use and training. The participants’ profiles revealed moderate limitation and restrictions in participation, measured by the APPM (2.03). Most participants showed positive impact of AT; average scores obtained from the P-PIADS subscales were: Self-esteem 0.62, Competency 1.11 and Adaptability 1.10. P-PIADS total was 0.96, with the powered wheelchair users scoring the highest (1.53) and the walker users scoring the lowest (0.73). All subscales and P-PIADS total were positively correlated with the activities and participation profile. There was no relation between age and the psychosocial impact of AT or activities and participation profile. These results encourage the authors to follow these participants up for a lifelong intervention. To accomplish that aim, currently, the protocol is implemented at the AT prescribing centers in Coimbra, Portugal in order to assess the impact of AT on participation in society, one of the domains of the Active Ageing Index, a new analytical tool to help policy makers in developing policies for active and healthy ageing.

Climate warming is expected to have pronounced effects on Arctic and Subarctic ecosystems, especially regions underlain by discontinuous and relatively warm permafrost. The main goal of this research is to evaluate the vulnerability and dynamics of permafrost under climate warming across the various ecotypes in respect of ecosystem stability, socioeconomic impact, and for better understanding possible future environmental changes. We suggested the new version of the spatially distributed permafrost dynamics model (GIPL2-MPI), which is developed in the Geophysical Institute, University of Alaska Fairbanks. This model is based on the ecosystem approach to simulate the permafrost dynamics, which we are discussing in this paper. We combined ground-based observations and numerical freeze/thaw modeling using climate-ecosystem-permafrost interactions to understand the physical processes and mechanisms controlling permafrost physical state. We predict the changes in permafrost conditions using output from two GCMs (NCAR-CCSM4 and GFDL-CM3) and Five-Model Average Ensemble for the RCP-4.5 and RCP-8.5 scaled down to 1 by 1 km spatial resolution (https://uaf-snap.org/) across entire Alaska. Our result shows that by the end of the current century widespread near-surface permafrost degradation could begin everywhere in Alaska southward of the Brooks Range as well as across some spots at the North Slope Alaska.

Evaluation of drug permeability using cell monolayers is an important in vitro assay in the process of drug development, to identify compounds with favourable pharmacokinetics that may proceed to in vivo studies. When allowed to differentiate on permeable filters for at least 21 days, monolayers of Caco-2 cells develop morphological and functional properties similar to those of the intestinal epithelium. Permeability through Caco-2 monolayers is thus particularly relevant to assess drug absorption after oral administration. The major drawback of this assay is its very low throughput, with the cell monolayers being used in a single permeability assay. We have previously proposed a protocol to allow the re-use of the Caco-2 monolayer on additional permeability assays during the stable period and shown that cell monolayer integrity is maintained. In this work we evaluate the effect of re-use on the permeability of several reference compounds that permeate through passive pathways and show that the cell monolayers can be re-used twice in additional permeability assays. Preliminary results were also obtained regarding active transport pathways, and a new methodology is proposed to quantify the contribution from passive and active transport. This is a major step towards the full validation of the re-use methodology proposed, which at least triplicates the throughput of this important in vitro assay.

The inherited ‘EIA’ process at Brexit is based on a ‘Project’ period from Inception tothe start of construction works. The ‘Incompleteness’ of the process covers andidentifies stages that will impact on the environmental cycle: construction period,operational life, de-commissioning and a return to acceptable environmental footprint.A master environment structure-plan framework is required to commence with theupgrading of the complete ‘EIA’ process, embracing separate limbs for the UK’spriority environmental targets for climate change, and other major adverse effectswhich result in serious ‘harm’ to the UK environment. The identification of the processfor ‘incompleteness’ requires effective sustainability, and inclusion of effectivemanagement tools, for the essential ‘monitoring/control/recording’ proceduresthroughout the project life and the natural environmental cycle. This will allow theopportunity for a new approach to a structured ‘Suite of EIAR Directives’, to enable a‘EIAR’ regime that ‘will remain fit and proper for UK purpose’.

