The prototype misfit layer compound (SnS)1.17NbS2 consists of alternatively a metallic triatomic NbS2 layer in which Nb atoms are sandwiched by S atoms and an insulating SnS double-layer of NaCl-type structure. Here we investigate the effect of lattice misfit on the stability and chemical bonding in the misfit layer compound using a first-principles density-functional theory approach. The calculations show that for the (SnS)1+xNbS2 approximants, the most stable one has x = 0.167, close to the experimental observations. Charge analysis finds a moderate charge transfer from the SnS to NbS2. Sn or S vacancies in the SnS part affect the electronic properties and interlayer interactions. The obtained information here helps understand the mechanism of formation and stability of the misfit layer compounds and ferecrystals, and further to design of novel multilayer compounds and emerging van der Waals heterostructures.

Carbon capture, utilization, and storage (CCUS) considered a the key strategy for reducing the emissions of anthropogenic carbon dioxide from power generation plants, can be achieved by three main technologies: oxy-fuel combustion, pre-combustion, and post-combustion capture. Post-combustion carbon capture (PCC), where CO2 is removed after the fuel burning, is a crucial solution for reducing greenhouse gas emissions from natural gas power plants (NGPPs). However, high costs and energy penalties associated with PCC technologies hinder their widespread adoption. Recent advancements in hybrid PCC configurations have shown promise in improving efficiency and reducing costs. In effect, six PCC hybrid configurations below were identified as feasible process routes: • 2S-AB +AD: Two-stage Absorption + Adsorption hybrid • 2S-AB +MB: Two-stage Absorption + Membrane hybrid • 2S-AD +AB: Two-stage Adsorption + Absorption hybrid • 2S-AD +MB: Two-stage Adsorption + Membrane hybrid • 2S-MB +AB: Two-stage Membrane + Absorption hybrid • 2S-MB +AD: Two-stage Membrane + Adsorption hybrid Each hybrid has its own technical and economic challenges that need to be investigated in order to identify the best technique for carbon capture. In this paper, we performed Aspen Hysys design simulation of the six hybrids PCC configurations and also their economic evaluations using parameters like investment costs, operating costs, net present value, and rate of return, culminating in the use of three assessment parameters namely, levelized cost of electricity (LCOE), carbon emission intensity (CEI) and cost of carbon avoidance (COA), to evaluate the six hybrids PCC configurations and to determine the most viable option. Overall, it was found by dimensional analysis that the post combustion carbon capture using 2S-MB +AB: Two-stage Membrane + Absorption hybrid is the most viable for capturing CO2 from power generation plants and is hereby recommended. However, the choice of materials (membranes and absorbents) needs to be evaluated so as determined the best optimal configuration for commercialization.

Groundwater flow and transport models are essential tools for assessing and quantifying the mi-gration of organic contaminants at polluted sites. Uncertainties in the hydrodynamic and transport parameters of the aquifer have a significant effect on model predictions. Uncertainties can be quantified with advanced sensitivity methods such as Sobol’s High Dimensional Model Reduction (HDMR) and Variogram Analysis of Response Surfaces (VARS). Here we present the application of VARS and HDMR to assess the global sensitivities of the outputs of a transient groundwater flow model of the Gállego alluvial aquifer which is located downstream the Sardas landfill in Huesca (Spain). The aquifer is subject to the tidal effects caused by the daily oscillations of the water level in the Sabiñánigo reservoir. Global sensitivities are analysed for hydraulic heads, aquifer/reservoir fluxes, groundwater Darcy velocity and hydraulic head calibration metrics. Input parameters in-clude aquifer hydraulic conductivities and specific storage, aquitard vertical hydraulic conductiv-ities, and boundary inflows and conductances. VARS, HDMR and graphical methods agree to identify the most influential parameters which for most of the outputs are the hydraulic conduc-tivities of the zones closest to the landfill, the vertical hydraulic conductivity of the most permeable zones of the aquitard, and the boundary inflow coming from the landfill. The sensitivity of heads and aquifer/reservoir fluxes with respect to specific storage change with time. The aquifer/reservoir flux when the reservoir level is high shows interactions between specific storage and aquitard conductivity. VARS and HDMR parameter rankings are similar for the most influential parameters. However, there are discrepancies for the less relevant parameters. The efficiency of VARS was demonstrated by achieving stable results with a relatively small number of simulations.

One of the most common solutions to access underground is through the construction of circular shafts. At preliminary design stage analytical expressions are often used to estimate the horizontal earth pressure acting on the lining. However, most of these solutions are based on active state conditions and do not consider the restrictions imposed on the shaft lateral displacements by the rigidity of its lining or by the construction method employed. To overcome this limitation a new methodology to account with the shaft lateral displacements in the determination of the horizontal earth pressure acting on circular shafts is developed and validated against the results of relevant physical scale models. The obtained results show good agreement with the measured data, reproducing adequately the reduction of the horizontal earth pressure from its initial value to an active state condition with the increase of the shaft lateral displacement. Following this approach more realistic predictions of the earth pressure acting on the lining of circular shafts can be performed.

Mangroves are critical ecosystems providing essential environmental services, making their conservation crucial. High-resolution remote sensing, particularly through unmanned aerial vehicles (UAVs), offers unprecedented resolution in ecosystem mapping. This study utilizes a multispectral sensor mounted on a UAV to map mangroves at Cardoso Island on Brazil’s southeastern coast and Suape on the northeastern coast. Using Geographic Object-Based Image Analysis (GEOBIA) for segmentation and classification, we employed machine learning algorithms to classify the primary mangrove species: Laguncularia racemosa, Rhizophora mangle, and Avicennia schaueriana. Two flight altitudes were used: a higher altitude for broad-scale mapping and a lower altitude for classification training, supplemented by field measurements for calibration. This method enabled the precise delineation of tree crowns and provided insights into species distribution and zonation, influenced by the distinct estuarine conditions of tides and sediment input. The high-resolution mapping achieved in this study enhances detailed analyses of mangroves, improving ecological models and biophysical estimations such as biomass and blue carbon stocks. This work highlights the potential of UAV-based multispectral imaging in advancing mangrove research and conservation efforts.

Theoretical physics addresses the fundamental principles of nature and the mysteries of the universe. In the last century, the theory of relativity challenged people's understanding of time and space, while quantum mechanics revealed various forms of energy. However, the concept of gravity remains elusive. All matter in the universe is composed of energy that can be converted into other forms, yet it is always conserved. However, achieving a state of equilibrium, represented by the equal sign, can be challenging to achieve on both macro and quantum scales. A phenomenon that can transition from one state to infinity is called collision and is essential for understanding natural phenomena and physical processes throughout the universe. In the study of general relativity cannot be three-dimensional problems to gain mathematical inspiration, understand the application of new dimensions. Here, we elucidate the nature of gravity, which inspires the solution of the Riemann hypothesis. Our results show that the conduction mode of dimensional energy is defined by Euler's formula. And a special mode of collision is derived which translates into vibration.

Textile wastewater containing dyes pose significant environmental hazards. Advanced oxidative processes, especially the heterogeneous photo-Fenton process, are effective in degrading a wide range of contaminants due to high conversion rates and ease of catalyst recovery. This study evaluates the photocatalytic degradation of azo dyes Acid Red 18 (AR18), Acid Red 66 (AR66) and Orange 2 (OR2) using magnetite as a catalyst. The magnetic catalyst was synthesized via a hydrothermal process at 150°C. Experiments were conducted at room temperature, investigating the effect of catalyst dosage, pH, and initial concentrations of H2O2 and AR18 dye. Kinetic and thermodynamic studies were performed at 25, 40 and 60°C for the three azo dyes (AR18, AR66 and OR2) and the effect of the dye structures on the photocatalytic efficiency was investigated. At 25 °C for 0.33 mmol.L-1 of dyes at pH 3.0, using 1.4 g.L-1 of catalyst and 60 mg.L-1 of H2O2 under a UV radiation of 16.7 mW.cm-2 the catalyst showed a 62,3% degradation for AR18, 79.6% for AR66, and 83.8% for OR2 in 180 minutes of reaction. The oxidation of azo dyes under these conditions is spontaneous and endothermic. The pseudo-first order kinetic constants indicated a strong temperature dependence with an order of reactivity of the type: OR2 > AR66 > AR18, which is associated to the characteristics of molecular complexity (size, steric hindrance, aromatic conjugation), electrostatic repulsion and the nature of the acid-base interactions on the catalytic surface.

As high strength and ultra-high strength steels are widely used in all kinds of modern welded constructions, a lot of research is carried out to investigate the mechanical properties of weldments of these steels but there is a scarce information on such important characteristic as their corrosion behaviour. This research focuses on the corrosion behaviour of weld metal of weldments of S906QL and S700MC steels. Weld metal was tested electrochemically in a 3,5% NaCl aqueous solution via potentiodynamic scan to determine corrosion rate and its dependence on welding gap. No influence of welding gap on corrosion rate was found but the experimental results suggested that corrosion rate depended on the chemical composition of filler material and the microstructure of weld metal.

Hydrogen is in the spotlight in the energy world, and it will remain so for the next years. In Europe, the necessity to integrate ever growing amounts of Renewable Energy Sources (RES) in order to implement the ambitious European decarbonization policy (package Fit-for-55) and to preserve the security of energy supply (package Repower-EU) are feeding the interest in hydrogen. The paper will provide a thorough analysis of prospects and criticalities for the development of hydrogen both as a carrier and as a feedstock and, in definitive, as a key element for the implementation of the European decarbonization policies. First, the present regulatory framework will be highlighted, taking European Union as a main reference since it has presently one of the most advanced hy-drogen legislations in the world. Then, both hydrogen offer (technologies and) and demand (both as a feedstock and as an energy carrier) will be dealt with in detail. Two additional sections will take care to illustrate, respectively, the interactions between hydrogen and the electricity grid and the issues related to the creation of a liquid hydrogen market. Finally, a conclusion section will wrap up and summarize the most urgent issues to be tackled to create a well-functioning hydrogen economy.

Explainable Artificial Intelligence (XAI) plays a vital role in increasing transparency and trust in machine learning models, particularly when applied to tabular data which is used in domains such as finance, healthcare, and marketing. This paper presents an extensive survey of XAI techniques used with tabular data and aims to analyze recent research developments since 2021. The survey classes and describes several XAI techniques pertinent to tabular data, it identifies challenges specific to this domain, and explores potential applications and emerging trends. Future research directions are outlined, concentrating on the need for clear definitions of terminology used, data security, user-centric explanations, enhanced interaction, robust evaluation metrics, and advancements in adversarial example-based analysis. The aim is to contribute to the evolving field of XAI, and provide insights for effective, trustworthy, and transparent decision-making using tabular data.

The neuronal etiology of obesity is centered around diet-induced inflammatory state in the arcuate nucleus of the hypothalamus which impairs the functionality of pro-opiomelanocortine neurons (POMCs) responsible for whole-body energy homeostasis and feeding behavior. Intriguingly, systemic salt inducible kinase 2 (SIK2) knockout mouse demonstrated reduced food intake and energy expenditure along with modestly dysregulated metabolic parameters suggesting a causal link between the absence of SIK2 activity in POMCs and the observed phenotype. To test this hypothesis, we conducted a comparative secretomics study from POMC neurons following pharmacologically induced endoplasmic reticulum (ER) stress induction, a hallmark of metabolic inflammation and POMC dysregulation in diet induced obese (DIO) mice. Our data provide significant in vitro evidence for the POMC specific SIK2 activity in controlling the energy metabolism and feeding in DIO mice by regulating the nature of related POMC secretome. Our data also suggests that under physiological stress conditions SIK2 may act as a gatekeeper for the secreted inflammatory factors and signaling molecules critical for cellular survival and energy homeostasis. On the other hand, in the absence of SIK2 gate opens leading to surge of inflammatory cytokines and apoptotic cues concomitant with the dysregulation of POMC neurons.

Soil formation results from the weathering and alteration of bedrock, influenced by climatic conditions and biotic factors, including living organisms. The mineralogical composition of the parent material, along with plant species and soil microorganisms, forms the foundational elements of an ecosystem's energy cycle. Afforestation in arid-semi arid regions plays a crucial role in preventing erosion and enhancing soil quality, offering significant economic and ecological benefits. This study assessed the impact of parent material diversity on soil physicochemical properties, microbial basal respiration (MR), and microbiological characteristics, as well as their subsequent effects on plant growth, 15 years post-afforestation. For this purpose, various soil physicochemical parameters, MR, soil microbial biomass carbon (Cmic), stoichiometry (microbial quotient= Cmic/Corg = qMic and metabolic quotient = MR/Cmic = qCO2), and tree growth metrics such as height and diameter were measured. The results of the one-way ANOVA indicated that afforested soils on limestone bedrock exhibited significantly better physicochemical and microbiological properties, as well as tree growth parameters, compared to those on andesite. Notably, sensitive microbial properties such as Cmic, MR, and qMic were positively influenced by afforestation. The highest Cmic (323 g C kg−1) and MR (1.3 CO2–C g−1 h−1) values were recorded in limestone-derived soils. Currently, the measured properties of soils can be ranked as LS>AS>LC>AC. Conversely, the highest qCO2 values were observed in the control plots of andesite parent material (7.22). This study highlights the importance of selecting appropriate parent material and understanding soil characteristics to optimize afforestation efforts in bare areas. As a result, the higher plant growth capacity and carbon retention of limestone soil indicate that it has high microbial biomass and microbial activity (qMic).

