Objective: To develop a synthetic process route and method more suitable for industrialscale-up production of FXIa inhibitor BAY2433334 (asundexian). Method: BAY2433334 is obtained from (2R)-2-aminobutyric acid by esterification, diazotization, condensation reaction, deacetyl deprotection, activation reaction, and Mitsunobu reaction. Results: The target compound BAY2433334 was synthesized by the above method is simple to operate, and the raw materials are inexpensive and readily available. Simultaneously, the product quality is very high: Few O-alkylated impurities are generated during the reaction, with a high N-alkylated product/O-alkylated product ratio (above 35-45:1). Meanwhile, the ee value is greater than 99%, which means that there are very few isomers present. As a result，no chiral resolution is required, which greatly reduces the cost. Conclusion: A new process route suitable for the industrial production of BAY2433334 has been developed in this paper, which avoids the patent limitations of the originator company of BAY2433334 to the preparation of BAY2433334, improves the product quality of BAY2433334, and reduces the production cost of BAY2433334.

An MFI zeolite (Si/Al = 40) was desilicated by alkaline treatment in order to generate mesopores. Temperature, alkali concentration and treatment duration were adjusted to maximize mesoporosity while preserving the zeolite structure. Special attention was paid to the characterization of the strength and accessibility of the acid sites. The catalysts were tested in the isobutane/butene alkylation, a reaction typically catalyzed by zeolites but limited by coke deposition. Additionally, glycerol esterification with acetic acid was used as test reaction, due to the requirement of large pores to take part. The results confirmed that mesopores were successfully generated in the MFI zeolite, and the diffusion through the solid was enhanced, but the active sites remained mainly confined in the micropores.

H-bonding, including H-bond donor (HBD) with electron-rich part of a substrate and H-bond acceptor (HBA) with electron-deficient part of a substrate, has achieved massive success. Faster transformation often correlates with more donicity of HBD. Besides the positive charge are employed to enhance the donicity of HBD, the electron withdrawing groups become a dissimilar approach for increasing the donicity of HBD. We describe newly designed H-bond donor catalysts, tris(monoalkylamino)cyclopropenium, implemented by vicinal positive charged on the cyclopropenium core. The counter anion became potential HBA to activate the electron-deficient part of a substrate. The tris(phenylamino)cyclopropenium chloride (TPAC·Cl) as a representative catalyst was applied in Friedel–Crafts alkylation of indoles with nitroalkenes. X-ray analyses of a single crystal of TPAC·Cl described the 3D architecture and the delocalized cationic charge in the solid state. Unit formal positive charge turned N–H moieties into H-bond donor (HBD) and the counter chloride anion exhibited potential H-bond acceptor (HBA). The HBD and HBA displayed cooperative organocatalysis in Friedel–Crafts alkylation of indoles with nitroalkenes. A new class of hydrogen bonding catalysis and working mechanism were proposed.

The exploitation of the metallacarboranes’ potential in various fields of research and practical ap-plications requires the availability of convenient and versatile methods for their functionalization with various functional moieties and/or linkers of different types and lengths. Herein we report a study on cobalt bis(1,2-dicarbollide) functionalization at 8,8’-boron atoms with different het-ero-bifunctional moieties containing protected hydroxyl function allowing further modification after deprotection. Moreover, an approach to the synthesis of three and four functionalized metallacarboranes, at boron and carbon atoms simultaneously, via additional functionalization at carbon to obtain derivatives carrying three or four rationally oriented and distinct reactive surfaces, is described

The alkaloid tazopsine 1 was introduced in the late 2000's as a novel antiplasmodial hit compound active against Plasmodium falciparum hepatic stages, with potential to develop prophylactic drugs based on this novel chemical scaffold. However, the structural determinants of tazopsine 1 bioactivity, together with the exact definition of the pharmacophore, remained elusive, impeding further development. We found that the antitussive drug dextromethorphan (DXM) 3, although lacking the complex pattern of stereospecific functionalization of the natural hit, was harboring significant antiplasmodial activity in vitro despite suboptimal prophylactic activity in a murine model of malaria, which precluded its direct repurposing against malaria. The targeted N-alkylation of nor-DXM 15 delivered a small library of analogues with greatly improved activity over DXM 3 against P. falciparum asexual stages. Amongst these, N-2’-pyrrolylmethyl-nor-DXM 16i showed a 2- to 36-fold superior inhibitory potency compared to tazopsine 1 and DXM 3 against parasite liver and blood stages, with 760 ± 130 nM and 2.1 ± 0.4 µM IC50 values, respectively, as well as liver/blood phase selectivity of 2.8. Furthermore, cpd. 16i showed a 5 to 8-fold increase of activity relatively to DXM 3 against P. falciparum stages I-II and V gametocytes, with 18.5 µM and 13.2 µM IC50 values, respectively. Cpd. 16i can thus be considered a promising novel hit compound against malaria in the ent-morphinan series with putative pan-cycle activity, paving the way for further therapeutic development (e. g., investigation of its prophylactic activity in a mouse model of malaria).

The synthesis 2-tert-butyl-4-methylphenol is of great significance because of its widely application in industry, and the development of highly efficient catalyst is necessary to the alkylation of p-cresol and tert-butyl alcohol. Here, an efficient and mild method was established, caprolactam was chosen as hydrogen-bonding acceptor, p-toluenesulfonic acid was employed as hydrogen-bonding donor, and deep eutectic solvent (DES) was prepared to catalyze the alkylation reaction. The structure of the DES catalyst was characterized by 1H NMR spectra, thermogravimetric analysis and fourier transform infrared spectra (FT-IR). In addition, response surface design based on Box-Behnken method was employed to optimize the alkylation reaction process parameters, the study of reaction kinetics was also carried out subsequently. The recycle performance of the catalyst was evaluated by recovery experiments, and a good result was obtained. Comparing with the literature reported, we here provide a mild method to the synthesis of 2-tert-butyl-4-methylphenol.

Using the colloidal method, Au NP’s were deposited onto 6 different supports (TiO2,  and -Al2O3, HFeO2, CeO2, and C), and their catalytic activity and selectivity were compared in the alkylation of aniline by benzyl alcohol. Correlations were made between the nature of the support, the Au NP size and H-binding energy.

The use of spirocycles in drug discovery and medicinal chemistry has been booming in the last two decades. This has clearly translated in the landscape of approved drugs. Among two dozen clinically used medicines containing a spirocycle, 50% have been approved in the 21st century. The present review focuses on the notable synthetic routes to such drugs invented in industry and academia and is intended to serve as a useful reference source of synthetic as well as general drug information for researchers engaging in the design of new spirocyclic scaffolds for medicinal use or embarking upon analog syntheses inspired by the existing approved drugs.

A hydrothermal pretreatment of the microalga Nannochloropsis gaditana at mild temperatures has been studied in order to reduce N and O content in the biocrude obtained by hydrothermal liquefaction (HTL). The work is focused on the evaluation of temperature, reactor loading and time (factors) to maximize the yield of the pretreated biomass and the heteroatom contents transferred from the microalga biomass to the aqueous phase (responses). The study followed the factorial design and response surface methodology. An equation for every response has been obtained, which leads to the accurate calculation of the operating conditions required to obtain a given value of these responses. Temperature and time are critical factors with a negative effect on the pretreated biomass yield, but a positive one on the N and O recovery in the aqueous phase. The slurry concentration has to be low to increase heteroatom recovery and high to maximize the pretreated microalga yields

A four-step synthesis of bifunctional, noncovalent organocatalysts based on the chiral (1R,2R)-cyclohexane-1,2-diamine scaffold containing a 1,2-benzenediamine H-bond donor was developed. Nucleophilic aromatic substitution of the 2-fluoronitrobenzene derivative with the commercial (1R,2R)-cyclohexane-1,2-diamine was followed by selective alkylation of the primary amino group, reduction of the aromatic nitro group and final derivatization of the primary aromatic amino group, i.e. acylation, sulfonation, reductive alkylation and arylation, leading to the four subtypes of organocatalysts. All new compounds were fully characterized. The prepared organocatalysts (32 examples) were tested in the Michael addition of acetylacetone to trans-β-nitrostyrene, yielding the addition product with incomplete conversions (up to 93%) and enantioselectivities of up to 41% ee.

In the past few decades, N-heterocyclic carbenes (NHCs) open the new field of organocatalysis in synthetic organic chemistry. This review highlights the dramatic progress in the NHC-catalyzed C−O bond formation based on the activation of aldehyde C(sp2)−H bonds. The oxidative and redox transformations for the synthesis of various molecules with structural diversity and complexity are summarized. Furthermore, new methods and strategies for NHC catalysis are emerging continuously; thus, cooperative catalysis with Brønsted acid, hydrogen-bonding catalyst, transition-metal catalyst, and photocatalyst is also described.

Background Nitrous Oxide (N₂O) is a dissociative anaesthetic that is sometimes used recreationally. The prevalence of N₂O use is difficult to quantify but appears to be increasing. Research on N₂O harms and application of harm reduction strategies are limited. The aim of this mixed method systematic review was to collate and synthesise the disparate body of research on recreational nitrous oxide use to inform harm reduction approaches tailored for young people. Methods To identify publications reporting recreational use of N₂O, a search of public health, psychology and social science databases was conducted. Databases included PubMed, CIHNAL, PsycINFO, Scopus and Web of Science. Gray literature and Google advanced search were also used. Due to limited published literature on the recreational use of N₂O, no limit was placed on publication date or study type. A thematic synthesis extracted descriptive and analytical themes from the selected studies. Quality appraisal was conducted using the CASP Tool for Qualitative studies and the Joanna Briggs Institute case report assessment tool Results The search retrieved 407 reports. Thirty-four were included in the final analysis including sixteen case reports. The included studies were primarily concerned with raising awareness of the apparently increasing use and subsequently increasing harms of recreational N₂O use. There was limited reference to policy or legislative responses in any published studies, no suggestions for harm reduction strategies or application of service level responses. In general, individuals lack awareness of N2O related harms. Conclusion The review found three key areas that deserve further consideration including: 1) policy, 2) service delivery, and 3) harm associated with N₂O use. We recommend a top-down (policy) and bottom-up (services delivery/services users) approach to harm reduction for N₂O use which also includes further consultation and research with both groups. Future research could explore young people’s experience of N₂O use including benefits and problems to inform contextually relevant harm reduction strategies.

Tick-borne encephalitis virus is a pathogen endemic to northern Europe and Asia, transmitted through bites from infected ticks. It is a member of the Flaviviridae family, possesses a positive-sense, single-stranded RNA genome encoding a polypeptide that is processed into seven non-structural and three structural proteins, including the envelope (E) protein. The glycosylation of the E protein, a single N-linked glycan at position N154, plays a critical role in viral infectivity and pathogenesis. Here, we dissected the entire glycosylation profile of the E protein using liquid chromatography tandem mass spectrometry and identified three novel O-linked glycans which were found at relatively low frequency. One of the O-linked glycans was positioned close to the highly conserved N-linked glycan site and structural analysis indicated that it may be of relevance for viral maturation. The N154 site was found to be glycosylated with a high frequency, containing oligomannose or complex-type structures, some of which are fucosylated. An unusually high portion of oligomannose N-linked glycan structures exhibited compositions that are normally observed on proteins while they are translocated from the endoplasmic reticulum to the trans golgi network, suggesting disruption of the glycan processing pathway in the infected cells from which the E protein was obtained.

Microwave absorbers with lightweight, good stability and high efficiency have attracted much attention for their applications in many contemporary fields. In this work, the 3D porous (Ni@NO-C)n/NO-C composite absorber was prepared by a wet chemistry method with Ni chains and melamine as precursors, in which NO-C (N,O-doped carbon) encapsulated Ni particles are homogenously dispersed in the 3D porous networks of NO-C in the form of (Ni@NO-C)n chains. The special microstructure of the as-prepared material is proved to be benefit for the improvement of its microwave adsorption performance. The as-synthesized (Ni@NO-C)n/NO-C composite ab-sorber exhibited an effective absorption bandwidth of 4.1 GHz and an extremely large reflection loss of -72.3 dB. The excellent microwave absorbing performances can be ascribed to the coopera-tive consequence of dielectric loss and magnetic loss along with the balance between attenuation capability and impedance match.

The article presents comparative results from 5 categories of animals (4 samples originating from pigs, 2 from cows, 1 from chicken, 1 from ostriches, 1 from horses, samples quantified with A, B, C, D, E, F, G, H, I). These samples were collected from large, medium and small (family) farms. The results were validated by the biogas production generated by the respective samples, using the Automatic Methane Potential Test System (AMPTS II) bio-processor. The largest amounts of biogas (2,464.5 Nml, 2,262.0 Nml) were recorded for the samples from pig farms (Sample B and Sample D), whereas the lowest values were obtained in the case of Sample A (414.1 Nml) and Sample C (558.3 Nml). The heavy metals analyzed in the article are Zn, Cu, Fe, Mn, Ca, K, As. The results corroborate that the C/N ratio can also vary to values lower than 20-30, without affecting the biogas production process, and the heavy metal content must be known especially for the full management of the wastes. All final data presented in the article are based on repeated, triplicate experiments, with less as 2% deviation between data.

The chelating aluminum complex [2-(Me2NCH2)C2B10H10]AlX2 (X = Br 3, CH3 4) was synthesized using 2-dimethylaminomethyl-o-carboranyl lithium (2) with aluminum tribromide or dimethylaluminum bromide, resulting in a modest yield. Compound 4 was obtained by reacting compound 3 with CH3Li in toluene. All compounds were characterized by infrared (IR) spectroscopy, 1H, 11B, 13C nuclear magnetic resonance (NMR) spectroscopy, and X-ray crystallography. X-ray structural studies of CabNAlBr2 (3) and CabNAlMe2 (4) indicated that the Al atom was located at the center of a distorted tetrahedron. Crystal structures of the CabNAlBr2 (3) [a = 8.9360(3) Å, b = 12.0358(9) Å, c = 14.7730(4) Å, α = β = γ = 90°] and the CabNAlMe2 (4) [a = 8.9551(3) Å, b = 11.9126(9) Å, c = 14.7711(4) Å, α = β = γ = 90°] were obtained. The reactivity of aluminum complexes 3 and 4 with Lewis bases, such as H2O, pyridine, alkylamines, and arylamines, confirmed their rapid decomposition.