A rare genetic disorder caused by col18.a1 mutations, inherited mostly in autosomal recessive and rarely in autosomal dominant pattern, giving rise to ocular abnormalities and other associated disorders, the condition is referred to as Knobloch syndrome. This paper overviews the anterior and posterior ocular symptoms in Knobloch patients, thus demonstrating the major findings in Knobloch cases including the mutational analysis which discusses the proteins involved and exon number on which mutations are detected. Animal modeling done by knocking out col18.a1 has also been discussed to determine the functions of this gene which have been identified based on anomalies found in knock-out mice.

Sorghum grain processing can improve the nutritional content by promoting dietary properties that contribute to food security and economic development. The quality, nutritional content, and processing properties of sorghum bicolor grain can greatly affected by the inbred line races and variance in pericarp colour.The current study assessed the influence of the Husking Fraction Time Units (HFTU) process, which employed set time units per second (S), on the variation in the nutritional profile of fifty-one inbred line sorghum varieties based on distinct pericarp colours. When the assessment of the nutritional profile was involved: dry matter, total protein besides, namely mineral (P, K, S, Ca, Mg, Na, Fe, Zn, and Mn). The variety groups showed a significance value of (P < 0.05), indicating the study hypothesis's truth.The results demonstrated substantial impacts implied by the Husking Fraction Time Unit (HFTU) technique. This occurrence was noted when the dry matter percentage was increased in the husked products, specifically the endosperm (grits) and bran. The protein percentage redistributed by 19.2% compared to the whole grain and bran content. In comparison, the ratio of N/S was 14:1 in the S. bicolor and 12:1 in the kafirin in the bran part. Moreover, a strong correlation was observed among the examined minerals of S.bicolor and kafirin, such as the correlation between Ca: P, K: Na, and Fe: Zn attributed 80 (S) time unit, with correlation coefficients of R = 0.784 and R = 0.586, R= 517, R= 0.884, R= 0.745, and R = 0.893, respectively. At the same time, the 80 (S) time unit showed a significant effect on the colour property profile.The study results could benefit breeders and nutrition specialists in developing genotypes and processing sorghum grains, promoting research, and aiding several industrial sectors owing to the grain's adaptability and nutritional properties.

The importance of conflict analysis and safety considerations during work zone intervals at signalized intersections cannot be overstated, as these periods pose unique challenges and safety risks for both motorists and pedestrians. Work zones introduce temporary changes to traffic patterns, lane configurations, and signal timings, which can disrupt the flow of traffic and increase the likelihood of conflicts between vehicles and pedestrians. By conducting comprehensive conflict analysis, it is possible to identify potential conflict points, such as merging areas, pedestrian crossings, and lane transitions, and implement targeted safety measures to mitigate risks. Additionally, considering safety considerations during work zone intervals is paramount to safeguarding the well-being of road users and minimizing the occurrence of conflicts or collisions. Measures such as enhanced signage, temporary traffic control devices, and increased enforcement efforts can help promote compliance with traffic regulations and ensure the safe passage of vehicles and pedestrians through work zones. This study investigates the dynamics of traffic behavior and safety implications within work zones at signalized intersections, aiming to address key challenges and enhance intersection management strategies. Through comprehensive analysis, varying frequencies of Vehicle-to-Vehicle (V2V) conflicts were observed across different movement directions, with significant occurrences identified in specific phases of the traffic signal cycle. Specifically, 69 V2V conflicts in phase #1, 181 in phase #2, 31 in phase #3, 207 in phase #4, 1 in phase #5, 274 in phase #6, 93 in phase #7, and 186 in phase #8 were recorded. Furthermore, the examination of Vehicle-to-Pedestrian (V2P) conflicts underscored the importance of prioritizing pedestrian safety, with notable occurrences observed in phases associated with pedestrian crossing movements. Meanwhile, despite the closure of left-turn movements, instances of red light running persisted, with 69 red light running events in phase #1, 181 in phase #2, 31 in phase #3, 207 in phase #4, 1 in phase #5, 274 in phase #6, 93 in phase #7, and 186 in phase #8.To mitigate these safety concerns during work zone intervals, proactive measures are essential. Strategies include improving communication through clear signage and advanced warning systems, enhancing enforcement efforts with red light cameras and increased police presence, and investing in infrastructure improvements such as temporary pedestrian facilities. Integration of real-time data from sensors, particularly LiDAR technology, offers significant advantages in detecting conflicts and red light runners during work zone intervals. LiDAR's precise, real-time data on vehicle and pedestrian movements, combined with its 360-degree coverage and high spatial resolution, facilitates accurate detection and tracking of potential conflict scenarios, contributing to enhanced intersection safety and traffic management efficiency. This study endeavored to conduct a traffic safety analysis during work zone intervals at a signalized intersection in Baltimore City, known for its high rate of traffic crashes, utilizing LiDAR sensor technology.

