Autism spectrum disorder (ASD) is a common condition with lifelong implications and a strong hereditary component suggesting genetic underpinnings. The last decade has seen dramatic improvements in DNA sequencing and related bioinformatics and databases. We analyzed the raw DNA sequencing files on the Variantyx® bioinformatics platform for the last 50 ASD patients evaluated with trio whole genome sequencing (trio-WGS). “Qualified” variants were defined as coding, rare, and evolutionarily conserved. Primary Diagnostic Variants (PDV) additionally were in genes directly linked to ASD and matched clinical correlation. A PDV was identified in 34/50 (68%) of cases, including 25 (50%) cases with heterozygous de novo and 10 (20%) with inherited variants. De novo variants in genes directly associated with ASD were far more likely to be Qualifying than non-Qualifying versus a control group of genes not associated with ASD (P = 0.0002, odds ratio 29), validating that most are indeed disease related. Only 14/34 (41%) of PDV cases had the variant listed on the laboratory report, and reanalysis increased diagnostic yield from 28% to 68%. Variants that we assigned as PDVs yet not on the report were predominately de novo in genes not yet reported as ASD associated. Many subjects both with and without a PDV had inherited Qualifying variants in known ASD-associated genes, suggesting polygenic inheritance. Thirty-three subjects (66%) had treatment recommendation(s) based on DNA analyses. Our results demonstrate high yield of trio-WGS for revealing molecular diagnoses in ASD that is greatly enhanced by re-analyzing DNA sequencing files. In contrast to previous reports, de novo variants dominate the findings, mostly representing novel conditions. This has implications to the cause and rising prevalence of autism.

Seasonal snow cover is a fundamental component of both the global energy budget and the water cycle. Its properties such as fractional snow cover or albedo are particularly affected by climate change. Several methods based on satellite data products are available to estimate these properties, each one with its pros and cons. This work presents a novel methodology that integrates three indexes applied to MODIS satellite data (Spectral Mixture Analysis (SMA), Normalized Difference Snow Index (NDSI) and Melt Area Detection Index (MADI)), to perform a spatio-temporal reconstruction of the fractional snow cover and albedo at 250 m spatial resolution in the Brunswick Peninsula, southwest Patagonia during the cold season (April-October) for the period 2000-2020. Three main steps are included: (1) the increase of the spatial resolution of MODIS (MOD09) data to 250 m using a spectral fusion technique; (2) the snow-cloud discrimination; (3) the daily spatio-temporal reconstruction of snow extent and its albedo signature with subpixel detection using the endmembers extraction and spectral mixture analysis. The results show a 98% agreement between MODIS snow detection and ground-based snow measurement at the automatic weather station Tres Morros (53.3174 °S, 71.2790 °W), with fractional snow cover values between 20% and 50%, showing a close relationship between snow and vegetation type. The number of snow days compiled from the MODIS data indicates a good performance (Pearson correlation of 0.9) compared with the number of skiing days at Cerro Mirador ski centre near Punta Arenas. Although the number of seasonal snow days show a significant increase trend of 0.54 days/year in Brunswick Peninsula during the 2000-2020 period a significant decreasing trend of -4.64 days/year was detected during 2010-2020, and also below the 400 m a.s.l. elevation, which is the most affected area. A reconstruction of the monthly mean temperature using the ERA5 Land reanalysis product shows a significant warming trend in May (0.068 ºC/year) and October (0.098 ºC/year) in the 2000-2020 period. Under the future emission scenario RCP8.5, the regional climate model RegCM4 predicts further warming during 2020-2050 of 0.059 ºC/year in July, 0.088 ºC/year in August, and 0.019 ºC/year in October, which will further reduce snow cover.

Soil texture is a key property influencing most soil physical, chemical, and biological processes and its catchment-scale spatial variation may yields insights for soil management. Texture data are generally available only at a few locations, since sampling and laboratory analyses are time consuming. Therefore, it is essential to predict soil size particles texture variability using appropriate methods. Moreover, soil texture distribution across a catchment is influenced by erosion and sedimentation processes controlled by hillslope morphology, which can be quantified through some topographic attributes. The study was aimed to evaluate the ability of a multivariate approach based on non-stationary geostatistics to merge remotely sensed high-resolution LiDAR-derived topographic attributes with Vis-NIR diffuse reflectance spectroscopy and laboratory analysis to produce high-resolution maps of soil sand content and estimation uncertainty in a forested catchment in southern Italy. Moreover, the proposed approach was compared with the commonly used univariate approach of ordinary kriging. Soil samples were collected at 135 locations within a 139 ha-forest catchment with granitic parent material and subordinately alluvial deposits, where soils classified as Typic Xerumbrepts and Ultic Haploxeralf crop out. A number of linear trend models coupled with different auxiliary variables were compared and the best one resulted the model using clay content as auxiliary variable. The improvement of estimation from using only LiDAR data (elevation) compared to the univariate (no trend) model was rather marginal.

In this article, a method for the moisture mapping of the soil surface of agrophytocenosis was proposed using neural network based on synchronized radar and multispectral optoelectronic data of Sentinel-1,2. To verify the developed method, data from two experimental plots were used. These plots were located two on irrigated soybean crops. The first of them was located on the right bank (1st plot) and the second one on the left bank (2nd plot) of the down part of Volga River. Two experimental soil moisture geo-datasets were done by measurements and geo-referencing points using gravimetric method (1st plot) and with proximal sensing method (2nd plot) using Soil Moisture Sensor ML3-KIT (THETAKIT, Delta). The soil moisture retrieval algorithm was based on the use of a neural network to predict reflection coefficient of an electromagnetic wave from the soil surface, followed by inversion into soil moisture using a dielectric model that takes into account the soil texture. The input parameter of the neural network was the ratio of the microwave radar vegetation index (calculated on the basis of Sentinel-1 data) to the index (calculated on the basis of data of multispectral optoelectronic channels 8 and 11 of Sentinel-2). Such way calculated index reveals showed a significantly greater dependence on soil moisture than on vegetation height that was been used in previous studies. The retrieved values of soil moisture were compared with the soil moisture measured in-situ. The proposed method with a determination coefficient of 0.44-0.65 and a standard deviation of 2.4%-4.2% for the 1st plot as well as with and of the same metrics for the 2nd allows predicting the soil moisture of both a test plots covered by soybean plants, relative to soil moisture measured in-situ. The conducted research created the scientific basis for a new technology for remote sensing the moisture content of the soil surface of agrophytocenosis as an element of the precision farming system and agroecology.

The three-dimensional structure of Gulf of Mexico’s warm-core rings, detaching from the Loop Current, is investigated using satellite altimetry and a large set of ARGO float profiles. Reconstruction of the Loop Current rings (LCRs) vertical structure from sea surface height observations is made possible by the use of the gravest empirical modes method (GEM). The GEMs are transfer functions that associate a value of temperature and salinity for each variable pair {dynamic height;pressure}, and are computed by estimating an empirical relationship between dynamic height and the vertical thermohaline structure of the ocean. Between 1993 and 2021, 40 LCRs were detected in the altimetry and their three-dimensional thermohaline structure was reconstructed, as well as a number of dynamically relevant variables (geostrophic and cyclogeostrophic velocity, relative vorticity, potential vorticity, available potential energy and kinetic energy density etc.). The structure of a typical LCR was computed by fitting an analytical stream function to the LCRs dynamic height signature and reconstructing its vertical structure with the GEM. The total heat and salt contents and energy of each LCR were computed and their cumulative effect on the Gulf of Mexico’s heat, salt and energy balance is discussed. We show that LCRs have a dramatic impact on these balances and estimate that residual surface heat fluxes of -13 Wm−2 are necessary to compensate their heat input, while the fresh water outflow of the Mississippi river approximately compensates for their salt excess input. An average energy dissipation of O[10−10−10−9] Wkg−1 would be necessary to balance their energy input.

(1) Background: Targeted (TT) and immune checkpoint inhibitor (ICI) therapies have become available in the routine care of metastatic melanoma in recent years. (2) Objective: We compared mortality in patients with metastatic melanoma and different systemic therapies. (3) Methods: A retrospective cohort study, based on pseudonymized health insurance data of about 2 million individuals from Saxony, Germany, was conducted for the years 2010 to 2020. Only patients with an advanced stage, i.e. distant metastases were considered for the main analysis. Relative survival since metastasis and predicted survivor curves derived from a Cox model were used to assess potential differences in mortality. (4) Results: Relative survival was highest in the subgroup with sequential use of ICI and TT. All treatments except interferon had significant hazard ratios (HR) in the Cox model with time-dependent effects indicating a protective effect after treatment initiation (HR 0.01-0.146) but decreasing over time (HR 1.351-2.310). The predicted survivor curves revealed best survival under ICI-TT treatment and worst survival under TT treatment alone. (5) Conclusions: We found real-world evidence for survival benefits of patients with metastatic melanoma who received sequential ICI and TT treatment. It is conceivable that the observed high survival differences were overestimated due to bias, such as confounding by indication.

The Apennine sector formed by Sannio and Irpinia is one of the most important seismic districts in Italy, representing a good case of study due to the plenty of recorded earthquakes that have therein occurred from Roman times up to nowadays. We have merged the historical record and the new satellite techniques that allow a precise determination of ground movements, and then derived physical dimensions like strain rate. In this way, we have verified that in Irpinia the hazard of new strong shocks forty years after one of the strongest known seismic events in the district is still high. This aspect must be considered very important from many points of view, particularly for Civil Protection plans, as well as civil engineering and urban planning development.

Forest fires are part of a set of natural disasters that have always affected regions of the world typically characterized by a tropical climate with long periods of drought. However, due to climate change in recent years, other regions of our planet have also been affected by this phenomenon, never seen before. One of them is certainly the Italian peninsula, and especially the regions of southern Italy. For this reason, the scientific community, as well as remote sensing one, is highly concerned in developing reliable techniques to provide useful support to the competent authorities. In particular, three specific tasks have been carried out in this work: (i) fire risk prevention, (ii) active fire detection, and (iii) post-fire area assessment. To accomplish these analyses, the capability of a set of spectral indices, derived from spaceborne remote sensing (RS) data, is assessed to monitor the forest fires. The spectral indices are obtained from Sentinel-2 multispectral images of the European Space Agency (ESA), which are free of charge and openly accessible. Moreover, the twin Sentinel-2 sensors allow to overcome some restrictions on time delivery and observation repeat time. The performance of the proposed analyses were assessed experimentally to monitor the forest fires occurred in two specific study areas during the summer of 2017: the volcano Vesuvius, near Naples, and the Lattari mountains, near Sorrento (both in Campania, Italy).

Dayaoshan, as an important metal ore producing area in China, is faced with the dilemma of resource depletion due to long-term exploitation. In this paper, remote sensing method is used to circle the favorable metallogenic areas and find new ore points for Gulong. Firstly, vegetation interference bas been removed by using mixed pixel decomposition method with hyperplane and genetic algorithm (GA) optimization; then, altered mineral distribution information has been extracted based on principal component analysis (PCA) and support vector machine (SVM) method; Thirdly, the favorable areas of gold mining in Gulong has been delineated by using ant colony algorithm (ACA) optimization SVM model to remove false altered minerals; Lastly, field survey verified that the extracted alteration mineralization information is correct and effective. The results show that the mineral alteration extraction method proposed in this paper has certain guiding significance for metallogenic prediction by remote sensing.

In this study, regression analyses were used to find a relationship between the rain gauge rainfall rate R and radar reflectivity Z for the urban catchment of the Służewiecki Stream in Warsaw, Poland. Rainfall totals for 18 events which were measured at two rainfall stations were used for these analyses. Various methods for determining calculational values of radar reflectivity in reference to specific rainfall cells with 1-km resolution within an event duration were applied. The influence of each of these methods on the Z-R relationship was analyzed. The correction coefficient for data from the SRI (Surface Rainfall Intensity) product was established, in which the values of rainfall rate are calculated based on parameters a and b determined by Marshall and Palmer. Relatively good agreement between measured and estimated rainfall totals for the analyzed events was obtained using the Z-R relationships as well as the correction coefficient determined in this study. Rainfall depths estimated from radar data for two selected events were used to simulate flow hydrographs in the catchment using the SWMM (Storm Water Management Model) hydrodynamic model. Different scenarios were applied to investigate the stream response to changes in rainfall depths, in which the data both for 2 existing as well as 64 virtual rain gauges assigned to appropriate rainfall cells in the catchment were included.

The workforce crisis of primary care is reflected in the increasing number of general medical practices (GMP) with vacant general practitioner (GP) position, and the GPs’ ageing. Our study aimed to describe the association between this crisis and premature mortality. Age-sex-standardized mortality for 18-64 years old adults were calculated for all Hungarian GMPs annually in the period from 2006 to 2014. The relationship of premature mortality with GPs’ age and vacant GP position were evaluated by standardized linear regression controlled for list size, urbanization, geographical location, clients’ education, and type of the GMP. The clients’ education was the strongest protective factor (beta=-0175; p<0.001), followed by urban residence (beta=-0.149; p<0.001), and the bigger list size (beta1601-2000=-0.054; p<0.001; beta2001-X=-0.096; p<0.001). The geographical localization influenced significantly also the risk. Although, GMP with a GP aged older than 65 years (beta=0; p=0.995) did not affected the risk, GP vacancy was associated with higher risk (beta=0.010; p=0.033), but the corresponding number of attributable cases was 23.54 for 9 years. The vacant GP position is associated with significant but hardly detectable increased risk of premature mortality without considerable public health importance. Nevertheless, employment of GPs aged more than 65 does not impose premature mortality risk elevation.