The KcsA is a prokaryotic potassium-oriented channel, which is sourced from the Streptomyces lividans soil bacteria. From extensive studies that have been carried over the KcsA potassium channel, it has been proved that various factors enable the gating and shuttling of the potassium ions into and out of the cells. Some of the factors include the different concentration of protons in the inside and outside membrane. The other factor is the existence of the selectivity filter equipped in the exit of channel pore, which enables the movement of the K⁺ ions. Not only are potassium ions present in the channel but also sodium ions. Potassium and sodium ions are the ions that are essential in the conductivity of a cell because of their charge. An intuitive idea about why K⁺ ions are at least 10,000 times more permeant than Na⁺ ions is presented in various entities. The hypothesis is that the selectivity ratio is probably related to the successive entry of Na⁺ ions, based on the premise that the ratio seems to be relevant to unpredictable quantities caused by Brownian corrosion of ions.

Emerging pollutants as pharmaceuticals have been focusing international attention for few decades. Ciprofloxacin (CIP) is a common drug widely found in effluents from hospitals, industrial and different wastewater treatment plants, as well as rivers. In this work, the lab-scale 3D-BER system was established, and more than 90% of the antibiotic CIP removal from the Low C/N wastewater. Best results were obtained with current intensity, and different C/N ratio significantly improve the removal of CIP and nitrates, when the ideal conditions were; C/N = 1.5-3.5, pH =7.0-7.5, and I = 60 mA. The highest removal efficiency of CIP = 94.20 %, NO3--N= 95.53 % and total nitrogen (TN) = 84.27 %, respectively. In this novel system, the autotrophic-heterotrophic denitrifying bacteria played vital role for the removal of CIP and enhanced denitrification process. Thus, autotrophic denitrifying bacteria uses CO2 and H2 as carbon sources to reduce nitrates to N2. This system has the assortment and prosperous community revealed at the current intensity of 60 mA, and the analysis of bacterial community structure in effluent samples fluctuates under different condition of C/N ratios. According to the results of LC-MS/MS analysis, the intermediate products were proposed after efficient biodegradation of CIP. Microbial community on biodegrading was mostly found at phylum, and class level was dominantly responsible for the NO3--N and biodegradation of CIP. This work can provide some new insights towards the biodegradation of CIP and the efficient removal of nitrates from low C/N wastewater treatment by the novel 3D-BER system.

The α-synucleinopathies are a group of neurodegenerative diseases characterized by the deposition of α-synuclein aggregates (α-syn) in the brain. Currently, there is no suitable tracer to enable a definitive early diagnosis of these diseases. We reported candidates based on 4,4'-disarylbisthiazole (DABTA) scaffold with a high affinity towards α-syn and excellent selectivity over Aβ and tau fibrils. Based on prior in silico studies a focused library of 23 halide-containing and O-methylated DABTAs was prepared. The DABTAs were synthesized via a modified two-step Hantzsch thiazole synthesis, characterized, and used in competitive binding assays against [3H]PiB, and [3H]DCVJ. The DABTAs gave an overall chemical yield of 15 – 71%, with a calculated lipophilicity of 2.5 – 5.7. The ligands demonstrated an excellent affinity to α-syn with both [3H]PiB and [3H]DCVJ: Ki 0.1 – 4.9 nM and up to 20 – 3900-fold selectivity over Aβ and tau fibrils. It could be concluded that in-silico simulation is useful for the rational design of a new generation of DABTAs. Further investigation of the leads in the next step is encouraged: radiolabeling of the ligands with radioisotopes such as fluorine-18 or carbon-11 for in vivo, ex vivo and translational research and for further in vitro experiments on human-derived protein aggregates.

Let R be a commutative ring and m, n be positive integers. We define a proper submodule N of an R-module M to be (m,n)-closed if for r∈R and b∈M, r^{m}b∈N implies rⁿ∈(N:_{R}M) or b∈N. This class of submodules lies properly between the classes of prime and primary submodules. Many characterizations, properties and supporting examples concerning this class of submodules are provided. The notion of (m,n)-modules is introduced and characterized. Furhermore, the (m,n)-closed avoidance theorem is proved. Finally, the (m,n)-closed submodules in amalgamated modules are studied.

Histones display a wide variety of post-translational modifications, including acetylation, methylation, and phosphorylation. These epigenetic modifications can influence chromatin structure and function without altering the DNA sequence. Histones can also undergo post-translational O-GlcNAcylation, a rather understudied modification that plays critical roles in almost all biological processes and is added and removed by O-linked N-acetylglucosamine transferase and O-GlcNAcase, respectively. This review provides a current overview of our knowledge of how O-GlcNAcylation impacts the histone code both directly and by regulating other chromatin modifying enzymes. This highlights the pivotal emerging role of O-GlcNAcylation as an essential epigenetic marker.

A series of novel N-n-butyl-1,8-naphthalimide derivatives were synthesized via a three-step reaction involving nucleophilic substitution and acylation. All of the compounds were characterized by IR, ¹H NMR, ¹³C NMR, MS, and elemental analysis, and the crystal structure of N-n-butyl-4-[N’,N’-bis(2`,4`-dichlorobenzoyl)ethylamino]-1,8-naphthalimide was determined. The π-π stacking interactions and hydrogen bonds between the two molecular core planes (naphthalimide ring) and the van der Waals forces between the flexible n-butyl groups resulted in a 3D long-chain structure. The UV-vis and fluorescence properties of the title compounds were investigated. The results indicated that the monosubstituted 1,8-naphthalimide derivatives bearing an electron-donating group on the benzene ring or a structure with a larger conjugative effect exhibited enhanced fluorescence properties.

Let R be a commutative ring with identity and m, n be positive integers. In this paper, we introduce the class of (m,n)-prime ideals which lies properly between the classes of prime and (m,n)-closed ideals. A proper ideal I of R is called (m,n)-prime if for a,b∈R, a^{m}b∈I implies either aⁿ∈I or b∈I. Several characterizations of this new class with many examples are given. Analougus to primary decomposition, we define the (m,n)-decomposition of ideals and show that every ideal in an n-Noetherian ring has an (m,n)-decomposition. Furthermore, the (m,n)-prime avoidance theorem is proved.

Along with the familiar Rossby–Haurwitz waves, two-dimensional flows on the surface of a rotating sphere in the regime of zonostrophic turbulence harbour another class of waves known as zonons. Zonons are wave packets produced by energetic large-scale Rossby–Haurwitz wave modes `enslaving’ other wave modes. They propagate westward with the phase speed of the enslaving modes. Zonons can be visualized as enslaving modes’ `ringing’ in the enslaved ones with the frequencies of the former, the property that renders zonons non-dispersive. Zonons reside in high-shear regions confined between the opposing zonal jets yet they are mainly attached to westward jets and sustained by the ensuing barotropic instability. They exchange energy with the mean flow while preserving their identity in a fully turbulent environment, a feature characteristic of solitary waves. The goal of this study is to deepen our understanding of zonons’ physics using direct numerical simulations, a weakly non-linear theory, and asymptotic analysis, and ascertain that zonons are indeed isomorphic to solitary waves in the Korteweg - de Vries framework. Having this isomorphism established, the analysis is extended to eddies detected in the atmospheres of Jupiter and Saturn based upon the observed mean zonal velocity profiles and earlier findings that circulations on both planets obey the regime of zonostrophic macroturbulence. Not only the analysis confirms that many eddies and eddy trains on both giant planets indeed possess properties of zonons, but the theory also correctly predicts latitudinal bands that confine zonal trajectories of the eddies.

Wobbling motion as an exotic collective mode in nuclei without axial symmetry, was intensively discussed during the last few years. The observation of the newly proposed transverse wobbling, first reported in $^{135}$Pr and soon after in nuclei from other mass regions, was considered as a significant discovery in low-spin nuclear structure. However, both the reported experimental results and the proposed theoretical models were lively questioned in a series of works devoted to the investigation of the low-spin wobbling mode in the same nucleus. The electromagnetic properties of the $\Delta I=1$ transitions connecting the one- to zero-phonon and the two- to one-phonon wobbling bands in $^{135}$Pr were recently remeasured, demonstrating their predominant $M1$ magnetic character which is in contradiction with the wobbling motion interpretation. These new experimental observables being well reproduced by both quasiparticle-plus-triaxial-rotor model and interacting boson-fermion model calculations, are against the previously proposed wobbling characteristics of the low-spin bands in $^{135}$Pr. On the other hand, we obtained conclusive experimental evidence for the theoretically suggested transverse wobbling bands at medium spin in $^{136}$Nd. The comparison of the experimental data with calculations utilizing the triaxial projected shell model and a new developed particle-rotor model with frozen orthogonal geometry of the active nucleons, supports the description in terms of transverse wobbling of medium-spin bands in triaxial even-even nuclei.

Marine sponges, a well documented prolific source of natural products, harbors numerous microbial communities believed to possess N-acyl homoserine lactones (AHLs) mediated Quorum sensing (QS) as one of the mechanisms of interaction. Bacteria and eukaryotic organisms are known to produce molecules that can interfere with QS signaling, thus affecting microbial genetic regulation and function. In the present study, we established the potential for production of both QS signal molecules as well as QS interfering molecules (QSI) in the same sponge species Sarcotragus spinosulus. A total of eighteen saturated acyl chain AHLs were identified along with six putative unsaturated acyl chain AHLs. Bioassay guided purification led to the isolation of two brominated metabolites with QS-interfering activity. The structures of these compounds were elucidated by comparative spectral analysis of 1HNMR and HR-MS data and was identified as 3-Br-N-methyltyramine (1) and 5,6-dibromo-N,N-dimethyltryptamine (2). The QSI activity of compounds 1 and 2 were evaluated using reporter gene assays for long- and short-chain signals (E. coli pSB1075 and E. coli pSB401) and was confirmed by measuring dose dependent inhibition of proteolytic activity and pyocyanin production in P. aeruginosa PAO1. The obtained results showed the co-existence of QS and QSI in S. spinosulus, a complex network which may mediate the orchestrated function of the microbiome within the sponge holobiont.

A simple protocol for preparation of O-acylated enol form - (R/S)-ethyl-2-acetoxy-4-phenyl-4H-chromene-3-carboxylate 5 was presented. The compound was characterized by 1H-, 13C-and DEPT135 NMR spectra, including {1H,1H} COSY, {1H,13C} HSQC, {1H,13C} HMBC and 2D-NOESY spectra. The preferred regioselectivity for O-acylation of 3,4-dihydrocoumarin 5 in the presence of substituent in 4-th position in the chroman ring and accounting the steric hindrance of the ester group in 3-th place was confirmed.

(1) Background: Plasmodium vivax causes the largest malaria burden in Brazil, and chloroquine resistance poses a challenge to eliminating malaria by 2035. Illegal mining in the Roraima Yanomami indigenous territory can lead to the introduction of resistant parasites. This study aimed to investigate mutations in the pvcrt-o and pvmdr-1 genes to determine their potential as predictors of P. vivax chloroquine-resistant phenotypes. (2) Methods: Samples were collected in two health centers of Boa Vista. A questionnaire was completed, and blood was drawn from each patient. Then, DNA extraction, PCR, amplicon purification, and DNA sequencing were performed. After alignment with the Sal-1, the amplified fragment was analyzed. Patients infected with the mutant parasites were queried in the Surveillance Information System. (3) Results: 98% (157/164) of participants were from illegal mining areas. The pvcrt-o was sequenced in 151 samples, and the K10 insertion was identified in 13% of them. The pvmdr1 was sequenced in 80 samples: the MYF haplotype (958M) was detected in 92% of them, the TYF in 8%, while MYL was absent. No cases of recrudescence, hospitalization, or death were found. (4) Conclusions: Mutations in the pvcrt-o and pvmdr-1 genes have no potential to predict chloroquine resistance in P. vivax.

Abstract: (1) Background: Surgery is the best curative option for Gastric Cancer (GC). However, morbimortality associated with surgery still a significant problem. Thus, it is essential to determine the preoperative surgical risk, to optimize outcomes in higher risk patients. (2) Methods: Patients who underwent curative gastrectomy between January 2010 and December 2013 were included, obtaining a sample of 131 patients, and the acuity of the scales understudy was evaluated. The predictive power of the scales was evaluated through calibration and discrimination. (3) Results and Conclusions: Regarding mortality, the scales demonstrated good calibration, with POSSUM and P-POSSUM obtaining the best O:E ratio. The scales presented good discrimination, with POSSUM showing the best result. Considering morbidity, the scales showed good calibration and discrimination. POSSUM and P-POSSUM seem to have potential in predicting morbidity and mortality when applied to the studied population, but there is a need for further studies in this area.

Protein O-GlcNAcylation has been associated with neurodegenerative diseases such as Alzheimer´s disease (AD). O-GlcNAcylation of Amyloid Precursor Protein (APP) regulates both the trafficking and the processing of the APP through the amyloidogenic pathway, resulting in the release and aggregation of the Aβ1-42 peptide. Microglia clear Aβ aggregates and dead cells to maintain brain homeostasis. Here, using LC-MS/MS we reveal that the Aβ1-42 peptide modifies the microglia O-GlcNAcome. We have identified 55 proteins, focusing our research on Galectin-1 protein, since it is a very versatile protein from a functional point of view. Combining biochemical with genetic approaches we demonstrate that Aβ1-42 peptide specifically targets Galectin-1S8 O-GlcNAcylation via OGT. In addition, this Gal-1-O-GlcNAcylated form, in turn, controls human microglia migration. Given the importance of microglia migration in the progression of AD, this study reports the relationship between Aβ1-42 peptide and Serine 8- O-GlcNAcylation of Galectin to drive microglial migration

The blue sepal color of hydrangea is due to a metal complex anthocyanin composed of 3-O-glucosyldelphinidin (1) and an aluminum ion with the co-pigments 5-O-caffeoylquinic acid (2) and/or 5-O-p-coumaroylquinic acid (3). The three components, namely, anthocyanin, Al³⁺ and 5-O-acylquinic acids, are essential for blue color development, but the complex is unstable and only exists in aqueous solution. Furthermore, the complex did not give analyzable NMR spectra or crystals. Therefore, many trials to determine the detailed chemical structure of the hydrangea-blue complex have failed to date. Instead, via experiments mixing 1, Al³⁺ and 2 or 3 in a buffered solution at pH 4.0, we obtained the same blue solution derived from the sepals. However, the ratio was not stoichiometric but fluctuated. To determine the composition of the complex, we tried direct observation of the molecular ion of the complex using electrospray-ionization mass spectrometry. In a very low-concentration buffer solution (2.0 mM) at pH 4.0, we reproduced the hydrangea-blue color by mixing 1, 2 and Al³⁺ in ratios of 1:1:1, 1:2:1 and 1:3:1. All solution gave the same molecular ion peak at m/z = 843, indicating that the blue solution has a ratio of 1:1:1 for the complex. By using 3, the observed mass number was m/z = 827 and the ratio of 1, 3 and Al³⁺ was also 1:1:1. A mixture of 1, 3-O-caffeoylquinic acid (4) and Al³⁺ did not give any blue color but instead was purple, and the intensity of the molecular ion peak at m/z = 843 was very low. These results strongly indicate that the hydrangea blue-complex is composed of a ratio of 1:1:1 for 1, Al³⁺ and 2 or 3.