The object of study in the article is the auxiliary variable-frequency electric drive onboard of an AC electric locomotive, and more precisely, the structure and parameters of the control system of the active corrector of power factor (ACPF), which is part of the electric drive, as a unit that ensures electromagnetic compatibility of the electric drive with other equipment on board the electric locomotive and catenary and its energy efficiency. The topic of the article's research is the substantiation of the structure of the ACPF control system, the choice of types (transfer functions) of controllers and the calculation of their parameters. The research method chosen was the calculation of the transfer functions of the controllers of the cascaded loops control system, followed by computer simulation using the OrCAD software. The results of simulating a cascaded two loops control system of an ACPF with different types of controllers are presented and analytically compared. It is concluded that it is advisable to use a cascaded two loops control system, containing a voltage control loop and a current control loop. The best results show the simulation when using an aperiodic current controller (A-controller) and a proportional-integral voltage controller (PI-controller). The data obtained serve as the basis for further improvement of the operation of the ACPF by enhancing and optimizing the settings, structure and algorithms of the control system, which, with the selected hardware of power converter unit, will allow the ACPF to perform its functions with a high degree of reliability in an entire range of disturbing and control influences.

The Amoebic Self Theory is a concept of the social psychology, which postulates that humans have a psychological boundary. As the authors of the concept propose [1], the function of the boundary is to allow psychological separation of one from the others. In this study, we examined how sen-sitivity to violation of the boundary, measured by an amoebic self scale, is connected with differ-ent types of procrastination sensu lato, measured by seven procrastination subscales. Only two of the seven procrastination aspects, i.e. the preference for pressure and outcome satisfaction, were negatively and significantly related to the spatial-symbolic domain of the amoebic self scale. The other purpose of this research was to examine the connection between the students’ grade point average (GPA) and scores obtained in the procrastination subscales. Only the non-adaptive aspect of procrastination predicted significantly the GPA. That is an important detail, because pointing out the gap between one’s self-opinion and the real, non dependent of the opinion, academic achievement. All these findings were considered in the academic context and consequences of these results were discussed.

This work is concerned with studying the change of some Optical and Electrical Properties of Ba_xFe_(1-x)TiO₄ thin films due to the change of the nano crystal size. Simple theoretical explanation based on the string theory was developed. The empirical results obtained indicated that the absorption coefficient, electrical conductivity, and the magnetic permeability increase upon decreasing the nano crystal size. However, the transmission coefficient, and the refractive index increase upon increasing the nano crystal size. All these changes are explained using a simple string model with the aid of Newton's laws. The capability of the string theory to explain this nano quantum behavior comes from the fact that the string theory recognize both the particle and the wave nature of the nano system. This is similar of course to the quantum approach which is based mainly on the dual wave particle nature of atomic systems and entities.

