This report demonstrates the first-time asymmetric synthesis of enantiopure structured triacylglycerols (TAGs) of the ABC type presenting three non-identical fatty acids, two of which unsaturated. The unsaturated fatty acids included the monounsaturated oleic acid (C18:1 n-9) and the polyunsaturated linoleic acid (C18:2 n-6). This was accomplished by a six-step chemoenzymatic approach starting from (R)- and (S)-solketals. The highly regioselective immobilized Candida antarctica lipase (CAL-B) played a crucial role in the regiocontrol of the synthesis. The synthesis also benefited from the use of the p-methoxybenzyl (PMB) ether protective group that enabled incorporation of two different unsaturated fatty acids to the glycerol skeleton. The total of six such TAGs were prepared, four constituting the unsaturated fatty acids in the sn-1 and sn-2 positions with a saturated fatty acid in the remaining sn-3 position of the glycerol backbone. In the two remaining TAGs the different unsaturated fatty acids accommodated the sn-1 and sn-3 end positions with the saturated fatty acid present in the sn-2 position. Enantiopure TAGs are urgently demanded as standards for enantiospecific analysis of intact TAGs in fats and oils.

The paper presents modelling of relationships between wind velocity distributions observed in Poland and technical requirements for wind power stations design. The wind velocities distributions for various locations in Poland are determined, and expressed in Weibull distribution parameters. Theoretical computations concerning the dependence of wind power station as function of wind speed and aire physical properties are presented. Conclusions important for design of power stations fitted to atmospheric conditions in Poland are given. Wind power plants have been an important source of electricity generation for many years.Wind power modelling with the use of wind speed is used to improve the accuracy of forecasts and analyses of the power production of wind farms.

This work focuses on short-term forecasting of PV output power. The multilayer perception (MLP), convolutional neural networks (CNN), and k-nearest neighbour (kNN) neural networks have been used singly or in a hybrid (with other algorithms) to forecast solar PV power or global solar irradiance with good success. Their performances in forecasting PV power have been compared with other algorithms but not with themselves. The study aims to compare performance of a number of neural network algorithms in solar PV energy yield forecasting under different weather conditions. The performance of MLPNN, CNN and kNN are being compared using solar PV (hourly) energy yield data for Grahamstown, Eastern Cape, South Africa. The choice of location is part of the study parameters to provide insight into renewable energy power integration in specific areas in south Africa that may be prone to extreme weather conditions. The kNN algorithm was found to have RMSE value of 4.95% and MAE value of 2.74% at its worst performance, and RMSE value of 1.49% and MAE value of 0.85% at its best performance. It outperformed the others by a good margin and kNN could serve as a fast, easy, and accurate tool to forecast solar PV output power.

Previous studies showed that some lamellarin-resembling annelated azaheterocyclic carbaldehydes and related imino adducts, sharing the 1-phenyl-5,6-dihydropyrrolo[2,1-a]isoquinoline (1-Ph-DHPIQ) scaffold, are cytotoxic in tumor cells and may reverse multidrug resistance (MDR) mediated by P-glycoprotein (P-gp). Herein, we synthesized and evaluated for their antiproliferative activity in four tumor cell lines (RD, HCT116, HeLa, A549) and ability of inhibiting P-gp-mediated MDR some ten diversely substituted 1-Ph-DHPIQ derivatives bearing at position 2 carboxylate groups (COOH, COOEt), nitriles (CN) and Mannich bases (e.g., morpholinomethyl derivatives). Lipophilicity parametrization and molecular docking calculations improved the understanding of the structure-activity relationships in cytotoxicity and P-gp inhibition of the investigated 1-Ph-DHPIQs, which led us to disclose a novel Mannich base HCl salt (8b’), which proved to be cytotoxic to all the tested tumor cell lines in the low micromolar range (IC50 < 20 M) and to inhibit in-vitro the efflux pumps P-gp and MRP1 responsible for MDR, with IC50s of 0.45 and 12.1 M, respectively.