In this work, a novel heterojunction based on ZnSnO3/ZnO nanofibers was prepared using electrospinning method. The crystal, structural and surface compositional properties of sample based on ZnSnO3 and ZnSnO3/ZnO composite nanofibers were investigated by X-ray diffractometer (XRD), Scanning electron microscope (SEM), X-ray photoelectron spectrometer (XPS) and Brunauer-Emmett-Teller (BET). Compared to pure ZnSnO3 nanofibers, the ZnSnO3/ZnO heterostructure nanofibers display high sensitivity and selectivity response with fast response towards ethanol gas at low operational temperature. The sensitivity response of sensor based on ZnSnO3/ZnO composite nanofibers were 19.6 towards 50 ppm ethanol gas at 225°C, which was about 1.5 times superior than that of pure ZnSnO3 nanofibers, which can be owed mainly to the presence of oxygen vacancies and the synergistic effect between ZnSnO3 and ZnO.

Dimethylformamide (DMF), a polar solvent, is commonly used for preparing graphene/epoxy nanocomposites. While commonly previous research has predominantly highlighted the improvement in physio-mechanical properties of these nanocomposites, the effect of DMF on processing and its direct influence on the final characteristics of MXene/epoxy nanocomposites have not been investigated.This unexplored link between DMF dosage, MXene concentrations, and the final composite properties presents an exciting direction for future research. In this study, a fixed dosage of DMF was used with varying MXene concentrations to fabricate the nanocomposites. To assess the reliability of DMF dosage on the characteristics of the fabricated nanocomposites, various evaluation techniques were employed, including dispersion evaluation, mechanical tests, thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), scanning electron microscopy (SEM), electromagnetic interference (EMI) shielding, and surface roughness measurements. The research outcomes revealed that as MXene concentration increased, the characteristics of the MXene/epoxy nanocomposites, improved across the board, indicating their potential for use in energy storage applications.

Herein, two title compounds, N-Benzoyl-N’-4-cyanophenyl thiourea (I) and N-(4-nitrobenzoyl)-N’-4-cyanophenyl thiourea (II) were synthesized in high yield, via aroyl isocyanate and 4-aminobenzonitrile. The structure of the prepared compounds was characterized by elementary analysis and FT-IR, ¹H, ¹³C NMR spectroscopic methods. Cyclic voltammetric (CV) experiments were performed with glassy carbon electrode. The reduction potential values of different functional group such as nitro, cyano in title compounds were investigated using CV curves.

An extensive thermodynamic study of N-methylformamide (CAS RN: 123-39-7) and N,N-dimethylformamide (CAS RN: 68-12-2), is presented in this work. The liquid heat capacities of N-methylformamide were measured by Tian–Calvet calorimetry in the temperature interval (250 – 300) K. The vapor pressures for N-methylformamide and N,N-dimethylformamide were measured using static method in the temperature range 238 K to 308 K. The ideal-gas thermo-dynamic properties were calculated using a combination of the density functional theory (DFT) and statistical thermodynamics. A consistent thermodynamic description was developed using the method of simultaneous correlation, where the experimental and selected titerature data for vapor pressures, vaporization enthalpies, and liquid phase heat capacities and calculated ide-al-gas heat capacities are treated together to ensure overall thermodynamic consistency of the results. Resulting vapor pressure equation is valid from the triple point to the normal boiling point temperature.

The use of thiosemicarbazones (TSCs) as ligands for the functionalization of nanoparticles (NP) for various purposes, such as the covalent immobilization is fueled by their modular character (thiosemicarbazides + carbonyl compound), allowing enormously broad variation of up to four substituents on the main R1R2C=N(1)–NH–C(S)–N(4)R3R4 core. For R1 and R2 we introduced di-2-pyridyl ketone for the coordination of metals and 9-anthraldehyde for luminescence. R3 and R4 substituents were varied for various purposes. Amino acids were functionalized at the N4 position to [R1R2TSC–spacer–amino acid] conjugates for future peptide conjugation or for direct anchoring to NP via their carboxylic function. Further direct NP anchoring functions such as phosphonic acid (OP(OH)2), glucose, o-hydroquinone, OH, and thiol (SH) were introduced with or without separation through hydrocarbon spacer units such as phenyl, cyclohexyl, benzyl, ethyl and methyl in [R1R2TSC–spacer–anchor group] conjugates. [R1R2TSC–spacer–end group] conjugates including OH, S-Bn (Bn = benzyl), NH-Boc (Boc = tert-butyloxycarbonyl), COOtBu, or N3 end groups were produced for the facile formation of amide, ester, or triazine conjugates through click chemistry. The synthesis of the thiosemicarbazides H2NH–C(S)–NR3R4 starting from amines, including amino acids, SCCl2 or CS2, and hydrazine and their condensation with dipyridyl ketone and anthraldehyde lead finally to 34 new TSC derivatives. They were synthesized in up to six steps with overall yields ranging from 10 to 85% and were characterized by a combination of elemental analyses, mass spectrometry, and magnetic nuclear resonance spectroscopy. UV-vis absorption and photoluminescence spectroscopy allowed to easily trace the dipyridyl imine and anthracene chromophores.

Background: One of the main diseases of worldwide concern is non–insulin dependent Diabetes mellitus. 90-95% of patients with diabetes suffers from Type II diabetes, a metabolic diabetes whose prevalence is increasing in the world.Given the current prevalence of diabetes type II in society, research of natural compounds able to regulate glycaemia and insulin–resistance is nowadays covering importance, as alternative or co–adjuvant treatment to existing hypoglycaemic medicines. In pre–clinical steps of research, C. elegans is considered a promising in vivo model for the study of the molecular mechanism of glucose as part of anti–diabetic bioactivity.Most of the studies of insulin resistance with this in vivo model are carried out by using mutant strains such as daf-2 and the effects of the compounds are attributed a posteriori, after a physiological response of the worms rather than directly measuring preservation of activity inside the worm. Methods: The in vitro α-glucosidase inhibition of two oral formulations with Origanum vulgare extract before and after a simulated process of gastrointestinal digestion was evaluated. After confirming the in vitro activity, the α-glucosidase inhibition was tested in vivo through the new method proposed. Results: The crude extract showed an IC50 value similar to acarbose (positive control), before and after the gastrointestinal digestion. The encapsulated extract (111.86±1.25 µg/mL) did not present statistical differences with the positive control (110.10±1.15 µg/mL) after digestion. However, the powder formulation showed the highest hypoglycaemic activity (59.55±0.85 µg/mL).In vivo, the IC50 values showed similar profile than in vitro. Conclusion: A new simple and reliable method has been developed to determine pharmacological activities inside in vivo model C. elegans.The method has been evaluated with a hydroalcoholic extract of O. vulgare. The method is accurate and valid for the quantification of the inhibition of in vivo, allowing the direct attribution of this in vivo hypoglycaemic activity to the treatment. In addition, it opens the door to further research into in vitro pharmacological activities that require an in vivo counterpart.

We solve the And\^{o} dilation problem for linear maps on vector space asked by Krishna and Johnson in \textit{[Oper. Matrices, 2022]}. More precisely, we show that any commuting linear maps on vector space can be dilated to commuting injective linear maps.

The effects of shade netting on the morphological and chemical composition (organic acids, sugars, total polyphenols, total and certain anthocyanins, proanthocyanidins) and in vitro antioxidant activity of raspberries and blackberries was conducted in the southeastern region of the Republic of North Macedonia. HPLC analysis confirmed a significant effect of shading nets on the amount of the most dominant anthocyanin in blackberries and raspberries. The amount of cyanidin-3-O-glucoside in blackberries covered with shading nets was significantly higher in comparison to the amount of the same anthocyanins in uncovered blackberries. The same tendency was observed for cyanidin-3-O-sophoroside for covered and uncovered raspberries from 2023. However, an opposite relationship was noticed for total anthocyanin content in favor of uncovered blackberry and raspberry from 2023. From all examined organic acids, the amount of acetic acid was the most affected in covered raspberries. The shade netting had a significant influence on polyphenolic content (such as high molecular proanthocyanidins, total and particular anthocyanins), the amounts of sugars (glucose and fructose), and organic acids as well as the intensity of color in blackberry and raspberry. Although net shading significantly influenced particular phenolic compounds presented in examined berry fruits, antioxidant activity was weakly correlated to this environmental change.

This paper presents a theory on graph topological structure and graph coloring, proving that for any N-order graph structure (with a topological structure similar to ), the maximum number of colors required for coloring is less than or equal to . The Four Color Theorem is just one special case of this theory, with the maximum structure size for a four-color graph being a 4-order structure graph, hence requiring only a maximum of 4 colors for coloring.

Background: When homeostasis is disturbed it can occur a pathological event named inflammation. The main drugs used in the treatment consist of the non-steroidal and steroidal anti-inflammatory drugs. However, the side effects remain an obstacle during the treatments. In this work we aimed to evaluate three new regioisomers analogues of naphthyl-N-acylhydrazone derivatives. Methods: Acute models of inflammation in vivo (formalin-induced licking and carrageenan-induced inflammation) as well as in vitro were used to evaluate the effects of LASSBio-2039, LASSBio-2040, and LASSBio-2041. Results: All three substances (at 1, 10 or 30 µmol/kg) presented significant effect in the in vivo model reducing leukocyte migration, nitric oxide (NO) and interleukin-1β production. It was observed that only LASSBio-2039 significantly reduced cell migration in vitro. None of the LASSBios did affect inducible nitric oxide synthase activity nor presented NO scavenger effect. It was not observed any toxic effect neither in vivo nor in vitro. The new regioisomers analogues of naphthyl-N-acylhydrazone derivatives presented a significant anti-inflammatory activity suggesting LASSBio-2039 with a direct effect in leukocytes migratory capacity. Conclusions: Taken together the data indicate that these substances present promising effect for de development a prototype for new drugs.

This article utilized electrodeposition technology to fabricate Zn and Zn-Y₂O₃-Al₂O₃ composite coatings on Q235 steel plates. The composite coatings were obtained by adding Y₂O₃/Al₂O₃ nanoparticles (0, 5, 10, and 15 g/L) to acidic chloride solutions. This study then examined the impact of these nanoparticles on the microstructure, morphology, microhardness, hydrophobicity, and corrosion resistance of the composite coatings. The results indicate that the addition of the nanoparticles increased the nucleation sites on the surface of the coating, thereby refining the grain size and reducing the roughness of the coating surface. When 10g/L of Y₂O₃ and 10g/L of Al₂O₃ nanoparticles were added, the hardness of the composite coating (369 Hv) was 2.49 times higher than that of the pure Zn coating (148 Hv), which was attributed to the dispersion strengthening and grain refinement effects of the nanoparticles. The corrosion resistance of the Zn and Zn-Y₂O₃-Al₂O₃ composite coatings was studied using linear sweep voltammetry and AC impedance spectroscopy. The addition of the nanoparticles improved the corrosion resistance of the composite coating, and the composite coating prepared in an electrolyte containing 10 g/L of Y₂O₃ and 10 g/L of Al₂O₃ nanoparticles exhibited the best corrosion resistance. Meanwhile, the composite coating exhibited good hydrophobicity, with a contact angle of 120.9°, 1.94 times that of the pure Zn coating (62.2°). The Zn-Y₂O₃-Al₂O₃ nanocomposite coating material has significant potential advantages in the field of steel corrosion.

Classifying spinal tumors can be challenging due to nonspecific clinical and radiological qualities, and a precise biopsy is crucial for an accurate diagnosis and treatment planning. This study aimed to enhance the accuracy and efficiency of spinal biopsies integrating Cone Beam Computed Tomography (CBCT) and magnetic resonance imaging (MRI) modalities using an O-arm CT navigation system. Eighteen patients with diverse spinal lesions underwent 18 biopsies following the Stealth Station navigation system Spine 8 protocol. Preoperative MRI scans were merged with intraoperative CT navigation systems for continuous monitoring during the biopsy process. The combined imaging technique accurately identified the diseased lesion type in all biopsies, demonstrating 100% sensitivity and specificity. In conclusion, combining MRI and CT imaging modalities significantly improved spinal biopsy accuracy and efficiency, differentiating between pathological entities. However, large-scale studies are desired to validate these findings and investigate potential benefits in different clinical scenarios. Although this method requires general anesthesia, its potential profits in avoiding misdiagnosed lesions and decreasing the need for further invasive procedures make it a promising approach for improving spinal biopsy accuracy and efficiency.