Recurrent sunspot groups were studied by using the Debrecen Photoheliographic Data (DPD) which covers more than 40 years. For this task it is necessary to make unambiguous the identification of the returning solar active regions. It starts with an algorithmic listing of possible returns, then the candidates of the algorithmic identifications are checked by the unique HTML-feature of the DPD. The final check is the application of an asymmetric Gaussian function introduced in previous articles to describe the development of short-lived sunspot groups observed continuously from start to end on the visible solar disc. The data of correctly identified recurrent sunspot groups fit surprisingly well to this function throughout the rotations enabling the reconstruction of the development also on the far side of the sun. The primary goal was to find any relationship between the maximum area and the lifetime deduced from the data of the asymmetric curves. This relationship is more complex than earlier results in the literature for short-lived groups. The lifetimes exhibit weak dependencies on the heliographic latitude and solar cycle phase. An apparently returning active area is rather an active nest if its data do not fit to the asymmetric Gaussian.

The global textile sector, pivotal to economic development, significantly contributes to environmental degradation, prompting a shift towards sustainable raw material sources. Embracing circular economy principles, this industry is exploring the valorization of agricultural by-products. This study introduces an innovative approach to repurposing mango waste into valuable textile fibers, a byproduct of the fruit processing industry, predominantly generated during juice and jam production. The focus is on the lignocellulosic constituents of mango waste, specifically the peel, seed, and fibrous material, traditionally considered as refuse. Previous research has predominantly utilized mango peel in pectin extraction for food applications, whereas the potential of seed and fibrous content remains underexplored. This investigation endeavors to transform these fibrous by-products into high-value materials suitable for textile manufacturing. The process involved washing, drying, and comprehensive physicochemical characterization of mango fibers, emphasizing lignin quantification, revealing a composition of 12.2% lignin. An experimental design was employed to elucidate the impact of variables such as liquid-to-solid ratio, reaction duration, and sodium hydroxide concentration on lignin dissolution through alkaline hydrolysis. Optimal conditions—10% NaOH concentration, 30 mL/g liquid-to-solid ratio over six hours—achieved an 83% reduction in lignin content. The resulting fibers exhibited properties akin to conventional natural fibers, including a favorable aspect ratio indicative of their suitability for textile applications. A subsequent softening process using propylene glycol enhanced the fibers' spinability, producing a durable, textured fabric ideal for eco-conscious fashion applications, including bags, footwear, and accessories. This research demonstrates the feasibility of converting mango waste into a textile-worthy material and underscores the importance of waste revalorization in promoting sustainability within the circular economy framework.

Air pollution is a critical issue impacting urban environments, leading to severe health problems and environmental degradation. This comprehensive review examines the potential of green systems—specifically green walls, active green walls, and urban greenery systems—to mitigate atmospheric pollutants such as particulate matter (PM), volatile organic compounds (VOCs), and carbon dioxide (CO2). By systematically analyzing 44 recent studies, the review highlights the pollutant capture efficiency of various green technologies and plant species in both indoor and outdoor settings. Active green walls, particularly those utilizing plant species such as Chlorophytum comosum and Sansevieria trifasciata, were found to be highly effective, with VOC reduction efficiencies up to 96.34%, PM reductions by 65.42%, and CO2 reduction rates reaching 4.8% under optimal conditions. The review identifies key strengths in current research, including diverse experimental setups and the use of sophisticated measurement techniques, but also notes significant limitations such as variability in experimental conditions and a lack of long-term performance data. The study underscores the importance of proper maintenance to sustain green systems' efficacy and highlights the potential issue of pollutant resuspension, which remains under-researched. Practical implications for urban planning are discussed, advocating for the integration of effective green systems into urban infrastructure to enhance air quality and public health. Recommendations for future research include the need for standardized metrics, long-term studies, economic feasibility analyses, and real-world validation of simulation models to better understand and optimize green systems for urban air pollution mitigation.