Lotions with or without 28% ascorbyl glucoside arginine complex (AGAC) were applied twice daily for 24 weeks in a double‐blind half‐face study of 27 Japanese females with solar lentigos (SLs). Pigmentation scores were evaluated using a photo‐scale and skin colors were assessed using a color difference meter and a Mexameter. Treatment with the test lotion elicited a significant decrease in pigment scores at 24 weeks compared to week 0; with a significant decrease in pigment scores at 24 weeks compared to the placebo lotion‐treated SLs. In the test lotion‐treated SLs; the L values and melanin index (MI) significantly (p<0.0001) increased and decreased; respectively; at 12 and 24 weeks of treatment compared to week 0. Comparisons of increased L (△L) values or decreased MI (△MI) values between test and placebo lotion‐treated SLs demonstrated that the test lotion‐treated SLs had significantly higher △L or △MI values than the placebo lotion‐treated SLs both at 12 and 24 weeks of treatment. The sum of our results strongly indicates that AGAC is distinctly effective in ameliorating the hyperpigmentation levels of SLs at a visibly recognizable level by the subjects without any hypo‐pigmenting effects or skin irritation.

We analyzed data of pediatric invasive fungal diseases of the central nervous system (CNS-IFDs) reported by five of total eight Pediatric Hematology-Oncology Departments in Greece for 15 years (2007-2022). A total of twelve patients (11 boys, median age: 9.5yrs range: 2-16) were reported suffering from CNS-IFDs. Underlying malignancy was acute lymphoblastic leukemia in 9/12, and acute myeloid leukemia, Ewing sarcoma and rhabdomyosarcoma in one each. Eleven patients presented with CNS-related symptoms (i.e seizures, headache, cerebral palsy, ataxia, hallucination, seizures, blurred vision, amaurosis). All patients had pathological MRI findings. Multifocal fungal disease was observed in 6/12 patients. Nine proven and three probable CNS-IFD cases were diagnosed. Causative pathogens in proven cases were Aspergillus spp. and Candida albicans (n=2 each), Mucor spp., Rhizopus arrhizus, Absidia spp., Fusarium oxysporum and Cryptococcus neoformans (n=1 each). Causative pathogens in probable cases were Aspergillus spp. (n=2) and Candida spp. (n=1). All patients received appropriate antifungal therapy (median duration: 69.5 days, range 19-364). Two patients underwent additional surgical treatment. Six patients admitted to ICU due to complications. Three patients (25%) died, two due to IFD and one due to underlying disease. Early recognition and prompt intervention of CNS-IFDs may rescue the patients and improve overall survival.

Introduction: Errors are very common in medical practice —and in particular in the healthcare of patients with inflammatory bowel disease (IBD); however, most of them can be prevented. Aim: To address common errors in the management of IBD. Methods: Our approach to the problem will consist in identifying mistakes frequently observed in clinical practice (according to our experience) in the management of patients with IBD, then reviewing the scientific evidence available on the subject, and finally proposing the most appropriate recommendation in each case. Results: The most common mistakes in the management of IBD include those related to diagnosis and differential diagnosis, prevention, nutrition and diet, treatment with different drugs (mainly 5-aminosalicylates, corticosteroids, thiopurines, and anti-TNF agents), extraintestinal manifestations, anemia, the elderly patient, pregnancy, and surgery. Conclusions: Despite the availability of guidelines for both disease management and preventive aspects of IBD care, a considerable variation in clinical practice still remains. In this review, we have identified common mistakes in the management of patients with IBD in clinical practice. There is a clear need for greater dissemination of clinical practice guidelines among gastroenterologists and for the implementation of ongoing training activities supported by scientific societies. Finally, it would be desirable following IBD patients in specialized units, which is undoubtedly associated with higher quality healthcare and a lower likelihood of errors in managing these patients.

In diabetic foot injury prevention, no studies relate physical activity with the inflammatory response of the plantar tissues, evaluated by thermography and pressure distribution. These measurements are easy to be implemented in diabetic foot follow-up. The objective of this study was to analyze whether the plantar skin response, evaluated with thermography, after physical activity in healthy or diabetic patients, is a foot ulcer prognostic tool and to asses if there is a correlation between exercise intensity, plantar pressure and plantar thermographic response. A systematic review was carried out following Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) format in the PubMed, Scopus and Web of Science databases, with no year limit during the second quarter of 2024. A total of 14 studies have been included in this review. The use of infrared thermography for early inflammatory tissue detection, plantar pressures and the monitoring of controlled physical activity, make possible to monitor changes that allow the identification of patients at risk of developing foot ulcers.

Plug and abandonment (P&amp;A) operations demand valuable time and resources with operational procedures and materials to establish the well barrier element. This study proposes the use of a water-based fluid as a liquid well barrier element for temporary abandonment, based on esti-mates of its lifespan and survival probability on downhole conditions acquired through acceler-ated life tests. For that, the water-based formulation was tested and exposed to 95, 110, 140 and 150°C, for time intervals ranging from 1 to 10 days. After temperature exposure, the fluid prop-erties were verified and failure was detected by accounting for any deterioration in rheological parameters and/or a substantial increase in filtrate volume. Statistical analysis of failure data was performed in R software using Weibull Model, and fluid average lifespan and survival probability were estimated for P&amp;A temperatures. The results obtained demonstrates that the degradation of the fluid only was observed for 140 and 150°C and is mostly related to the CMC deterioration. The reliability metrics shows that until 80°C the fluid is a promising alternative for temporary abandonment, with no need of monitoring. For higher downhole temperatures, theses metrics should be considered to define the maximum time of operation and requirements for monitoring management in the operation design.

Monitoring training load, recovery, and wellness in maturation ages is even more relevant than in adulthood, especially during congested schedules. The objective of this study was to quantify and describe the differences in external and internal load, recovery, and perceived wellness in elite under-16 female players during a period of three competitions in seven days, based on their participation during matches. An observational design was used to quantify external load (total distance, high-speed distance, and PlayerLoad), internal load (differential sRPE), as well as recovery and wellness of 18 international under-16 players during a development tournament. The external load pattern of the starting players was undulating, with matches showing the highest internal load values compared to training sessions and non-starters. Non-starters players (whether training or matches) showed similar external load and differential sRPE values throughout the tournament (p&gt;0.05). Starting players experienced higher internal load than non-starters during matches (p&lt;0.037), without differences between training sessions (p&gt;0.05). No changes were seen in wellness or recovery (all p-values &gt;0.05), except for non-starters in session 3 compared to session 7 (p=0.024). Starting players had more weekly total minutes (p=0.018), differential sRPE (breath: p=0.002; leg: p=0.002; cognitive: p=0.003), total distance (p=0.003), and PlayerLoad (p=0.008) than non-starters. Our results indicate differing load patterns between starters and non-starters, which do not affect wellness and recovery differently. Starters accumulate more weekly total load. Coaches can use these findings to guide decisions and load compensations in high competition contexts for young female soccer players.

I present a personal account of self-organizing systems. As such, it is necessarily biased and partial. Nevertheless, it should be useful to motivate useful discussions. The relevant contribution is not my attempts at answering questions (maybe all my answers are wrong), but the steps towards framing relevant questions to better understand self-organization, information, complexity, and emergence. With this aim, I start with a notion and examples of self-organizing systems (what?), continue with their properties and related concepts (how?), and close with applications (why?).

A major problem of the technological production process of the metallurgical-grade silicon is formation of a large amount of microsilica. However, this material can be a significant source of raw materials for its own production. Hence, this study is aimed to solve the problem of micro-silica utilization, i.e. the technogenic dust-like waste generated during the melting of the technical-grade silicon. Within this study, the technology of the joint briquetting of microsilica was investigated with the carbonaceous reducing agents, i.e. by obtaining of mono-charge and by melting of the technical-grade silicon from the obtained mono-charge in the 200kVA ore-thermal furnace. Results of the study show that the briquettes in the melting process of the technical-grade silicon can be used in the range from 0 to 50%. The using of briquettes may significantly improve the technological parameters. When briquetted charge is applied only, the technological parameters will deteriorate significantly. The material balance of silicon melting showed the recovery rates of the main elements (Si, Al, Ca and Fe). It recorded a decrease in content of aluminum from 1.9-2.1% to 0.5-0.7%, calcium from 0.2-0.3% to 0.07-0.1% and titanium from 0.2-0.23% to 0.11-0.13% during the transition to briquetted monocharge. Phosphorus content increased from 0.004-0.005 to 0.011-0.013%.

This study aimed to evaluate the impact of the built environment (i.e., walk, transit, and bike scores) on the location and transportation or “alternative transportation” credit (LTc1) in Leadership in Energy and Environmental Design for Existing Buildings version 4 (LEED-EB-v4) Platinum (n1 = 24), Gold (n2 = 112), Silver (n3 = 46), and Certified (n4 = 34) office buildings in the USA. Spearman’s test was used to estimate the correlation between built environment scores and LTc1 scores for each certification level. The Wilcoxon–Mann–Whitney test was used to estimate pairwise comparison between unpaired Platinum, Gold, Silver, and Certified groups. The Platinum, Gold, and Silver certification levels showed positive and significant correlations between the built environment and LTc1 (0.44 ≤ r ≤ 0.74, p ≤ 0.0312). By contrast, Certified certification levels showed a non-significant correlation (0.18 ≤ r ≤ 0.33, p ≥ 0.0579). Pairwise comparison showed that Platinum and Gold groups outperformed Certified groups in terms of built environment and LTc1 scores (Cliff’s δ ≥ 0.37, p ≤ 0.0099). Thus, for LEED-EBv4-certified projects located in downtown areas, LTc1 can be seen as a significant lever to achieve high levels of LEED certification.

Long COVID, also referred to as post-COVID-19 condition, describes the lingering after-effects of COVID-19 infection. This complex syndrome encompasses a range of symptoms affecting physical well-being, cognitive function, and mental health. The widespread impact of long COVID extends beyond individual sufferers, placing significant strain on healthcare systems and causing far-reaching socioeconomic consequences. The scale of this multifaceted health crisis is unparalleled in recent history, affecting millions globally and challenging our understanding of post-viral conditions. This study aimed to explore the possibility of targeting G protein-coupled receptors (GPCRs) signaling pathway-related genes as therapeutics for long COVID using computational analysis. Targeting GPCRs and their signaling pathways holds significant promise for long COVID therapeutics, as these receptors are involved in crucial physiological processes including immune regulation, inflammation control, and neurotransmission. All of these are implicated in the diverse and persistent symptoms of long COVID, potentially offering a versatile approach to addressing multiple aspects of the condition simultaneously. This study identified 21 genes associated with GPCRs for further exploration as potential targets. Notably, GPCR genes such as HRAS, KRAS, GNAQ, and GNA11 were determined to be possible therapeutic targets for the pathophysiological mechanisms of long COVID. FDA-approved drugs targeting these genes were identified, including Binimetinib, Cabozantinib, Selumetinib, Panitumumab, Cetuximab, Adagrasib, Tipifarnib, and Sotorasib. Additionally, Naltrexone and Tipifarnib have emerged as potential new treatment options for long COVID. SARS-CoV-2 may hijack GPCR signaling pathways to dysregulate lung ion and fluid transport, contributing to the pathophysiology of pulmonary edema in patients with COVID-19. Further research is required to translate the findings into the development of therapeutics and to investigate the relationship between viral infection and GPCR signalling.

Graph query languages such as Cypher are widely adopted to match and retrieve data in a graph representation, due to their ability of retrieving and transforming information. Despite the most natural way to match and transform information is through rewriting rules, those are scarcely or partially adopted in graph query languages. Their inability of doing so has a major impact on the subsequent way the information is structured, as it might then appear more natural to provide major constraint over the data representation so to consequently constraint the way the information should be represented. On the other hand, recent works are starting to move towards an opposite direction, as the provision of a truly general semistructured model (GSM) allows to both represent all the available data formats (Network-Based, Relational, and Semistructured) as well as support an holistic query language expressing all major queries in such languages. In this paper, we show that the usage of GSM enables the definition of a general rewriting mechanism which can be expressed in current graph query languages only at the cost of adhering the query to the specificity of the underlying data representation. We formalise the proposed query language in terms graph rewriting mechanisms described as a set of production rules $L\to R$ while providing restriction to the characterization of L, while extending it to support structural graph nesting operations, useful to aggregate similar information around an entry-point of interest. We discuss how GSM, by fully supporting index-based data representation, allows for a better physical model implementation leveraging the benefits of columnar database storages. Preliminary benchmarks shows the scalability of this proposed implementation in comparison with state-of-the-art implementations.

Oxidative stress, characterized by an imbalance between the production of reactive oxygen species (ROS) and the body's antioxidant defenses, significantly affects cellular function and viability. It plays a pivotal role in modulating action potentials (APs), essential for properly functioning excitable cells such as neurons, smooth muscles, pancreatic beta cells, and myocytes. The interaction between oxidative stress and AP dynamics is crucial for understanding the pathophysiology of various conditions, including neurodegenerative diseases, cardiac arrhythmias, and ischemia-reperfusion injuries. This review explores how oxidative stress influences APs, focusing on alterations in ion channel functionality, signaling pathways, and membrane properties. By integrating current research, we aim to elucidate how oxidative stress contributes to disease progression and discuss potential therapeutic interventions targeting this interaction.