Cassava (Manihot esculenta Crantz), domesticated in the Amazonian region of South America, presents an important diversity in Ecuador, where it is a main staple food; however, only few Ecuadorian cassava accessions have been included in international molecular assessments. The purpose of this study was to apply suitable cassava mi-crosatellites to characterize the genetic variability of the Ecuadorian cassava collection composed mainly of local landraces from the Coast, Andes and Amazonia regions. The use of microsatellite markers allowed the determination of the genetic diversity of the collection. Seven selected SSR primers, permitted to identify homozygous and hetero-zygous materials within the cassava collection of 133 accessions. The loci presented an average genetic diversity value of 0.7 and an average PIC value of 0.67, which is con-sidered high. Low number of duplicates (8.8%) were identified in the Ecuadorian col-lection which is not fully duplicated at CIAT. Currently, a wide range of cassava diver-sity is still cultivated in multi-crop agro-ecosystem, mainly in the Coast and Amazo-nian regions. Especially in the Amazonian region, due to important cultural uses of cassava by local ethnic communities, more in depth studies in the region could unveil the genetic diversity present in situ today.

A problem of efficacy of crystal growth methods for crystallization from solution or melt has been investigated. Axial vibrational control (AVC) technique was considered as a perspective method to manage both heat-mass transfer and chemical component composition of the melts in the case of crystallization of complex chemical compounds. Numerical modeling and the search for generalized dependencies made it possible to predict the AVC parameters that provide optimal heat and mass transfer modes for creating flat liquid-solid interfaces, as well as the component composition of dissociated melts of various chemical compounds – Ge, NaNO3, CdTe.

The technological revolution has contributed significantly to environmental and social issues worldwide. In higher education institutions, there is a theoretical gap in systematic reviews on the integration of digital transformation into sustainability. This systematic review of the literature aims to address this gap by exploring how digital transformation improves sustainability in higher education institutions, identifying emerging trends and best practices for effective strategies. Using the PRISMA guidelines, the study conducted a comprehensive search in the Scopus database, producing 1,686 publications from 2019 to 2024. The findings reveal a widespread awareness of digital technology integration but highlight a lack of consensus on sustainable integration strategies. Furthermore, the results demonstrate that educational achievements can be enhanced through tools and methodologies that align with the Sustainable Development Goals of the United Nations. The analysis identifies three primary domains: sustainability capabilities enabled by digital transformation, innovative sustainable approaches, and the conceptualisation of sustainability in higher education. The incorporation of digital tools, such as AI chatbots, institutions foster innovation and achieves sustainability objectives, thus transforming teaching and learning approaches. This review contributes significantly to understanding the role of digital transformation in promoting a sustainable and digitally enabled future in higher education.

Is it possible that educating women could be the key to reducing birth rates and protecting the environment? Women's education in 3rd countries is far more than just access to basic education. It is a pathway to economic growth, social stability and self-awareness. This essay reflects on the ethical challenges and benefits of educating women in areas such as interpersonal relationships, changing the traditional role of women and sustainability. In exploring this key issue, it is possible to discover that education can transform society and bring about real change, provided humanity accepts its responsibility for the state and sustainability of a quality environment for future generations.

Charge-dipole interactions are very common interactions among atoms and molecules, especially materials that can emit light or contain free charges. The second-order charge-dipole interactions, proportional to $\frac{1}{R^4}$, are stronger than the second-order dipole-dipole interactions or van der Waals interactions, proportional to $\frac{1}{R^6}$, at longer distances. In reality, there is more than one atom or charge; therefore, we focus on few-body charge-dipole interactions, such as charge-dipole-dipole interactions. Laser cooling and trapping allow us to study such interactions with much higher precision. In this article, charge-dipole interactions will be investigated in ultracold gases. To increase the interaction strength, we excite the ultracold atoms to highly excited states, Rydberg states. Here, we treat one Rydberg atom as a dipole, the excited electron and the ion core are the two poles of an electric dipole. Specifically, we study charge-atom interactions in ultracold Rydberg gases.