We present a study of the radio variability of bright, $S_{1.4}\geq100$ mJy, high-redshift quasars at $z\geq3$ on timescales up to 30--40 years. The study involved simultaneous RATAN-600 measurements at frequencies of 2.3, 4.7, 8.2, 11.2, and 22.3 GHz in 2017--2020. In addition, data from the literature were used. We have found that the variability index $V_S$ of the quasars ranges from 0.02 to 0.96, with about half of the objects in the sample showing a variability index in the range of 0.25--0.50, which is comparable to that of the blazars at lower redshifts. The distribution of $V_S$ at 22.3 GHz is significantly different from that at 2.3--11.2 GHz, which may be attributed to the fact that a compact AGN core dominates at the source's rest frame frequencies greater than 45 GHz, leading to higher variability indices obtained at 22.3 GHz (the $V_S$ distribution peaks around 0.4) compared to the lower frequencies (the $V_S$ distribution peaks around 0.1--0.2). Several source groups with distinctive variability characteristics were found using cluster analysis of quasars. We propose 7 new candidates for gigahertz peaked-spectrum (GPS) sources and 5 new megahertz peaked-spectrum (MPS) sources based on their spectrum shape and variability features. Only 6 out of 23 sources previously reported as GPS demonstrate a low variability level typical of classical GPS sources ($V_{S} < 0.25$) at 4.7--22.3~GHz. When excluding the highly variable peaked-spectrum blazars, we expect no more than 20\% of the sources in the sample to be GPS candidates and no more than 10\% to be MPS candidates.

We analyse the light curve in the R-band gathered during the 2015/16 observing season of OJ287. We did a search for QPOs using several methods in wide time domain. No statistically significant periods were found in the high frequency domain both in the ground data and also in K2 observations. In the longer periods domain the Lomb-Scargle periodogram revealed several peaks above the 99\% significance level. The longest one, about 95-day, corresponds to the ISCO period of the more massive SMBH. The 43-day period could be an alias or can be attributed to accretion in the form of two armed spiral wave.

This article is devoted to the problem of genetically coding of inherited cyclic structures in biological bodies, whose life activity is based on a great inherited set of mutually coordinated cyclic processes. The author puts forward and arguments the idea that the genetic coding system is capable of encoding inherited cyclic processes because it itself is a system of cyclic codes connected with Boolean algebra of logic. In other words, the physiological processes in question are cyclical because they are genetically encoded by cyclic codes. In support of this idea, the author presents a set of his results on the connection of the genetic coding system with cyclic Gray codes, which are one of many known types of cyclic codes. This opens up the possibility of using for modeling inherited cyclic biostructures those algebraic and logical theories and constructions that are associated with Gray codes and have long been used in engineering technologies: Karnaugh maps, Hilbert curve, Hadamard matrices, Walsh functions, dyadic analysis, etc. Additionally, the connections of these constructions with statistical rules of genomic DNAs and binary-genomic numbers are considered.

The growing attention for plug-in electric vehicles, and the associated high-performance demands, have initiated a development trend towards highly efficient and compact on-board battery chargers. These isolated ac-dc converters are most commonly realized using two conversion stages, combining a non-isolated power factor correction (PFC) rectifier with an isolated dc-dc converter. This, however, involves two loss stages and a relatively high component count, limiting the achievable efficiency and power density and resulting in high costs. In this paper a single-stage converter approach is analyzed to realize a single-phase ac-dc converter, combining all functionalities into one conversion stage and thus enabling a cost-effective efficiency and power density increase. The converter topology consists of a quasi-lossless synchronous rectifier followed by an isolated dual active bridge (DAB) dc-dc converter, putting a small filter capacitor in between. To show the performance potential of this bidirectional, isolated ac-dc converter, a comprehensive design procedure and multi-objective optimization with respect to efficiency and power density is presented, using detailed loss and volume models. The models and procedures are verified by a 3.7 kW hardware demonstrator, interfacing a 400 V dc-bus with the single-phase 230 V, 50 Hz utility grid. Measurement results indicate a state-of-the-art efficiency of 96.1% and power density of 2.2 kW/dm³, confirming the competitiveness of the investigated single-stage DAB ac-dc converter.