Treatment of HIV-associated lymphoma (HIV-Ly) with autologous stem cell transplantation (ASCT) has shown a surprisingly low relapse rate in several series. The aim of this study was to compare the clinical outcomes of HIV-Ly and lymphomas of the general population receiving ASCT. We compared two series of consecutive HIV-positive and HIV-negative patients, based on a 1:1 propensity score analysis, matching for age, sex, histology, disease status and prior therapies. We identified 44 patients in both groups. All HIV-positive patients received combination antiretroviral therapy (cART). With a median follow-up of 51 months, PFS was significantly higher in HIV-positive patients (4-years PFS 81% and 51%, in HIV-positive and HIV-negative patients, respectively, p=0.027). Four-year OS was 81% for HIV-positive and 67% in HIV-negative patients (p=0.15). The relapse rate was significantly higher in HIV-negative patients (36% vs 23%) (p=0.04). Our results clearly show that ASCT is an effective curative option for HIV-Ly, with better PFS and lower relapse rate compared to uninfected patients. A favourable effect of ASCT on HIV infection and immune system recovery, potential off-target effects of cART or other yet unknown factors may account for this observation.

Cruciferous vegetables represent a valuable source of bioactive compounds. However, there is currently a paucity of information regarding the extent to which these compounds remain bioavailable to the body following thermal treatment and digestion processes within the digestive tract. Accordingly, the aim of this study was to evaluate the impact of heat treatment and in vitro digestion on the level of selected bioactive compounds in Brussels sprouts. The Brussels sprouts samples were subjected to a range of thermal processing techniques, which were then followed by a simulated in vitro digestion. The investigated compounds were analysed using UV-Vis spectrometry and liquid chromatography coupled to mass spectrometry (LC-MS). The findings revealed that the sous-vide method of cooking Brussels sprouts resulted in significantly higher losses of glucosinolates (GLS) in comparison to conventional cooking methods. No significant differences were observed with regard to isothiocyanates and indoles. The analysis of GLS following digestion revealed that the process was more effective after sous vide and traditional cooking, and slightly less effective after steam cooking. With regard to individual compounds, glucoraphanin (GRA), glucoraphenin (GIV) and gluconasturtiin (GNS) were found to be completely degraded, whereas methoxyglucobrassicin (metGBS) was the most resistant to digestion in both the sous vide and steamed Brussels sprouts. The results indicated that the process of simulating digestion had no significant effect on isothiocyanates and indoles. This suggests that, if present in the heat-treated samples, these compounds remained stable during the in vitro digestion procedure.

Papillomaviruses (PVs) are oncogenic and infect the skin and mucosa of various host species. Considering the recent advances in research on PVs using rolling circle amplification (RCA) followed by high-throughput sequencing (HTS), in this study, we aimed to investigate the bovine papillomavirus (BPV) types associated with proliferative lesions in the upper alimentary tract of an affected bull and characterize the viral strains through complete genome sequencing using this strategy. We analyzed the PV strains associated with two hyperplastic esophageal lesions through PCR using degenerate primer pairs and RCA, followed by HTS. HTS of the libraries generated using RCA products provided the whole genome sequence of BPV4 present in squamous papilloma, whereas, the complete genome sequence of BPV2 and subgenomic fragments of BPV4 were identified in carcinoma in situ (CIS). We, for the first time, have sequenced BPV2 identified from the CIS of the bovine upper alimentary canal. Additionally, RCA followed by HTS allowed characterization of the mixed infection by BPV2 and BPV4 in this lesion. These data reveal that BPV4 is not the only BPV type present in CIS of the esophageal mucous membrane; moreover, a mixed infection caused by BPV2 and BPV4 at the tested anatomical site was demonstrated.

In aerospace, robotics, network engineering and mechanical engineering, there exist complex and urgent challenges that can be abstracted into mathematical optimization problems. Therefore, exploring solutions to these optimization problems is a crucial task. Metaheuristic algorithms have been applied across various fields.The Snake Optimization Algorithm (SO) is an innovative metaheuristic method recognized for its efficient solving capabilities.However, this algorithm encounters challenges such as diminished search efficiency in the later stages and a propensity to become ensnared in local optima. To mitigate these issues, this paper introduces an enhanced Snake Optimization Algorithm (ISO). ISO integrates the RIME Algorithm(RIME)and introduces two effective enhancement strategies to improve its capability to evade local optima.To assess the effectiveness of ISO,the population distribution state was first measured using three algorithms, including Star Discrepancy, and the exploration and exploitation performance was analyzed using the CEC2017 test functions. Subsequently, utilized 23 benchmark functions for testing.The evaluation outcomes indicate that ISO exhibits outstanding performance in terms of convergence velocity and robustness.Additionally, it was applied to engineering fields including UAV path planning,Robot path planning, Wireless sensor network node deployment and Pressure vessel design.In comparison to the SO algorithm, the ISO algorithm demonstrates superior stability, converges earlier, and improves its ability to solve for optimal .These findings highlight the significant potential of the ISO algorithm in diverse test functions and a wide range of interdisciplinary problems.

African yam bean (Sphenostylis stenocarpa Hochst, Ex. A. Rich. Harms) is an important grain legume in sub-Saharan Africa because of its nutritional value and adaptability to various agroecological zones. To foster the varietal development of improved African yam bean (AYB) genotypes with economic traits, it is necessary to validate parental polymorphism for key markers in selecting progenies from crosses between desired parents. The study aims to analyze the genetic fidelity between parents and F1 progenies in African yam bean through putative cowpea Simple sequence repeat (SSR) markers. Hence, a total of seventy-seven progenies were derived from four sets of biparental crossings using drought-susceptible (TSs-96, TSs-363, and TSs-274) and drought-tolerant (TSs-417, TSs-111, and TSs-78) AYB accessions. These were validated using 120 cowpea primers targeting SSR under optimal PCR conditions, and the size of the PCR-amplified DNA fragments was checked using gel electrophoresis. Twenty primers exhibited polymorphism in the parental lines, while ten displayed higher levels of the same polymorphism. The average polymorphism level for the surveyed SSR markers was 0.36. Given these findings, our study demonstrates that cowpea SSR markers are a reliable method for regular testing and clear identification of AYB crosses, indicating potential AYB improvements.

(1) Background: better mechanistic understanding of desmosome disruption and acantholysis in Grover disease (GD) may improve management of this disease. Recent molecular studies highlighted promising pathways to be explored, by directly comparing GD and selected features of associated skin diseases. The association between GD and cutaneous keratinocyte carcinomas, the most prevalent non-melanoma skin cancers (NMSC), is not completely characterized. (2) Objective: To review the medical literature regarding GD-associated cutaneous keratinocyte cancers, focusing on molecular features, pathophysiological mechanisms and disease associations, to help guide future research and patient management. (3) Result: GD has been associated with a variety of skin conditions, but its association with skin cancers has been rarely reported. Between 1983 and 2024 only 9 scientific papers presented data supporting this association. Interestingly, we found that GD may mimic multiple NMSCs, as few authors reported GD cases misdiagnosed as multiple cutaneous squamous cell carcinomas for more than 4 years, or the presence of superficial basal cell carcinoma–like areas associated with focal acantholysis. (4) Conclusions: (a) GD may be an imitator of multiple NMSCs and (b) the relationship between GD and NMSCs may reveal promising pathways for the mechanistic understanding of desmosome disruption and acantholysis in GD and may even lead to its reclassification as a distinctive syndrome.

The semi-active cab suspension system for trucks is gaining increasing importance due to its economic advantages, low energy consumption, and significant enhancement of ride comfort. This paper investigates the effects of three control methods on improving ride comfort of semi-active cab suspension systems under random and bump road conditions: Proportional-Integral-Derivative (PID) control, fuzzy PID control, and Model Predictive Control (MPC). Initially, an accurate multi-degree-of-freedom truck cab suspension model was developed and validated through actual road tests. Based on this model, three control strategies were designed and implemented. Finally, the effectiveness of each control strategy was evaluated under various road conditions, including random and bump road scenarios. The results demonstrate that these control strategies can effectively reduce vibrations and impacts, significantly enhancing ride comfort, which is crucial for reducing driver fatigue and improving driving safety.

This study analyzes future hydrological droughts in LCKW using the SWAT model and data from 2010-2021, evaluating the Streamflow Drought Index (SDI) for 5, 10, 25, and 50-year return periods (RP) for 2029 and 2039 under RCP4.5 and RCP8.5 scenarios. The model shows high accuracy (R² = 0.82, NSE = 0.78). Under RCP4.5, streamflow may increase by 34.74% and 18.74%, while RCP8.5 predicts significant decreases of 37.06% and 55.84%. Historical data reveal frequent short-term droughts during SDI-3, notably in 2014–2016 and 2020–2021, with SDI-6 indicating less frequent but severe droughts, especially in 2015 and 2020. Future projections under RCP8.5 suggest wors-ening drought conditions in 2029 and 2039, with critical drought periods from January to April and November. Wavelet analysis indicates a high risk of severe hydrological drought in LCKW due to low annual recurrence rates, with the highest drought severity over a 50-year RP. The study high-lights an increasing likelihood of frequent and severe droughts, particularly under high emission scenarios such as RCP8.5, which could result in significant water shortages and ecosystem disrup-tions. It emphasizes the significance of adaptive water resource management strategies in mitigating negative impacts on water security and ecosystem health.

Background. The possible interactions between anger and fear have not been widely explored in the psychological literature. Fear and anger are currently beginning to be studied by looking at their interrelationships, rather than seeing them as simply opposing emotions. Furthermore, there is a tendency to think that anger is more typical of men and fear of women. Our contribution proposes a particular perspective of affective neuroscience. The objectives of the study are: 1) To assess possible differences in affective systems, states, and traits of anger in relation to biological sex; 2) To assess correlations between ANGER, FEAR, and PANIC, state and trait anger in both a female and male sample; 3) To assess possible differences in basic affective systems in relation to different levels of ANGER, FEAR, and PANIC, state and trait anger, in sample of female and in sample of male. Methods. A non-clinical sample of 339 females and 99 males completed the ANPS 3.1 to assess basic affective states and the STAXI 2 to assess anger states and traits. Results. No significant differences were found for ANGER and FEAR scores and for state and trait scores between the male and female samples. Clear correlations emerged (p < .01) between FEAR. PANIC and FEAR in both the female and male samples. Among the differences that emerged in the affective systems, we emphasise that in the female group as FEAR increases, there are significant variations in systems of SEEKING, PLAY, and CARE. Furthermore, only in the female sample as PANIC increases, PLAY progressively decreases, and CARE shows an irregular trend. Discussion. Given the importance of the SEEKING and PLAY systems for well-being and gender equality the hypoactivation of these systems to increases in FEAR and PANIC highlights the need to monitor conditions that may trigger these affective systems.

Abstract: Reducing levels of low-density-lipoprotein-cholesterol (LDL-C) below recommended thresholds is a core component of cardiovascular prevention strategies. We hypothesized that the addition of bempedoic acid to patients already on statin-ezetimibe therapy was more effective than titrating the statin dose in reducing LDL-C. The study enrolled 120 patients at high cardiovascular risk, and with LDL-C above 70 mg/dl. They were randomly divided in two groups: bempedoic acid (BA) group, taking bempedoic acid in addition to statin plus ezitimibe, and the statin titration (ST) group including patients who doubled the dose of statin. At 12-weeks, BA group presented a greater significant decrease of LDL-C compared to ST group (-22.9% vs 7.5% p 0.002). Total-cholesterol decreased significantly in the BA group compared to ST (-14.8% vs-4.7% ; p 0.013) No significant between-groups changes in HDL and triglycerides occurred. At 12 weeks the number of patients who reached LDL-C lower than 70 mg/dl was 38 (63%) in the BA group versus 22 (37%) in the ST group (between group p 0.034). In the BA group the LDL lowering effect of bempedoic acid was similar between patients taking atorvastatin and rosuvastatin. No side effects occurred during the follow up period. In conclusion, the addition of Bempedoic acid to statin/ezetimibe combined treatment was more effective than doubling the dose of statin in reducing LDL-C. levels and increased the number of patients reaching the LDL-C goal.

KThe promising possibility of organic photodetector (OPD) is emerging in the field of sensing applications for its tunable absorption range, flexibility, and large-scale fabrication abilities. In this work, we fabricated bulk heterojunction OPD with a device structure of glass/ITO/PEDOT:PSS/ P3HT:PC61BM/Al by spin coating process and characterized the dark and photocurrent at different applied bias conditions for red, green, and blue incident LED light. OPD photocurrent density exhibited up to 2.5–3 orders higher magnitude compared to the dark current density at -1 V bias while it increased up to 3–4 orders at zero bias conditions for red, green, and blue lights showing an increasing trend higher voltage applied in the negative direction. Different OPD inner periphery shapes, OPD to LED distance, and OPD area were also considered to bring the variation in OPD dark and photocurrent, which can affect the on/off ratio of the OPD–LED hybrid system and is a critical phenomenon for any sensing application.

This study investigates the optical properties of Yttrium Orthoferrite thin films fabricated via plasma laser deposition. Yttrium Orthoferrite, a ferrimagnetic material known for its potential applications in spintronics and photonics, was deposited on single-crystal substrates under controlled conditions to analyze its optical characteristics. The influence of deposition time, on the film quality and optical properties was examined.