Oxidation of a mixture of nonlabelled (14N2H4) and 15N labeled (15N2H4) hydrazine in aqueous solutions produces 14N15N molecules, indicating the intermediate existence of N4H6 or N4H4 dimers with subsequent transfers of H atoms and splitting of lateral N-N bonds. To explain the key part of hydrazine oxidation reaction, the structures, thermodynamics, and electron characteristics of N4H4 molecules in aqueous solution are investigated at CCSD/cc-pVTZ level of theory. We have not found any spontaneous splitting of the bond between lateral nitrogen atoms in tetrazenes N4H4 during geometry optimization. The most probable N4H4 oxidation products are H2N-NH2 and N2, which are obtained by splitting the bond between central nitrogen atoms and so only 15N2 and 14N2 molecules are formed. Additionally, the formation of H3N-NH and N2 oxidation products is also preferred to structures without any N-N fissions. The formation of H2N=N and HN=NH reaction products is energetically less advantageous. Cyclo-N4H4 structures are stable, without any N-N fissions, but their very high Gibbs energies indicate their vanishing abundance in aqueous solution, so their involvement in hydrazine oxidation is highly improbable. Hydrazine oxidation to 14N15N molecules cannot be explained by tetrazene N4H4 intermediates.

A mixture of nonlabeled (14N2H4) and 15N labeled hydrazine (15N2H4) in an aqueous solution is oxidized to 15N2, 14N2, and 14N15N molecules, indicating the intermediate existence of the 14NH2-14NH-15NH-15NH2 with subsequent hydrogen transfers and splitting of side N-N bonds. Structures, thermodynamics, and electron characteristics of various N4H6 molecules in aqueous solutions are investigated using theoretical treatment at the CCSD/cc-pVTZ level of theory to explain the crucial part of the hydrazine oxidation reaction. Most N4H6 structures in aqueous solutions are decomposed during geometry optimization. Splitting the bond between central nitrogen atoms is the most frequent, but the breakaway of the side nitrogen is energetically the most preferred. The N-N fissions are enabled by suitable hydrogen rearrangements. Gibbs free energy data indicate the dominant abundance of NH3... N2... NH3 species. The side N atoms have very high negative charges, which should support hydrogen transfers in aqueous solutions. The only stable cyclo-(NH)4…H2 structure has a too high Gibbs energy and breaks the H2 molecule. The remaining initial cyclic structures are split into hydrazine and HN≡NH or H2N≡N species, and their relative abundance in aqueous solutions is vanishing.

Balanced nitrogen (N) and phosphorus (P) rates coupling with rational fertilization methodology could promote crop N accumulation, N use efficiency and yield production, particularly in semi-arid and arid regions. To test these characteristics, a two-year (2018 and 2019) pot experiment was therefore performed by growing summer maize in a rain-proof glass greenhouse, under 9 combined N (112, 150 and 187 kg ha-1, urea) and P (45, 60, 75 kg ha-1, calcium superphosphate) rates and three contrasting fertilizer placements. The fertilizers were placed by broadcast on soil surface (Broadcast), side band on 4 cm strip soil surface within 7 cm from sowing line (Side band) and deep band on 4 cm strip below 7 cm soil depth within 7 cm from sowing line (Deep band). Results from three maize growth stages (eight-leaf, 45 days after sowing, DAS; tasseling, 60 DAS; and harvest, 115 DAS) showed that leaf, stem, root N accumulation and total soil N were significantly increased under Deep band than under both Side band and Broadcast at N150P60, N187P60, N150P75 and N187P75, but not at N112P45, N150P45, N187P45, N112P60 and N112P75. Significantly greater leaf, stem, and root N accumulations were also displayed at N150 and N187 than at N112 for the same P60 or P75 under Deep band at 60 DAS and 115 DAS, while were for leaf and stem N accumulations at P75 and P60 than at P45 for the same N150 under Deep band at 45 DAS, 60 DAS and 115 DAS. Significantly greater agronomy N use efficiency, partial factor productivity and N use efficiency exhibited under Deep band than under Side band and Broadcast at N150P75 and N187P75, but at N150P60 and N187P60 for NUE only. In addition, leaf, stem, seed, root N concentrations positively correlated with their own N accumulations or soil N concentration at tasseling and harvest stages. Our results demonstrate that a synchronized N150P60, N187P60, N150P75 or N187P75 fertilization rate with Deep band placement can improve soil N availability and root N uptake, and hereby greater aboveground N accumulation, N use efficiency and yield production of maize particularly practical for small-holder farmers globally.

Throughout this paper, we will establish a comprehensive theoretical foundation and rigorously develop the methodology to investigate the structure of quotient ring S/P under the influence of symmetric generalized n-derivations, where S represents an arbitrary ring, and P signifies a prime ideal of S satisfying certain algebraic identities acting on prime ideal P without relying on the assumption of primeness or semi-primeness of the ring.

The seasonal and vertical spatial variation characteristics of total N, NH4+—N and NO3-—N in the soil in Picea mongolica forest at different stand ages were studied. The results showed that: (1) NH4+ —N in the soil in Picea mongolica forest was positively correlated with sample date, soil NO3-—N and forest age (P <0.05), and negatively correlated with soil depth (P < 0.01). NO3-—N in the soil in Picea mongolica forest was negatively correlated with sample date and forest age (P < 0.05), and significantly negatively correlated with soil depth (P < 0.01); (2) the content of NH4+—N is greater than that of NO3-—N in each soil layer of Picea mongolica forest at three forest ages. The correlation analysis showed which had an impact on the content of NH4+—N and NO3-—N in the soil in Picea mongolica forest. The content was lower in February and November, and higher in May and August；(3) The contents of total N, NH4+—N and NO3-—N in the soil of Picea mongolica forest in the three forest ages increased with the depth of soil layer (0-50cm), and showed an overall downward trend. The contents of NH4+—N in the soil layer of young forest (0-10cm, 10-20cm and 20-30cm, 30-40cm and 40-50cm) were significantly different (P＜0.05), and the contents of NO3-—N were also significantly different (P＜0.05), while their contents of middle-aged forest and near mature forest increased with the depth of soil layer, There was no significant difference in the content of NH4+—N; (4) The content of NH4+—N in the soil in Picea mongolica forest generally showed the following change trend near mature forest > middle-aged forest > young forest. The change trend of soil NO3-—N content is consistent with that of the content of NH4+—N in the soil in Picea mongolica forest.

This article aims to present the outcomes of a study focused on collaboratively developing an Innovation Management Model (IMG) tailored for Colombia's leather agro-industrial chain. The study integrates stakeholder participation, prioritization of variables, literature review, and model validation, emphasizing sustainability considerations throughout the process. Methodologically, it involved a literature review using Scopus, focusing on innovation management models, open innovation, and sustainability, particularly within the leather sector. The search identified 43 documents in Scopus, of which 15 were directly relevant; this analysis was complemented by 18 articles from Google Scholar. Three surveys were conducted to prioritize variables, utilizing Lik-ert-scale questions to assess relevance and congruence. Conceptual innovation models were validated graphically. Initial variables were identified, with 53 selected for the entry stage, 36 for the transformation stage, and 31 for the exit stage. These variables were classified for each stage, resulting in three innovation management models for validation. Key findings included 26 critical variables covering aspects such as agricultural and technological innovation in platforms and projects, capacity development, R&D activities, supply chain dynamics, innovation management processes, knowledge and technology integration, business model adaptation for sustainable development, and environmental impact assessment. The prioritized innovation model is in-tended to assist stakeholders in the leather sector's innovation system by promoting open inno-vation strategies, sustainable and regenerative innovation generation, and enhancing strategic and technological capacities. The prioritized innovation model aims to assist stakeholders in the leather sector's innovation system by promoting open innovation strategies, sustainable and re-generative innovation generation, and enhancing strategic and technological capacities.

This study introduces an integrated methodology that incorporates vessel motion dynamics into the evaluation of operations and maintenance (O&M) costs for floating offshore wind turbines (FOWTs). By combining UWiSE, a discrete-event simulation tool, with SafeTrans, a voyage simulation software, the methodology accounts for vessel motion effects during offshore operations. The approach was demonstrated through a numerical case study at two wind farm sites, Marram Wind and Celtic Sea C, with a fictive wind farm layout of 100 × 15 MW NREL turbine on a UMaine VolturnUS-S platform. Three Major Component Replacement (MCR) strategies were assessed: Tow-to-Port (T2P), Floating-to-Floating (FTF), and Self-Hoisting Crane (SHC). The T2P strategy resulted in the highest O&M costs—94 k€/MW/year at Marram Wind and 97 k€/MW/year at Celtic Sea C—due to extended MCR durations (90-180 days), leading to lower availability (90%-94%). In contrast, the FTF and SHC strategies, which are still under development, demonstrate significantly lower costs and reduced downtime. The SHC strategy, in particular, has proven to be the most cost-effective, achieving up to a 64% reduction in costs while increasing availability to 97%-98%. The integrated approach incorporates vessel dynamics, accounting for factors such as wave direction, wave period, and vessel response to varying sea states. This allows for greater flexibility in setting operational limits, potentially permitting higher limits in favorable conditions where vessel motion impact is reduced. However, in scenarios where dynamic vessel responses lead to increased motions—such as when waves approach from the side or when the wave period is close to the vessel's natural roll period—more restrictive limits may be necessary, even if significant wave heights are lower. This flexibility or restriction highlights the importance of incorporating motion-based dynamics for emerging technologies in the evolving FOWT O&M market.

The encapsulation of bacteria in emulsion droplets offer various advantages over other conventional methods of encapsulation such as improvement in bacterial viability and may served as microenvironments for bacterial growth. Nevertheless, changes in temperature may affect bacterial viability and droplet stability. In this study, the encapsulation of bacteria in single water-in-oil (W/O) and double water-in-oil-in-water (W1/O/W2) emulsions was investigated under cold storage with a study on temperature-modulated release. The microencapsulation of bacteria in emulsion droplets was achieved by using a flow-focusing microfluidic device. Droplets stability was determined by measuring changes in droplets size and creaming behaviour at different temperatures. Thermal properties of the samples were determined by using differential scanning calorimetry while the release of bacteria with change in temperature was determined by measuring colony form unit (CFU) of the released bacteria and fluorescence microscopy. Higher bacterial viability was observed for encapsulated samples as compared to free cells indicating the ability of emulsion system in improving the bacterial viability during cold temperature storage. Crystallization temperature was lowered in the presence of bacteria, but the melting temperature was similar with or without bacteria. Storage in freezing temperatures of -20°C and -80°C leads to an extensive droplet destabilization with immediate release of encapsulated bacteria upon thawing in which temperature modulated release of encapsulated bacteria was achieved. This study provides an overview of the potential application of emulsion droplets for encapsulation and controlled release that is beneficial for various applications such as food and pharmaceuticals.

One of the still debated topics regarding the olfactory function concerns the presence or absence of sex-related differences of individuals. In this study, we checked for a relationship between the olfactory function of females and males and their ability to perceive single molecules, and how this can influence the intensity with which the complex odor formed by a set of single molecules is perceived. First, females and males were classified as normosmic or hyposmic based on the TDI olfactory score obtained using the Sniffin' Sticks test. Subsequently, the headspace of roasted coffee beans as a complex olfactory stimulus was broken down into single molecules by means of a chromatographic column; these were simultaneously conveyed to a mass spectrometer (for their subsequent classification) and to the human nose which acts as a chemical sensor by means of an olfactometer port. The results obtained with this gas chromatography-olfactometry approach show both qualitative and quantitative differences between females and males, with females performing better than males. In addition, the odor intensity reported by females when sniffing pen #10 containing coffee aroma is significantly higher than that reported by males. In conclusion, these data highlight that the human ability to perceive both single compounds and complex odors is strongly conditioned, not only by olfactory function of individuals, but also by their sex.

In this work, oxygen-doped g-C3N4 mesoporous nanosheets (O-CNS) were synthesized via a facile recrystallization method with the assistance of H2O2. The crystal phase, chemical composition, morphological structure, optical property, electronic structure and electrochemical property of the prepared O-CNS samples were well investigated. The morphological observation combining with nitrogen adsorption-desorption results demonstrated that the prepared O-CNS samples possessed nanosheets-like morphology with porous structure. The O doping into g-C3N4 resulted in the augment of specific surface area, which could provide more active sites for photocatalytic reaction. Simultaneously, the visible-light absorption capacity of O-CNS samples was boosted owing to the regulation of O doping. The built energy level induced by the O doping could accelerate the migration rate of photoinduced carriers, and the porous structure was most likely to speed up the release of hydrogen during photocatalyic hydrogen process. Resultantly, the photocatalytic hydrogen production rate of the optimized oxygen-doped g-C3N4 nanosheets reached up to 2012.9 μmol•h-1•g-1, which was 13.4 times higher than that of bulk g-C3N4. Thus, the significantly improved photocatalytic behavior was imputed to the porous structure, the augment of active sites, and the enhancement of visible light absorption and charge separation efficiency.

The scalp is a unique anatomical region with distinct challenges for reconstruction, especially in cases of melanoma excision. This study explores the utilization of the O-Z flap technique as an alternative approach for patients with melanoma, where traditional free flap reconstruction may not be feasible due to age or underlying health conditions. However, in this case, the patient had a history of angina and was unwilling to undergo a long operation due to his advanced age. This study highlights the importance of following NCCN guidelines for melanoma resection margins based on tumor thickness and underscores the value of staged resection planning to minimize deficits. This requires an individualized approach as each patient may have different circumstances (general health condition, age, compliance, etc.). So we planned a staged excision first. In the first surgery, we would resect the tumor minimally and then determine the exact size of the tumor. Then, in the second surgery, we resected it with a safety margin according to the guidelines. The O-Z flap, a local flap with an "O"-shaped defect and "Z"-shaped incision line, is introduced as a reconstructive option. The surgical procedure, advantages, and limitations of this approach are discussed. This study provides valuable insights into achieving successful scalp reconstruction while considering aesthetic outcomes and patient-specific factors.

The association between human and cat (F. catus) is well known. This domestic animal is also known for its malodorous urine and feces. The complexity of the odorous urine and feces impacts human life by triggering the human sensory organ in a negative way. The objective of this research was to identify the volatile organic chemicals (VOCs) and associated odors in cat urine and feces using gas chromatography-mass spectrometry and simultaneous sensory analysis of fresh and aged samples. The solid-phase microextraction (SPME) technique was used to pre-concentrate the VOCs emitted from urine or feces samples. Twenty-one compounds were identified as emitted from fresh urine, whereas 64 compounds were emitted from fresh feces. A contrasting temporal impact was observed on the emission of VOCs for urine and feces. On aging, the emission increased to 36 detected chemicals for stale urine, whereas only 17 chemicals were detected in stale feces. Not all compounds were malodorous; some compounds had a pleasant hedonic smell to the human nose. Although trimethylamine, low molecular weight organic acids, and ketones were contributors to the odor to some extent, phenolic compounds and aromatic heterocyclic organic N compounds generated the most intense odors and substantially contributed to the overall malodor, as observed by this study. This work might be useful to formulate cat urine and feces odor remediation approaches to reduce odor impacts.