Accurate and stable cost forecasting of substation projects is of great significance to ensure the economic construction and sustainable operation of power engineering projects. In this paper, a forecasting model based on the improved least squares support vector machine (ILSSVM) optimized by wolf pack algorithm(WPA) is proposed to improve the accuracy and stability of the cost forecasting of substation projects. Firstly, the optimal features are selected through the data inconsistency rate (DIR), which helps reduce redundant input vectors. Secondly, the wolf pack algorithm is used to optimize the parameters of the improved least square support vector machine. Lastly, the cost forecasting method of WPA-DIR-ILSSVM is established. In this paper, 88 substation projects in different regions from 2015 to 2017 are chosen to conduct the training tests to verify the validity of the model. The results indicate that the new hybrid WPA-DIR-ILSSVM model presents better accuracy, robustness and generality in cost forecasting of substation projects.

Good data analysis is required for the optimal design of water resources projects. However, data are not regularly collected due to material or technical reasons, which results in incomplete-data problems. Available data and data length are of great importance to solve those problems. Various studies have been conducted on missing data treatment. This study used data from the flow observation stations on Yeşilırmak River in Turkey. In the first part of the study, models were generated and compared in order to complete missing data using ANFIS, multiple regression and Normal Ratio Method. In the second part of the study, the minimum number of data required for ANFIS models was determined using the optimum ANFIS model. Of all methods compared in this study, ANFIS models yielded the most accurate results. A 10-year training set was also found to be sufficient as a data set.

Background: The genetic variants identified by three large genome-wide association studies (GWAS) of educational attainment and the largest intelligence GWAS were used to test a polygenic selection model. Methods: Average frequencies of alleles with positive effect (polygenic scores or PS) were compared across populations (N=26) using data from 1000 Genomes. Factor analysis was used to extract a signal of polygenic selection. Results: A polygenic selection factor of educational attainment GWAS hits is high among a handful of SNPs within genomic regions replicated across GWAS publications and it is highly correlated to the genetic intelligence factor (r= 0.96). These factors are both highly predictive of average population IQ (r=0.9), and are robust to tests of spatial autocorrelation. Several Monte Carlo simulations yielded highly significant p values. Furthermore, the polygenic selection model shows high replicability, with the EA and intelligence factor scores being virtually identical to those from an older study (r=0.96-0.99). A larger sample of populations (N=53) produced similar results. Conclusion: This study shows robust results after accounting for spatial autocorrelation and Monte Carlo simulation using random SNPs and shows robust reproducibility of results from a previous study.

High-accuracy geolocation is crucial for high-resolution spaceborne SAR images. Most advanced SAR satellites have better theoretical geolocation accuracy than 1 meter but maybe unrealizable with less accurate external data, including the atmospheric parameters and the ground elevations. To investigate the actual SAR geolocation accuracy in common applications, we analyze the properties of different geolocation errors, propose a set of geolocation procedures, and conduct experiments on TerraSAR-X images and a pair of Tianhui-2 images. The results show that based on GNSS elevations, the geolocation accuracy is better than 1 meter for TerraSAR-X and 2 meters / 4 meters for the Tianhui-2 reference / secondary satellite. Based on the WorldDEM and the SRTM, an extra geolocation error of 2 and 4 meters will be introduced, respectively. By comparing the effectiveness of different tropospheric correction methods, we find that the GACOS mapping method has advantages in terms of resolution and computational efficiency. We conclude that the tropospheric error and the ground elevation error are the primary factors influencing the geolocation accuracy, and the key to improving accuracy is to use higher-accuracy DEMs. Additionally, we propose and validate a geolocation model for the Tianhui-2 secondary satellite.

This study sought to investigate the problem of losses along the milk value chain in Nandi and Kakamega Counties in Kenya. Using semi structured questionnaire, quantitative data were collected from different stages of the value chain consisting of 400 dairy farmers proportionally and randomly selected in Chesumei and Ikolomani sub counties; 15 cooperatives, 40 transporters, 20 milk bars, 17 supermarkets. Additionally Key informant interviews and focus group discussions we held with extension staff and farmers, respectively.The results showed losses occurred at all stages of the value chain in Nandi and Kakamega Counties with the highest losses at Cooperative (50.6%), collection centres (33.7%) and milk bars (7.5%). Annual milk loss was estimated to be 260,000 litres and 20,000 litres in Nandi and Kakamega counties respectively. The economic value of losses per year was estimated at KES 13 million (USD 100 000). Significant factors (P<0.001) influencing milk losses at farm level were: type of cow housing, level of training of milker, mixing morning and evening milk and Lack of cooling facilities. In cooperatives, poor roads, poor preservation of milk and mastitis influenced post harvest losses (PHL) causing milk rejection due to spoilages; while transporters attributed PHL to storage during transportation. Inadequate storage facilities and milk handling practices influenced PHL in milk bars while supermarkets attributed PHL to poor packaging materials and short shelf life. The most important causes of milk PHL along the chain were spoilages, spillages, adulteration and physical dirt. Key interventions to minimize PHL should target improvement of rural road infrastructure connecting farmers to markets; milk storage facilities and capacity building on milk handling practices for all actors. A sustainable PHL reduction should entail policy dialogue on milk payment system based on quality rather than quantity.

The physical properties of a structure such stiffness although can be determined by some statical tests, the identification of damping parameter requires a dynamic test. In general, both theoretical prediction and experimental identification of damping are quite difficult. There are many different techniques available for damping identification, and each method gives a different damping parameter. The dynamic indentation method, rheometry, atomic force microscopy, and resonant vibration tests are commonly used to identify the damping of materials, including soft materials. While the viscous damping ratio, loss factor, complex modulus and viscosity are quite common to describe damping of materials, there are also other parameters such as the specific damping capacity, loss angle, half-power bandwidth, and logarithmic decrement to describe damping of various materials. Often one of these parameters is measured in practical applications and the measured damping parameter needs to be converted into another damping parameter for comparison purposes. In this review, the theoretical derivations of different parameters for the description and quantification of damping and their relationships, and the methods for damping identification are presented. The expressions for both high damping and low damping are included and evaluated. This paper could be a primary resource for damping research and teaching.

In order to tackle the issue of severe rocking phenomenon under seismic conditions in structures equipped with steel spring isolation bearings, this paper investigates a novel type of anti-rocking bearing. Firstly, the structural configuration and working principle of the novel anti-rocking bearing are introduced, and a design method for bearing parameters is proposed. Secondly, a finite element analysis model is established using SAP2000 software to conduct nonlinear dynamic time history analysis under seismic loading. The analysis results show that the structural arrangement of the novel anti-rocking bearing reduces both the vertical displacement difference and the rocking angle of the isolation layer. The bearing exhibits a certain level of anti-rocking effect, but it may cause significant tensile forces in some bearings, necessitating the installation of anti-tensile reinforcement. The effectiveness of the anti-rocking effect improves as the stiffness of the steel tension rod in the bearing increases; however, it also leads to higher maximum tension in individual bearings as well as the total tension in all bearings. For structures equipped with the novel anti-rocking bearing, the acceleration amplifies under most cases, with amplification coefficients ranging from 0.82 to 1.55. The performance of the novel anti-rocking bearing varies significantly for different seismic waves. The stiffness of the steel tension rod should be determined considering the reference pressure of the bearing and the maximum designed tension of the bearing. Through the finite element simulation of the bearing, the mechanical properties of the bearing are basically the same as the theoretical analysis results. For the cylinder and the joint bearing, certain structural measures need to be taken to ensure its strength and stiffness.

The accompanying mechanical behavior during the flow of ore-rock dispersion is an important factor leading to the instability and failure of the orepass in the ore storage section. It is of great significance to accurately understand the instability characteristics of the well wall in the ore section, during the ore drawing process by understanding the flow characteristics and internal mechanical transfer mechanism of ore-rock dispersion. Using the discrete element method to analyze the flow characteristics, contact compactness, stress distribution characteristics and contact force probability distribution of the ore-rock dispersion, it realizes the quantitative characterization of the damage degree of ore-rock flow, and reveals the damage mechanism of mine storage wall. The results show that: (1) The friction between ore-rock particles, between ore-rock and well wall is an important reason for the change of the macroscopic flow form of ore-rock from “one” to “V” type. (2) The compactness and stress concentration of ores are increasing with the increase of storage depth, which is shown that with the increase of storage depth, the greater the probability of well wall instability. (3) The probability distribution of contact force strength between particles decreases exponentially in the whole process of ore drawing, in which the strong chain plays a major role in the stability of the dispersion system. (4) The number of overpressure and the overpressure coefficient can be used to quantitatively characterize the wall damage degree under the action of ore-rock flow. The dynamic side pressure decreases periodically in the form of exponential fluctuations, and the dynamic load formed by the ore-rock flow mainly played a role in the lower area of the ore storage section.

The fast decoding of low-density parity-check (LDPC) is crucial for its future applications. In this paper, we propose to use Early Termination (ET) and Force Convergence (FC) techniques to accelerate the decoding of two new local/global two-phases decoding algorithms to reduce the Globally Coupled (GC) LDPC codes. Specifically, ET is applied in the local decoding phase of two- phases decoding of GC-LDPC codes to skip the local decoding which is highly likely to fail and avoid the unnecessary iterations. FC is applied in global decoding phase where converged variable nodes are identified and removed from Tanner graph and the decoding can be speed up shrinking parity check matrices. Two variants are proposed for the ET operation in local decoding phase. ET-1 merely stops iteration if it meets the stopping criterion while in ET-1, the iteration number saved in local decoding is added up in global decoding to improve the decoding performance. The simulation results show that the ET-1-FC scheme can save up to 42% decoding time complexity in the low SNR region while keeping the error rate performance nearly unchanged, the ET-2-FC can improve the error rate performance by 0.18dB at bit error rate 0.001 or 0.23dB at frame error rate 0.1. In the waterfalling region of BER/FER curves, both schemes can save about 25% decoding time complexity.

This study focuses on the potential medicinal properties of Campsis radicans L. extracts and its aim is to investigate the antioxidant and antiproliferative effects of these extracts on the human colon adenocarcinoma cell line (HT-29). Cytotoxic activity in the HT-29 cell line was evaluated, and the 3-dimensional structures of phenolic compounds were obtained using the GC-MS method. Docking simulations were performed with AutoDock Vina, targeting proteins that are crucial in the apoptotic pathway (Bax, Bcl-2, and Caspase-3). Drug similarities and ADMET estimates of the phenolic compounds were obtained from databases. The highest antioxidant activity of Campsis radicans L. plant was observed in ethanol and water extracts, with notable inhibition capacities. While the total phenolic content was highest in ethanol, water, and ether extracts respectively the total flavonoid content was highest in ethanol, then ether, and water extracts. Certain elements were undetectable in mineral determination, and others exceeded the toxic doses for plants. The water extract exhibited dose-dependent cytotoxic activity in the HT-29 cell line, with an IC50 value of 4.47 mg/mL. Molecular docking results revealed the binding of phenolic molecules to the active sites of apoptotic pathway proteins. The findings suggest that Campsis radicans L. plant possesses cytotoxic properties, significant phenolic and flavonoid content, and a high antioxidant capacity. These properties make it a potential candidate for treatment use, emphasizing its potential therapeutic value in the HT-29 cell line. Further research and exploration on the identified phenolic compounds could contribute to the development of novel therapeutic agents.

Purpose: Pancreatic cancer (PAAD) is one of the most lethal malignancies. Immunotherapy is largely ineffective in PAAD. T-cell exhaustion contributes to the resistance for immunotherapies. We investigated the prognostic potential of T cell exhaustion-related genes (TEXGs). Methods: Single-cell RNA (scRNA) sequencing dataset from TISCH, and bulk sequencing datasets from TCGA and GTEx were applied to screen differently expressed TEXGs. Kaplan-Meier survival, LASSO regression, and Univariate/Multivariate Cox regression analysis were performed to construct TEXGs risk model. This model was used to predict the prognosis, tumor immune microenvironment, and immunotherapy response. PAAD cohorts from ICGC and GSE71729 datasets were used to validate this risk model. Pan-cancer expression of SPOCK2 was performed in TISCH database. Results: A six-gene (SPOCK2, MT1X, LIPH, RARRES3, EMP1, and MEG3) risk model was constructed. Low-risk PAAD patients had longer survival time in both training dataset (TCGA-PAAD, n=178) and validation datasets (ICGC-PACA-CA, ICGC-PAAD-US, and GSE71729, n=412). Multivariate Cox regression analysis demonstrated that the risk score was an independent prognostic variable for PAAD. High-risk patients correlated with cancer-related KEGG pathway enrichment, higher mutation frequency of KRAS and TP53 genes, and immunosuppressive status. Immunohistochemistry staining confirmed the changes of TEXGs in clinical samples. Moreover, pan-cancer scRNA sequencing datasets from TISCH analysis indicated that SPOCK2 might be a novel marker of exhausted CD8+ T cells. Conclusion: In conclusion, we established and validated a T cell exhaustion-related prognostic signature for PAAD patients. Moreover, our study suggests that SPOCK2 may be a novel marker of exhausted CD8+ T cells.