This article examines the sustainability of beer production through a review of the available scientific literature. Beer production, a beverage of both cultural and industrial importance at a global level, significantly impacts the environment due to the use of natural resources and emissions generated during the various stages of the production process. This study adopts the Life Cycle Analysis (LCA) approach to assess the environmental impact of beer production, from the extraction of raw materials to the disposal of the finished product. Only peer-reviewed studies published between 2001 and July 2024 that address at least one stage of the beer production process were included in the review. The results highlight the critical points of the production cycle and suggest sustainable practices to reduce the environmental impact. This study provides a detailed overview of LCA methods applied to beer production, including defining objectives and scope, life cycle inventory, impact assessment and interpretation of results, and providing recommendations to improve sustainability in the brewing sector. The objectives of this study were to identify the critical point within the beer production cycle that significantly contributes to environmental impacts and to suggest sustainable practices and strategies that can be adopted to reduce the environmental footprint of beer production.

Objectives. The aim of the study is to identify relevant research topics based on pooled bibliometric data of International Journal of Hydrogen Energy publications from 2022-2024, collected from The Lens and ScienceDirect platforms. Data source. Bibliometric records of International Journal of Hydrogen Energy articles published in 2022-2024 from The Lens and ScienceDirect platforms were used. Programs and utilities used. VOSviewer, Scimago Graphica, Inkscape, FP-growth utility. Results. The study showed the feasibility of merging bibliometric records from the open platforms ScienceDirect and The Lens, which complement each other. The 'Fields of Study' data of The Lens can be rationally interpreted as system keywords similar to Scopus Index Keywords. The possibility of using 'Fields of Study' data in a method similar to bibliographic coupling is shown. The practicality of using an Alluvial diagram to show the co-occurrence of the four terms was demonstrated. The study also emphasizes the advisability of joint use of VOSviewer and Scimago Graphica programs for complex visualization of bibliometric analysis results. The study identified two dominant publication topics in International Journal of Hydrogen Energy for 2022-2024, which can be described in terms of: 'Catalysis, Hydrogen, Physical_chemistry, Chemical_engineering, Nanotechnology, Electrochemistry, Organic_chemistry, Materials_science' and 'Electrical_engineering, Hydrogen_production, Renewable_energy, Environmental_science, Hydrogen_economy, Hydrogen, Engineering'.

This text deals with exploring random solutions for generalized nonlinear variational inequality problems. Using the Fan-KKM theorem and Aumann's measurable selection theorem, we are able to prove the existence and uniqueness of random solution sets under the conditions of monotonicity and convexity. Additionally, we use Minty's lemma to demonstrate the compactness and convexity of the random solution sets.

While the concept of a circular economy offers the solutions necessary to enable economies to move away from consumptive, wasteful practices and towards more sustainable alternatives, in practise, few economies have been able to transition to circularity. The purpose of this paper is to investigate the feasibility of a circular economy on a small-scale university campus, leveraging both research by sustainability-focused academics, and attitudes of students who generally care more about sustainability than older cohorts [1]. It begins with a literature review based on five identified pillars of circularity [2]: waste management; data management; business operations and infrastructure; policy and regulation; and education and collaboration. A qualitative methodology was adopted, involving a series of interviews with campus representatives either working or researching some element of sustainable circularity. By bringing together dedicated scholars with knowledge and capacity and a motivated consumer target, all in one location, we present a framework for a Campus Circular Economy (CCE) with potential for replication to advance sustainable consumption in campus environments and beyond.

By introducing final goods trade, intermediate goods trade, and factor-strengthening technology spillovers, along with technology absorption thresholds into the global value chain, this paper builds a global dynamic recursive general equilibrium model. This model can simulate China's technological progress driven by both 'internal' and 'external' (trade and FDI) dual circulations. Eight scenarios are employed to test and demonstrate whether China can follow the dual-circulation pattern and achieve the 2035 economic vision. The main conclusions are as follows:: (1) If China maintains its trade opening policy, the 2035 vision goal can be achieved, with external circulation being more important than internal for technological spillovers; (2) The economic growth impacts of external and internal circulations operate relatively independently. However, Foreign Direct Investment (FDI) provides a relatively larger synergistic effect to all forms of external trade circulation; (3) Regarding international trade partners, we find that RCEP is the most important strategic partner to China; (4) Apparently, FDI is not an effective way to lift the productive services sector's TFP, and China's realistic choice is to open the productive services market wider, as its efficiency is a pivotal reflection of China's independent innovation capability; (5) For factor-strengthening effects, spillovers are more favorable to 'capital' than to other kinds of labor; (6) The impact of China-US decoupling is enormous to the world. In all the scenarios we have envisioned, the United States is always the country that loses the most, and Europe would be the group of countries to benefit when there is a large increase of TFP in the US.

This article provides a proof that the Ramanujan's Inequality given by, $$\pi(x)^2 < \frac{e x}{\log x} \pi\Big(\frac{x}{e}\Big)$$ holds unconditionally for every $x\geq \exp(59)$. In case for an alternate proof of the result stated above, we shall exploit certain estimates involving the Chebyshev Theta Function, $\vartheta(x)$ in order to derive appropriate bounds for $\pi(x)$, which'll lead us to a much improved condition for the inequality proposed by Ramanujan to satisfy unconditionally.

In recent years, artificial intelligence technology has seen increasingly widespread application in the field of intelligent manufacturing, particularly with deep learning offering novel methods for recognizing geometric shapes with specific features. In traditional CNC machining, computer-aided manufacturing (CAM) typically generates G-code for specific machine tools based on existing models. However, the tool paths for most CNC machines consist of a series of collinear motion commands (G01), often resulting in discontinuities in the curvature of adjacent tool paths, leading to machining defects. To address these issues, this paper proposes a method for CNC system machining trajectory feature recognition and path optimization based on intelligent agents. This method employs intelligent agents to construct models, analyze the key geometric information in the G-code generated during CNC machining, and uses the MCRL deep learning model incorporating linear attention mechanisms and multiple neural networks for recognition and classification. Path optimization is then carried out using mean filtering, Bezier curve fitting, and an improved novel adaptive coati optimization algorithm (NACOA) according to the degree of unsmoothness of the path. Taking the optimization of a gear model’s process file as an example, the effectiveness of the proposed method is verified. The research results indicate that the CNC system machining trajectory feature recognition and path optimization method based on intelligent agents can significantly enhance the smoothness of CNC machining paths, reduce machining defects, and has substantial application value.

Based on an in-depth analysis of the factors influencing the compressive strength of ultra-high performance concrete (UHPC), this study examined the impact of both single factors and combined factors on UHPC performance using experimental data. The correlation analysis indicates that cement content, water content, steel fiber, and fly ash significantly affect the strength of UHPC, whereas silica fume, superplasticizers, and slag powder have a relatively smaller influence. This analysis provides a scientific basis for model development. Furthermore, the support vector regression (SVR) model was optimized using the arithmetic optimization algorithm (AOA). The superior performance and computational efficiency of the AOA-SVR model in predicting UHPC compressive strength were validated. Compared to SVR, support vector machine（SVM）, and other single models, the AOA-SVR model achieves the highest R2 value and the lowest error rates. The results demonstrate that the optimized AOA-SVR model possesses excellent generalization ability and can more accurately predict the compressive strength of UHPC.

This study contributes to the Sybil nodes detecting algorithm in Online Social Networks (OSNs). As major communication platforms, online social networks get significantly guarded from malicious activity. A thorough literature review identified various detection and prevention Sybil attack algorithms. Additional exploration of distinct reputation systems and their practical application led to the study’s discovery of machine learning algorithms, i.e., the KNN, Support Vector Machines, and Random Forest algorithms. The study details the data cleansing process for the employed dataset in its process for optimizing the computational demands required to train machine learning algorithms, achieved through dataset partitioning. Such a process led to explaining and analysis of conducting experiments and comparing their results. Such experiments demonstrate the algorithm’s ability to detect Sybil nodes in OSNs (100% accuracy in SVM, 99.6% in Random Forest, and 97% in KNN algorithms); thus concluding by proposing future research opportunities.

This study aims to propose a method for constructing basic digital twin data in South Korea by adhering to international standards and utilizing publicly available data. Specifically, the study focuses on designing and proposing a digital twin data model for buildings, which are the most applicable among the basic digital twin data. To achieve this, the first section provides essential background information, introduces concepts and requirements related to digital twin basic data, and offers a brief overview of CityGML. The second section explains the methodology and data used in this study. The third section presents the main findings: the selection of public data (buildings) for constructing digital twin basic data, the mapping process using CityGML, and the creation of UML diagrams. The fourth section discusses these findings. Finally, the conclusion and suggestions for future research are provided. This approach enhances the accuracy of building-related digital twin data and supports the use of digital twin services in both public and private sectors by enabling various spatial analyses.

The COVID-19 pandemic has underscored the intricate interplay between viral infections and opportunistic bacterial pathogens such as Klebsiella pneumoniae. K. pneumoniae harbors various antibiotic resistance determinants like extended-spectrum and plasmid-mediated AmpC β-lactamases and carbapenemases. In the two years following the pandemic, carbapenemase producing K. pneumoniae isolates obtained routinely in outpatient and inpatient setting demonstrated similar resistance patterns which prompted research. The aim was to compare and subsequently analyze carbapenem-resistant hospital and outpatient’s K. pneumoniae isolates’ resistance mechanisms, traits and molecular epidemiology, following the COVID-19 pandemic. Disk diffusion and broth dilution method were the methods of choice to determine antibiotic susceptibility. β-lactamases were screened by phenotypic methods and confirmed with PCR. In total 113 isolates were analysed. Resistance to amoxicillin-clavulanate and ertapenem was confirmed in all strains. High resistance rates (over 90%) were observed for extended-spectrum cephalosporins, and ciprofloxacin. OKNV testing and PCR detected OXA-48 in 106, NDM in 7 and KPC in only one isolate. ESBLs accompanied carbapenemases in 103 isolates. Carbapenem resistance in K. pneumoniae is becoming a global problem, hence careful monitoring of its resistance traits is of utmost importance in order to combat the arising threat. OXA-48 seems to continue predominating in the turbulent period after pandemic.

Abstract: This in vitro study aimed to analyze the surface roughness (Ra) and color stability (ΔEab, ΔE00) following simulated mechanical brushing, and to evaluate the microtensile (μTBS) to dentin of Self Adhering Resin Flowable (SARF). The selected materials were Constic, Yflow AS, and Tetric N flow (TNF/control). Thirty composite resin cylinders were fabricated for surface property evaluation. Ra and color were assessed both before and after simulated brushing. The thresholds of 50:50% perceptibility and acceptability of color difference of the evaluated resins were assessed. For μTBS analysis, fifteen molars were selected, sectioned to expose flat dentin surfaces, and restored according to manufacturers' instructions. Subsequently, they were sectioned into sticks for microtensile testing. Statistically significant differences in Ra among the groups, with Constic exhibiting the highest Ra value (p < 0.05), while Yflow AS showed the lowest Ra value. No statistically significant difference in color was observed among the groups (p > 0.05). The 50:50% perceptibility and acceptability thresholds set at 1.2 and 2.7 for ΔEab and 0.8 and 1.8 for ΔE 00. All the results fell within the acceptable limits. The mean μTBS values of Constic, Yflow AS, and TNF were 10.649 MPa, 8.170 MPa, and 33.669 MPa, respectively. The study revealed increased Ra and comparable color stability among all tested composite resins after abrasion. However, SARF exhibited lower μTBS compared to conventional using an adhesive system.

Glioblastoma (GBL) is one of the more malignant primary brain tumors, currently treated by a multimodality strategy including surgery, radio- and chemotherapy, mainly consisting of Temozolomide(TMZ)-based chemotherapy. Tumor relapse often occurs due to the establishment of TMZ resistance, with a patient median survival

Understanding creation as divine kenosis, which has become rather widespread since the last century, may emphasize the strong connection between the creation theology and the key Christian doctrine of the Incarnation while contributing to the dialogue between theology and science. At the same time, this theological project requires a thorough rethinking of divine action to avoid representing divine agency and natural causality as the competitive factors and to affirm divine kenosis as the definitive trait of God without compromising divine simplicity and freedom. To this end, the concept of “divine kenotic creativity” is suggested and discussed in this paper.

This paper detects bidding behaviors in the auction with the random cutoff, where a winning bid needs to be above and the closest to the random cutoff. In this auction, each bidder is eager to predict the random cutoff in order to use the predicted random cutoff as bid. Furthermore, one of deep learning models, the transformer model is employed as one empirical method to anticipate the random cutoff. The result shows that the predicted random cutoff turns out to be a winner with probability of about 20 percent. This paper contributes to economic literature in terms of investigating the connection between a deep learning model and an auction based on the economic theory.

This study investigates the fabrication and characterization of large-sized ceramic-reinforced TWIP (Twinning-Induced Plasticity) steel matrix composites using the lost foam casting technique. Various ceramic shapes and sizes, including blocky, flaky, rod-like, and granular forms, were evaluated for their suitability as reinforcement materials. The study found that rod-like and granular ceramics exhibited superior structural integrity and formed strong interfacial bonds with the TWIP steel matrix, compared to blocky and flaky ceramics, which suffered from cracking and fragmentation. Detailed microstructural analysis using scanning electron microscopy (SEM) and industrial computerized tomography (CT) revealed the mechanisms influencing the composite formation. The results demonstrated that rod-like and granular ceramics are optimal for reinforcing TWIP steel composites, providing excellent mechanical stability and enhanced performance. This work contributes to the development of advanced composite materials with potential applications in industries requiring high-strength and durable materials.