The global issues of overweight and sedentary lifestyles demand comprehensive responses from health systems, yet health education still needs to be more cohesive and less sporadic. This study focuses on primary school children as a specific target for instilling healthy habits, employing ac-tive learning strategies to address healthy diet and physical activity. Through Problem-Based Learning projects, the study engaged fourth-grade primary students in acquiring healthy habits. The study was carried out over four consecutive years at a school with two lines, allowing the employment of an opportunity sample and evaluating intervention and control groups by com-paring their corresponding scores. Control groups integrated a total of 54 students, while the in-tervention group included a total of 159 students. A pre-test and post-test questionnaire were used for data collection. Evaluation differential scores revealed statistically significant higher scores in the intervention groups: 3.62 points in control groups and 6,94 in intervention groups, particu-larly in attitudinal competences. These strategies not only facilitated the development of crucial skills such as information search, synthesis, representation, analysis, decision-making, teamwork, and intrapersonal awareness but also significantly broadened the knowledge acquired in aspects related to healthy habits. This approach proved effective in helping children comprehend the im-portance of healthy choices and encouraged integrating such habits into their daily lives.

Triple-negative breast cancer (TNBC), lacking specific receptors found in other breast cancer subtypes, poses significant treatment challenges due to limited therapeutic options. Therefore, it is necessary to develop novel treatment approaches for TNBC. In the last few decades, many attempts have been reported for alternative tools for TNBC treatment: immunotherapy, radiotherapy, targeted therapy, combination therapy, and nanotechnology-based therapy. Among them, combination therapy and nanotechnology-based therapy show the most promise for TNBC treatment. This review outlines recent advancements in these areas, highlighting the efficacy of combination therapy (immunotherapy paired with chemotherapy, targeted therapy, or radiotherapy) in both preclinical and clinical stages and nanotechnology-based therapies utilizing various nanoparticles loaded with anticancer agents, nucleic acids, immunotherapeutics, or CRISPRs in preclinical stages for TNBC treatment.

The active layer thickness (ALT) is affected by local soil material and surface vegetation coverage in Tibetan plateau permafrost region. The human activities and engineering construction along the Qinghai-Tibet Highway (QTH) destroyed the surface vegetation coverage, which have seriously influenced the ALT and heat exchange balance. Meanwhile, the changes of the detailed internal structure in the active layer will affect the stability of engineering infrastructure. Ground-penetrating radar (GPR) was used to detect the ALT in the permafrost region. However, researches on the detailed structure of the active layer and spatial variation information of ALT are rare, the main reason given for this is that the lack of advanced imaging techniques to enhance the GPR images. In this paper, the researchers focus on solving this problem by applying the reverse time migration (RTM) method to GPR field data acquired in the Beiluhe region. Analyses of the results led to conclusions as follows: a) The RTM algorithm is proved to be accurate for imaging the characteristics of the active layer through the dielectric constant model obtained by common midpoint and GPR data velocity analysis. b) The result of RTM profiles show the loose structure and graben-like fine internal structure. Combining with drill data and soil materials information, the researchers deduce the graben-like structure might be coarse gravel layer, which may be related to subgrade settlements in some local area. c) The 2D contour maps not only show the spatial variation feature of ALT at two sides of the highway, but also can compensate the defect of the research for single 2D survey line. The ALT is about 0.6~0.8 m in most areas, and about 0.8~0.9 m near the highway at west side of the QTH on the 2D contour maps. From the RTM interpretation profile, the closer to the plash, the deeper thawed active layer. The detailed internal structure of the active layer and 2D contour maps of ALT have great significance for the study of fine internal structure and the characteristic of ALT spatial variation in the Tibetan plateau under the background of climatic change.