Keywords: olfactory rehabilitation; chronic pain; fMRI;

Diacylglycerol kinase (DGK) is a lipid kinase that phosphorylates diacylglycerol (DAG) to generate phosphatidic acid (PA). Based on converting one important signaling molecule (DAG) to another (PA), DGK plays an important role in plant responses to abiotic stress including waterlogging stress. However, no studies have been reported on the characterization of the DGK gene family in the waterlogging-tolerant kiwifruit germplasm, Actinidia valvata Dunn. Here, we identified 18 AvDGK genes in the A. valvata genome. The phylogenetic analysis showed that AvDGKs can be classified into three clusters, and members within the same cluster have similar domain distribution, exon-intron structures and conserved motif compositions. Chromosome localization analysis revealed that all the AvDGK genes are located across 18 different chromosomes. There were 29 duplicated gene pairs in kiwifruit and all had undergone purifying selection during evolution. Promoter cis-element analysis revealed that the cis-elements within AvDGK genes are associated with multiple functions, including phytohormone signal transduction, stress response, and plant growth and development. The expression pattern analyses indicated that AvDGK play an important role in the fruit development and plant response to waterlogging stress. AvDGKs gene family in the tetraploid A. valvata genome might promote PA synthesis and subsequent signal transduction both under short-term and long-term waterlogging stress. These results provide information regarding the structural characteristics and potential function of DGK genes within kiwifruit and lay a fundamental basis for further research into breeding for enhancing the kiwifruit’s tolerance to waterlogging stress.

A possible way to valorize citrus peels, which are byproducts of the juice extraction industry, is to use them as natural biopreservatives. In this paper we present early results from a compared Solvent Free Microwave Extraction (SFME) with Hydro-Distillation (HD) and Cold Pressing (CP) of essential oils (EOs) using fresh orange peel (Citrus sinensis L. var. Valencia late), a by-product in the production of orange juice in Algeria. The EOs were analyzed by gas chromatography coupled to mass spectrometry (GC-MS). All extracted C. sinensis EOs were chemotype limonene (94.64 to 95.48%). SFME is performed without added any solvent or water. SFME increases EO yield and eliminate wastewater treatment, resulting in a great progress in terms of time and cost efficiency. In its second part, the present study was conducted to evaluate “in vitro”, the antioxidant activities of Solvent Free Microwave (SFM) extracted orange EO by using the DPPH• (2,2-di-phenyl-1-picrilhydrazyl) free radical scavenging assay. The ability of orange EO to scavenge the free radical DPPH• was high, exceeding 80%. The result of the DPPH assay gives an IC₅₀ range value of 89.25 μg/mL (0.09 mg/mL) for the studied sample. Accordingly to the scientific literature, C. sinensis EO tested in the present study presented strong antioxidant activity, when looking to its values of AAI = 1.12 μg/mL. The feasibility of biopreservation used EOs as an alternative to synthetic techniques for liquid whole egg (LWE) stored under commercial retail conditions was investigated. The orange EO extracted by SFM was screened for its antibacterial and antioxidant activities in LWE at concentrations of 0.1, 0.3 and 0.5%. The TBA-RS results showed that the EO treatments significantly (p < 0.05) reduced the lipid oxidation in LWE. The long term oxidative, microbial and organoleptical stability of the LWE during display was positively influenced by orange EO treatments. Therefore, the results obtained here confirm that EO treatment as a promising technology to extend the commercial shelf-life of liquid egg products during retail/display.

Patients with inflammatory bowel diseases (IBD), including both ulcerative colitis (UC) and Crohn's disease (CD), are at a higher risk of developing colorectal cancer (CRC). However, advancements in endoscopic imaging techniques, integrated surveillance programs, and improved medical therapies have led to a decrease in the incidence of CRC among IBD patients. Currently, the management of patients with IBD who have a history of or ongoing active malignancy is an unmet need. This involves balancing the risk of cancer recurrence/progression with the potential exacerbation of IBD if the medications are discontinued. The objective of this review is to provide an updated summary of the epidemiology, causes, risk factors, and surveillance approaches for CRC in individuals with IBD, and to offer practical guidance on managing IBD patients with history of previous or active cancer.

Early childhood may be a stressful period for families with a significant impact on parents’ mental health and the child’s healthy development. The goal of the SKKIPPI cohort study was to assess the occurrence and determinants of psychosocial stress and mental health disorders in parents as well as in their offspring in early childhood in three German regions. Based on random samples from three residents' registration offices, parents with infants up to 12 months of age at the time of sampling, were invited to participate in the study. A screening online questionnaire was newly developed, available in four languages, to assess common psy-chosocial stressors and mental health problems of parents with small children. The study enrolled 4,984 mothers and 962 fathers. The most common potential psychosocial stressors at baseline were professional problems (mothers 22%, fathers 33%), lack of social sup-port (20%, 14%), and severe, negative experiences in childhood (22%, 16%). Obses-sive-compulsive thoughts (21%, 16%), depressive (9%, 9%) and anxiety symptoms (11%, 7%) were the most frequently reported mental health problems by both parents. Regulatory prob-lems of the child were reported by between 1.5% and 5.1% of parents. The SKKIPPI study showed that a substantial proportion of parents are burdened by psychoso-cial problems and suffer from mental health problems in the first years after birth. Early pre-ventive and low-threshold support measures should be available in the health and social care system. The newly developed questionnaire can be used to screen in the relevant populations in order to avoid disturbances in the mother-child attachment.

Background: Endovascular treatment of popliteal aneurysms (PA) has increased in the last few years, quickly becoming the main treatment in many vascular centers, based on the acceptable and promising outcomes reported in the literature. However, endograft infections are the most dangerous complication as a serious local compromise and usually require open surgical conversion and device explantation to preserve the affected extremity. Case report: We reported two patients admitted to the emergency room for pain and edema in the lower leg. Both patients have undergone exclusion of ruptured PA a few years before by endovascular graft. CTA showed a significant volume of fluid-corpuscular collection related to perianeurysmal abscess collection in both cases. Blood cultures and drained material cultures were positive for Staphylococcus Capitis in the first case and S. Aureus in the second. The antibiotics prophylaxis was performed for 10 days, then, patients underwent an open surgical conversion with a complete explantation of endovascular material and a femoro-popliteal bypass using an autologous vein in the first case and biological bovine pericardium prosthesis in the other case. Furthermore, we have questioned the literature and found eight more cases described in case report article referred to popliteal graft infections by different microorganisms, mostly presenting acute limb ischemia as the first symptom and suggesting endograft explantation with open conversion and autologous vein bypass as the commonest therapeutic choice. Conclusions: Open surgical conversion of popliteal endograft infection is the best strategy to manage peripheral infection of the popliteal stent.

Abstract: Congenital hyperinsulinism (CHI) is a rare disorder of glucose metabolism and is the most common cause of severe and persistent hypoglycemia (hyperinsulinemic hypoglycemia, HH) in the neonatal period and childhood. Most cases are caused by mutations in the ABCC8 and KCNJ11 genes that encode the ATP-sensitive potassium channel (KATP). We present the correlation between genetic heterogeneity and the variable phenotype in patients with early-onset hyperinsulinemic hypoglycemia caused by ABCC8 gene mutations. In the first patients, which presented persistent severe hypoglycemia since the first day of life, molecular genetic testing revealed the presence of a homozygous mutation in the ABCC8 gene [deletion in the ABCC8 gene c.(2390+1_2391-1)_(3329+1_3330- 1)del] correlated with a diffuse form of hyperinsulinism (the parents being healthy heterozygous carriers). In the second patient, the onset was on the third day of life with severe hypoglycemia, and genetic testing identified a heterozygous mutation in the ABCC8 gene c.1792C&gt;T (p.Arg598*) inherited on the paternal line, which led to the diagnosis of focal form of hyperinsulinism. To locate the focal lesions, (18)F-DOPA (3,4-dihydroxy-6-[18F]fluoro-L-phenylalanine) PET/CT was recommended (an investigation that cannot be carried out in the country), but the parents refused to carry out the investigation abroad. In this case, early surgical treatment could have been curative. In addition, the second child also presented secondary adrenal insufficiency requiring replacement therapy. At the same time, she developed early recurrent seizures that required antiepileptic treatment. We emphasize the importance and of molecular genetic testing for diagnosis, management and genetic counseling in patients with HH.

This is a single tertiary center in southwest Romania, population-based, study. We retrospectively compared data obtained in two periods: January 2008 - December 2013 and January 2018 - De-cember 2023, respectively. The global incidence of transposition of great arteries (TGA) - the ter-minated cases added to the ones resulting in live-born pregnancies, remained almost constant. The live-born incidence of TGA decreased (0.34% to 0.013%). The prenatal detection rate increased slightly (71.42% to 87.5%). The median gestational age at the diagnosis decreased, from 29.3 ges-tational weeks (mean 25.4) to 13.4 weeks (mean 17.2). The proportion of terminated pregnancies significantly increased (14.28% to 75%, p = 0.019).

The epidemic of obesity has increased worldwide and is associated with comorbidities as diabetes as cardiovascular disease. Strategies that modulate body weight and improves glycemic metabolism has increased, and the bariatric surgeries as Sleeve Gastrectomy (SG) has been highlighted in obesity treatment. However, the mechanism by which SG reduces body weight and improves glycemic control are unknow. C57BL mice were submitted to a 10 weeks high fat-diet protocol and submitted to SG. Food intake, fed/fasted glycemia and hypothalamic anorexigenic and orexigenic gene expression were evaluated. SG reduces body weight, fasting glycemia, insulinemia and leptinemia in obese mice. Moreover, SG reduces food and total calorie intake with no alterations in the expression of anorexigenic and orexigenic gene expression. These data indicates that SG improves obesity associated alterations, at least in part, by reduction on food intake. This effect is not associated with the classic food intake pathway in hypothalamus, indicating the involvement of supplementary pathways in this process.

Abstract: In this paper we describe how the administration of drone brood homoge-nate (DBH) influenced intestinal secretion of IgA, MUC-2, morphometric parameters, peripheral blood values, and expression of cytokines. A total of 12 pigs were divided into three groups, two experimental, first fed with 100 mg DBH.kg-1 (E1), second with 200 mg DBH.kg-1 (E2) of body weight, and a control (C) group without DBH in the di-et. Animals didn't show significant changes in average weight gains and feed conver-sion among evaluated groups. Feeding a diet containing 200 mg DBH.kg-1 of body weight in the E2 group produced an increase (p < 0.05) in the red cell distribution width, the percentage of metabolic activity of blood phagocytes in the peripheral blood, as well as splenic cell subpopulations CD4+ and CD21+. The villi height and their cutting surface were increased in the E2 group (p < 0.01), together with a gradual decrease in the concentration of MUC-2 and sIgA (p < 0.001). Upregulation of IL-8 (p < 0.0001), IL-10 (p < 0.05), and IL-18 (p < 0.001) was found mainly in E2 group. Results suggest, that supplementation of DBH in the feed of pigs formed optimal intestinal homeostasis.drone

Lynch syndrome (LS) is an inherited cancer predisposition disorder associated with an elevated risk of various epithelial cancers. Despite sharing the same pathogenic variant (PV), Lynch syn-drome variant heterozygotes (LSVH) exhibit considerable phenotypic variability in cancer risk. The role of Human Leukocyte Antigen (HLA) in modifying cancer risk prompted our investiga-tion into whether HLA variations act as genetic modifiers influencing age at cancer diagnosis in a unique cohort of LSVH carrying a PV in the hMLH1 gene in South Africa. Within our extensive LS cohort, 426 individuals carried the same hMLH1 PV (MLH1:c.1528C>T). We selected 100 indi-viduals with the greatest diversity in age at cancer diagnosis and the oldest unaffected individu-als for high-throughput HLA genotyping of 12 HLA class I and II loci using next-generation se-quencing. Statistical analyses employed Kaplan-Meier survival analyses with Logrank tests and Cox proportional hazards. Following the robust application of statistical correction methods, six HLA alleles (3.2%) were significantly associated with a young age at cancer diagnosis. Notably, HLA-B*15:17 and HLA-DPB1*55:01 correlated significantly with very young colorectal cancer (CRC) diagnosis (Mean age: 21y [17-25]; HR = 71.59; q

Water quality assessment in pastoral of Tibetan Plateau, which is water sources for about 40% of world's population and the runoff-yield area of Yellow rivers, is very important. In this paper, Xiahe county which belongs to Tibetan Plateau pastoral was investigated. Six parameters(via, chloride, COD, ammonia nitrogen, nitrate, fluoride, sulfate) were selected to assess the water quality and health degree by using fuzzy comprehensive evaluation methods. The hydrochemical type in surface water was of HCO3--Mg2+-Ca2+ type. The cations and anions in surface water were mainly from weathering and dissolution of carbonate rock. Results showed that the water quality in all 69 sampling sites was all of class Ⅰ. The integrated health degree reached more than 0.85 and the health rate were 100%. Although ammonia nitrogen was regarded as the main contamination factor, but it had a little effect on the entire body of water. Overall, the surface water qualities of most samples in Xiahe County was good condition.