Following the detection of highly pathogenic avian influenza (HPAI) virus in countries bordering Kenya to the west, we conducted surveillance among domestic and wild birds along the shores of Lake Victoria. In addition, between 2018 and 2020, we conducted surveillance among poultry and poultry workers in live bird markets and among wild migratory birds in various lakes that are resting sites during migration to assess introduction and circulation of avian influenza viruses in these populations. We tested 7,464 specimens (oropharyngeal and cloacal swabs) from poultry and 6,531 fresh fecal specimens from wild birds for influenza A viruses by real-time RT-PCR. Influenza was detected in 3.9% (n=292) of specimens collected from poultry and 0.2% (n=10) of fecal specimens from wild birds. On hemagglutinin subtyping, most of the influenza A positives from poultry (274/292, 93.8%) were H9. Of 34 H9 specimens randomly selected for further subtyping, all were H9N2. On phylogenetic analysis, these viruses were genetically similar to other H9 viruses detected in East Africa. Only two of the ten influenza A positive specimens from the wild bird fecal specimens were successfully subtyped; sequencing analysis of one specimen collected in 2018 was identified as low pathogenicity avian influenza H5N2 virus of the Eurasian lineage and the second specimen, collected in 2020, was subtyped as H11. A total of 18 OP/NS swabs from poultry workers with ARI (12%) were collected; none were positive for influenza A virus. We observed significant circulation of H9N2 influenza viruses in poultry in live bird markets in Kenya. During the same period, low pathogenic H5N2 virus was detected in a fecal specimen collected in a site hosting a variety of migratory and resident birds. Although HPAI H5N8 was not detected in this survey, these results highlight the potential for introduction and establishment of highly pathogenic avian influenza viruses in poultry populations and the associated risk of spillover to human populations.

The human eye is a vital source of collecting information worldwide via daily observation. The computer science area recognizes it in research as a human-computer interaction. Human blink is an integral part of this observation as a research topic. Several studies have been conducted on eye blinking and left-right eye movements. Previous studies conducted on the eye blink consider the availability of hardware devices high in the budget, high Precision, and low light expo-sure, unlike our study, which uses low-budget devices as simple as a webcam and more versatile usable techniques, incredibly both dim and high light to name a few. This study offers the observational approach via ResNet101v2, VGG-19, and Convolution Neural Network (CNN) architectures. Outperforming both VGG-19 and CNN in this study, ResNet101v2 achieves an impressive accuracy of 98.2%. In contemporary times, deep learning in AI is taking an advanced form. This study attempts to provide a new insight into the real-world implementation of the eye blink.

In order to explore the effect of Wickerhamomyces on the production of flavor compounds in Xiaoqu Baijiu, this study examined the correlation between the fungal communities in Xiaoqu and ester compounds. It was hypothesized that Wickerhamomyces contributes to the aroma of Xiaoqu. Enhanced fermentation methods were used to validate the role of Wickerhamomyces in Xiaoqu Baijiu brewing. Compared to traditional Xiaoqu, enhanced fermentation significantly increased the acidity of fermented grains and starch utilization rate (P<0.05). The fungal communities in fermented grains were analyzed by high-throughput sequencing technology. The dominant fungi in both control and test groups were Saccharomyces, Cyberlindnera, Rhizopus, and Meyerozyma, with Wickerhamomyces replacing Saccharomymycopsis in the enhanced group. Flavor compounds in the fermentation experiments were analyzed, revealing that ethyl acetate content in Xiaoqu Baijiu increased by 949.94 mg/L in the test group, while isoamyl alcohol decreased by 23.62 mg/L and isobutanol decreased by 34.81 mg/L. Functional prediction analysis using PICRUSt2 confirmed a higher relative abundance of enzymes involved in ethyl acetate metabolism and a lower relative abundance of enzymes involved in higher alcohol metabolism in the test group. These findings demonstrate that Wickerhamomyces enhances ethyl acetate production and reduces higher alcohols during Xiaoqu Baijiu brewing, offering a theoretical foundation for enhancing the quality of Xiaoqu Baijiu.

We assessed the impact of social determinants of health (SDOH) and psychosocial factors on screening behavior in a nationally representative sample of women in the US. A retrospective population-level cross-sectional sample was extracted from the 2022 Health Information National Trends Survey. Descriptive statistics were conducted for demographic characteristics and covariates. Population-based estimates with 95% confidence intervals (95% CI) were produced for Pap testing behaviors across study years. We used logistic regression models to assess Pap testing differences based on SDOH and psychosocial factors, adjusting for covariates, with a significance level of 0.05 for hypothesis testing. Women (n=2,224) with a mean age of 46.96 participated in the study. Our study found that 90% of women were interested in cervical cancer screening, with an 80% actual screening rate. Screening rates differed by age group and rurality. SDOH and psychosocial factors were associated with participants’ interest in screening and in actual screening behavior. The impacts of SDOH and psychosocial factors on screening behavior were 3% and 1%, respectively. The SDOH and psychosocial factors are associated with the uptake of cervical cancer screening among women in the United States. Policies must be directed at bridging the gap created by these SDOHs.

Stormwater runoff from large roads is a major source of pollutants to receiving waters. Porous pavements have been shown to substantially reduce many of these pollutants, but studies are lacking on arterial roads. We sampled typical stormwater pollutants in runoff from sections of an arterial road 9-16 years after installation of three pavement types: control with conventional asphalt, porous asphalt overly, and full-depth porous asphalt. Both types of porous pavements substantially reduced most of the stormwater pollutants measured. Total suspended solids, turbidity, total lead, total copper, and 6PPD-quinone were all reduced by &gt;75%. Total nitrogen, ammonia, total phosphorus, biochemical oxygen demand, total and dissolved copper, total mercury, total zinc, total polycyclic aromatic hydrocarbons, and di-2-ethylhexyl phthalate were all reduced by &gt;50%. Reductions were lower or absent for nitrate, orthophosphate, E. coli, dissolved lead, and dissolved zinc. Most reductions were statistically significant. Many pollutants exceeded applicable water quality standards in the control samples but met them with both types of porous pavement. This study demonstrates that porous overlays and full-depth porous asphalt can provide substantial reductions of several priority stormwater pollutants on arterial roads for many years after installation.

Texas cotton production is facing challenges arising from increased temperatures and extended droughts. One potential solution to mitigate these environmental stresses lies in enhancing soil health through measures aimed at increasing soil organic matter and microbial biomass. Our field study investigated the effectiveness of adding residue on soil surface to increase soil organic matter content, microbial biomass, and cotton production under experimental warming with open-top chambers (OTCs). The OTCs raised the air temperature by 2 °C but did not affect soil temperature. OTCs also increased microbial biomass and soil respiration rate. Residue addition increased moisture content in non-irrigated (i.e., dryland) soils under experimental warming and concurrently reduced the daily temperature range in warmed plots. Furthermore, residue addition increased microbial biomass and soil respiration, particularly under OTC treatments in dryland soils. We also observed increased soil organic matter, microbial biomass, cotton biomass, and yield in irrigated fields compared to dryland. Our findings suggest that residue retention can mitigate the adverse effects of warming by stabilizing soil microclimate and enhancing soil organic matter and microbial biomass levels, especially in drylands. This, in turn, can help attenuate the potential impacts of future climate change on soil health and crop production in semiarid environments.

Although metastasis-associated protein 1 (MTA1) is known to play a role in cancer invasion and metastasis of various cancers, the clinical significance of its expression in canine urothelial carcinoma (UC) has not been explored. We sought to evaluate the expression of MTA1, cyclooxygenase 2 (COX2) and E-cadherin (E-cad) in association with clinicopathological parameters in clinical samples of canine UC. Here, we show that MTA1 and COX2 are overexpressed in canine UC samples compared to normal canine bladder samples, whereas E-cad levels are higher in normal bladder. The results demonstrated that MTA1 expression correlated with aggressive clinicopathological features such as high tumor-grade, muscular/vascular invasion, and metastasis. The expression of MTA1 differed in tumors depending on their localization, with the highest being in the urethra adjoining the prostate. Unexpectedly, higher E-cad levels were detected in metastatic tumor cells compared to primary tumor cells. Overall, these findings suggest that MTA1 may represent a key upstream effector tightly associated with COX2 and E-cad-mediated events in canine UC. Accordingly, MTA1 may be considered a feasible interceptive and therapeutic target for canine UC treatment.

INTRODUCTION: While postmenopausal osteoporosis management evolved in recent years, it nonetheless remains underdiagnosed and undertreated. Given that general practitioners are the keystone of patient screening and referral in France, the present study was conducted to assess their professional positioning in the management of postmenopausal osteoporosis. METHODS: The present is a qualitative study based on semi-directed interviews, carried out between July 2020 and February 2021, with randomly chosen Alsatian general practitioners. Interviews were conducted until data saturation. Consolidated criteria for qualitative research reporting grid was used as well as Nvivo software to categorize the datas. RESULTS: Twenty-three general practitioners (GPs) were interviewed. Study participants recognized that the investigation and treatment of osteoporosis begins at a primary care level, typically with the GP. While some initiated screening by prescribing bone mineral density (BMD) assessments, only few prescribed the associated laboratory assessment and spinal X-rays in search of curable osteopathy or vertebral fracture. For those GPs who do take the opportunity to initiate treatments for patients, there is an understanding that first line options often include calcium and vitamin D, at a “preventive” level. The interviewed physicians interacted mainly with gynecologists and rheumatologists. Fracture liaison services were widely acclaimed. Several barriers were identified in their care management. The absence of a defined role between specialists and the lack of communication between the latter were an additional highlighted barrier. CONCLUSION: This study sheds further light on the discrepancy between the means available to treat osteoporosis, and the modest impact of the care observed.

Cellular senescence is the irreversible growth arrest subsequent to oncogenic mutations, DNA damage or metabolic insult. Senescence is associated with aging and chronic age associated diseases such as cardiovascular disease and diabetes. The involvement of cellular senescence in Acute Kidney Injury (AKI) and Chronic Kidney Disease (CKD) is not fully understood however, recent studies suggest that such patients have a higher-than-normal level of cellular senescence and accelerated aging. This study aimed to discover key biomarkers of senescence in AKI and CKD patients compared to other chronic ageing diseases as controls. We show that senescence proteins CKAP4 and PTX3 are upregulated in AKI and CKD patients compared with controls with chronic diseases suggesting they may play in a role in overall kidney disease development. Additionally, CKAP4 was found to be differentially expressed in both AKI and CKD when compared to unhealthy controls hence this biomarker could be prognostic senescence biomarker of both AKI and CKD.

In this paper, we report a comprehensive and consistent annotation of the locus encoding the horse T cell receptor b-chain (TRB), as inferred from the most recent genome assembly. The horse TRB locus spans approximately 1 Mb, making it the largest locus among the mammalian species stud-ied to date, with a significantly higher number of genes related to extensive duplicative events. In the region, 136 TRBV, belonging to 29 subgroups, 2 TRBD, 13 TRBJ and 2 TRBC genes, were iden-tified. The general genomic organization resembles that of other mammals, with a V-cluster of 135 TRBV genes, located upstream of two in-tandem aligned TRBD-J-C clusters, and an inverted TRBV gene at the 3’ end of the last TRBC gene. However, the horse b-chain repertoire would be affected by a high number of non-functional TRBV genes. Thus, we queried a transcriptomic da-taset derived from splenic tissue of a healthy adult horse, using each TRBJ gene as a probe to ana-lyse clonotypes encompassing the V(D)J junction. This analysis provided insights into the usage of the TRBV, TRBD and TRBJ genes and the variability of the juxtaposition region. Our results clearly demonstrated that the horse β-chain constitutes a complex level of variability broadly like that described in other mammalian species.

Biochar has a carbon-based porous structure that is advantageous for adsorbing air pollutants. The pore structure of biochar ranges from several tens to hundreds of m²/g depending on the production temperature. We compared the pore characteristics of biochar with its NOx and SOx adsorption performances to evaluate its adsorbing potential. Biochar was produced from cypress biomass via slow pyrolysis in a fixed-bed reactor and CO2 partial gasification. Slow pyrolysis experiments at 500–700°C were conducted to produce biochar, followed by yield, proximate, elemental, and surface area analyses. CO2 partial gasification activated the biochar produced by slow pyrolysis at the same temperature, and similar analyses were performed. NO and SO2 adsorption experiments were conducted separately and together for biochar produced under each condition. Biochar produced at 600°C showed the highest specific surface area. CO2 partial gasification increased the surface area at each temperature, reaching 680.3 m²/g at 700°C. In single adsorption experiments, N2 carbonized biochar showed NO and SO2 adsorption efficiencies of 84–90% and 88.2–91.4%, respectively, with similar trends in simultaneous adsorption experiments. CO2 activated biochar exhibited higher adsorption efficiencies due to its increased surface area, with NO and SO2 adsorption at 89.8–93.9% and 92–98.9%, respectively. Biochar activated at 700°C simultaneously adsorbed approximately 99% NO and SO2. The NO adsorption efficiency increased with increasing surface area of the small pores, whereas the SO2 adsorption efficiency improved with the development of both small and large pores.