Synthesis of poly(o-phenylenediamine) (PoPD) and poly(o-phenylenediamine)-ZnO (PoPD-ZnO) nanocomposites on carbon steel by in-situ polymerization with HCl acid as doping acid Material coating. The composition and structure of PoPD-ZnO nanocomposites were characterized by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD) and scanning electron microscopy (SEM). The corrosion protection ability of polymer coatings in 3.5% NaCl was studied by potentiodynamic polarization curves and electrochemical impedance spectroscopy. It can be seen from the electrochemical corrosion experimental data that PoPD-WPU coating (PWC) and PoPD-ZnO-WPU coating (PZWC) can effectively improve the corrosion resistance of the carbon steel substrate, and the corrosion rate is reduced by 2-3 orders of magnitude compared with carbon steel. The conclusion demontrates that PoPD can effectively extend the service life of carbon steel substrates. In addition, it is advantageous to form a compact and low-defect coating when added nano-particle ZnO, which is advantageous for the POPD film to develop its good barrier property and corrosion resistance.

Reducing fertilizer-N rate, applying nitrification inhibitor (NI), and incorporating straw are widely recommended to improve N use efficiency of crops and decrease N losses. However, how these practices affect crop N uptake by regulating the fertilizer-N fate during the growing season is not well understood. We conducted a field 15N tracer study to explore the effectiveness of reduced N application, NI, and straw incorporation on fertilizer-N fates for maize cultivation in Northeast China. The following six treatments were used: 1) no N fertilization (control); 2) 200 kg urea-N ha−1 (100%N); 3) 200 kg urea-N ha−1 and 2400 kg dry-straw ha−1 (100%N+S); 4) 160 kg urea-N ha−1 (80%N, i.e., 20% reduction of N fertilization); 5) 160 kg urea-N ha−1 and nitrification inhibitor (Nitrapyrin) (80%N+NI); 6) 160 kg urea-N ha−1, nitrification inhibitor and 2400 kg dry-straw ha−1 (80%N+NI+S). Our results showed that the five N fertilization treatments yielded 16%–25% more grain and 39%–60% more crop N uptake than the control receiving no N fertilizer, but the differences among the five treatments were not statistically significant. In contrast to plant growth, changes in fertilizer-N fates in soil and plant pools were more pronounced. Compared with the 100%N treatment, 20% fertilizer-N reduction (80%N) decreased 15N concentration in topsoil and plant pools but increased the proportion of plant 15N recovery at harvesting (N use efficiency, NUE15N, 60% vs. 50%) (P &lt; 0.05). Nitrapyrin co-application (80%N+NI) delayed soil nitrification and increased soil 15N retention at harvesting (52% vs. 36%), thereby decreasing NUE15N significantly (P &lt; 0.05). Straw incorporation (100%N+S) decreased fertilizer-N retention compared with NI co-application because it promoted NUE15N significantly (P &lt; 0.05). The combined application of NI and straw (80%N+NI+S) was more conducive to fertilizer-N retention in soil. Our findings demonstrate that NI and straw additions are efficient strategies for stabilizing fertilizer-N in soils and potentially minimizing N loss; however, their effects on NUE15N vary and the related mechanism must be further clarified in long-term trials.

FLH 13-11 is an F1 interspecific hybrid muscadine grape genotype that was developed to produce new anthocyanins for pigment color stability. This hybrid resulted from a cross between ‘Marsh’ (Vitis munsoniana) and ‘Magoon’ (V. rotundifolia). This report characterizes the anthocyanins produced in fully ripe berries, and reveals a significant difference in total anthocyanin contents from two continuous cropping seasons. High-performance liquid chromatography with a diode array detector (HPLC-DAD) and HPLC-quadrupole time-of-flight tandem mass spectrometry (HPLC-qTOF-MS/MS) were used to profile anthocyanins in berries. The resulting data showed that fourteen anthocyanins were detected, six from 2011 and nine from 2012, with only one produced in both seasons. However, the anthocyanidin profiles of berries were the same. Five anthocyanins were annotated as diglucosides of anthocyanidins based on MS/MS features, including delphinidin 3,5-diglucoside produced in both seasons, cyanidin 3,5-diglucoside mainly formed in 2011, petunidin 3,5-diglucoside, malvidin 3,5-diglucoside, and peonidin 3,5-glucoside only detected in 2012. Also, three anthocyanidin-diglucoside like anthocyanins and three monoglucosides including peonidin 3- glucoside, delphinidin 3- glucoside like, and pelargonidin 3- glucoside like anthocyanins, were detected in 2011 and 2012, respectively. These results indicate that FLH 13-11 can produce both anthocyanidin-diglucosides and -monoglucosides, and their biosynthesis is closely dependent on cropping years.

In this paper, we first define the concepts of r-fuzzy soft α-open (semi-open and δ-open) sets on fuzzy soft topological spaces based on the article Aygunoglu et al. (Hacet. J. Math. Stat., 43 (2014), 193-208), and the relations of these sets with each other are established. In addition, we introduce the concepts of fuzzy soft δ-closure (δ-interior) operators, and study some properties of them. Also, the concept of r-fuzzy soft δ-connected sets is introduced and studied with help of fuzzy soft δ-closure operators. Thereafter, we define the concepts of fuzzy soft α-continuous (β-continuous, semi-continuous, pre-continuous and δ-continuous) functions, which are weaker forms of fuzzy soft continuity, and some properties of these functions along with their mutual relationships are discussed. Moreover, a decomposition of fuzzy soft α-continuity and a decomposition of fuzzy soft semi-continuity is obtained. Finally, as a weaker form of a fuzzy soft continuity, the concepts of fuzzy soft almost (weakly) continuous functions are defined, and some properties are specified. Additionally, we explore the notion of continuity in a very general setting called, fuzzy soft (L, M, N, O)-continuous functions and a historical justification is introduced.

Reflection on the training needed by Panamanian teachers has little research tradition, although recently, training programs have been developed for teachers to teach mathematics in accordance with current trends in the teaching of this subject. This article explains one of these postgraduate training programs. Specifically, the guidelines for its design and some results of its second implementation are discussed. Among the most important results for this article we have a) the creation of the platform as well as the set of assignments designed, which have been used for the training of subsequent promotions of teachers; b) It highlights the change in the criteria that guide the teacher's practice at the end of the program, in relation to the criteria used before the training, particularly emphasizing the relevance acquired by the emotional aspects and those related to interaction in this process.

Ureaplasma species (Ureaplasma spp.) are commonly found as commensals in the human urogenital tracts , but their overgrowth can lead to infection in the urogenital tract and at distal sites. Treatment of Ureaplasma spp. infections is difficult. The lack of a cell wall confers resistance to all β-lactam and glycopeptide antibiotics whereas the lack of de novo synthesis of folic acid makes them resistant to sulfonamides and diaminopyrimidines. Thus, there is a need to search for new drugs effective against these bacteria. In the presented studies, the effect of N,N-diethyldithiocarbamate (DDC) at a concentration of 2 µg/ml, 20 µg/ml and 200 µg/ml on the growth and survival of Ureaplasma urealyticum and Ureaplasma parvum was tested. Our results indicated that all DDC concentrations used showed both bacteriostatic and bactericidal activity against both tested strains In brief, for the first time we showed the bacteriostatic and bactericidal activity of DDC against Ureplasma urealyticum and Ureaplasma parvum. Based on literature data, we conclude that this DDC activity is related to the inhibition of urease activity, which is an indispensable enzyme for these bacteria. Further research is needed and the results obtained in the present study should be verified in in vivo models of infection.

Substituted bis(iminophosphoranyl)methanes are CH acidic compounds that can form complexes with formally dianionic central carbon centres. The reaction of H₂C(Ph₂P=NDip)₂ (≡ H₂L), Dip = 2,6-diisopropylphenyl, with one equivalent of di-n-butylmagnesium afforded the methanide complex [HLMgnBu] 1. Treatment of complex 1 with phenylsilane in aromatic solvents at elevated temperatures afforded the methanediide complex [(LMg)₂] 2 presumably via the MgH intermediate [(HLMgH)_n] (n = 1 or 2). The reaction of 1 with LiAlH₄ in diethyl ether yielded the AlH complex [HLAlH₂] 3. Alternatively, this complex was also obtained from the reaction of H₂L with AlH₃∙NMe₃. The molecular structures of [HLMgnBu] 1, [(LMg)₂] 2, and [HLAlH₂] 3 are reported. Complex 3 shows no sign of H₂ elimination to a methanediide species at elevated temperatures in contrast to the facile elimination of the putative reaction intermediate [(HLMgH)_n] (n = 1 or 2) to form [(LMg)₂] 2. The chemical properties of complex 2 were investigated and this complex appears to be stable against coordination with strong donor molecules.

We assume that the current mathematical knowledge K is a finite set of statements from both formal and constructive mathematics, which is time-dependent and publicly available. Any theorem of any mathematician from past or present belongs to K. The set K exists only theoretically. Ignoring K and its subsets, sets exist formally in ZFC theory although their properties can be time-dependent (when they depend on K) or informal. In every branch of mathematics, the set of all knowable truths is the set of all theorems. This set exists independently of K. Algorithms always terminate. We explain the distinction between algorithms whose existence is provable in ZFC and constructively defined algorithms which are currently known. By using this distinction, we obtain non-trivial statements on decidable sets X⊆N that belong to constructive and informal mathematics and refer to the current mathematical knowledge on X. This and the next sentence justify the article title. For any empirical science, we can identify the current knowledge with that science because truths from the empirical sciences are not necessary truths but working models of truth from a particular context. The feature of mathematics from the article title is not quite new. Church's thesis, which is known from the beginning of computability theory, is based on the observation that the currently known computable functions are recursive, where the notion of a computable function is informal. It proves that the predicate of the current mathematical knowledge slightly increases the intuitive mathematics. For a set X⊆N whose infiniteness is false or unproven, we define which elements of X are classified as known. No known set X⊆N satisfies Conditions (1)-(4) and is widely known in number theory or naturally defined, where this term has only informal meaning. (1) A known algorithm with no input returns an integer n satisfying card(X)<ω ⇒ X⊆(-∞,n]. (2) A known algorithm for every k∈N decides whether or not k∈X. (3) No known algorithm with no input returns the logical value of the statement card(X)=ω. (4) There are many elements of X and it is conjectured, though so far unproven, that X is infinite. (5) X is naturally defined. The infiniteness of X is false or unproven. X has the simplest definition among known sets Y⊆N with the same set of known elements. We prove that the set X={n∈N: the interval [-1,n] contains more than 29.5+(11!/(3n+1))∙sin(n) primes of the form k!+1} satisfies Conditions (1)-(5) except the requirement that X is naturally defined. 501893∈X. Condition (1) holds with n=501893. card(X∩[0,501893])=159827. X∩[501894,∞)={n∈N: the interval [-1,n] contains at least 30 primes of the form k!+1}. If we add to X some set W satisfying 14≤card(W)≤23, then the following statements hold: X does not satisfy Condition (1), 159827+14≤card(X), the above lower bound is currently the best known, card(X)<ω ⇒ card(X)≤159827+23, the above upper bound is currently the best known, X satisfies Conditions (2)-(5) except the requirement that X is naturally defined. Analogical statements hold, if we add to X the set ⋃_{x∈N, x divides 99!} {k∈N: k-501894 is the x-th element of P(n^2+1)}, where P(n^2+1) denote the set of primes of the form n^2+1. For a non-negative integer n, let θ(n) denote the largest integer divisor of 10^{10^{10}} smaller than n. Let κ:N→N be defined by setting κ(n) to be the exponent of 2 in the prime factorization of n+1. The set X={n∈N: (θ(n)+κ(n))^2+1 is prime} satisfies Conditions (1)-(5) except the requirement that X is naturally defined. Condition (1) holds with n=0^{10^{10}}. We present a table that shows satisfiable conjunctions of the form #(Condition1)∧ (Condition 2)∧#(Condition 3)∧(Condition 4)∧#(Condition 5), where # denotes the negation ¬ or the absence of any symbol. No set X⊆N will satisfy Conditions (1)-(4) forever, if for every algorithm with no input, at some future day, a computer will be able to execute this algorithm in 1 second or less. The physical limits of computation disprove this assumption.

Studies carried out have revealed that every day around three thousand and twelve people lose their lives in the world due to traffic accidents and poor air quality. Large cities, with their millions of inhabitants and vehicles, face many problems relating to vehicular traffic. In 2015 the speed limit was modified on several roads in the city of São Paulo-Brazil. However, in 2017 the speed limits were increased again, but not on all previous routes. This study analyzed the impact of this change on the number of accidents and pollutant concentrations, over a period of ten years, comparing the periods before and after the implementation of the measure, using real data collected and provided by the authorities of the city and the state transit and environmental companies, on more than forty routes and two nearby air quality stations. The results show a clear reduction in the number of accidents without victims on the roads of the city of São Paulo starting in 2010. However, the restrictive measures imposed by government officials may have contributed to the decrease in the number of accidents, but the number of fatalities has not changed much. Air pollution has not improved substantially with speed changes, as new speed increases have been linked to new episodes of congestion. The average number of fatalities due to accidents has been increasing since 2010 and accidents are becoming more serious. The application of a general linear statistical model (GLM) estimated the impact of the speed reduction policy in terms of the number of injuries avoided per month: 43.4 and 14.1 on other roads and on Pinheiros marginal, respectively. The results highlight the need for a constant data collection by the authorities in cities with high vehicle traffic. The important temporal time trend in terms of reduction of injuries but not in terms of fatalities and air quality, shows the need to apply joint public policies, not only speed reduction, but also the use of new technologies and raising drivers’ awareness of the problem.