Food insecurity remains a significant developmental challenge, particularly in rural areas, despite ongoing efforts to mitigate it. To better understand the persistence of this issue, this study investigates the causes of household food insecurity and the coping strategies employed by households in Zorkor Goo, Zorkor Kanga, and Zorkor Kadaare communities within the Bongo District of Ghana’s Upper East Region. A descriptive cross-sectional survey was conducted, sampling 196 households systematically from these communities. Data were collected through a structured questionnaire covering socio-demographic factors, causes of food insecurity, household coping strategies, and dietary intake. The analysis was performed using SPSS (Version 21.0), with food security status and dietary intake assessed via the FANTA Household Food Insecurity Access Scale (HFIAS) and Food Consumption Score, respectively. The study identified key factors contributing to food insecurity, including soil infertility, poor rainfall patterns, food spoilage, extravagant funerals, large family size, high unemployment, and lack of education. Major coping strategies among households included meal skipping, reducing meal size and frequency, migration, asset sales, and basket weaving. The findings revealed that 96.4% of households were severely food insecure, and over two-thirds (67.3%) exhibited poor dietary consumption. Notably, household employment levels, education, and food consumption scores were significantly associated with food insecurity (P&lt;0.001). These findings underscore the need for targeted interventions addressing the root causes of food insecurity and enhancing household resilience in these communities.

This study investigates the possibility of using machine learning models created in DeepLabCut and Create ML to automate aspects of behavioral coding and aid in behavioral analysis. Two models with different capabilities and complexities were constructed and compared to a manually observed control period. The accuracy of the models was assessed before being applied to 7 nights of footage of the nocturnal behavior of two African elephants (Loxodonta africana). The resulting data was used to draw conclusions regarding behavioral differences between the two elephants and between individually observed nights, thus proving that such models can aid researchers in be-havioral analysis. The models were capable of tracking simple behaviors with high accuracy, but had certain limitations regarding detection of complex behaviors, such as the stereotyped behavior sway, and displayed confusion when deciding between visually similar behaviors. Further expansion of such models may be desired to create a more capable aid with the possibility of automating behavioral coding.

In recent years, due to the detrimental impact of traditional gas-liquid refrigerants on the environment, the pursuit of solid-state refrigeration technology based on elastocaloric effect, as a promising sustainable alternative, has been promoted. However, the traditional trial-and-error method is inefficient and difficult to meet the material application requirements. In this work, machine learning (ML) was employed to accelerate the development of NiTi-based shape memory alloy (SMA) with excellent elastocaloric effect. By means of active learning, we identified 9 novel NiTi-based SMAs in four iterations, the phase transformation-induced entropy change (ΔS) of which are as high as over 90 J/kg·K-1. Moreover, the model exhibits good interpretability, allowing us to understand the relevance between the target and features from the aspect of mechanism.

This paper presents design and optimization of a small-size electromagnetic induction heating control system powered by a 3.7V-900mAh lithium battery and featuring an LC series resonant full bridge inverter circuit, which can be used in small size materials heating applications, such as micro medical devices. The effects of resonant capacitance, inductor wire diameter, heating tube material and wall thickness are studied to maximize the heating rate of the workpiece and meantime reduce the temperature rise of the NMOS transistor. The optimal circuit configuration meeting the design requirements was finally identified via comparing the operational parameters and NMOS transistor loss under different circuit conditions. The validation experiments were conducted on a designed electromagnetic induction smoking devices. The results indicate that under an output current of 4.6A, the heating tube can reach up to the temperature target of 250℃ within 11 seconds, and all NMOS transistors stay below 50°C in a 5 minutes heating process.

This study explores the current landscape of social value (SV) research in the construction industry, analyzing global trends and identifying future research directions. Using bibliometric analysis, research published in Elsevier Scopus database from 2013 to 2023 was extracted using the keywords "social value" AND "construction industry." Results indicate a focus on social value indicators, socioeconomic impacts, project management, innovative practices, and cross-sector collaborations. The study also reveals a lack of attention to SV in African countries' construction sectors. By highlighting research areas and identifying gaps, this study contributes to academic literature, suggesting the need for guidelines, particularly in developing countries, and advocating for further research on SV in the built environment and strategies for global social value creation.

The study findings revealed significant variability in various wood properties among different genetic families, although the static modulus of elasticity did not exhibit significant differences between the chosen genetic families. All measured wood properties decreased from the bottom to the top of the model trees. Wood hardness displayed a moderately negative correlation with wood density and weak correlations with MOE and MOR. Given the weak correlations between wood hardness and other wood mechanical properties, it is suggested that the MOEdyn would be a more suitable trait for genetic studies.

A dioxomolybdenum catalyst [(MoO2Cl2-O-MoO2Cl2)(L)] (1) (with L (1S,2S)-N,N´-bis(2-pyridinecarboxamide)-1,2-cyclohexane) was prepared and used as catalyst for the desulfurization of a multicomponent model fuel containing the most refractory sulfur compounds in real fuels. This complex showed to have a high efficiency to oxidize the aromatic benzothiophene derivative compounds present in fuels, mainly using a biphasic 1:1 model fuel/MeOH system. This process conciliates catalytic oxidative and extractive desulfurization, occurring the oxidation of the sulfur compounds in the polar organic solvent. The oxidative catalytic performance of (1) showed to be influenced by the presence of water in the system. Using 50% aq. H2O2 it was possible to reuse the catalyst and the extraction solvent MeOH during ten consecutive cycles without loss of desulfurization efficiency.

Revealing the spatial distribution mechanism of the coupling effect between soil water and salt is essential for managing saline-alkali farmland. This study utilized the multifractal method to analyze soil water and salt under varying water content levels in arid saline-alkali farmland. Soil samples were collected on the second (S1), fifth (S2), eighth (S3), eleventh (S4), and fourteenth (S5) days after a rainfall event. The findings showed that a significant decrease in soil water content, contrasting with an increase in soil salt content throughout the soil layers post-rainfall. As water content decreased, the spatial variability of soil water initially increased from S1-3 and then decreased, while the spatial variability of soil salt decreased. The spatial distribution between soil water and salt exhibited a high correlation at S3-4 (with relative water content of soil ranging from 0.52 to 0.75) due to their coupling effect. However, soil salt was unevenly leached by rainfall at high water content levels (S1-2) and precipitated at low water content levels (S5), resulting in low spatial variability correlations between soil water and salt. This study elucidated the coupling process of soil water and salt, identifying their spatiotemporal distribution mechanism in dryland agricultural areas.

Despite the partial disclosure of driving scenario knowledge graphs, they still fail to meet the comprehensive needs of intelligent connected vehicles for driving knowledge. Current issues include the high complexity of pattern layer construction, insufficient accuracy of information extraction and fusion, and limited performance of knowledge reasoning models. To address these challenges, a hybrid knowledge graph method was adopted in the construction of the Driving Scenario Knowledge Graph (DSKG). Firstly, core concepts in the field were systematically sorted and classified, laying the foundation for the construction of a multi-level classified knowledge graph top-level ontology. Subsequently, by deeply exploring and analyzing the Traffic Genome data, 34 entities and 51 relations were extracted and integrated with the ontology layer, achieving the expansion and updating of the knowledge graph. Then, in terms of knowledge reasoning models, an analysis of the training results of the TransE, Complex, Distmult, and Rotate models in the entity linking prediction task of DSKG revealed that the Distmult model performed the best in metrics such as hit rate, making it more suitable for inference in DSKG. Finally, a standardized and widely applicable Driving Scenario Knowledge Graph was proposed. The DSKG and related materials have been publicly released for use by industry and academia.

Elevated serum uric acid (sUA) is associated with risk of developing cardiovascular disease (CVD). Here, we examined the prognostic significance of sUA and exercise capacity in 411 Japanese adults (age, ≥65; mean, 81 years) hospitalized for worsening CVD. Mean sUA was significantly higher in the 23% of patients on an sUA-lowering agent than in those not. When the patients were stratified by sUA into three groups (7.0 mg/dL), the high sUA group had significantly worse peak VO2 and composite endpoint (rehospitalization due to worsening CVD and all-cause mortality) compared with low and moderate sUA groups (P < 0.001). When the patients were stratified by sUA into five groups (sUA 10.0 mg/dL), the incidence of the composite endpoint was significantly higher in the highest sUA group compared with that in the reference group, but only in women. Univariate Cox regression analysis, but not a multivariate analysis, indicated that sUA was significantly associated with the composite endpoint. Although sUA and exercise capacity may have some degree of prognostic significance in older patients with CVD, this significance may differ between men and women.

Aflatoxin M1 (AFM1), a carcinogenic toxin, mainly contaminates cow milk and poses significant challenges to the dairy industry and, thereby, public health in most tropical countries, including Ethiopia. This study aimed to investigate the prevalence and level of AFM1 in raw cow milk collected from Specialized Dairy Farms and Milk Vendors in three Urban Centers: Chiro town, Dire Dawa, and Harar cities in Eastern Ethiopia. 180 milk samples were collected from two major Milk Sources: Specialized Dairy Farms (N=90) and Milk Vendors (N=90) using a simple random sampling technique. AFM1 was analyzed using high-performance liquid chromatography. The study revealed that, 63.9% (115/810) prevalence and 0.179±0.48µg/L mean of AFM1 level in milk, which 39.13% and 26.08% exceed the tolerable limits of EU and FDA respectively. A 40.0% prevalence and 0.344±0.72µg/L average of AFM1 in the milk from Dire Dawa city was significantly higher than the samples from other Urban Centers. However, 30.43% and 29.57% prevalence as well as 0.055±±0.13µg/L and 0.140±0.33µg/L average of AFM1 in milk from Chiro town and Harar city, respectively were not significant. Furthermore, milk samples from Dairy Farms revealed a higher prevalence (57.39%) and level (0.252±0.64µg/L) of AFM1 than Milk Vendors, with a prevalence of 42.61% and an average of 0.107±0.21µg/L. Therefore, this study concludes that substantial milk samples were contaminated by AFM1 and urges the need to enhance farmers' awareness on mitigation.

The influence of growth temperature on the crystalline quality and optical properties of AlGaN at 325 nm, grown using plasma-assisted molecular beam epitaxy (MBE), was investigated. The growth temperature exhibited a significant impact on the growth mode and surface morphology. Specifically, at a growth temperature of 750 degrees Celsius, when appropriate Al and Ga flow rates were employed, the AlGaN layer exhibited exceptional surface morphology and favorable optical properties. The optical properties of the AlGaN material were explored, revealing the presence of two distinct non-radiative recombination centers characterized by different activation energies. The minority carrier lifetimes were measured as 560 ps at 10 K and 64 ps at room temperature. The underlying mechanism was analyzed from the perspective of carrier dynamics, shedding light on the observed phenomena.

Pretreatment of cells with proteolysis inhibitors diminished intensity and changed shape of DNICs specific EPR signal in a treatment time-dependent manner. The level of DNIC formation was significantly influenced by the presence of protein degradation products. Interestingly, formation of HMWDNICs depended on the availability of LMWDNICs. The extent of glutathione involvement in the in vivo formation of DNICs is minor yet noticeable, aligning with our prior research findings.

Herein, we present the design technique of a resonant rectifier for piezoelectric (PE) energy harvesting. We propose two diode equivalents to reduce the voltage drop in the rectifier operation, a minuscule-drop-diode equivalent (MDDE) and a low-drop-diode equivalent (LDDE). The diode equivalents are embedded in resonant rectifier integrated circuits (ICs), which use symmetric bias-flip to reduce the power wasted for charging and discharging the internal capacitance of a PE transducer. The self-startup function is supported by synchronously generating control pulses for the bias-flip from the PE transducer. Two resonant rectifier ICs, using both MDDE and LDDE, are fabricated in a 0.18 μm CMOS process and their performances are characterized under external and self-power conditions. Under the external-power condition, the rectifier using LDDE delivers an output power POUT of 564 μW and a rectifier output voltage VRECT of 3.36 V with a power conversion efficiency (PCE) of 90.1%. Under self-power conditions, the rectifier using MDDE delivers a POUT of 288 μW and a VRECT of 2.4 V with a corresponding PCE of 74.6%. The result shows that the power extraction capability of the proposed rectifier is 5.9 and 3.0 times higher than that of a conventional full-bridge rectifier.