Underreporting is the main limitation of the spontaneous reporting systems. This study aims to reduce underreporting enhancing public participation in vaccinovigilance through an SMS-based reporting system integrated with electronic immunization registries (IRs). Using the VigiVax software, parents of vaccinated children aged 2 years or younger received a single SMS inquiry about adverse events following immunization (AEFI). Responses were collected, validated by health operators and integrated with the information on IRs. AEFI reports were automatically submitted to the Italian Pharmacovigilance system. Among 254,160 SMS messages sent, corre-sponding to 451,656 administered doses (AD), 71,643 responses were collected (28.2% response rate), 21,231of them (8.3%) reporting an AEFI. After seriousness assessment based on clinical criteria, 50 reports (0,24%) were classified as serious. Among these, causality assessment identi-fied 31 reports at least potentially related to the vaccination (RR: 6.86/100,000 AD). Febrile seizures following MMRV vaccination accounted for 11 of these 31 cases, with an incidence of 32 per 100,000 AD. No fatal outcomes were reported. Our findings support the highly favorable risk profile of pediatric vaccinations and the possibility to improve spontaneous reporting through the integration of digital technologies

Extended Reality (XR) technologies—encompassing Virtual Reality (VR), Augmented Reality (AR), and Mixed Reality (MR)—merge elements of the physical world with virtual environments, revolutionizing various sectors, including healthcare. This paper explores the transformative potential of XR when combined with advanced digital tools to enhance therapeutic practices for individuals with disabilities or social isolation. Emphasizing the pivotal role of healthcare professionals, particularly nurses, the study investigates how these experts can effectively integrate XR technologies to maximize therapeutic benefits. The research includes a pre-implementation phase that assesses the knowledge and acceptance levels of both healthcare professionals and the general population. This foundational study highlights the potential of XR in expanding access to artistic and recreational activities, drawing insights from efforts by the Opera di Santa Maria del Fiore (Florence) to democratize timeless artistic experiences. The findings underscore the im-portance of defining key terms and understanding stakeholder readiness before full-scale implementation.

A superparamagnetic graphene oxide based drug carrier Fe3O4@SiO2/N–rGO was prepared through surface modification, material doping, and composite methods. This carrier has a large number of active sites, suitable for loading anticancer drugs, It can increase the drug load. Currently, the widely used drug in clinical use is epirubicin hydrochloride (EPI). The graphene based complex has a pH sensitive property and exhibits a pH sensitive property at pH=4.3. The release efficiency (RE) is 77.4%, making it suitable for drug release in cancerous acidic liquids. The physicochemical properties of drug carriers were studied using X–ray diffraction, Raman spectroscopy, and Fourier transform infrared spectroscopy. Electrochemical signals confirm that the anticancer drug EPI acts on the graphene plane through hydrogen bond interactions and π – π stacking.

unnel fires are generally detected using various sensors, including measuring temperature, CO concentration, and smoke concentration. To address the ambiguity and inconsistency in multi-sensor data, this paper proposes a tunnel fire detection method based on an improved Dempster-Shafer (DS) evidence theory for multi-sensor data fusion. To solve the problem of evidence conflict in DS theory, a two-level multi-sensor data fusion framework is adopted. The first level of fusion involves feature fusion of the same type of sensor data, removing ambiguous data to obtain characteristic data, and calculating the basic probability assignment (BPA) function through the feature interval. The second level fusion derives basic probability numbers from the BPA, calculates the degree of evidence conflict, normalizes to obtain the relative conflict degree, and optimizes the BPA using the trust coefficient. The classical DS evidence theory is then used to integrate and obtain the probability of tunnel fire occurrence. Different heat release rates, tunnel wind speeds, and fire locations are set, forming four fire scenarios. Sensor monitoring data under each simulation condition are extracted and fused using the improved DS evidence theory. The results show that the proposed improved DS evidence theory method detects the probability of fire occurrence in the four scenarios as 67.5%, 71.0%, 82.8%, and 83.5%, respectively, and identifies fire occurrence in approximately 2.4 seconds, an improvement of 64.7% to 70% over traditional methods. This demonstrates the feasibility and superiority of the proposed method, highlighting its significant importance in ensuring personnel safety.

Detecting IgE sensitizations in the serum of allergic dogs is commonly done using allergen extracts, but these are difficult to standardize. This article details the development and validation of the Pet Allergy Xplorer (PAX; Nextmune, Stockholm, Sweden), the first multiplex macroarray for the detection of IgE sensitization in dogs using allergen extracts and molecular components; the PAX is derived from the Allergy Xplorer (ALEX2; MacroArray Diagnostics, Vienna, Austria). The selection of allergens, cartridge processing, strategy for identifying and blocking IgE directed against cross-reactive carbohydrate determinants (CCD), and the method used for determining the positivity threshold are described. The validation of the PAX included evaluations of the specificity of its anti-IgE monoclonal antibody, specificity of IgE binding to target allergens, assay precision, and internal consistency. Additionally, the influence of possible confounding factors, such as sample type, the influence of hemolysis, lipemia, bilirubinemia, and elevated CCD-IgE, was tested. Finally, the sensitization rates of 23,858 European dogs to 145 environmental and Hymenoptera venom allergens were summarized. The PAX is accurate and reproducible and has a unique CCD-detection and blocking strategy; its molecular allergens offer a unique window on allergen cross-reactivity.

This research aimed at examining how social enterprises mitigate climate change in Ghana, examining their strategies, impacts on the environment that affect climate change, and barriers. The research adopted a cross-sectional survey design, descriptive and involved 185 social enterprises. Questionnaires were administered online and data was analyzed using descriptive statistics and regression analysis. The findings revealed that the most used strategies include the development of new funding structures and advocacy for sustainable farming. It also highlights numerous environmental concerns such as the judicious use of hazardous materials and pollution. Nevertheless, results from regression analysis showed that the relationship between the number of social entrepreneurship activities and the impact on the environment is relatively low and the role of other factors may be more significant. Some of the main barriers that were found include competition from large organizations, cultural perspectives towards climate change, policy instability and lack of adequate technical education. Accordingly, the recommendations proposed are developing specialized funding programs for climate-focused social enterprises; climate change education and awareness campaigns; and capacity building to upgrade technical competencies in clean technologies and climate resilience design.

The Mixture of Experts (MoE) architecture has evolved as a powerful and versatile approach for improving the performance and efficiency of deep learning models. This survey aims to provide the fundamental principles of MoE in details, a paradigm that harnesses the collective power of multiple specialized "expert" models working in concert to tackle complex tasks.Our exploration is a thorough analysis of the core components that constitute the MoE framework. We begin by dissecting the routing mechanism, a crucial element responsible for dynamically assigning input data to the most appropriate expert models. This routing process is pivotal in ensuring that each expert's specialized knowledge is optimally utilized. The survey places significant emphasis on expert specialization, a key feature that sets MoE apart from traditional architectures. We examine various strategies for developing and training specialized experts, exploring how this specialization enables MoE models to effectively handle diverse and multifaceted problems.Load balancing, another critical aspect of MoE systems, receives thorough attention. We discuss techniques for efficiently distributing computational resources among experts, ensuring optimal model performance while managing hardware constraints. This section provides insights into the delicate balance between model capacity and computational efficiency. Furthermore, we provide an in-depth discussion of the expert models themselves, examining their architectural designs, training methodologies, and how they interact within the larger MoE framework. This includes an analysis of different types of experts, from simple neural networks to more complex, task-specific architectures. The survey also navigates through diverse research avenues within the MoE landscape, highlighting recent advancements and innovative applications across various domains of machine learning. We pay particular attention to the burgeoning use of MoE in two rapidly evolving fields: computer vision and large language model (LLM) scaling. By providing this comprehensive overview, our survey aims to offer researchers and practitioners a deep understanding of MoE's capabilities, current applications, and potential future directions in the ever-evolving landscape of deep learning.The Mixture of Experts (MoE) architecture has evolved as a powerful and versatile approach for improving the performance and efficiency of deep learning models. This survey aims to provide the fundamental principles of MoE in details, a paradigm that harnesses the collective power of multiple specialized "expert" models working in concert to tackle complex tasks.Our exploration is a thorough analysis of the core components that constitute the MoE framework. We begin by dissecting the routing mechanism, a crucial element responsible for dynamically assigning input data to the most appropriate expert models. This routing process is pivotal in ensuring that each expert's specialized knowledge is optimally utilized. The survey places significant emphasis on expert specialization, a key feature that sets MoE apart from traditional architectures. We examine various strategies for developing and training specialized experts, exploring how this specialization enables MoE models to effectively handle diverse and multifaceted problems.Load balancing, another critical aspect of MoE systems, receives thorough attention. We discuss techniques for efficiently distributing computational resources among experts, ensuring optimal model performance while managing hardware constraints. This section provides insights into the delicate balance between model capacity and computational efficiency. Furthermore, we provide an in-depth discussion of the expert models themselves, examining their architectural designs, training methodologies, and how they interact within the larger MoE framework. This includes an analysis of different types of experts, from simple neural networks to more complex, task-specific architectures. The survey also navigates through diverse research avenues within the MoE landscape, highlighting recent advancements and innovative applications across various domains of machine learning. We pay particular attention to the burgeoning use of MoE in two rapidly evolving fields: computer vision and large language model (LLM) scaling. By providing this comprehensive overview, our survey aims to offer researchers and practitioners a deep understanding of MoE's capabilities, current applications, and potential future directions in the ever-evolving landscape of deep learning.

Senolytic and senomorphic therapies gain more and more attention in the last decade. This kind of therapy is based on the killing of cellular senescent cells without harming the “normal” cells. Ageing is not a disease. Clinical studies on healthy people will be difficult to conduct. Therefore, one possibility is to draw on the large repertoire of medicinal plants and use their sneolytic properties to provide mild, anti-ageing therapies. Chamomile, goldenrod, reishi and green tea were tested for their ability to trigger senolysis quercetin was used as control substance. Cellular senescence was induced with 25µM etoposide in human dermal fibroblasts and established for at least 14 days. The plant extracts were tested for their antioxidant potential (DPPH assay) and their polyphenol content. Senolysis was determined by presto blue assay of young and etoposide-induced senescent cells, and ß-Gal assays were also performed. The senomporphic properties of the plants were investigated using IL-6 ELISA and qPCR. It turned out that chamomile triggers a kind of cytokine storm and causes the cytokine values in the Elisa and in the qPCR to rise extremely, and other senescence-associated phenotype (SASP) markers were also elevated. Goldenrod and quercetin tend to have a senolytic and senomorphic effect respectively. Regarding the senolytic and senomorphic properties of herbs, we have found that all tested herbs can have a senolytic effect, and a senomorphic effect of quercetin has also been uncovered. With regard to the effect of chamomile, however, we can say that seemingly harmless tea products may have harmful effects, especially in combination with chemotherapy, at least in cell culture experiments.

This paper presents and demonstrates the development of a new lightweight coating for aluminium alloy using a novel multicomponent alloy based on the AlSiMgCu system. This coating was applied using a newly designed approach that combined High-Velocity Oxy-Fuel (HVOF) and Plasma Spraying processes. This hybrid technique enables the deposition of coatings with enhanced performance characteristics. The microstructure was studied using optical microscopy (OM) and scanning electron with energy dispersive X-ray spectroscopy (SEM+EDS) microscopy, revealing good adhesion and compaction between the multicomponent coating and the A6061 substrate with 50 to 150 µm thickness. Vickers indentations were performed on the substrate and the new coating material, revealing a 50% improvement in the material's hardness compared to the casted alloy. Additionally, electrical conductivity measurements showed approximative x3.3 times values compared to the alloy in as-cast condition due to high solidification rates altering the morphology of the phases. Corrosion tests demonstrated a lower corrosion rate compared to other multicomponent aluminium alloys and similar to thermal treated A6061 alloy. Finally, tribological results obtained using ball on disc (BOD) test and laser scanning confocal microscopy, confirmed that the new multicomponent coating exhibited reductions in both friction coefficient and wear rate by more than 20% and 50%, respectively. This study demonstrates that using multi-component aluminium coatings could lead to developing of new automotive parts with enhanced properties for corrosion resistance, electrical conductivity, and wear conditions. Optimizing the thermal spraying parameters could further enhance the coating, achieving greater and more homogeneous thicknesses and yielding even higher performance properties.

Big data is considered to be the solution to many complex problems, but its application appears to be relegated to the problems that are factorable (e.g., the tensor-like operations which reflect separable elements), not the non-factorable data from teamwork, team intelligence, and possibly not individual consciousness. In contrast, the quantum likeness of interdependence is set apart from the standard science of teams by recognizing a measurement problem between a team and its individual teammates, and between individual beliefs and actions. Teams that concern us are based on artificial intelligence (AI) and machine learning (ML) systems, which we find lacking for two reasons. First, neither AI nor ML models the human's timeless need for debate to solve a problem at the social level when facing uncertainty or complexity, where the debate of proposed actions serves to establish the boundaries of a problem in reality, no matter how complex nor uncertain. Second, at the individual level exists the illusion of a unified reality propagated by a bifurcated brain that we assume is split to determine a context with narrative and bounded spaces. We hypothesize that the quantum-likeness of interdependence applied to autonomous human-machine teams suggests that at the social level, debate models an individual's bifurcated brain, providing advantages for human-machine teams in freer systems over those oppressed by command and control systems (e.g., authoritarian regimes). Human-machine teams are coming, but they are not yet available, forcing us to rely on data from human systems. We close with plans for future research.

Muon tomography leverages cosmic muons’ exceptional penetration capabilities to reconstruct detailed tomographic images via multiple Coulomb scattering interactions, making it invaluable for detecting High-Z materials critical to homeland security. This study introduces the Slope Intercept (SI) algorithm, a novel approach for rapid and precise tomographic image reconstruction. Implemented using Geant4 simulations in a standard-sized container tomography station, SI demonstrates superior performance in speed and simplicity compared to traditional methods. While the imaging results of SI and the Point of Closest Approach (POCA) algorithm are nearly identical, the SI algorithm is simpler to implement, requires shorter CPU time, and exhibits a smaller margin of error. Its computational efficiency and simplicity make it a robust alternative to the POCA algorithm. These findings highlight SI’s suitability for applications demanding robust imaging and efficient data processing, which are crucial for advancing security measures and scientific research.