The Shimensi super-large tungsten polymetallic deposit is located in Late Jurassic- Early Cretaceous Porphyry-Skarn tungsten ore belt in the south Yangtze metallogenic belt. There are 3 types of mineralization: veinlet-disseminated type, thick quartze vein type and hydrothermal crypto-explosive breccia type. Based on geological studies, this paper presents new petrographic, microthermometric, laser Raman spectroscopic and hydrogen and oxygen isotope research of the fluid inclusions from the deposit. The results show that there are five different types of fluid inclusions: liquid-rich inclusions, vapor-rich inclusions, pure liquid inclusions, pure vapor inclusions, and fluid inclusions containing a solid crystal. The homogenization temperatures of the fluid inclusion range from 140℃-270℃, the salinities are 3%-5% NaCleq and the densities of ore-forming fluid range from 0.64 g/cm3 to 0.99 g/cm3. For the analyses of Laser Raman spectroscopic, the ore-forming fluids can be approximated by a Ca2+-Na+-SO42--Cl- fluid system with small amount of CO2, CH4 and N2. Otherwise, the datas of the pressure, pH and Eh show a fluid metallogenic environment of low pressure, weak acid and weak reduction. The values of the homogenization temperature in 3 types of orebodies suggest that the mineralization is characterized by the decrease of the temperature under the condition of the fluid immiscibility. The H-O isotope values are interpreted to indicate that the ore-forming fluids are mainly composed of magmatic water, and also the meteoric water was added with the process of the magma rising.

Metabolomics profiling for accurate and reliable quantification of organic acids that carry a carboxylic acid functional group in complex biological samples, remains a major analytical challenge in clinical chemistry research. Several procedural barriers associated with quantification of clinically important carboxylic containing metabolites (CCMs) including spontaneous decarboxylation during ionization, poor chromatographic resolution, and retention on a reverse-phase column, limit the sensitivity, specificity, and reproducibility of multiple-reaction monitoring (MRM) based LC-MS assay development. We report a targeted metabolomics-based analytical method for the quantification of CCMs using phenylenediamine derivatization. Accurate and sensitive quantification of CCMs is successfully demonstrated in an array of biological matrices. Recovery of metabolites from different matrices (plasma, serum, urine, saliva, tissues, and cell extracts), ranged from 90% to 105%, with all the CVs ≤ 10%. The method showed linearity over a broad dynamic range from 0.1 ng/mL to 10 µg/mL with linear regression coefficients of 0.99 for most of the metabolites tested herein, that covers broad-based applicability with the analysis of biological samples. In most cases the LODs were as low as 0.01 ng/mL. The phenylenediamine-based derivatization of carboxyl acid library consisting of more than 70 endogenous metabolites was constructed for metabolite identification, which spanned more than 40 biological pathways. The library included a wide-variety of structurally variant CCMs such as amino acids/conjugates, short to medium chain organic acids, di/tri-carboxylic acids/conjugates, fatty acids and some ring-containing CCMs. We compared the CCMs profiles of pancreatic cancer cells with normal pancreatic epithelial cells to test and validate the biological utility of this method. The comparative profiling between cancerous and normal cells resulted in the identification of potential biomarkers in pancreatic cancer, and their correlation with several key metabolic pathways such as central carbon energy metabolism, protein metabolism, including TCA cycle, glycolysis, Gln-Glu pathway, and biosynthesis of amino acids and unsaturated fatty acids was established. The method, described herein, for the first time enables the sensitive and highly specific quantification of CCMs on small sample size with high reproducibility in a high throughput manner. Given the biological and functional significance of this class of metabolites, this mass spectrometry based targeted quantitative assay, fills an important gap and is likely to support a wide range of applications for basic, clinical, and translational research.

This work reports the isolation, purification, and anti-inflammatory evaluation of compounds from the plant species Ageratina pichinchesis. Using open-column chromatography, 11 known compounds were purified, whose chemical structures were elucidated by nuclear magnetic resonance techniques (1D and 2D). All compounds were evaluated in the in vitro model of RAW 264.7 mouse macrophage cells measuring nitric oxide inhibition as a determination of the anti-inflammatory effect. Outstandingly, the compound betuletol 3-O-β-glucoside (11) exhibited inhibition of nitric oxide with an IC50 of 75.08 ± 3.07% at 75 µM, additionally, it inhibited the secretion of interleukin 6 (IL-6) and activation of nuclear factor (NF-kβ). These results show that compound 11 could be considered as a potential anti-inflammatory agent in suppressing the expression of NF-kβ target genes such as the proinflammatory pathway and inducible nitric oxide synthase (iNOS). Consequently, the medicinal use attributed in traditional medicine to the A. pichinchensis species is due to the diversity of compounds that the plant biosynthesizes, demonstrating that its effect relates to anti-inflammatory effects associated with compound 11.

Chemical substances such us CS-gas used in military operations are chemical compounds that present a series of peculiarities that affect the ecosystem by disrupting the ecological balance. This study evaluated the toxicological character of O-chlorobenzylidenemalonitrile (CBM), (substance present in CS-gas) on the algae Cholrella sp. and analyzed the toxicity limit and the response of the microorganism to the oxidative stress caused by this substance. In order to under-stand the toxicological mechanisms of CBM on algal culture, a series of parameters were analyzed such as: the cell growth curve, the average specific growth rate (µ), percent inhibition in yield(I%), dry cell weight (DCW), percent viability and productivity of algal biomass flocculation activity(FA), change in oxygen production. The content of chlorophyll pigments, was characterized by Fourier transform infrared spectroscopy (FTIR) fluorescence spectroscopy and analysis of the surface structure of algal cells by SEM spectroscopy. This study aims to provide fundamental data for understanding the toxicity of CBM to aquatic organisms and provides a basis for assessing the potential for impact on aquatic ecosystems. The results obtained could be taken into account in the management of the decontamination of the affected areas.

The use of bacteriophage is reemerging as a tool for combatting multi-drug resistant bacterial infections. In our previous study, we showed that colistin resistant carbapenem-resistant Klebsiella pneumoniae (ColR-CRKP) is more susceptible to killing by lytic tailed phages, including ФNJS1 specific for nonmucoid K. pneumoniae. Although we demonstrated that alteration on surface charges of ColR-CRKP promotes phage adherence and infection, the receptor for ФNJS1 was still unknown. In current study, we identified O-antigen was involved in the reversible adsorption, and outer membrane protein (OMP) FepA may be served as one of the irreversible receptors for ФNJS1. We firstly found accelerated reversible phage adsorption to ColR-CRKP cells, and that periodate treatment of bacteria inhibited the phage binding, indicating LPS may be involved in phage reversible adsorption. ФNJS1-resistant bacterial mutants screening revealed that mutants in ∆wecG(mTn5) and ∆wecA(mTn5), two genes responsible for LPS biosynthesis, affected phage adsorption capacity and phage infectivity. The loss of wzyE encoding O-antigen polymerase showed no significant difference in phage adsorption but increased phage infectivity, suggesting the long chain length of O-antigen may also be a barrier for bacteriophage infection. Among four OMP mutants including ∆fepA, ∆fhuA, ∆ompA and ∆ompC, only ∆fepA slowed phage lysis rate, suggesting FepA may be as one of irreversible receptors for ФNJS1. The results are helpful to better understand why ColR-CRKP sensitizes phage infection and to combat multi-drug resistant K. pneumoniae infections in the future.

Deep ultraviolet (DUV) light emitting diode (LED) at emission wavelength of 254 nm is inevitable to replace the conventional toxic mercury UV Lamp as demanded by Minamata Convention of 2020. Both the conventional DUV LEDs (C-LED) and tunnel junction (TJ)-based UVC LEDs are suffering from high operating voltages, low hole injection efficiency and efficiency droops. Therefore, p-AlGaN and n-AlGaN layers-based TJ is one of the most promising parts of optical devices and has been widely utilized as carrier tunneling in DUV LEDs to mitigate both the contact resistance for Ohmic contact and low hole injection efficicny at 254 nm emission. Here an approach is presented to electrically manipulate the quantum tunneling probability by exploiting the transported carriers at the interface of n-AlGaN/p-AlGaN TJ with moderate Si and Mg-doping levels and optimized thickness. As a result, the Augur recomination rate was sucesfully suppressed and quite high radiative recombination rates were achived in the 254nm TJ-based DUV LEDs, which is attributed the improved holes injection toward the MQWs when compared to C-LED. The internal-quantum efficiency (IQE) of approximately ~ 88% in the TJ-based LED with zero efficiency droop is achived, which is 1.3 times greater than the IQE of approximately ~ 66% in the C-LED with efficiency droop of 53%. Based on our known knowledge, this is the highest reported IQE (88%) at emission wavelength of 254 nm in the AlGaN TJ-based LED with efficiency droop of 0%. It was found that the light output powers (LOP) of TJ-LED increases linearly under the varying current density, whereas in the case of C-LED the LOP changes nonlinearly under varying current density. This is attributed to the lower Augure recombination rate in the MQWs of TJ-based DUV LED. The operating voltages were remarkable reduced from 20 V to 5.4 V under 200 mA operation, which is attributed to the thickness and doping optimization in TJ and better selection of realively lower Al-content in the contact-layer. The demonstrated TJ-based DUV LEDs opens the door to epitaxial growth of high-performance UV emitters in MOCVD and MBE for a plethora of biomedical applications.

The results show that seven types of N-nitrosamines: N-nitrosodiethylamine (NDEA), N-Nitrosopiperidine (NPIP), N-nitrosodimethylamine (NDMA), N-nitrosopyrrolidine (NPYR), N-nitrosodipropylamine (NDPA), N-nitrosodibutylamine (NDBA) and N-nitrosodiphenylamine (NDphA) were reduced after heat treatment of pork steaks marinated with L. plantarum MI-LP1, S. carnosus LM-SC1, S. vitulinus LM-SV1. Selected LAB suppressed the formation of putrescine and spermine, lowered acid and peroxide values, which were significantly lower than in the control samples, then P≤0.05 in all cases. The nitrites and nitrates amounts were significantly decreased in pork steaks samples marinated with L. plantarum MI-LP1 and S. carnosus MI-SV1 strains. These results presented that selected lactic acid bacteria could be used for marinating pork steaks to improve quality characteristics and reduce N-nitrosamine formation during grilling.

A highly-integrated experimental system for plasma decomposition of fuels was built. Experiments were conducted and confirmed that macromolecular chain hydrocarbons were cracked by large-gap dielectric barrier discharge under the excitation of a microsecond-pulse power supply. Alkanes and olefins with a C atom number smaller than 10 as well as hydrogen were found in the cracked products of n-decane (n-C10H22). The combination of preheating and plasma decomposition had strong selectivity for olefins. Under strong discharge conditions, micromolecular olefins were found in the products. Moreover, there was a general tendency that micromolecular olefins gradually accounted for higher percentage of products at higher temperature and discharge frequency.

The present paper contains data on the density (ρ), sound velocity (u), specific heat capacity (c_p ) of the mixture of N,N-dimethylformamide + 1-butanol (DMF + BuOH) determined in the entire concentration range of solution and in the temperature range: (293.15–318.15) K. The analysis of thermodynamic functions such as isobaric molar expansion, isentropic and isothermal molar compression, isobaric and isochoric molar heat capacity, as well as their excess functions (〖 E〗_(p,m)^E,〖 K〗_(S,m)^E,〖 K〗_(T,m)^E,〖 C〗_"p,m" ^E,〖 C〗_"V,m" ^E) and also V_m^E was undertaken. The analysis of changes in the physicochemical quantities was based on consideration of the system in an aspect of intermolecular interactions with resulting changes in the mixture structure. The results available in the literature are confusing during the analysis and became the reason for our decision to thoroughly examine the system. What is more, for a system whose components are widely used, there is no information in the literature regarding the heat capacity of the tested mixture, which was also achieved and presented in this publication. The conclusions drawn from so many data allow us to approximate and understand the changes that occur in the structure of the system due to repeatability and consistency of the obtained results

Optimizing the nitrogen (N) timings and rate can improve nutrient uptake, and nutrient-efficiencies, especially of N in wheat under the changing climate scenario. Climatic stress in the form of high temperature and drought resulted in the decreased crop physiology and, ultimately, grain yield. Taking the example of rainfed wheat, we quantified the impact of N application rates as full and split-dose at three variable sites of rainfed Pothwar, Pakistan by conducting field experiments for two years (2013-14 and 201-15). Treatments include, T1 = Control (No fertilizer applied), full dose of N applied at the time of crop sowing, i.e. T2 = 50 kg N ha^-1, T3 = 100 kg N ha^-1 and T4 = 150 kg N ha^-1 and split application of N at different timings during different stages of the crop called as split application of N, i.e. T5: Application of 50 kg N ha^-1 (15 kg N ha^-1 (Sowing) : 20 kg N ha^-1 (Tillering) :15 kg N ha^-1 (Anthesis), T6: Application of 100 kg N ha^-1 (30 kg N ha^-1 (Sowing): 40 kg N ha^-1 (Tillering) : 30 kg N ha^-1 (Anthesis) and T7: Application of 150 kg N ha^-1(45 kg N ha^-1 (Sowing) : 60 kg N ha^-1 (Tillering) : 45 kg N ha^-1 (Anthesis). Three study sites include viz. Islamabad (High rainfall with optimum temperature), University Research Farm (URF)-Koont (Medium rainfall with moderate temperature), and Talagang (low rainfall with high temperature). Results showed that the highest stomatal conductance (0.80 mole m^-2 sec^-1), net photosynthetic rate (20.07 μmole m^-2s^-1), transpiration rate (9.58 mmole m^-2s^-1), intercellular CO2 concentration (329.25 μmole CO₂ mol^-1 air), SPAD values (58.86 %) and proline contents (35.42 μg g^-1) were obtained for split application of N (T6 = Split N100) compared to control and full dose of N treatments. Among sites, these physiological traits remained highest at Islamabad and lowest at Talagang, while among years, maximum values of the measured parameters were obtained in 2013-14. A similar trend was observed for crop total N, N efficiencies, and agronomic traits of the crop. Our results suggest that optimum N application rate and its suitable timings can help to harvest real benefits of N as in our findings, split dose resulted in the maximum performance of the crop from physiological parameters to the agronomic traits of the rainfed wheat crop.