Proteomics research has become one of the most important topics in the fields of life science and natural science. At present, research on protein–protein interaction networks (PPINs) mainly focuses on detecting protein complexes or function modules. However, existing approaches are either ineffective or incomplete. In this paper, we investigate function module detection mechanisms in PPIN, including open databases, existing detection algorithms and recent solutions. After that, we describe the proposed solution based on simplified swarm optimization (SSO) algorithm and gene ontology knowledge. The proposed solution implements SSO algorithm for clustering proteins with similar function, and imports biological gene ontology knowledge for further identifying function complexes and improving detection accuracy. Furthermore, we use four different categories of species dataset for experiment: Fruitfly, Mouse, Scere, and Human. The testing and analysis result show that the proposed solution is feasible, efficient and could achieve a higher accuracy of prediction than existing approaches.

Child labor remains a predominant issue in Pakistan, despite the country’s existing policies and frameworks aimed at abolishing it. Through this study, we investigated the child labor distribution across Sindh and examined the factors that shape the regional patterns. We analyzed the data available through the 2018-19 Sindh Multiple Indicator Cluster Surveys, MICS 6, from 20,030 households with 40,633 children in the 5-17 age bracket. By applying prevalence statistics, chi-square tests, and regression modeling to these data, we investigated the trends in child labor prevalence, identified the correlation between child labor and various socioeconomic and geodemographic variables, and finally mapped the geospatial patterns of child labor across districts in Sindh, enabling us to identify and prioritize the districts in need of immediate intervention. The findings revealed that about 20 percent of the children in Sindh are engaged in child labor, with a high prevalence among males and in the 15-17 age bracket. Moreover, poverty and rural dwellings raise this issue. Other socioeconomic and geographic factors reinforcing this issue are lack of education among children, mothers or caretakers, and mothers’ or caretakers’ functional difficulties. However, children’s functional difficulties lower their prevalence in labor. Among the 29 districts across Sindh, Kambar Shahdadkot has the highest prevalence of child labor.

High-resolution (2 km) high-frequency (hourly) SST data from 2015-2021 provided by the Advanced Himawari Imager (AHI) onboard the Japanese Himawari-8 geostationary satellite were used to study spatial and temporal variability of the China Coastal Front (CCF) in the South China Sea. The hourly SST data were processed with the Belkin and O’Reilly (2009) algorithm to generate long-term mean monthly maps of SST gradient magnitude (GM) and frontal frequency (FM). The horizontal structure of CCF was investigated from cross-frontal distributions of SST along 11 fixed lines that allowed to determine inshore and offshore boundaries of the CCF and calculate the CCF strength defined as the total cross-frontal step dSST = Offshore SST – Inshore SST. Combined with the results of Part1 of this study (Belkin, Lou, Yin, 2023), where the CCF was documented in the East China Sea, the new results reported in this paper allowed the CCF to be reliably traced from the East China Sea via Taiwan Strait into the northern South China Sea and farther west up to the east coast of Hainan Island.

Clostridial infections in cattle are a significant concern for Brazilian livestock. These diseases are caused by various species of Clostridium, which are known for their ability to produce potent toxins. Botulism in cattle is a serious and often fatal condition caused by the ingestion of neurotoxins produced by C. botulinum. This bacterium thrives in decomposing organic matter, such as spoiled feed, carcasses, and contaminated water. Tetanus while less common, tetanus is a serious disease following contamination of wounds with Clostridium tetani spores. It results in muscle stiffness, spasms, and often death due to respiratory failure. Blackleg (C. chauvoei) is this disease primarily affects young cattle, leading to acute lameness, swelling, and high fever. Malignant edema (C. septicum and others) is characterized by rapid onset of swelling at wound sites, malignant edema can occur after injuries or surgical procedures. Enterotoxemia is triggered by the rapid growth of C. perfringens in the gut following excessive carbohydrate intake. This leads to toxin production that causing sudden death. In conclusion, clostridial bovine infections remain a persistent challenge for Brazilian cattle farmers. With continued focus on vaccination, good management practices, and research, the impact of these diseases can be minimized, safeguarding the livestock industry's economic viability.

This study explores the optimization of the admission process at the Escuela Colombiana de Ingeniería Julio Garavito through data anal- ysis. By integrating advanced tools like Power BI, Python Flask, and data mining techniques, a model has been developed to improve student selection and retention, enabling more informed and effective decisions. The results indicate that applying data science not only facilitates efficient data management but also promotes more inclusive and equitable educational poli- cies. This pioneering approach in the field of higher education in Colombia offers a frame- work for future research and technological de- velopments, highlighting the vital importance of data science in improving educational and administrative processes.

A thorough understanding of the type and severity of cataracts is crucial for accurately estimating the optimal phacoemulsification energy. In preceding research efforts, an innovative clinical prototype known as the Eye Scan Ultrasound System (ESUS) was developed to facilitate the automated characterization of cataracts. To evaluate the effectiveness of the prototype as a medical tool, extensive data must be collected from several patients with and without cataracts. However, obtaining an adequate number of patients and data for training and testing machine learning models is challenging. To overcome this limitation, the authors implemented a simulated prototype model of the ESUS system, to augment the data. The proposed model encompasses the electric-to-acoustic signal conversion in the ultrasonic transducer, the wave propagation through the eye, and the subsequent acoustic-to-electric signal conversion. Electrical modelling of the transducer was done using a two-port network and the wave propagation was modelled by using the k-Wave MATLAB toolbox. This holistic modelling approach enabled the generation of synthetic data augmentation, presenting great similarity with real data. The synthetic data can then be employed together with real data for the purpose of cataract classification.

The integration of supply chain data analytics with marketing strategies has become increasingly critical for organizations seeking to enhance customer insights and competitive advantage in today's dynamic business environment. This qualitative research explores the intersection of these two disciplines, focusing on implementation strategies, benefits, challenges, and future directions. Through semi-structured interviews with industry experts and stakeholders, key themes emerged, highlighting the importance of cross-functional collaboration, technological integration, and robust data governance in achieving effective integration. The study identifies significant benefits, including enhanced customer insights, improved operational efficiencies, and competitive advantage through personalized marketing strategies and optimized supply chain management. However, challenges such as data silos, technological complexities, and regulatory compliance issues pose barriers that require strategic solutions and organizational commitment. Future directions point towards the continued evolution of predictive analytics, AI-driven solutions, and sustainability integration, shaping the future landscape of supply chain management and marketing. Proactive engagement with regulatory frameworks and ethical considerations will be crucial in navigating these challenges and building trust with consumers. Ultimately, this research contributes to a deeper understanding of how organizations can leverage data analytics to drive strategic decision-making, enhance customer relationships, and achieve sustainable growth in an increasingly data-driven economy.

In the context of the Korean building structure standard KDS2022, wind loads can be readily calculated in terms of the along-wind, across-wind, and torsional components, based on a single wind direction. However, this approach falls short in accurately and safely evaluating the impact of winds from various directions. Therefore, in this study, we developed a Wind Load Calculation Program (WCP) capable of predicting wind loads with relative precision during the preliminary design phase. First, wind tunnel tests were conducted to identify the essential factors necessary for calculating wind loads and the variables influencing these factors. The building shape considered was a square, and the wind force coefficients and power spectral density were measured by combining 4 ground roughness values, 11 side ratios (), 4 aspect ratios (), and wind directions ranging from 0° to 90°. Subsequently, a generalized formulation was devised to facilitate wind load calculations across diverse conditions and a method for calculating load combination coefficients, considering response correlation and load simultaneity, was presented. Finally, the wind loads obtained from the wind tunnel tests were compared with those predicted by the WCP using an actual project model.

The distribution and variation of top-of-atmosphere longwave cloud radiative forcing (LCRFTOA) has drawn a significant amout of attention due to its importance in understanding the energy budget. Advancements in sensor and data processing technology, as well as a new generation of geostationary satellites, such as the FengYun-4A (FY-4A), allow for high spatial resolutions that are crucial for real-time radiation monitoring. Nevertheless, there is a distinct lack of official top-of-atmosphere outgoing longwave radiation products under clear-sky conditions (OLRclear). Consequently, this study addresses the challenge of constructing LCRFTOA data with high spatiotemporal resolution over the full disk region of FY-4A. After simulating the influence of atmospheric parameters on OLRclear based on SBDART radiation transfer model (RTM), we developed a model for estimating OLRclear using infrared channels from the advanced geosynchronous radiation imager (AGRI) onboard the FY-4A satellite. The OLRclear results showed an RMSE of 5.05 W/m2 and MBE of 1.59 W/m2 compared to ERA5. Besides, the calculated LCRFTOA results were validated against instantaneous, daily average, and monthly average ERA5 and CERES LCRFTOA products, supporting the validity of the algorithm proposed in this paper. Finally, the changes in LCRFTOA due to variaty cloud heights (high, medium, and low cloud) were analyzed. This study provides the basis for comprehensive studies on the characteristics of top-of atmosphere radiation.

This paper presents a groundbreaking approach to real-time image processing in electronic component assembly, enhancing quality control in manufacturing. By capturing images from pick and place machines between component pickup and mounting, defects are identified and addressed in-line, significantly reducing the likelihood of defective products. Leveraging fast network protocols like gRPC and orchestration with Kubernetes, along with C++ programming and TensorFlow, this method achieves an average turnaround time of less than 5 milliseconds. Tested on 20 live production machines, it ensures compliance with IPC-A-610, and IPC-STD-J-001 standards while optimizing production efficiency and reliability.

Selection of the most suitable material is one of the key decisions to be taken at the design stage of a manufacturing process. Traditional approaches as Ashby maps based on material properties are widely used in the industry. However, in the production of multimaterial components, the criteria for the selection can include antagonistic approaches. The aim of this work is the implementation of a methodology based on the results of process simulations for several materials and classify them by applying an advanced data analytics method based on Machine Learning (ML), in this case the Support Vector Regression (SVR) and Multi-Criteria Decision Making (MCDM) methodolo-gies, in this case Multi-criteria Optimization and Compromise Solution (VIKOR) combined with Entropy weighting methods. In order to do this, a Finite Element Model (FEM) has been built to evaluate the extrusion force and the die wear in a multi-material co-extrusion process of bimetallic Ti6Al4V-AZ31B billets. After applying SVR and VIKOR combined with Entropy weighting methodologies, a comparison has been established based on the material selection and complexity of the methodology used, resulting that material chosen in both methodologies is very similar and MCDM method is easier to implement because there is no need of evaluate the error of the pre-diction model and the time for data preprocessing is less than the time needed in SVR.

Glaciers in northern Pakistan are a prime source of fresh water, providing headwater in the Indus River System and serving as a lifeline to millions of people in the region. These glaciers undergo continuous changes by melting due to global warming or accumulation due to snowfall/precipitation at higher altitudes. In this study, we used remote sensing data to quantify glacier changes in spatiotemporal variability in the past three decades. Five glaciers in the Gilgit region (near the junction of the Hindukush and Karakoram Mountains) with an extent of less than 5 square kilometers were selected, namely Phakor glacier, Karamber glacier, East Gammu glacier, Bhort glacier, and Bad-e-Swat glacier. The fluctuations in these glaciers were monitored using a digital elevation model (DEM) and a cloud-free continuous series of Landsat satellite pictures from the minimal snow cover season. The annual climatic trends were studied through spatially interpolated gridded climate data WοrldClim version-1 climate database for 1970 – 2000. We used it to study the variations of minimum and maximum temperature, solar radiation, and precipitation by preparing sub-sets from the original global grids. The temporal assessment of Bhort, Bad-e-Sawat, East Gammu, Karamber, and other rivers was also carried out. It is observed that the glaciers in the Gilgit watershed are rather stable. The little variability of glaciers is due to their geographic condition, altitude, topography, and orientation. The mapped glacier classes have been validated to check the accuracy assessment through an error matrix method. The kappa coefficient from the error matrix has been calculated to be 84 %. The study makes a critical input to a greater understanding of watershed controlling and hydrological processes in the upper Indus catchment's Gilgit watershed.

In the present work, a methodology for wind field reconstruction based on the Meteo Particle Model (MPM) from Numerical Weather Prediction (NWP) data is presented. The development of specific wind forecast services is a challenging research topic, in particular for what concerns the availability of accurate local weather forecasts in highly populated areas. Currently, even if NWP Limited Area Models (LAMs) are run at spatial resolution of about 1 km, this level of information is not sufficient for many applications, for example to support drone operation in urban contexts. The coupling of MPM with the NWP Limited Area Model COSMO has been implemented in such a way that the MPM reads the NWP output over a selected area and provides wind values in the generical point considered for the investigation. The numerical results obtained reveal a good behavior of the method in reproducing the general trend of wind speed, as confirmed also by the power spectra analysis. The MPM is able to step over the intrinsic limitations of the NWP model in terms of spatial and temporal resolution even if the MPM inherits the bias that inevitably affects the COSMO output.

Urbanization triggers the emergence of slums in urban areas. Palembang is one of the Indonesian cities with slum settlements. This research aimed to analyze the interpolation of slum positions in Palembang and their distribution pattern using kernel density analysis and by modeling spatial data on accuracy values. It employed a quantitative method with a survey approach. Samples were selected using proportional random sampling from families in 64 slum areas across the 13 districts in the city, and their positions were recorded with a GPS device and then processed and mapped in ArcGIS. The data were analyzed with inverse distance weighted, kernel density, and spatial data modeling. Results showed that slum areas near the riverbanks had high population density, while those located further were lower. The values obtained from the kernel density analysis varied from 0 to 58.1123, while the inverse distance weighted showed a value range of 2.26745–380.991. The spatial data modelling analysis demonstrated that the distribution of slum areas was widely spread along the Musi River, with an accuracy value of 96.8%, which falls within the range of >0.9-1.