The fast-paced advancements in the technological space and its application have influenced greatly its usage in teaching especially in science and mathematics subjects. The overall objective of this study was to examine the physical proximity of learning in shaping students’ mastery of technology-enhanced mathematics and science concepts. Consequently, the study investigates how technology can promote teaching presence toward the mastery of mathematics and science concepts and how the latter can be grasped by the learners using physical proximity strategies. This research study used a mixed-method research design and was conducted in Kayonza District (Eastern Province) and Gasabo District (Kigali), Rwanda. The participants were postgraduate students at the University of Rwanda, College of Education undertaking a master degree in chemistry education, mathematics education, physics education and biology education under the Africa Centre of Excellence for Innovative Teaching and Learning Mathematics and Science. A sample size of 88 students was selected from both Remera and Rukara campuses. Participants were in a range of 21-40 years old. The study used both interviews and questionnaires to collect empirical data. Qualitative data was analyzed using thematic analysis while quantitative data was analyzed using R software. The study reveals that a virtual lab is a vital tool in promoting teaching presence regarding the mastery of mathematics and science concepts. The use of virtual labs seems to foster instructional design and organization from teachers. Moreover, virtual labs seem to facilitate meaningful discourses, interactions between learners and between the learners and the teacher. The findings show also that virtual visualizing seems also to play a role in direct instruction where the teacher offers guidance and direction to learners on various subjects or issues of contention that may need the clarity. Thus 87.6% of the respondents affirm that technology integration in learning is efficient in bridging the gap of physical proximity among learners and teachers through various virtual instruments and platforms. The study also demonstrates that various forms of technology that can be used to bring mathematics and science concepts to the learners’ physical proximity including WhatsApp, Microsoft Teams, Google Meet, Zoom and Webex. The study therefore recommends that visualization should be integrated in the curricula, training of teachers and students to maximize physical proximity components and sharing of best practices among teachers and students.

In the realm of metal steel and iron manufacturing, there is a constant drive to optimize production efficiency and enhance the quality of the final products. This abstract explores a paradigm shift in this industry through the utilization of Computational Fluid Dynamics (CFD) as a powerful tool for achieving these goals .The study focuses on various critical aspects of the manufacturing process. Firstly, it delves into three-phase processes such as slag and gas entrainment in liquid steel, which have a significant impact on the overall product quality. Understanding and optimizing these processes is crucial to ensure the desired chemical composition and physical properties of the final metal.The abstract investigates the role of CFD in vacuum degassing, a process that plays a pivotal role in removing impurities, such as hydrogen and oxygen, from the liquid steel. By leveraging CFD to simulate and analyze the fluid flow patterns, researchers and engineers can design more efficient vacuum degassing systems, leading to improved product purity and reduced waste.Another crucial aspect explored in this abstract is the alloy melt and mixing process. By employing CFD simulations, researchers can gain insights into the movement of different alloy components and optimize their distribution within the melt. This aids in achieving the desired alloy composition, ensuring uniformity, and enhancing the mechanical properties of the final product.In addition, the study delves into the movement and flotation of inclusions, which are unwanted impurities present in the metal. CFD can be utilized to model and analyze the behavior of these inclusions, enabling engineers to design efficient strategies for their removal, thereby enhancing the purity and integrity of the final product.Moreover, the abstract considers the impact of melt temperature losses, which can occur during different stages of the manufacturing process. By employing CFD, it becomes possible to understand and mitigate these temperature losses, leading to improved energy efficiency and better control over the manufacturing parameters.Part 1 of this abstract critically evaluates the use of CFD in iron making, analyzing its benefits and limitations. It highlights how CFD can aid in process optimization, improving the understanding of complex phenomena involved in iron making, and ultimately leading to enhanced production efficiency.Part 2 focuses on the application of CFD in steel making and steel operation. It explores the fluid flow dynamics during different stages of steel production, including refining, casting, and rolling. By leveraging CFD, engineers can optimize these processes, leading to improved product quality, reduced defects, and increased productivity.This abstract demonstrates the transformative potential of Computational Fluid Dynamics in metal, steel, and iron manufacturing. By utilizing CFD as a tool to model and analyze complex fluid flow phenomena, researchers and engineers can revolutionize the production process, maximizing efficiency, and ensuring high-quality end products.