Optimizing the nitrogen (N) timings and rate can improve nutrient uptake, and nutrient-efficiencies, especially of N in wheat under the changing climate scenario. Climatic stress in the form of high temperature and drought resulted in the decreased crop physiology and, ultimately, grain yield. Taking the example of rainfed wheat, we quantified the impact of N application rates as full and split-dose at three variable sites of rainfed Pothwar, Pakistan by conducting field experiments for two years (2013-14 and 201-15). Treatments include, T₁ = Control (No fertilizer applied), full dose of N applied at the time of crop sowing, i.e. T₂ = 50 kg N ha^-1, T₃ = 100 kg N ha^-1 and T₄ = 150 kg N ha^-1 and split application of N at different timings during different stages of the crop called as split application of N, i.e. T₅: Application of 50 kg N ha^-1 (15 kg N ha^-1 (Sowing) : 20 kg N ha^-1 (Tillering) :15 kg N ha^-1 (Anthesis), T₆: Application of 100 kg N ha^-1 (30 kg N ha^-1 (Sowing): 40 kg N ha^-1 (Tillering) : 30 kg N ha^-1 (Anthesis) and T₇: Application of 150 kg N ha^-1(45 kg N ha^-1 (Sowing) : 60 kg N ha^-1 (Tillering) : 45 kg N ha^-1 (Anthesis). Three study sites include viz. Islamabad (High rainfall with optimum temperature), University Research Farm (URF)-Koont (Medium rainfall with moderate temperature), and Talagang (low rainfall with high temperature). Results showed that the highest stomatal conductance (0.80 mole m^-2 sec^-1), net photosynthetic rate (20.07 μmole m^-2s^-1), transpiration rate (9.58 mmole m^-2s^-1), intercellular CO₂ concentration (329.25 μmole CO₂ mol^-1 air), SPAD values (58.86 %) and proline contents (35.42 μg g^-1) were obtained for split application of N (T₆ = Split N₁₀₀) compared to control and full dose of N treatments. Among sites, these physiological traits remained highest at Islamabad and lowest at Talagang, while among years, maximum values of the measured parameters were obtained in 2013-14. A similar trend was observed for crop total N, N efficiencies, and agronomic traits of the crop. Our results suggest that optimum N application rate and its suitable timings can help to harvest real benefits of N as in our findings, split dose resulted in the maximum performance of the crop from physiological parameters to the agronomic traits of the rainfed wheat crop.

The quinoline derivative, N-(7-chloro-4-morpholinoquinolin-2-yl)benzamide, was synthesized in a conventional three-step procedure from 4,7-dichloroquinoline using N-oxidation reaction/C2-amidation reaction/C4 SNAr reaction sequence. The structure of the compound was fully characterized by FT-IR, 1H‐, 13C-NMR, DEPT-135°, and ESI-MS techniques. Its physicochemical parameters (Lipinski’s descriptors) were also calculated using the online SwissADME database. Such derivatives are relevant therapeutic agents exhibiting potent anticancer, antibacterial, antifungal, and antiparasitic properties.

This paper focuses on examining a new type of n-additive maps called the symmetric reverse n-derivations. As implied by its name, it combines the ideas of n-additive maps and reverse derivations, with a 1-reverse derivation being the ordinary reverse derivation. We explore several findings that expand our knowledge of these maps, particularly their presence in semiprime rings and the way rings respond to specific functional identities involving elements of ideals. Also, we provide examples to help clarify the concept of symmetric reverse n-derivations. This study aims to deepen the understanding of these symmetric maps and their properties within mathematical structures.

This paper focuses on examining a new type of $n$-additive maps called the symmetric reverse $n$-derivations. As implied by its name, it combines the ideas of $n$-additive maps and reverse derivations, with a $1$-reverse derivation being the ordinary reverse derivation. We explore several findings that expand our knowledge of these maps, particularly their presence in semiprime rings and the way rings respond to specific functional identities involving elements of ideals. Also, we provide examples to help clarify the concept of symmetric reverse $n$-derivations. This study aims to deepen the understanding of these symmetric maps and their properties within mathematical structures.

In the framework of fully vertical GaN-on-Silicon device technology development, we report on the optimization of non-alloyed ohmic contacts on the N-polar n+ doped GaN face backside layer. This evaluation is made possible by using patterned TLMs (Transmission Line Model) through direct laser writing lithography after locally removing the substrate and buffer layers in order to access the n+ doped backside layer. As deposited non-alloyed metal stack on top of N-polar orientation GaN layer after buffer layers removal results in poor ohmic contact quality. To significantly reduce the related contact resistances, an HCl treatment is applied prior to metallization under various time and temperature conditions. A 3-minutes HCl treatment at 70°C is found to be the optimum condition to achieve thermally stable high ohmic contact quality. To further understand the impact of the wet treatment, SEM (Scanning Electron Microscopy) and XPS (X-ray Photoelectron Spectroscopy) analysis were performed. XPS revealed a decrease in Ga-O concentration after applying the treatment, reflecting the higher oxidation susceptibility of the N-polar face compared to the Ga-polar face, which was used as a reference. SEM images of the treated samples show the formation of pyramids on the N-face after HCl treatment, suggesting specific wet etching planes of the GaN crystal from the N-face. The size of the pyramids is time-dependent; thus, increasing the treatment duration results in larger pyramids, explaining the degradation of ohmic contact quality after prolonged high temperature HCl treatment.

Let $n \geq 2$ be a fixed integer and $\mathcal{A}$ be a $C^*$-algebra. A permuting $ n $-linear map $ \mathcal{G} : \mathcal{A} ^{n} \rightarrow \mathcal{A} $ is known to be symmetric generalized $n$-derivation if there exists a symmetric $n$-derivation $ \mathfrak{D} : \mathcal{A} ^{n} \rightarrow \mathcal{A} $ such that $ \mathcal{G} \left(x_{1}, x_{2}, \ldots, x_{i} x_{i}^{\prime}, \ldots, x_{n}\right)= \mathcal{G} \left(x_{1}, x_{2}, \ldots, x_{i}, \ldots, x_{n}\right) x_{i}^{\prime}+x_{i} \mathfrak{D} (x_{1}, x_{2},\ldots, x_{i}^{\prime}, \ldots, x_{n})$ holds for all $x_{i}, x_{i}^{\prime} \in \mathcal{A} $. In this paper, we investigate the structure of $C^*$-algebras involving generalized linear $n$-derivations. Moreover, we describe the forms of traces of linear $n$-derivations satisfying certain functional identity.

In the present study we tested the effect of small molecular weight redox molecules on collagen-induced platelet aggregation. We used N-acetylcysteine amide (AD4), the amide form of N-acetylcysteine (NAC), a thiol antioxidant with improved lipophilicity and bio-availability compared to NAC, and the thioredoxin mimetics (TXM) peptides, TXM-CB3, TXM-CB13, and TXM-CB30. All compounds significantly inhibited platelet aggregation induced by collagen, with TXM-peptides and AD4 being more effective than NAC. The levels of TxB2 and 12-HETE, the main metabolites derived from the cyclooxygenase and lipoxygenase pathways following platelet activation, were significantly reduced in the presence of AD4, TXM-peptides, or NAC, when tested at the highest concentration (0.6 mM). The effect of AD4, TXM-peptides, and NAC was tested also on the clotting time (CT) of whole blood. TXM-CB3 and TXM-CB30 showed the highest increase of CT. Furthermore, two representative compounds, TXM-CB3, and NAC, showed an increase in the an-ti-oxidant free sulfhydryl groups of plasma detected by Ellman’s method, suggesting a contribution of plasma factors to the antiaggregating effects. Our results suggest that these small molecular weight redox peptides might become useful for the prevention and/or treatment of oxidative stress conditions associated with platelet activation.

Biochar application to the soil can improve soil quality and nutrient leaching loss. Recent studies have reported that surficial application of biochar to stored swine manure can reduce emissions of odorous compounds and reduce the volatilization loss of ammonia. Our working hypothesis was that the biochar-treated manure application to the soil would decrease nutrient leaching from manure and increase plant-available nutrients. The study objectives were to evaluate the impact of biochar-treated swine manure on soil total C, N, and other major and minor nutrients. Three biochars (i) neutral pH red-oak (RO), (ii) highly alkaline autothermal corn (Zea mays) stover (HAP), and (iii) mild acidic Fe-treated autothermal corn stover (HAPE) were incubated with swine manure for a month. The biochar-manure mixture was applied in triplicate to soil columns with application rate determined by the P₂O₅-P content in manure or manure-biochar mixtures after the incubation. The ammonium (NH₄⁺), nitrate (NO₃^-), and reactive P concentrations in soil column leachates were recorded for eight leaching events. Soil properties and plant-available nutrients were compared between treatments and control manure & soil. Manure-(HAP&HAPE) biochar treatments significantly increased soil organic matter (OM) and increased soil total C, N, and improved soil bulk density. Concentrations of KCl-extractable NH₄⁺ and NO₃^- significantly increased in HAPE column leachates during this 4-week study and in the soil after the experiment. A significant reduction in soil Mehlich3 Cu was also observed for the manure-HAPE mixture compared with the control. Overall, the manure-biochar incubation enabled biochar to sorb nutrients from manure, and the subsequent manure-biochar mixture application to soil improved soil quality and plant nutrient availability in comparison to conventional manure application to soil. This proof-of-the-concept study suggests that biochars could be used to solve both environmental and agronomic challenges and further improve the sustainability of animal and crop production agriculture.

Recently, many authors have been interested to introduce fuzzy implications over t-norms and t-conorms. In this paper, we introduce (S,N) and residuum fuzzy implication for Dubois t-norm and Hamacher's t-norm. Also, new concepts so-called (T,N) and residual fuzzy co-implication in dual Heyting Algebra are investigated. Some examples as well as application are discussed as well.

The escalating issue of phenol dye-containing wastewater necessitates the development of efficient and sustainable treatment methods. In this context, we present a novel composite photocatalyst comprising ZnFe2O4 (ZFO) nanoparticles supported on nanocellulose(NC), aimed at addressing this environmental challenge. The synthesis involved a facile hydrothermal method followed by impregnation of ZFO nanoparticles onto the NC matrix. ZFO, as a weakly magnetic semiconductor catalytic material, was utilized in photocatalytic experiments under magnetic field conditions. By controlling the electron spin states through the magnetic field, electron-hole recombination was suppressed, resulting in improved photocatalytic performance.The resultant composite exhibited remarkable photocatalytic activity under visible light irradiation, owing to the synergistic effect between ZFO nanoparticles and NC. Through systematic evaluation, we demonstrated the high efficiency and stability of the composite photocatalyst in degrading phenol dye pollutants in aqueous solutions. Furthermore, the composite material exhibited promising recyclability, retaining its activity even after multiple usage cycles. This study underscores the potential of the ZFO/NC composite for sustainable wastewater treatment, offering a promising avenue for environmental remediation.

In recent years, 360o videos have gained the attention of researchers investigating their educational potential. Given the ongoing debate about their impact on learning, particularly with young students where existing research is minimal, a comprehensive study was conducted to evaluate their effectiveness relative to other media forms. The study involved 44 kindergarten students learning about wild animals over nine sessions. The 360o videos were compared to printed materials and conventional videos to measure knowledge acquisition, motivation, enjoyment/positive feelings, immersion, and ease of use. The findings suggest that, compared to printed materials, 360o videos enhance knowledge acquisition. However, this advantage does not extend to comparisons with conventional videos. Similarly, while enjoyment and motivation were higher for 360o videos compared to printed materials, they did not surpass those associated with conventional videos. Despite their potential, 360o videos were deemed the least easy to use, likely due to the employment of low-cost HMDs. Immersion emerged as the only factor where 360o videos excelled, demonstrating a notable influence on learning outcomes. The implications of the study are also discussed.

Presence of lipopolysaccharides (LPSs) in the outer layer of outer membranes (OMs) is an almost universal molecular signature of Gram-negative bacteria. The O-antigen or O-polysaccharide (OPS) chains attach to millions of LPS molecule to form a continuous layer on the surface of most of Escherichia coli strains. OPS structure is one of the most variable features of bacteria, with about 200 E. coli O-serotypes currently described. In this review a analyze accumulating evidence suggesting that a vast majority of these OPS types provide robust shields that restrict the access of large molecules to the OM surface. Sophisticated mechanisms employed by bacteriophages to penetrate the OPS barrier are also considered. These are initiated with specific recognition of OPS molecules by phage receptor-binding proteins (RBP), or of other cell-surface molecules that are exposed above the OPS layer. Only after can virions gain access to secondary receptors found closer to the OM surface. The mechanisms of breaking through OPS in most if not all cases appear to rely on mechanical force generated by molecular motors of processive depolymerization or deacetylation of cell surface polysaccharides by enzymatically active RBPs, or by internal rearrangement of the virion.

It was the aim of this study to compare the ratio of salbutamol and its major metabolite salbutamol-4’-O-sulfate as well as the quantity excreted renally after oral and inhalative administration. Additionally, the excretion pattern after application of racemic salbutamol opposed to the pure enantiomer levosalbutamol was evaluated. For quantitation of the sulfonated metabolite of salbutamol, reference material was synthesized and characterized by NMR and HRMS. Urine samples were analyzed by ultrahigh performance liquid chromatography-tandem mass spectrometry (UHPLC-MS/MS). Salbutamol is mainly metabolized by sulfotransferase 1A3 (SULT1A3), which is most abundantly found in the jejunum. A high first pass effect occurs upon oral administration, which leads to a higher amount of salbutamol-4’-O-sulfate in urine compared to unchanged salbutamol excreted within the first hour post administration. Thus, when administered orally, the proportion of metabolite to total salbutamol was higher than for inhalative administration in the early urinary excretion. Levosalbutamol is the favored enantiomer of SULT1A3 and therefore metabolized at a higher rate whereas racemic salbutamol shows a reduced proportion between metabolite and parent compound. The amount of sulfoconjugate was found higher than that of the parent compound for all urine samples except for those excreted in the first hour after inhalative administration.