CXCL14 is one of the most evolutionarily conserved members of the chemokine family and is constitutionally expressed in multiple organs, suggesting that it is involved in the homeostasis maintenance of the system. CXCL14 is highly expressed in colon epithelial cells and shows obvious gene silencing in clinical colon cancer samples, suggesting that its silencing is related to the immune escape of cancer cells. In this paper, we analyzed the expression profiles of multiple human clinical colon cancer datasets and mouse colon cancer models to reveal the variation trend of CXCL14 expression during colitis, colon polyps, primary colon cancer, and liver metastases. The relationship between CXCL14 gene silencing and promoter hypermethylation was revealed through the colorectal carcinoma methylation database. The results suggest that CXCL14 is a tumor suppressor gene in colorectal carcinoma, which is activated first and then silenced during the process of tumor occurrence and deterioration. Promoter hypermethylation is the main cause of CXCL14 silencing. The methylation level of CXCL14 is correlated with the anatomic site of tumor occurrence and positively correlated with patient age, and associated with prognosis. Reversing the hypermethylation of CXCL14 may be an epigenetic therapy for colon cancer.

Snow parameters have traditionally been retrieved using discontinuous, multi-band sensors; however, continuous hyperspectral sensor are now being developed as an alternative. In this paper we investigate the performance of various sensor configurations using machine learning neural networks trained on a simulated dataset. Our results show improvements in accuracy of retrievals of snow grain size and impurity concentration for continuous hyperspectral channel configurations. Retrieval accuracy of snow albedo was found to be similar for all channel configurations.

Background: Waste management is one of the challenges facing cities around the world. In Africa, where the increase in the urban population and the growing demand for consumer goods are driving up the rate of waste production, waste collection and disposal are posing serious problems, not only for municipal and central government officials, but also and above all for the local population. In Togo, and more specifically in the city of Lomé and the surrounding area (Greater Lomé), as in other African cities, the average annual production is estimated at 305340 tonnes, of which 89428 tonnes are collected and buried, giving a collection rate of 29.29%. A tiny proportion of the waste collected (9,000 tonnes, or 2.95%) is recycled as compost by associations and/or NGOs. The three key players who share this task are the local authority, the formal sector and the informal sector. Objective: The aim of this study is to assess the current state of waste management in Greater Lomé, which poses a major threat to public health, socio-economic development and the environment. Material and methods: To this end, documentary research and surveys carried out on two types of waste management stakeholder, namely formal and informal, in the five districts of Greater Lomé enabled us to make a general diagnosis. Results: However, despite the efforts made by the stakeholders involved in waste management, it appears that the transformation of solid household waste into compost remains the most suitable endogenous method for recovering fermentable waste and returning it to the soil, in order to improve the organization of waste management in the city of Lomé, reduce the quantity of waste to be landfilled and clean up the city. KEYWORDS: Urban waste, management, composting, collection, treatment, autonomous district of Greater Lomé.

Today electricity is distributed to the individual users via physical Copper connections. From the power stations, the energy is transported through transmission lines where the electricity, sinusoidally modulated at a fixed frequency of about 50 Hz, is raised up to a voltage in a range approximately variating between 30, and 110 kV. When electrons, aligned at this voltage, pass through the transmission lines, they cause coherent vibrations, sometimes even audible in the acoustic frequencies. In the spectrum of movements to which electric cables are subjected, there are also unexpected and sporadic movements caused by winds and rain. The problem of carrying out persistent, precise and spatially distributed monitoring of transmission line health is to use a large number of sensors physically distributed everywhere and somehow transmit the results to a control station. The use of synthetic aperture radar (SAR) data could be a viable solution of persistent and wide-area high-voltage vibration monitoring. In this paper we produce a comprehensive survey on how to monitor both movements in terms of vibrational displacement, due to weathering, and those due to electricity transmission, normally fixed at about 50 Hz. The results demonstrate the technical feasibility of an operational use of SAR for these purposes in the very short term. This would allow the possibility of monitoring malfunctions such as black-outs or other frequency anomalies.

Integrating voice assistant technology can potentially enhance accessibility and user interaction in web-based platforms for geospatial data visualisation and processing. This paper presents an open-source development incorporating a voice virtual assistant into the BStreams web application platform, designed specifically for visualising geospatial data. The study aimed to mitigate the observed limitations of virtual assistants in understanding the semantics and context of user commands in the geospatial domain. A discourse framework specialised for geospatial data was developed using a structured prototype methodology. In addition, a survey assisted in identifying commonly used English terminologies for geospatial data interaction. The questionnaire results were subsequently assessed using the ChatGPT natural language processing model. The application used open-source frameworks, including Web Speech API, Leaflet, Mapbox geocoding, and JavaScript. This investigation indicates that voice virtual assistants can potentially enhance human-computer interaction for geospatial data visualisation and processing. However, challenges related to natural language understanding, accents, and domain knowledge were raised. The paper advocates for further research to refine the integration of voice technology in this domain.

This research is a preliminary phase of a general effort to develop a generic-data transferring capability via human haptic thermal sensation (generic-data refers to a coded language like Morse or Braille). For the capability to be effective, it must include a large variety of short recognizable cues. Hence, we propose the concept of cues based on sequences of thermal pulses, i.e., combinations of warm and cool pulses with several levels of intensity. The objective of this study was to determine the feasibility of basing a generic-data-transfer capability on thermal cues composed of sequences of short pulses. The research included defining the basic characteristics of the stimuli parameters and developing practical methods for generating and measuring them. Several sequences were designed in light of the relevant data known to date, and tests were conducted. The thermal cues presented to the participants were sensed and recognized by touch. The results indicate high feasibility for a capability that is applicable in various scenarios. In addition, the low impact on human skin temperature due to short stimuli duration represents an inherent advantage for later implementation. This report presents promising findings and offers insights for further investigation.

Fish tissue samples from 203 adult individuals were collected in the main ports and markets of the Pacific coast of Panama. Molecular identification based on cytochrome oxidase I gene segment of all species was verified GENBANK reference sequences. 34 species from 14 families (Ariidae, Lutjanidae, Caranjidae, Scianidae, Centropomidae, Serranidae, Scombridae, Sphyraenidae, Haemulidae, Gerreidae, Stromotidae, Lobotidae, Malacanthidae, Mugilidae) were identified at species molecular level from 164 sequences. Also, three Caribbean species were molecularly identified among the analyzed samples (Mycteroperca xenarcha, Paralonchurus brasilensis and Lobotes surinamensis). Species diversity was slightly higher in the Gulf of Panama than in the Gulf of Chiriquí. For species with 5 or more individual sequences, genetic diversity and genetic connectivity parameters such as: total number of haplotypes (H), haplotype diversity (Hd), and nucleotide diversity (π) were calculated. Overall, pelagic-migratory species showed higher values of genetic diversity than coastal and estuarine species with some exceptions. Connectivity between Gulf areas was compared using values of genetic distances and genetic differentiation (Fst). High level of connectivity observed between Gulf of Chiriqui and Gulf of Montijo indicates the existence of a single stock in that area for the following species: Scomberomorus sierra, Caranx caninus and Lutjanus guttatus. Demographic history of the most common species was examined using Tajima’s D values suggesting population expansion for two snapper species, L. peru and L. argentiventris, having significant and higher values. Another important contribution from this research was the production of primers and dual labeled probes for environmental DNA detection using qPCR for the five most abundant species (spotted rose snapper, yellow snapper, green jack, Pacific crevalle jack and the Pacific sierra fish). These markers represent a new set of tools for environmental DNA (eDNA) detection and molecular traceability of three commercially important fish species along the supply chain including landing sites and markets of the main fishery areas.

This study addresses the limited coverage of regulatory monitoring for particulate matter 2.5 microns or less in diameter (PM2.5) in Thailand due to the lack of ground station data by developing a model to estimate daily PM2.5 concentrations in small regions of Thailand using satellite data at a 1-kilometer resolution. The study employs multiple linear regression and three machine learning models and finds that the random forest model performs the best for PM2.5 estimation over the period of 2011-2020. The model incorporates several factors such as Aerosol Optical Depth (AOD), Land Surface Temperature (LST), Normalized Difference Vegetation Index (NDVI), Elevation (EV), Week of the year (WOY), and year and applies them to the entire region of Thailand without relying on monitoring station data. Model performance is evaluated using the coefficient of determination (R2) and root mean square error (RMSE), and the results indicate high accuracy for training (R2: 0.95, RMSE: 5.58 μg/m3), validation (R2: 0.78, RMSE: 11.18 μg/m3), and testing (R2: 0.71, RMSE: 8.79 μg/m3) data. These PM2.5 data can be used to analyze the short- and long-term effects of PM2.5 on population health and inform government policy decisions and effective mitigation strategies.

This study evaluated the effectiveness of an electronic system for managing drug-sensitive pulmonary tuberculosis patients in the Kyrgyz Republic. This was a cohort study using programmatic data. The study included patients registered on the paper-based system in 2019 and the electronic system between June 2021 and May 2022. Data was taken from 302 individuals from the electronic system for completeness and concordance in comparison with the paper-based system. The study showed that for most variables the completeness and concordance was 85.3%-93.0% and was lowest for non-mandatory fields such as medication side effects (26.8% vs 13.6%). No significant difference was observed in time taken from symptom onset to diagnosis and treatment initiation between the two systems. However, the electronic system had a significantly higher percentage of patients who initiated treatment on the same day of diagnosis (80.3% vs. 57.1%). The proportion with successful outcomes was similar in both groups, but the electronic system had a significantly lower proportion of patients with outcomes that were not evaluated or recorded (4.8% vs. 14.3%, p &lt; 0.001). The study highlights the potential advantages of implementing an electronic TB register system for improving records. We advocate for similar studies in other regions in Kyrgyz Republic.

Endometriosis is a complex chronic condition characteristic of chronic pelvic pain, dysmenorrhea, anxiety and fatigue. This can often lead to multimorbidity which is defined by the presence of two or more long term conditions. Delayed diagnosis of endometriosis is a crucial issue that leads to poor quality of life and clinical management. There are a variety of limitations linked to conducting endometriosis research including lack of dedicated funding. Additionally, accessing existing electronic healthcare records can be challenging due to governance and regulatory restrictions. Missing data issues are another concern that has been commonly identified among real-world studies. Considering these challenges, data science technique could provide a solution by way of using synthetic datasets that could be generated using known characteristics of endometriosis to explore the possibility of predicting multimorbidity. This study aimed to develop an exploratory machine learning model that can predict multimorbidity among women with endometriosis using real-world and synthetic data. A sample size of 1012 was used from two endometriosis specialized centres in the UK. In addition, 1000 synthetic data records per centre were generated using the widely used Synthetic Data Vault’s Gaussian Copula model based on patients’ records’ characteristics. Three standard classification models, Logistic Regression (LR), Support Vector Machine (SVM), and Random Forest (RF), were used for classification. The average accuracies for all three models (LR, SVM and RF), given as “model accuracy-centre1: accuracy-centre2” were found to be: LR 64.26%:69.04%, SVM 67.35%:68.61%, and RF 58.67%:73.76% on real-world data, and LR 69.9%:72.29%, SVM 69.39%:70.13, and RF 68.88%:74.62 on synthetic data, respectively. The findings of this report show machine learning models trained on synthetic data performed better than models trained on real-world data. Our findings suggest synthetic data holds great promise for shows value to conduct clinical epidemiology and clinical trials that could devise better precision treatments and possibly reduce the burden of multimorbidity.

Abstract: Our research analyzed the characteristics of phase IV clinical trials in oncology using data from the ClinicalTrials.gov registry. The included trials were conducted between January 2013 and December 2022 and were examined for key characteristics, including outcome measures, interventions, sample sizes, and study design, different cancer types, and geographic regions. Our analysis included 368 phase IV oncology studies. We found that 50% of these studies aimed to examine both safety and efficacy, while 43.5% only reported efficacy outcome measures, and 6.5% only described safety outcome measures. Only 16.9% of studies were powered to detect adverse events with a frequency of 1 in 100. Targeted therapies accounted for the majority of included studies (53.5%), with breast (32.91%) and hematological cancers (25.82%) being the most frequently investigated malignancies. Most phase IV oncology studies lacked sufficient power to detect rare adverse events due to their small sample sizes and instead focused on effectiveness. To ensure that there is no gap in drug safety data collection and detection of rare adverse events due to limited phase IV clinical trials, there is a significant need for additional education and participations by both health care providers and patients in spontaneous reporting processes.