Evapotranspiration is a critical component of the hydrological cycle, and it has a decisive impact on the ecosystem balance in arid and semi-arid regions. The Yinchuan Plain, located in the Gobi of Northwest China, has a strong surface ET. In order to assess the ET pattern in this region, we obtained the ETa of Yinchuan Plain between 1987 and 2020 using the GEE platform. We employed the Surface Energy Balance Model (SEBAL), specifically geeSEBAL, to analyze the change pattern of ET over different seasons, years, and land types. The results show that: ① In spring, the daily ETa of the Yinchuan Plain is highest in the central lake wetland area, with a maximum value of 4.32 mm day-1. In summer, it is concentrated around the croplands and water bodies, with a maximum value of 6.90 mm day-1; In Autumn and winter, it is mainly concentrated around the water bodies and impervious areas, with maximum values of 3.93 and 1.56 mm day-1, respectively. ② From 1987 to 2020, the ET of the Yinchuan Plain showed an obvious upward and downward trend in some areas with significant land use changes, but the overall ET of the region remained relatively stable without dramatic fluctuations. ③ The evapotranspiration of different underlying land use types in the Yinchuan Plain region is as follows: water body&gt;cultivated land&gt;impervious&gt;grassland&gt;bare land. Our results showed that geeSEBAL is highly applicable in the Yinchuan Plain area. It allows for the accurate and detailed inversion of ET in the study area, which facilitates the study of regional hydrological cycle and water governance.

Cancer cells display elevated reactive oxygen species (ROS) and altered redox status, Here based on these characteristics, we develop a multi-drug delivery platform AMB@PDAP-Fe (APPF), from magnetotactic bacterium AMB-1 and realize MRI-visualized tumor microenvironment-responsive photothermal-chemodynamic therapy. The Fe3+ in PDAP-Fe is reduced by the GSH at tumor site and is released in the form of highly active Fe2+, which catalyzes the generation of ROS through Fenton reaction and inhibits tumor growth. At the same time, the significant absorption of the mineralized magnetosomes in AMB-1 cells in the NIR region enable them to efficiently convert near-infrared light into heat energy for photothermal therapy (PTT), to which PDAP also contributes. The heat generated in the PTT process accelerates the process of Fe2+ release, thereby achieving an enhanced Fenton reaction in tumor microenvironment. In addition, the magnetosomes in AMB-1 are used as MRI contrast agent, and the curing process is visualized. This tumor microenvironment-responsive MTB-based multi-drug delivery platform displays a potency to combat tumor and demonstrates the utility and practicality of understanding the cooperative molecular mechanism when designing multi-drug combination therapies.

Background: Sarcopenia is a progressive muscle disorder characterized by muscle wasting, decreased strength, and a substantially elevated risk of developing severe and potentially life-threatening health complications. For decades, muscle wasting has been recognized as a clinical symptom in various severe diseases and conditions. However, with increasing life expectancy and an aging population, sarcopenia has emerged as a prominent age-related condition in primary care, significantly contributing to disability and mortality rates. Aim and Objective: Our goal was to elucidate the clinical characteristics associated with sarcopenia prevalence in postmenopausal women with type 1 osteoporosis. Methodology: 370 postmenopausal osteoporosis patients who routinely visited the physiotherapy department at Ali Fatima Hospital were examined in this cross-sectional investigation. Mean age 64.59 ± 5.85 years, it was discovered that the patients' quality of life, postural stability, muscular strength, and balance were related to the existence of sarcopenia. Conclusion: In summary, among postmenopausal female patients with type 1 osteoporosis, the incidence of sarcopenia was relatively high (90.35%), affecting quality of life in 39.82% of patients, postural instability in 92.21% of patients, and balance in 39.92% of patients.

Background: Filamentous fungi are an emergent cause of severe infections in immunocompromised patients. Timely and accurate identification is crucial to initiate appropriate therapy. Traditional identification methods are time-consuming, labor-intensive, and operator-dependent. Ma-trix-assisted laser desorption/ionization-time-of-flight (MALDI-TOF) mass spectrometry is a rapid and easy-to-perform identification method. This study evaluates the effectiveness of a commercial MALDI-TOF MS platform to identify filamentous fungi in a routine laboratory. Material and Methods: We included 67 fungal isolates from 35 species/species complexes within 15 genera, confirmed in mycology reference laboratories. 33 were from clinical samples and 34 from strain collections. The study used the VITEK MS system (v3.2.0 database), after sample extraction by VITEK MS Mould Kit. Results were classified into categories: ‘correct species’, ‘correct species complex’, ‘correct genus’, ‘incorrect identification’, and ‘no identification’. We also evaluated the practicality of the kit. Results: VITEK MS correctly identified 91.0% of isolates (58.2% to species, 29.9% to species complex, and 1.5% to genus level). In 82%, the result matched the species/species complex identified by reference methods. No misidentifications were observed. The kit was rapid and easy to use. Conclusion: The VITEK MS system showed a high capability to accurately identify filamentous fungi in a routine laboratory.

Background: Transcatheter aortic valve replacement (TAVR) is a proven treatment for severe aortic stenosis (AS). Transfemoral access is the most prevalent method, achieved either surgically or percutaneously. This study compares in-hospital outcomes and length of stay between surgical cut-down and fully percutaneous approaches. Methods: This retrospective, propensity-matched study analyzed medical records of all patients who underwent transfemoral TAVR at our center from January 2019 to December 2023. Outcomes were assessed based on Valve Academic Research Consortium-2 (VARC-2) consensus criteria. Results: 251 TAVR patients (77 propensity score matching pairs) were included (55% female) with a median (IQR) age of 80 (11) years. Surgical cut-down showed fewer vascular complications, bleeding, and transfusions. No death, stroke, atrial fibrillation (AF), or need for pacemaker was reported in this group. Fewer mean hospitali-zation days were observed in the total cohort over the years (p< 0.001). This reduction was more pronounced after 2021 when the surgical approach was adopted. Mean hospitalization days were 6.40 ±6.46 for percutaneous and 4.34 ±1.61 for surgical groups (p< 0.001). Conclusions: Surgical cut-down for TAVR femoral access yields superior outcomes and shorter hospital stays compared to fully percutaneous methods.

Ewing sarcoma (ES) is an aggressive bone and soft-tissue pediatric cancer. High vitronectin (VN) expression has been associated with poor prognosis in other cancers, and we aimed to determine the utility of this extracellular matrix glycoprotein as a biomarker of aggressiveness in ES. Silk-fibroin plus gelatin-tyramine hydrogels (HGs) were fabricated with and without cross-linked VN and cultivated with A673 and PDX73 ES cell lines for two and three weeks. VN secretion to culture media was assessed using ELISA. Morphometric analysis was applied for phenotypic characterization. VN release to culture media was higher in 3D-models than in monolayer cultures, and intracellular, intercellular and pericluster presence was also observed. A673-HGs showed lower density of clusters but a proportion of larger clusters than PDX73-HGs, which presented low cluster circularity. The cluster density of A673-HGs without added VN was higher than with added VN, and slightly lower in the case of PDX73-HGs. Furthermore, a culture time of three weeks provided no benefits in cluster growth compared to two weeks, especially in A673 -HGs. These advances in 3D modeling and digital quantification pave the way for future studies in ES and other cancers to deepen understanding about intra- and intercellular heterogeneity and anti-adhesion VN therapies.

This article presents a rigorous approach to the Collatz Conjecture, focusing on fundamental properties of Collatz sequences. We establish key properties of the Collatz function and its inverse, including surjectivity and injectivity. The structure of Collatz sequences is analyzed in depth, proving important results such as the Bounded Subsequence Property and the uniqueness of cycles. Central theorems on the properties of Collatz sequences, including the boundedness of all sequences and the nature of the unique cycle, are presented and proved. These results culminate in a complete resolution of the Collatz Conjecture, demonstrating that all Collatz sequences eventually reach the cycle {1, 4, 2}. We provide a rigorous proof of the conjecture, while emphasizing the need for thorough peer review and verification by the mathematical community given the significance of this long-standing problem.

Large language models (LLMs) have shown impressive performance and versatility. However, their billions of parameters and high computational costs hinder the development of personalized and privacy-preserving AI assistants operating locally on user devices. In this work, we explored the potential of pruning LLMs to create lightweight models suitable for user devices, using the moderate-sized Llama-2 7B model as an example. By adopting a simple yet effective pruning method, we found that up to 60% of the weights in the Llama-2 7B model could be pruned without significantly impairing its language modeling capabilities. Furthermore, despite occasional factual inaccuracies, the pruned model at the sparsity limit generated fluent and helpful answers to daily queries, demonstrating its feasibility of on-device AI assistants. These inaccuracies might originate from forgetting or hallucination due to pruning. We proposed a simple protocol to distinguish between the two mechanisms, as well as future directions to improve the pruned models for local AI assistants.

Charge-dipole interactions are very common interactions among atoms and molecules, especially materials that can emit light or contain free charges. The second-order charge-dipole interactions, proportional to $\frac{1}{R^4}$, are stronger than the second-order dipole-dipole interactions or van der Waals interactions, proportional to $\frac{1}{R^6}$, at longer distances. In reality, there is more than one atom or charge; therefore, we focus on few-body charge-dipole interactions, such as charge-dipole-dipole interactions. Laser cooling and trapping allow us to study such interactions with much higher precision. In this article, charge-dipole interactions will be investigated in ultracold gases. To increase the interaction strength, we excite the ultracold atoms to highly excited states, Rydberg states. Here, we treat one Rydberg atom as a dipole, the excited electron and the ion core are the two poles of an electric dipole. Specifically, we study charge-atom interactions in ultracold Rydberg gases.

Hundreds of minerals are chiral, that is, they appear in nature in two forms – left-handed and right-handed. Yet except for quartz, that key structural property remained, by-and-large in the shadow of the world of minerals in research, in museum displays, and for collectors. This review is devoted for providing a full picture of chiral minerals in nature. It starts with a general outline of the crystallographic background needed for the characterization of chiral minerals, continues with a detailed description of the many chemical and physical processes leading to their formation, follows with their chemical reactivities and transformations, with their physical properties, and with the ways to analyze and identify them. Many tables with listings of the various types of chiral minerals, are provided. It is hoped that this review will spark interest in this aspect nature’s crystals.

Gigantism in theropods represents one of the most intriguing phenomena in dinosaur evolution, showcasing extreme adaptations in body size and ecological roles. This literature review focuses on Giganotosaurus carolinii, one of the largest known theropods to have ever existed, to explore its unique aspects of gigantism and the subsequent ecological impacts. By analyzing features such as its skeletal morphology, comparative anatomy, and paleoenvironmental data, we assess the evolutionary pressures and biological constraints that shaped the gigantism observed in Giganotosaurus. We discover that the species exhibited a combination of physiological and ecological adaptations that allowed it to thrive as an apex predator in its Cretaceous environment. We will also further examine the implications of its size on prey dynamics, competition with other large theropods, and the overall ecosystem structure. Through a thorough, multidisciplinary approach, this research enhances our understanding of how gigantism influenced theropod behavior, interspecies interactions, and the broader paleoecological landscape.

This study utilized electrical resistivity imaging (ERI) to investigate subsurface characteristics near Nicolaus Copernicus University Polar Station on the western Spitsbergen-Kaffiøyra Plain, island in the Svalbard archipelago. Surveys along two lines, LN (148 meters) collected in 2022 and 2023 and ST (40 meters) collected in 2023, were conducted to assess resistivity and its correlation with ground temperatures. The LN line revealed a 1 to 2 meters thick resistive unsaturated outwash sediment layer, potentially indicative of permafrost. Comparing LN resistivity result between 2022 and 2023, a 600 Ohm-m decrease in the unsaturated active layer in 2023 was observed, attributed to a 5.8℃ temperature increase, suggesting a link to global warming. ERI along the ST line depicted resistivity reaching its minimum at approximately 1.6 meters, rising to over 200 Ohm-m at 4 meters, and slightly decreasing to around 150 Ohm-m at 7 meters. Temperature measurements from the ST line's monitoring well confirmed permafrost at a depth of 1.6 to 2 meters. Additionally, water content distribution in the ST line was estimated after temperature correction, revealing a groundwater table depth of approximately 1.06 meters, consistent with measurements from the S4 borehole on the ST line. This study provides valuable insights into Arctic subsurface dynamics, emphasizing the sensitivity of resistivity patterns to climate change and offering a comprehensive understanding of permafrost behavior in the region.