Although RNA modifications were discovered decades ago, the identification of enzymes that write, read, and erase RNA modifications enabled their functional study and spawned the field of epitranscriptomics. Coupling that knowledge to new methods has enabled the precise pinpointing of epitranscriptomic modifications across the transcriptome plus the elucidation of their functional consequences. PCIF1 (Phosphorylated CTD Interacting Factor 1) was shown to add N6, 2’-O-dimethyladenosine (m⁶Am) marks at the first nucleotide after the 5’ N7-methylguanosine (m⁷G) cap. In this review, we discuss the epitranscriptomic regulation of mRNA in general, and focus on m⁷G cap-adjacent m⁶Am in particular. m⁶Am positions can now be distinguished from N6-methyladenosine (m⁶A) using new techniques leveraging PCIF1-knockout cells. Although m⁶Am modification sites can be detected precisely, conflicting data have been published regarding how cap-adjacent m⁶Am marks affect their host mRNA. Discrepancies in the data mean that the effects of cap-adjacent m⁶Am on mRNA stability, decapping, and translation continue to be debated. Finally, while PCIF1 is predominantly nuclear, a subset of results suggest a possible cytoplasmic role as well. Taken together, these contradictory results which employed different methodologies and cell lines means that further experiments are required to determine the ultimate biological function(s) of m⁷G cap-adjacent m⁶Am.

The Koka gold deposit is located in the Elababu shear zone between the Nakfa terrane and the Adobha Abiy terrane, NW Eritrea. Based on the paragenetic study two main stages of gold mineralization were identified in the Koka gold deposit: 1) an early stage of pyrite-chalcopyrite-sphalerite-galena-gold-quartz vein; and 2) a second stage of pyrite-quartz veins. NaCl-aqueous inclusions, CO2-rich inclusions, and three-phase CO₂-H₂O inclusions occur in the quartz veins at Koka. The ore-bearing quartz veins formed at 268℃, from NaCl-CO₂-H₂O(-CH₄) fluids averaging 5 wt% NaCl eq. The ore-forming mechanisms include fluid immiscibility during stage I, and mixing with meteoric water during stage II. Oxygen, hydrogen and carbon isotopes suggest that the ore-forming fluids originated as mixtures of metamorphic water, meteoric water and magmatic water, whereas sulfur isotope suggest an igneous origin. Features of geology and ore-forming fluid at Koka deposit are similar to those of orogenic gold deposits, suggesting the Koka deposit might be an orogenic gold deposit related to granite.

In the realm of molecular science, intricate relationships between molecular structures and their biomedical and pharmacological characteristics have been revealed through empirical experiments. This exploration hinges on the application of numerical descriptors, known as Topological Indices, which illuminate the inherent properties of diverse molecular structures. With particular significance in the medical and pharmaceutical domains, these indices facilitate the prediction of biological features for new chemical compounds and drugs by quantifying weighted entropies. In the context of this paper, we delve into the concept of graph entropy, weaving it intricately with the topological properties of the crystalline framework of the copper oxide molecule, denoted as Cu\textsubscript{2}O$[i,j,t]$. Our primary objective is to unravel the mathematical symphony underlying the structural intricacies of Cu\textsubscript{2}O$[i,j,t]$ and to imbue it with the conceptual essence of entropy. We accomplish this through the computation of entropy, leveraging various topological indices, including weight. In addition to our analytical journey, we present a graphical comparison that juxtaposes the computed indices and entropies, shedding light on the interplay between mathematical analysis and the structural elegance of Cu\textsubscript{2}O$[i,j,t]$. This endeavor contributes to a deeper understanding of the material's multifaceted applications, spanning domains from chemical sensors to solar cells, photocatalysis, and batteries, where Cu\textsubscript{2}O's crystallographic structure plays a pivotal role.

In this study, Fe, N co-doped biochar (Fe@N co-doped BC) was synthesized by carbonization-pyrolysis method and used as carbocatalysts to activate peroxymonosulfate (PMS) for sulfamethoxazole (SMX) removal. In the Fe@N co-doped BC/PMS system, the degradation rate of SMX (10.0 mg⋅L−1) was 90.2% within 40 min under optimal conditions. The radical quenching experiments, and electron spin resonance (ESR) analysis suggested that sulfate radicals (SO4•−), hydroxyl radicals (•OH) and singlet oxygen (1O2) participated in the degradation process. After the reaction, the proportion of pyrrolic N apparently decreased from 57.9% to 27.1%. Pyrrolic N served as active sites to break the inert carbon network structure and promote the generation of reactive oxygen species (ROSs). Besides, pyrrolic N showed stronger interaction with PMS and significantly reduced the activation energy required for the reaction (∆G = 23.54 kcal/mol). The utilization potentiality of Fe@N co-doped BC was systematically evaluated in terms of its reusability, and selectivity to organics. Finally, the intermediates of SMX were also detected.

Pyrazinacenes are linearly fused heteroaromatic rings, with N atoms replacing all apical CH moieties. Component rings may exist in a reduced state having NH groups instead of N, causing cross-conjugation. These compounds have interesting optical and electronic properties, including strong fluorescence in the near infrared region and photocatalytic properties, leading to diverse possible applications in bio-imaging, organic synthesis as well as obvious molecular electronic uses. In this study, we have investigated the behaviour of seven-ring pyrazinacene 2,3,11,12-tetraphenyl-7,16-dihydro-1,4,5,6,7,8,9,12,13,14,15,16,17,18-tetradecaazaheptacene (Ph4H2N14HEPT) with emphasis on protic processes including oxidation, tautomerism, deprotonation and protonation, and the species resulting from those processes. We have used computational methods to optimize the structures of the different species and generate/compare molecular orbital structures. Aromaticity of species generated by the different processes has been assessed using the nucleus independent chemical shifts, and trends in the values have been associated with the different transformations of the pyrazinacene core. The computational data was compared with experimental data obtained from synthetic samples of the molecule tBu8Ph4H2N14HEPT.

The COVID-19 pandemic has highlighted the importance and urgent need of rapid and accurate diagnostic tests for detection and screening of this infection. In our proposal, a biosensor based on the ELISA immunoassay was developed for monitoring antibodies against SARS-CoV-2 in human serum samples. The SARS-CoV-2 nucleocapsid protein (N-protein) was selected as a specific receptor for the detection of SARS-CoV-2 nucleocapsid immunoglobulin G. Thus, the N-protein was immobilized on surface of screen-printed carbon electrode (SPCE) modified with carboxylated graphene (CG). The IgG-SARS-CoV-2 nucleocapsid concentration was quantified using a secondary antibody labelled with horseradish peroxidase (HRP) (anti-IgG-HRP) catalyzed by 3,3’,5,5’-tetramethylbenzidine (TMB) mediator by chronoamperometry. A linear response was obtained in the range of 1:1000-1:200 v/v in phosphate buffer solution (PBS) and the limit of detection calculated was of 1:4947 v/v. The chronoamperometric method showed electrical signals directly proportional to antibody concentrations due to Ag-Ab specific and stable binding reaction.

In this paper, we concentrate on the study of the properties of residual Tsallis entropy for order statistics. Order statistics have an important role in reliability structural engineering for example for modelling lifetimes of series and parallel systems. The residual Tsallis entropy of ith order statistic from a continuous distribution function and its deviation from the residual Tsallis entropy of ith order statistics from a uniform distribution is investigated. In a mathematical framework, a method to express the residual Tsallis entropy of the ith order statistic from a continuous distribution in terms of the residual Tsallis entropy of the ith order statistic from a uniform distribution is provided. This approach may provide insight into the behavior and properties of the residual Tsallis entropy for order statistics. Further, we study the monotonicity properties of the residual Tsallis entropy of order statistics under dierent conditions. By studying these properties, deeper understanding of the relationship between the position of order statistics and the resulting residual Tsallis entropy is gained.

Background: The prognostic value of erythrocyte levels of the n-6 fatty acids (FAs) for total mortality and cardiovascular disease (CVD) outcomes remains an open question. Methods: We examined CV outcomes and death in 2500 individuals in the Framingham Heart Study Offspring cohort without prevalent CVD (mean age 66 years, 57% women) as a function of baseline levels of different length n-6 FAs (18 carbon, 20 carbon and 22 carbon) in the erythrocyte membranes. Clinical outcomes were monitored for up to 9.5 years (median follow up, 7.26 years). Cox proportional hazards models were adjusted for a variety of demographic characteristics, clinical status and RBC n-6 and long chain n-3 FA content. Results: There were 245 CV events, 119 CHD events, 105 ischemic strokes, 58 CVD deaths, and 350 deaths from all causes. Few associations between either mortality or CVD outcomes were observed for the n-6 FAs, with those that were observed becoming non-significant after adjusting for n-3 FA levels. Conclusions: Higher circulating levels of the marine n-3 FA levels are associated with reduced risk for incident CVD and ischemic stroke and for death from CHD and all-causes, however in the same sample, little evidence exists for association with n-6 FAs. Further work is needed to identify a full profile of FAs associated with cardiovascular risk and mortality.

Li⁺-conducting polyethylene oxide-based membranes, incorporating the N-butyl-N-methylpyrrolidinium bis(trifluoromethanesulfonyl)imide, are as electrolyte separators for all-solid-state lithium polymer batteries operating at medium-high temperatures. The incorporation of the ionic liquid remarkably improves the thermal, ion-transport and interfacial properties of the polymer electrolyte, which, in combination with the wide electrochemical stability even at medium-high temperatures, allow high current rates without any appreciable lithium anode degradation. Battery tests carried out at 80 °C have shown excellent cycling performance and capacity retention even at high rates, never tackled by ionic liquid-free polymer electrolytes. No dendrite growth onto the lithium metal anode was observed.

This article addresses the urbanization model in valley bottom areas in the city of São Paulo, an-alyzed in its urban planning and socio-environmental aspects, and examines the hydrological impacts triggered by its implementation. It argues that sustainable occupation of urbanized hy-drographic basins should be based on environmental criteria in order to attain a sustainable water management regime that can ensure urban and environmental resilience. In the “Introduction,” the article emphasizes that urbanization in São Paulo has neglected the natural features of river basins, promoting the channeling of watercourses, which resulted in floods and inundations. “Theoretical Basics” brings in key concepts related to the environmental approach of drainage infrastructure with gray and green-blue systems. “Methods” details our qualitative research, bibliographical analyzes, referential case studies, and cartographical analyzes (geoprocessing), focusing on a case study in the Jaguaré creek basin. “Results” includes guidelines and recom-mendations for an urbanization model adjusted to valley bottom areas, applicable to new patterns of urban occupation or to the adjustment of existing patterns. “Discussion” explores the concept of “local sustainable self-development,” and “Conclusions” highlights the importance of an inte-grated, multisectoral, and sustainable planning, adjusted to the characteristics of river basins in valley bottom areas, promoting a socially responsible urban occupation, especially in the face of climate change.

The military taxonomy of class indices for chemical and biological warfare agents considers halogenated tear agents (CS) to be incapacitating causing local pain and discomfort with associated reflexe. The removal yield of the organic substances present in the water depends on the environmental conditions, on the chemical composition of the water and on the chemical substance dissolved in the water, which constitutes the substrate of the metabolic activities of the microorganisms that use these substances in the biochemical reactions of the cellular enzyme complexes. The two -CN groups in the malonic nitrile molecule are strongly electron-attracting and activate the CH2 group to which they are linked, and because of this, malononitrile has the role of a methylene component in condensation reactions with aldehydes or ketones. The results obtained after analyzing the degree of hydrolysis in the samples that contained the biological suspension indicated that no CBM metabolites were detected in any biological sample, regardless of the test concentration, analyzed 24 h after incubation. In the parallel samples, the aqueous solutions of CBM without biological treatment had metabolites in the samples., at 30 minutes the degree of hydrolysis is 0.21%, at 60 minutes, the degree of hydrolysis is 5.42%, after 90 minutes, the degree of hydrolysis is 6.19%, and after 24 hours. the degree of hydrolysis is 23.41%. Chemical substances in contact with microorganisms are used by them in the biochemical processes in which they are involved, the retention time and biodegradation capacity have led to an increased effect of the metabolism of toxic substances, in metabolic reactions, organic substances are the source of carbon and energy for biochemical processes. The tests performed indicate that the suspension of Chlorella sp. consumed the entire amount of CBM and metabolites from the analyzed samples The tests prove that the biological material can be used for the decontamination of the affected areas.

Artificially designed, chimeric peptide-based recombinant vaccines are novel approaches to combat the phylogenetically diverse Foot and Mouth Disease (FMD) Virus (FMDV) strains. Among seven distinct serotypes, only serotype O and A are dominantly circulating in Bangladesh and neighbouring countries of Asia, where transboundary transmission, recurrent outbreaks and emergence of novel lineages FMDV are highly prevalent. The objective of this study was to develop multi-epitope recombinant peptides, procuring immunogenicity against circulating diverse subtypes of FMDV serotype O and A. Two chimeric peptides, named B1 (41.0 kDa) and B3 (39.3 kDa), have been designed to incorporate potential B-cell and T-cell epitopes selected from multiple FMDV strains, including previously reported and newly emerged sub-lineages. After expression, characterization and immunization of guineapigs with considerable antigen load of B1 and B3 followed by the serological assays revealed the significant protective immunogenicity, developed from the higher (100 µg) doses of both antigens, against most of the currently prevalent serotype O and A strains of FMDV. The efficient expression, antigenic stability, and multivalent immunogenic potency of the chimeric peptides strongly indicate their credibility as novel vaccine candidates for FMDV serotypes O and A circulating in Bangladesh and surrounding territories.

The local climate effects of utility-scale photovoltaic (PV) plants have also attracted more and more attention with the rapid development of PV industry. Turbulent fluxes and intensity characteristics for the PV plant and the adjacent reference site are investigated in the gobi area in Wujianqu in Xinjiang. Results indicate that near surface boundary layer is more unstable during the daytime while is more stable at the night in the PV plant than the reference site. The average roughness is 0.089m and 0.041m for the PV plant and the reference site respectively. The turbulence intensity in the vertical direction (I_w) of the PV plant is higher than the reference site especially during the daytime. The turbulent kinetic energy of the PV plant during the daytime is lower than the reference site.The momentum in the PV plant is higher than the reference site, especially during the daytime. Compared to the reference site, the PV plant has higher sensible heat flux and less latent heat flux. Site specific turbulent intensity relationships were developed for the PV plant and the reference site by analyzing wind components as a function of stability parameter (z/L). The turbulent components of wind followed 1/3 power law in the unstable conditions and stable conditions in the PV plant and the reference site.