Understanding epigenome paths through which smoking contributes to cardiometabolic traits is important for downstream applications. In this study, I used a SNP-based analytical pipeline to integrate several publicly available datasets and identify CpG sites that mediate the impact of smoking on cardiometabolic traits. After applying stringent statistical criteria, 11 CpG sites were detected that showed significant association (P<5e-8) with cardiometabolic traits at both discovery and replication stage. By integrating eQTL data, I identified genes behind a number of these associations. cg05228408 was hypomethylated in smokers and contributed to higher blood pressure by lowering the expression of CLCN6 gene. cg08639339 was hypermethylated in smokers and lowered metabolic rate by increasing the expression of RAB29; furthermore, I noted TMEM120A mediated the impact of smoking-cg17325771 on LDL, and LTBP3 mediated the smoking-cg07029024 effect on heart rate. This study provides a list of CpG sites that mediates the impact of smoking on cardiometabolic traits and a framework to investigate epigenome path through which a lifestyle habit modifies disease risks.

Background: The prevalence of physical inactivity has been rising in many countries in recent years, adding to the burden of non-communicable diseases and affecting overall health worldwide. The aim of this study is to determine the impact of physical activity on mortality from ischemic heart disease (IHD) separately for those respondents who were diagnosed with IHD and for those who were not diagnosed with IHD in their baseline health survey. Methods: In the baseline survey (2006–2008), 7100 men and women ages 45–72 were examined within the framework of the international study Health, Alcohol, and Psychosocial Factors in Eastern Europe (HAPIEE). 6770 participants were available for statistical analysis (after excluding 330 respondents due to missing information on study variables). Physical activity was determined by leisure-time physical activities (hours/week). All participants in the baseline survey were followed up for IHD mortality events until December 31, 2018. Results: Using multivariate Cox regression analysis, it was found that moderate and higher levels of physical activity significantly reduced the risk of IHD mortality (HR=0.54 and HR=0.60 respectively) in men who were not diagnosed with IHD at baseline compared with physically inactive subjects. It was found that among men and women who were diagnosed with IHD at baseline, physical activity reduced the risk of mortality from IHD compared with those who were physically inactive (HR=0.54 and HR=0.41 respectively). Using mediation analysis, was found that physical activity directly predicted statistically lower IHD mortality (P&lt;0.05) in men and women. Conclusion: Physical activity was a significant factor that directly predicted statistically lower IHD mortality, regardless of whether subjects had IHD at baseline or not.

This article presents a review of the distribution system state estimation (DSSE) algorithms from the model-based approach to the recent data-driven methodologies. The insufficient measurements which result in low observability have motivated the need to shift from the conventional algorithm to data-driven approaches that can successfully estimate states despite the DSSE challenges. This article discusses the nonlinearity in the DSSE problem formulation and how different model-based methods have been proposed to mitigate the problems of robustness, ill-conditioning, and complexity. Moreover, approximate DSSE to obviate nonlinearity were discussed: complex linearization, small angle approximation, convexification and compressed sensing. Furthermore, probabilistic DSSE methods were also discussed in the need to quantify the uncertainty associated with the state estimation results. Also, data-driven methods applicable to DSSE, pseudo measurement generations, and topology identification were also discussed using machine and deep learning methods. Lastly, a recent approach that employs a hybrid of model-based and data-driven methods using matrix and tensor completion is surfacing because they work in a low observable condition of the network and can estimate the states satisfactorily. With this review, researchers can look further into developing and improving on the model-based data-driven methods less susceptible to the barriers in conventional DSSE algorithms.

The study is based on the notion that big data predictive analytics is important for developing strategic alliances performance of companies. this study investigates the relationship between big data predictive analytics, big data culture, and competitive strategies 'techniques were adopted, such as descriptive statistics, correlation,regression, etc. using SPSS and SmartPLS statistical software. Hypotheses were tested with bootstrapped analysis using SEM (through SmartPLS). The study developed a structural equation model by using the SEM analysis. The results of the SEM analysis suggested the hypothesized model of the study was valid. The results supported all the hypotheses of the study.Through empirical analysis, demonstrated the conclusion is that the big data predictive analytics has a positive and significant relationship with strategic alliance performance

MSMEs play an important role in the global economy, employing nearly 90% of the workforce and contributing nearly 50% of the world's gross domestic product. However, many MSMEs have difficulty finding and retaining repeat customers, which is one of the main challenges for small businesses. This study aims to find out how customer data can be used to improve marketing strategies and meet customer needs and preferences more effectively. This research also aims to provide solutions and recommendations for MSMEs to improve their marketing through personalizing the experience for their customers. This study uses the SEM-PLS method with a quantitative approach. The population is taken from SMEs operating in the city of Semarang. 100 Samples are determined through Quota Sampling. Personalized marketing involves using customer data to customize the customer experience, which can create a closer relationship between customers and MSMEs. This research is still limited to the effectiveness of Personalized Marketing on customer loyalty in MSMEs. There have been many studies that discuss MSME customer loyalty with the marketing communication method. However, there are not many studies that specifically discuss personalized marketing for MSMEs.

The information data accuracy affects the working reliability of production management system directly. Mobile equipment is an important part of integrated manufacturing system, in the course of its works, due to the complex working environment and the dynamic change of its position, it lead to the important problem of information detection distortion. Because the application of fractional differential operator has the dual functions of enhancing signal strength and reducing data error, we puts forward a data processing method of obtaining production information data of various accuracy by changing the parameters of fractional differential operator. Establish a mobile equipment detection data fusion processing model based on fractional order partial differential equations and apply it in the processing experiment of mobile equipment testing information detection data in an integrated manufacturing system, the feasibility and effectiveness of the method are verified. We conclude that the fractional order partial differential equations used in the processing of mobile equipment monitoring information data of an integrated manufacturing system has the function of obtaining production information data of various accuracy, which are of great significance to improve the working reliability in integrated manufacturing system. which is of great significance to improve the working reliability and scientific decision of integrated manufacturing system.

Bayesian Maximum Entropy (BME) is increasingly used in predicting and mapping spatio-temporal data. However, studies that have fully evaluated its robustness empirically are rare. Therefore, this research examined empirically the effect of skewness, sample size and spatial dependency level using simulated data. We considered symmetric data, data positively skewed by 1, 3, 6 and 9, data with weak, moderate, and strong spatial dependency levels, and sample sizes from 100 to 500 at the interval length of 50. The results showed that the variation of sample sizes and spatial dependency levels do not affect the Mean Square Error (MSE) and bias of BME prediction. However, skewness affects the MSE of prediction but does not affect the bias. This result indicates that BME is robust to sample size and is unbiased. Despite the significant difference due to skewness, a graphical plot showed values of MSE close to zero, suggesting that BME can be considered robust to skewness.

Raman Spectroscopy has long been anticipated to augment clinical decision making, such as classifying oncological samples. Unfortunately, the complexity of Raman data has thus far inhibited its routine use in clinical settings. Traditional machine learning models have been used to help exploit this information, but recent advances in deep learning have the potential to improve the field. However, there are a number of potential pitfalls with both traditional and deep learning models. We conduct a literature review to ascertain the recent machine learning methods used to classify cancers using Raman spectral data. We find that while deep learning models are popular, and ostensibly outperform traditional learning models, there are many methodological considerations which may be leading to an over-estimation of performance: primarily, small sample sizes which compound upon sub-optimal choices regarding sampling and validation strategies. Amongst several recommendations is a call to collate large benchmark Raman datasets, similar to those that have helped transform digital pathology, which researchers can use to develop and refine deep learning models.

Additive manufacturing (AM) are used in several industries such as automotive, aerospace, and medical sciences. One of the most common devices used in additive manufacturing is fused deposition modeling (FDM) 3D printers. This fabrication method has different inputs that affect the quality of the parts. In this research, the bending fatigue properties of polylactic acid (PLA) biomaterial made with a 3D printer are investigated. To demonstrate the influence of printing parameters on fatigue lifetime, standard specimens with nozzle diameters of 0.2-0.6 mm, extruder temperature of 180-240°C, and print speed of 5-15 mm/s were printed. After performing fully-reversed bending fatigue tests, it was found that printed specimens at 180°C have the best fatigue lifetime in most cases. Accordingly, fatigue behavior improved by reducing the nozzle diameter. Printing at lower temperatures also improved fatigue lifetime. The printing speed affected the slope of the S-N diagram, known as the fatigue strength exponent.

Room temperature superconductivity has recently been reported for a carbonaceous sulfur hydride (CSH) under high pressure by Snider et al [1]. The paper reports sharp drops in magnetic susceptibility as a function of temperature for five different pressures, that are interpreted as signaling a superconducting transition. Here I question the validity and faithfulness of the magnetic susceptibility data presented in the paper by comparison with the measured raw data reported by two of the authors of ref. [2]. This invalidates the assertion of the paper [1] that the susceptibility measurements support the case for superconductivity in this compound.

Private vehicle travel is the most basic mode of transportation, and the effective control of the real-world fuel consumption rate of light-duty vehicles plays a vital role in promoting sustainable economic development as well as achieving a green low-carbon society. Therefore, the impact factors of individual carbon emission must be elucidated. This study builds five different models to estimate real-world fuel consumption rate of light-duty vehicles in China. The results reveal that the Light Gradient Boosting Machine (LightGBM) model performs better than the linear regression, Naïve Bayes regression, Neural Network regression, and Decision Tree regression models, with mean absolute error of 0.911 L/100 km, mean absolute percentage error of 10.4%, mean square error of 1.536, and R squared (R2) of 0.642. This study also assesses a large number of factors, from which three most important factors are extracted, namely, reference fuel consumption rate value, engine power and light-duty vehicle brand. Furthermore, a comparative analysis reveals that the vehicle factors with greater impact on real-world fuel consumption rate are vehicle brand, engine power, and engine displacement. Average air pressure, average temperature, and sunshine time are the three most important climate factors.

Pulsed thermography is a commonly used non-destructive testing method, and is increasingly studied for advanced materials such as carbon fiber-reinforced polymer (CFRP) evaluation. Different processing approaches are proposed to detect and characterize anomalies that may be generated in structures during the manufacturing cycle or service period. In this study, we used a type of matrix decomposition using Robust-PCA via Inexact-ALM in our experiment. We investigate this method as a pre-and post-processing method on thermal data acquired by pulsed thermography. We employed state-of-the-art methods, i.e., PCT, PPT, and PLST, as the main process. The results indicate that pre-processing on thermal data can elevate the defect detectability while post-processing, in some cases, can deteriorate the results.

This paper proposes a forecast-centric adaptive learning model that engages with the past studies on the order book and high-frequency data, with applications to hypothesis testing. In line with the past literature, we produce brackets of summaries of statistics from the high-frequency bid and ask data in the CSI 300 Index Futures market and aim to forecast the one-step-ahead prices. Traditional time series issues, e.g. ARIMA order selection, stationarity, together with potential financial applications are covered in the exploratory data analysis, which pave paths to the adaptive learning model. By designing and running the learning model, we found it to perform well compared to the top fixed models, and some could improve the forecasting accuracy by being more stable and resilient to non-stationarity. Applications to hypothesis testing are shown with a rolling window, and further potential applications to finance and statistics are outlined.

Abstract. The purpose of this review is to investigate the nature of privacy concerns in the context of Smart Local Energy Systems (SLES) to understand how SLES providers can minimize both users’ concern, and cause for concern, around privacy. We conducted a rapid realist review and thematic framework analysis against Bronfrenbrenner’s socio-ecological model to understand privacy concerns in different contexts. A common privacy concern was that sharing detailed energy use data had the potential to reveal information about home life, and to intrude upon people’s sense of autonomy, choice and control. Evidence suggests that people are willing to accept newdata sharing technologies if the benefits of doing so are clear, anticipated, and mutually beneficial. Building trust, through increasing knowledge and understanding was a mechanism for overcoming privacy concerns, but this was mediated by the organization providing the information. Non-profit organizations were more trusted to ensure appropriate safeguards to privacy were in place. One key barrier to participation with good supporting evidence was that people can resist perceived intrusions on their privacy. This could be actively resisted by refusing to install data collection technologies or passively by non-participation in adapting energy use behaviors: both of which are necessary for SLES to achieve their goals of managing energy demand and building resilience in smart grids.

As a result of the influence of geographical environment and historical heritage, food preference has significant regional differentiation characteristics. However, the spatial structure of food culture represented by the cuisine culture at the regional level has not yet been explored from the perspective of geography. This study aims to explore such patterns by focusing on the restaurants of the eight most famous cuisines in Mainland China. Initially, the density based geospatial hotspot detector method is proposed to analyze and mapping the spatial quantitative characteristics of the eight major cuisines. A heuristic method for geographical regionalization based on machine learning was used to analyze spatial distribution patterns in accordance with the proportion of these cuisines in each prefecture-level city. Results show that some types of single-category cuisines have a stronger spatial concentration effect in the present, whereas others have a strong diffusion trend. In the comprehensive analysis of multicategory cuisines, the eight major cuisines formed a new structure of geographical regionalization of Chinese cuisine culture. This study is helpful to understand regional structure characteristics of food preference, and the density based hotspot detector proposed in this paper can also be used in the analysis of other type of POI data.