This investigation is part of a topical situation where wireless equipment is gradually being used for energy transfer, particularly for autonomous systems and the use of decarbonized en-ergies. A characteristic example of decarbonized autonomous use is linked to the substitution of thermal engine vehicles by electric vehicles (EVs) equipped with energy storage batteries. This response was considered in an ecological context of reducing air pollution and defending plane-tary biodiversity, which are currently vital. These EVs ultimately operate thanks to the wireless charging of their batteries when stationary or running. By changing long-established means of transport that have become a threat to biodiversity, it is necessary to ensure that innovative re-placement solutions protect this biodiversity. In addition, the construction of wireless power transfer (WPT) battery chargers for these EVs must offer an optimal ecology of clean energy saving. In such a context, the two concepts of One Health (OH) and Responsible Attitude (RA) will find their place in the design and control of WPT tools in EVs. This contribution aims to il-lustrate and analyze the roles of the green and non-wasteful OH and RA approaches in the de-sign and control of WPT embedded in EVs for the smart city (SC) environment. In the paper, WPT tools are first introduced. The design and control of EV battery charging tools are then examined. The biological effects on living tissues due to the electromagnetic field (EMF) radia-tion of WPT are analyzed. The phenomena and equations governing the design of WPT and the effects of EMF radiation are then exposed. The OH and RA approaches in the SC context are af-terward analyzed. The protection against the unsafe effects of WPT tools in the SC environment is consequently explored. The analyses followed in the paper are supported by examples of lit-erature.

Road conditions, often degraded by insufficient maintenance or adverse weather, significantly contribute to accidents, exacerbated by the limited human reaction time to sudden hazards like potholes. Early detection of distant potholes is crucial for timely corrective actions, such as reducing speed or avoiding obstacles, to mitigate vehicle damage and accidents. This paper introduces a novel approach that utilizes perspective transformation to enhance pothole detection at different distances, focusing particularly on distant potholes. Perspective transformation improves the visibility and clarity of potholes by virtually bringing them closer and enlarging their features, which is particularly beneficial given the fixed-size input requirement of object detection networks, typically smaller than the raw image resolutions captured by cameras. Our method automatically identifies the region of interest (ROI)—the road area—and calculates the corner points to generate a perspective transformation matrix. This matrix is applied to all images and corresponding bounding box labels, enhancing the representation of potholes in the dataset. This approach significantly boosts detection performance when used with YOLOv5-small, achieving a 45.7\% improvement in average precision (AP) at IoU thresholds of 0.5 to 0.95 for a single class, and notable improvements of 30.3\%, 78.6\%, and 278\% for near, medium, and far pothole classes, respectively, after categorizing them based on their distance. This work is the first to employ perspective transformation specifically for enhancing the detection of distant potholes.

Accurate measurement of pedaling kinetics and kinematics is vital for optimizing rehabilitation, exercise training, and understanding musculoskeletal biomechanics. Pedal reaction force, the main external force in cycling, is essential for musculoskeletal modeling and closely correlates with lower limb muscle activity and joint reaction forces. However, sensor instrumentation like 3-axis pedal force sensors is costly and requires extensive post-processing. Recent advancements in machine learning (ML), particularly neural network (NN) models, provide promising solutions for kinetic analyses. In this study, an NN model was developed to predict radial and mediolateral forces, providing a low-cost solution to study pedaling biomechanics with stationary cycling ergometers. Fifteen healthy individuals performed a 2-minute pedaling task at two different self-selected (58±5 rpm) and higher (72±7 rpm) cadences. Pedal forces were recorded using a 3-axis force system. The dataset included pedal force, crank angle, cadence, power, and participants' weight and height. The NN model achieved an inter-subject normalized root mean square error (nRMSE) of 0.15±0.02 and 0.26±0.05 for radial and mediolateral forces at high cadence, respectively, and 0.20±0.04 and 0.22±0.04 at self-selected cadence. The NN model's low computational time suits real-time pedal force predictions, matching the accuracy of previous ML algorithms for estimating ground reaction forces in gait.

Time-of-Flight (ToF) cameras are subject to high levels of noise and errors due to Multi-Path-Interference (MPI). To correct these errors, algorithms and neuronal networks require training data. However, the limited availability of real data has led to the use of physically simulated data, which often involves simplifications and computational constraints. The simulation of such sensors is an essential building block for hardware design and application development. Therefore, the simulation data must capture the major sensor characteristics. This work presents a learning-based approach that leverages high-quality laser scan data to generate realistic ToF camera data. The proposed method employs MCW-Net (Multi-Level Connection and Wide Regional Non-Local Block Network) for domain transfer, transforming laser scan data into the ToF camera domain. Different training variations are explored using a real-world dataset. Additionally, a noise model is introduced to compensate for the lack of noise in the initial step. The effectiveness of the method is evaluated on reference scenes to quantitatively compare to physically simulated data.

Statistics modules are included in most university degrees, independent of the degree area. They have an important role in preparing students for the real world. The overall goal of this paper is to identify the common statistical issues students face during the transition from secondary education to tertiary education. Drawing upon data from the University College Dublin (UCD) Math Support Center (MSC) and Universidad Rey Juan Carlos (URJC), our approach aims to optimize learning experiences while advancing sustainability objectives. In this paper, we conducted a categorization of statistical concepts taught in university (based on URJC). Using this categorization, UCD MSC tutor comments were categorized and validated, and subsequently descriptive analyses and text mining were used on the UCD MSC comments to achieve a deeper understanding of the statistical issues. Building on this study, we plan to develop a suite of evidence-based sustainable educational applications and games to support undergraduate students internationally in first-and second-year statistical modules. Our findings on students’ main statistical issues contribute to the cultivation of lasting statistical literacy among students. This research advances the sustainability agenda within statistical education.

In this paper we suggest a first ever construction of fractional integral and differential operators based on signed measures including a vector-valued case. The study focuses on constructing the fractional power of the Riemann-Stieltjes integral with a signed measure, using semigroup theory. The main result is a theorem that provides the exact form of a semigroup for the Riemann-Stieltjes integral with a measure having a countable number of extrema. The article provides examples of semigroups based on integral operators with signed measures and discusses the fractional powers of differential operators with partial derivatives.

Titanium-based metal-matrix composites manufactured by additive manufacturing offer tremendous lightweighting opportunities. However, processing high reinforcement content remains challenging. This study reports an improved manufacturing process for Ti-TiC enabling high reinforcement content and significant fracture strain concurrently: mechanical blending, followed by laser powder bed fusion and a single heat treatment. As-built microstructure shows both un-melted TiC particles and sub-stoichiometric TiC dendrites resulting from a partial dissolution of TiC particles. The heat treatment is shown to fully convert TiC dendrites into equiaxed TiC grains. Reduction of the C/Ti ratio in TiC during the process results in an increase in the reinforcement content, from a nominal 12 vol% to an effective 21.5 vol%. Ti-TiC tensile samples reached fracture strains of up to 1.7%, Young’s moduli of up to 149 GPa and ultimate tensile strengths of up to 827 MPa. Lower TiC initial powder size distributions displayed the best mechanical performance.

Formal Calculation uses an auxiliary form to calculate various nested sums and provides results in three forms. It is also a powerful tool for analysis. This article studies the symmetry of the coefficients in Formal Calculation. Three types of extended numbers were introduced, and many formulas for symmetric functions were obtained.

The COVID-19 pandemic has revealed significant disparities in disease severity and mortality across various population groups and regions. These disparities cannot be attributed solely to healthcare systems, socioeconomic factors, living conditions, or individual immune landscapes; environmental factors also play a crucial role. This work explores how variations in nasal morphology related to age, gender, and race can affect the respiratory system's ability to filter, warm, and humidify inhaled air. These variations may contribute to differences in how cold, dry, polluted, and infected air impact the respiratory system, thus influencing the observed patterns of disparities in COVID-19 outcomes. The analysis suggests that individuals with genetically determined wider nasal cavities, often found in populations originating from warmer climates, have decreased filtration and air conditioning efficiency, leading to increased susceptibility to respiratory infections and disproportionately high mortality rates from COVID-19. Moreover, age-related changes in nasal morphology, such as increased nasal volume and involution atrophy of the mucosa, contribute to impaired air conditioning and filtration, thereby increasing the risk of severe outcomes in the elderly. Gender differences in nasal morphology, with men typically having larger nasal passages compared to women, are linked to poorer air conditioning and filtration, potentially contributing to the higher risk of severe COVID-19 in men. Preliminary statistical analyses of the U.S. population suggest that men with favorable nasal structures may have a longer life expectancy than those with less optimal nasal anatomy; however, this should be regarded as a hypothesis. The findings underscore significant gaps in our understanding and highlight the urgent need for further research to unravel the complex interplay between nasal morphology, respiratory system dynamics, and environmental factors in shaping disease susceptibility and outcomes.

Background: The loss of a co-worker always evokes complex emotions. Such a loss is particularly challenging for those who spend many hours at work and develop close interpersonal relationships with their colleagues. While many studies have examined how losing colleagues affects employees in various organizations, no research has specifically examined this topic in the school environment. Methods: This qualitative study explored the experiences of school counsellors facing the loss of colleagues from their school educational team. Twenty-one school counselors ranging in age from 28 to 61 who had lost a colleague within the past five years were examined by semi-structured in-depth interviews. The interviews were transcribed and analyzed using thematic content analysis. Results: Three main themes emerged from the data: (1) “From Shock to Action”: School Counsellors’ Reactions to Colleague Loss; (2) “From Friendship to Conflict”: School Counsellors' Diverse Experiences with Colleague Loss; and (3) “The Burden of Care”: Coping Mechanisms for School Counsellors Facing Colleague Loss. Conclusion: This study highlights the complex experiences of school counsellors in dealing with the death of colleagues. It underscores the importance of providing long-term emotional support for counsellors throughout their careers, particularly when coping with crises and emergencies.

This study aimed to evaluate the impact of different closures used in second fermentation on the aromatic fraction of sparkling wine. Six types of closures (cork stoppers and screw cap) and 94 months of aging in bottle were investigated. Head-space-solid phase microextraction (HS-SPME) and thermal desorption (TD) procedures coupled to gas chromatography-mass spectrometry (GCMSMS) analysis was applied. The vectors containing the relative abundance of the volatile compounds are compositional vectors. The statistical analysis of compositional data requires specific techniques that differ from standard techniques.101 volatile compounds were identified. HS-SPME extracted highest percentage of ester, ketones and other compounds while TD was a useful tool for the obtention of alcohol, acid, ether and alkanes compounds. Esters was the most abundant family of compounds. Compositional data analysis applied to study the impact of different closures used in bottle-aging after second fermentation on the volatile composition of sparkling wine concluded that there are differences in the relative abundance of certain volatile compounds between cork stoppers and screw cap closures group. Overall, the most abundant part in screw cap closures was Ethyl hexanoate and, Ethyl octanoate in cork stoppers. Also, the proportion amount of Dimethylamine was higher in screw cap closures than cork stoppers group relative to the entire of the sample.

The growing global population and limitations in fish catch production have led to a surge in the demand for aquaculture. Contaminants of emerging concern (CEC) are frequently being detected at low levels in surface water. These CECs, which include previously unidentified or unregulated pollutants, pose potential risks to health and the environment, though their impacts are not yet fully understood. Extensive research studies have been proposed and undertaken to address the issue of aquaculture wastewater, aiming to minimize its impact and implement effective treatment methods. This review provides an analysis of various technologies used for treating aquaculture wastewater using advanced oxidation processes (AOPs) focusing on photocatalysis and ozonation. It examines their advantages and disadvantages, as well as their respective treatment efficacies and discusses their potential applications in sustainable aquaculture practices complying with the Sustainable Development Goals of 1,2 and 6 and the Environmental Social and Governance (ESG) framework.

Aim of the study was to determine the influence of climatic and hydrological changes on the growth of Scotch pine (Pinus sylvestris L.) and Black alder (Alnus glutinosa (L.) Gaertn) in the Narew National Park over past 50 years. The researches were based on tree increment cores extracted from 42 pine trees and 57 alder trees ranging in age from 25 to 88 years and climatic (temperature and precipitation for Bialystok) and hydrological (water level of the Narew River) data. Standardized data (5-year index) were analysed by species, generation (Y - 21-40 years, M - 41-60, O - 61-90) and decade using correlation analysis. The results of the study show that pine responded more strongly to changes in air temperature and changes in precipitation totals, while alder growth was more strongly related to fluctuations in the water level of the Narew River. The most variable climatic and hydrological conditions and the most difficult conditions for tree growth prevailed in the first and last decades (1971-1980, 2011-2020). The decrease in the water level of the Narew River that occurred over the last 50 years did not adversely affect the condition of the trees. Analysis of DBH growth rates showed that the younger generations (Y, M) grow faster than the older generation (O). One of the reasons for the accelerated tree growth and increased resistance to the decline in the water level of the Narew River may be the increase in CO2 concentration in the atmosphere. Accelerated tree growth and increased resistance to drought may have certain consequences like increased damage from wind as a result of the decrease in wood density or decline in the sensitivity of trees to climate and hydrological changes. However, less sensitivity to changes in climatic conditions may only apply to older trees.

Tsallis entropy has been widely used in image thresholding because of its non-extensive properties. The non-extensive parameter q contained in this entropy plays an important role in various adaptive algorithms and has been successfully applied in bi-level image thresholding. In this paper, the relationships between parameter q and pixels’ long-range correlations have been further studied within multi-threshold image segmentation. It is found that the pixels’ correlations are remarkable and stable for images generated by a known physical principle, such as infrared images and medical CT images. And the corresponding non-extensive parameter q can be evaluated by using self-adaptive Tsallis entropy algorithm. The results of this algorithm are compared with those of Shannon entropy algorithm and the original Tsallis entropy algorithm, in terms of quantitative image quality evaluation metrics PSNR (Peak Signal-to-Noise Ratio) and SSIM (Structural Similarity). Furthermore, we observed that for image series with the same background, the q values determined by the adaptive algorithm are consistently kept in a narrow range. Therefore, similar or identical scenes during imaging would produce similar strength of long-range correlations, which provides potential applications for unsupervised image processing.