Well-exposed fluvio-deltaic Surma Group successions of the northeastern Surma Basin provide a direct analogue to its equivalent subsurface successions—the main hydrocarbon reservoirs in Bangladesh. The various levels of lateral and vertical heterogeneities lead to changes in the subsurface sandbody distributions and their reservoir qualities across fields. The present study aims to identify the heterogeneities in the fluvio-deltaic Surma Group successions by detailed sedimentological analysis of the Mio-Pliocene-aged Surma Group successions. Eleven lithofacies have been identified and based on the recurring pattern of these facies within the Surma Group, five facies associations have been identified. The facies associations indicate that these deposits originated from diverse depositional settings, ranging from the prodelta to the alluvial to delta plain. As a whole, they represent a progressive shallowing upward succession with two transgressive events in the upper and lower parts of the Surma Group. Five levels of heterogeneities such as prodelta mud (HL-I), tidal heterolithic deposits (HL-II & III), interbedded mud units in delta front (HL-IV), and intercalated mud laminae, drapes (HL-V) have been identified in the fluvio-deltaic Surma Group. The study suggests that the various levels of reservoir heterogeneities are controlled by the occurrence and distribution of various facies associations.

The objective of this study was to analyze the epidemiological links of HIV, HCV and HIV-HCV coinfections to less studied types of transmission in certain populations. We performed an observational, prospective study on 903 patients aged between 15-87 years who took part in the Open Test Project. They were divided into two subgroups: general population and individuals from prisons, and questioned about multiple risk factors. Chi-Square Independence Test was used to establish correlations between the risk factors and the results of the screening tests. Logistic regression was used to calculate the probability of a reactive screening test based on each independent risk factor and age. HIV was very strongly associated with unprotected sexual intercourse with HIV-positive partners (the strongest association), unprotected sexual intercourse with sex workers, newly diagnosed sexually transmitted diseases (STDs), intravenous drug use (IDUs) and sharing injecting materials. In the case of HCV reactive tests, very strong associations have been established with injecting drug use (the strongest association), unprotected sexual intercourse with IDUs and sharing injecting materials. Our study indicates the need for implementing targeted public health programs, tailored to the local epidemiology that can ultimately lead to micro-elimination of hepatitis and HIV infections in this area.

The theory of Ismail's non-extensive maximum entropy solution (NME) is described in detail. It is used as an inductive inference technique for heavy-tailed queues with a non-robust mean queue length and a non-extensive "long-range" interaction. In our novel method, we substitute the non-robust mean queue length for the conventional Pollaczeck-Khinchin mean queue length. In other words, the new non-extensivity parameter q will be included in the resulting state probability function. Numerical portraits are provided to capture the influential effect of the derived formalism, , on the stable M//1 queue with heavy tails. More potentially, some applications of Hurst Exponent to social computing and connected health are provided. Conclusion with some challenging open problems and possible future research pathways are given.

The aim of the study was to assess the effects of an 8-week cognitive-motor training program on postural control and knee proprioception under single and dual-task conditions. Design: Randomized clinical trial. Methods: 20 healthy and physically active older adults (73.255.98 years) volunteered to participate and were randomly assigned into an experimental and a control group (EG and CG). Postural control was measured with the Romberg test, with open (RBOE), closed eyes (RBCE) and under unipodal dominant side (RUDL) conditions. Proprioception was assessed by measuring participants’ ability to reposition their dominant knee at 45º. Finally, performance on the cognitive task was measured through a subscale of the Barcelona Test called “categorical evocation in associations.” The EG and the CG completed 8-week training programme with two sessions the 30 minutes per week of postural control and proprioception exercises. The EG additionally included music in each session. Results: The results showed significant differences in both group at the postural control tests (RBOE and RBCE) and proprioceptive test post intervention. Conclusion: The 8-week training program had a positive impact on the post-intervention results for motor control and proprioception, but not on the results of the cognitive task. There were no significant differences between the groups that carried out sessions with or without music.