In this work, we treat a prediction problem via the conditional hazard function of a scalar response variable Y given a functional random variable X by using the local linear technique. The main purpose of this paper is to investigate the asymptotic normality of the nonparametric estimator of the conditional hazard function, under some general conditions. A simulation study, conducted to assess finite sample behavior, demonstrates the superiority of our method than the standard kernel method

Seismic imaging is the main technology used for subsurface hydrocarbon prospection. It provides an image of the subsurface using the same principles as ultrasound medical imaging. It is based on emitting a sound (pressure) wave through the subsurface and recording the reflected echoes using hydrophones (pressure sensors) and/or geophones (velocity/acceleration sensors). Contrary to medical imaging, which is done in real time, subsurface seismic imaging is an offline process that involves a huge volume of data and needs considerable computing power. The raw seismic data are heavily contaminated with noise and unwanted reflections that need to be removed before further processing. Therefore, the noise attenuation is done at an early stage and often while acquiring the data. Quality control (QC) is mandatory to give confidence in the denoising process and to ensure that a costly data re-acquisition is not needed. QC is done manually by humans and comprises a major portion of the cost of a typical seismic processing project. It is therefore advantageous to automate this process to improve cost and efficiency. Here, we propose a supervised learning approach to build an automatic QC system. The QC system is an attribute-based classifier that is trained to classify three types of filtering (mild = underfiltering, noise remaining in the data; optimal = good filtering; harsh = overfiltering, the signal is distorted). The attributes are computed from the data and represent geophysical and statistical measures of the quality of the filtering. The system is tested on a full-scale survey (9000 km2) to QC the results of the swell noise attenuation process in marine seismic data. The results are encouraging and helped identify localized issues that were difficult for a human to spot.

The main goal of our work is the revealing of problematic issues related to estimates of the absorption coefficient of colored organic matter in the northern seas from data of the Ocean and Land Color Instrument (OLCI) on the Sentinel-3 satellites. In particular, a comparison of the OLCI standard error estimates ADG443_NN_err., relating to the measurement and retrieval of the geophysical products, with the uncertainties in the real situation of the northern seas, where the natural conditions are extremely unfavorable (first of all, frequent cloudiness, low Sun heights). We conducted a comprehensive multi-sensor study of the uncertainties using various approaches, first at all, directly comparing the data from satellite (OLCI Sentinel-3 and four other ocean color sensors) and field measurements in five sea expeditions 2016-2019, by using the different processing algorithms. Our analysis has shown that the real uncertainties of the final product are significantly higher than the calculated errors of the ADG443_NN_err., which is 100% and ~10%. The main reason for that is the unsatisfactory atmospheric correction. We present the results of the analysis of the different effecting factors (satellite sensors, processing algorithms, use of the other parameters), and formulate the tasks of future work.

Research on Traffic Light Recognition (TLR) has grown in recent years, primarily driven by the growing interest in autonomous vehicles development. Machine Learning algorithms have been widely used to that purpose. Mainstream approaches, however, require large amount of data to properly work, and as a consequence, a lot of computational resources. In this paper we propose the use of Expert Instruction (IE) as a mechanism to reduce the amount of data required to provide accurate ML models for TLR. Given an image of the exterior scene taken from the inside of the vehicle, we stand the hypothesis that the picture of a traffic light is more likely to appear in the central and upper regions of the image. Frequency Maps of traffic light location were thus constructed to confirm this hypothesis. The frequency maps are the result of a manual effort of human experts in annotating each image with the coordinates of the region where the traffic light appears. Results show that EI increased the accuracy obtained by the classification algorithm in two different image datasets by at least 15%. Evaluation rates achieved by the inclusion of EI were also higher in further experiments, including traffic light detection followed by classification by the trained algorithm. The inclusion of EI in the PCANet achieved a precision of 83% and recall of 73% against 75.3% and 51.1%, respectively, of its counterpart. We finally presents a prototype of a TLR Device with that expert model embedded to assist drivers. The TLR uses a smartphone as a camera and processing unit. To show the feasibility of the apparatus, a dataset was obtained in real time usage and tested in an Adaptive Background Suppression Filter (AdaBSF) and Support Vector Machines (SVMs) algorithm to detect and recognize traffic lights. Results show precision of 100% and recall of 65%.

Sentinel-1 satellite system continuously observes European countries in a relatively high revisit frequency of 6 days per orbital track. Given the Sentinel-1 configuration, most areas in Czechia are observed every 1–2 days by different tracks in a moderate resolution. This is attractive for various types of analyses by various research groups. The starting point for processing is an original data provided by ESA, for interferometry (InSAR) this level is a Single Look Complex (SLC) data. This work represents advantages of storing data augmented to a specifically corrected level of data, SLC-C. The presented database contains Czech nation-wide Sentinel-1 data stored in burst units that have been preprocessed to the state of a consistent well-coregistered dataset of SLC-C. These are resampled SLC data with their phase values reduced by a topographic phase signature, ready for fast interferometric analyses (an interferogram is generated by a complex conjugate between two stored SLC-C files). The data can be used directly into multitemporal interferometry techniques, e.g. Persistent Scatterers (PS) or Small Baseline (SB) techniques applied here. A further development of the nation-wide system utilising SLC-C data would lead into a dynamic state where every new pre-processed burst triggers a processing update to detect unexpected changes from InSAR time series and therefore provide a signal for early warning against a potential dangerous displacement, e.g. a landslide, instability of an engineering structure or a formation of a sinkhole. An update of the processing chain would also allow use of cross-polarised Sentinel-1 data, needed for polarimetric analyses. The current system is running at a national supercomputing centre IT4Innovations in interconnection to the Czech Copernicus Collaborative Ground Segment (CESNET), providing fast on-demand InSAR results over Czech territories. A full nation-wide PS processing using data over Czechia has been performed in 2017, discovering several areas of land deformation. Its downsampled version and basic findings are demonstrated within the article.

Olympic Games have a huge impact on the cities where they are held, both during the actual celebration of the event and before and after it. This study presents a new approach based on spatial analysis, GIS, and data coming from Location Based Social Networks to model the spatiotemporal dimension of impacts associated with the Rio 2016 Olympic Games. Geolocalized data from Twitter are used to analyze the activity pattern of users from two different viewpoints. The first monitors the activity of Twitter users during the event -the arrival of visitors, where they came from, and the use resident and tourist made of different areas of the city. The second assesses the spatiotemporal use of the city by Twitter users before the event, compared to the use during and after the event. The results not only reveal which spaces were the most used while the Games were being held but also changes in the urban dynamics after the Games. Both approaches can be used to assess the impacts of mega-events and to improve the management and allocation of urban resources such as transport and public services infrastructure.

Corynebacterium pseudotuberculosis is a Gram-positive bacterium that causes caseous lymphadenitis, a disease that predominantly affects sheep, goat, cattle, buffalo, and horses, but has also been recognized in other animals. This bacterium generates a severe economic impact on countries producing meat. Gene expression studies using RNA-seq is one of the most commonly used techniques to perform transcriptional experiments. Computational analysis on such data through reverse-engineering algorithms leads to a better understanding of the genome-wide complexity of gene interactomes, enabling the identification of genes having the most significant functions inferred by the activated stress response pathways. In this study, we identified the influential or causal genes from four RNA-seq data-sets from different stress conditions (high iron, low iron, acid, osmosis, and PH) in C. pseudotuberculosis, using a consensus-based network inference algorithm called miRsig and identified the causal genes in the network using the miRinfluence tool, which is based on the influence diffusion model. We found that over 50\% of the genes identified as influential have some essential cellular functions in the genomes. In the strains analyzed, most of the causal genes have crucial roles or participate in processes associated with response to extracellular stresses, pathogenicity, membrane components, and essential genes. This research brings new insight into the understanding of virulence and infection by C. pseudotuberculosis.

The world is facing new challenges every day; however, with the spread of the pandemic around the world, this new challenge is different. The pandemic is increasing and concentrating various challenges simultaneously. Although different sectors are facing consequences, the most important sectors, that is, health and economy are the most affected. When the pandemic began, it was not known how long it would last, which complicated health and economic planning. Therefore, it is important for decision makers and the public to know the predictions and expectations of the future of these challenges. In this work, the current situation is analyzed. Then, an expectation model is developed based on the statistics of the pandemic using a growth rate model based on an exponential and logarithmic rate of increase. Based on the available open data about the pandemic spread, the model can successfully predict future expectations, including the duration and maximum number of cases of the pandemic. The model uses the equilibrium point as the day the cases decrease. The model can be used for planning and the development of strategies to overcome these challenges.

Nutrient estimation in forest ecosystems through satellite images allows us to obtain accurate data, starting with data transformation from forest stands and the existing relationship with the spectral information of the image through modeling. The objective of the study was to quantify and validate the content of C, N, H in aboveground tree biomass in managed stands using spatial modeling and satellite images. This study was conducted during 2017-2018 in managed forest stands in San Juan Lachao, Oaxaca, Mexico. Fifteen 400 m2 experimental sites were selectively established, using a completely randomized experimental design of five silvicultural treatments with three replications. As part of data preprocessing, normality and homogeneity of variances assumptions were checked using the Shapiro-Wilk and Bartlett tests, respectively. From the pixels, data of the average of Normalized Difference Vegetation Index (NDVI) that surrounded the sampling sites were contrasted against the data obtained from forest inventory and the regression models to estimate C, N, H and biomass were generated. Models were validated by NDVI. With the models we estimated 0.95 t ha-1 biomass, which contains between 0.61 and 0.63 of C, 0.44-0.46 of N and 0.24 of H. The models generated had coefficients of determination (R2) of 0.85 to 0.87, which are significant parameters (p ≤ 0.0001). These results confirm that the use of Sentinel satellite images in the estimation of these elements in forest ecosystems based on the relationship between data inventory and the NDVI is highly reliable.

Gas Path Analysis and matching turbine engine models to experimental data are inverse problems of mathematical modelling which are characterized by parametric uncertainty. This results from the fact that the number of measured parameters is significantly lower than the number of components’ performance parameters needed to describe the real engine. In these conditions, even small measurement errors can result in a high variation of results, and obtained efficiency, loss factors etc. can appear out of the physical range. The current methods of engine model identification have developed considerably to provide stable, precise and physically adequate solutions. Presented in this work is an estimation method of engine components’ parameters based on multi-criteria identification which provides stable estimations of parameters and their confidence intervals with the known measurement errors. A priori information about the engine, its parameters and performance is used directly in the regularised identification procedure. The mathematical basis for this approach is the fuzzy sets theory. Forming objective functions and scalar convolutions synthesis of these functions is used to estimate gas-path components’ parameters. A comparison of the proposed approach with traditional methods showed that its main advantage is high stability of estimation in the parametric uncertainty conditions. Regularization reduces scattering, excludes incorrect solutions which do not correspond to a priori assumptions, and also helps to implement the Gas Path Analysis at the limited number of measured parameters. The method can be used for matching thermodynamic models to experimental data, Gas Path Analysis and also adapting dynamic models for the needs of the engine control system.

The parameters of logistic regression models are usually obtained by the method of maximum likelihood (ML). However, in analyses of small data sets or data sets with unbalanced outcomes or exposures, ML parameter estimates may not exist. This situation has been termed “separation” as the two outcome groups are separated by the values of a covariate or a linear combination of covariates. To overcome the problem of non-existing ML parameter estimates, applying Firth’s correction (FC) was proposed. In practice, however, a principal investigator might be advised to “bring more data” in order to solve a separation issue. We illustrate the problem by means of an examples from colorectal cancer screening and ornithology. It is unclear if such an increasing sample size (ISS) strategy that keeps sampling new observations until separation is removed improves estimation compared to applying FC to the original data set. We performed an extensive simulation study where the main focus was to estimate the cost-adjusted relative efficiency of ML combined with ISS compared to FC. FC yielded reasonably small root mean squared errors and proved to be the more efficient estimator. Given our findings, we propose not to adapt the sample size when separation is encountered but to use FC as the default method of analysis whenever the number of observations or outcome events is critically low.

Polychlorinated dibenzo-p-dioxins and polychlorinated dibenzo-p-furans (PCDD/Fs) are environmental pollutants with a great persistence, capacity of bioaccumulation, and well known important toxic effects in humans and animals. Incinerators of hazardous, municipal and medical waste, chlorine bleaching of paper pulp, cement plants, and the traffic of motor vehicles are the most frequent emission sources of these compounds. The diet, followed at a great distance by inhalation, is generally the main way of human exposure to PCDD/Fs. Human biomonitoring is of a great importance to prevent potential adverse effects derived from exposure to chemicals such as PCDD/Fs. In relation to this, blood is among the most used biological monitors. In the current review, we have summarized the recent information (2000-2009) published in the scientific literature (databases: Scopus and PubMed) on the concentrations of PCDD/Fs in blood samples of non-occupationally exposed populations, as well as in some groups of occupationally exposed individuals. We have revised a number of studies conducted in various African American, Asian and European countries, and Australia. Unfortunately, the information is quite limited. No data are available for most countries over the world. Based on the results here reviewed –where available- the current health risks for the general populations do not seem to be of concern. Moreover, taking into account the important reductions observed in the levels of PCDD/Fs in foodstuffs, new decreases in the concentrations of PCDD/Fs in blood -and other biological tissues- are very probable in the immediate years.