In this work, a method for measuring tow angles in carbon fiber components, based on the use of a polarized camera, is analyzed from a metrological point of view. Carbon fibers alter the direction of the reflected light electrical field, so that in each point of the surface of a composite piece the angle of polarization of reflected light matches the fiber orientation. A statistical analysis of the angle of linear polarization (AoLP) in each pixel of each examined area allows to evaluate the average winding angle. An evaluation of the measurement uncertainty of the method on a cylinder obtained by a filament winding process is carried out, and the result appears adequate for the study of the distribution of angles along the surface of the piece, in order to optimize the process.

Microplastics (MPs), typically defined as plastic fragments smaller than 5mm, are pervasive in terrestrial and marine ecosystems. There is a need for rapid, portable, low-cost detection systems to assess health and environmental risks. Fluorescent tagging with Nile Red (NR) has emerged as a popular detection method, but variations in fluorescent emissions based on NR solvent, plastic polymer, excitation wavelength, and additives complicate standardization. In this study, seven plastic samples stained with acetone-based NR were analyzed using a fluorescent spectrometer to identify optimal emission peaks across UV-Vis excitation wavelengths. These findings aid in selecting appropriate excitation wavelengths and optical filters for future detection systems. Additionally, a straightforward polymer identification scheme was validated against field-collected plastic samples, whose material composition was confirmed via Fourier Transform Infrared Spectroscopy. This work contributes towards developing accessible microplastic detection technologies by characterizing the fluorescent properties of NR-stained plastics and enhancing the capability for effective environmental monitoring. Future research will expand the dataset to include diverse plastics with varying additives and weathering, and incorporate computer-vision tools for automated data processing and polymer identification.

The objective of this study is to develop a predictive model for low-carbon bainitic steel utilising the P and λ parameters. The tempering activation energy of the steel was calculated through statistical methods. Kinetic curves for the hardness equivalents and a nomograph for tempering process parameters were plotted. The error analysis indicates that the predicted values based on the λ and P parameters had errors within 15% and 10%, respectively. The model can be effectively utilised to predict mechanical properties and optimise parameters during the tempering process.

Background: The goal of the study was to analyze variations in central, perifoveal, and peripheral retinal thickness (RT) and choroidal thickness (CT) in patients with diabetic macular edema (DME) measured with ultra-wide-field optical coherence tomography (UWF-OCT). Additionally, correlations between RT and CT in the central, perifoveal, and peripheral sectors and the presence of selected systemic factors were evaluated. Methods: A total of 74 consecutive adult diabetic patients with DME and 75 healthy controls were included. Study participants were divided into three groups: DME patients without panretinal photocoagulation (PRP; 84 eyes), DME patients after PRP (56 eyes), and healthy controls (125 eyes). RT and CT were analyzed in three zones: a central circle of 3 mm diameter (Central), a ring contained between a centered 9 mm circle and the central 3 mm circle (Perifoveal), and a second, more peripheral ring between centered 18 mm and 9 mm circles (Peripheral). Additionally, DME subgroups were analyzed according to the correlation of RT and CT with age, axial length, best corrected visual acuity (BCVA), diabetes duration, insulin therapy duration, body mass index (BMI), glycosylated hemoglobin (HbA1c) values, intravitreal injection (IVI) count, and the advancement of retinopathy assessed by the simplified diabetic retinopathy severity scale (DRSS). Results The increase in RT in the far peripheral sectors in DME patients was not significant. The increase in central and perifoveal RT and CT in PRP-naïve DME patients was strongly associated with poorer BCVA. Patients with DME after PRP presented with BCVA improvements significantly related to the number of IVIs. The amount of DME and RT in peripheral sectors were both independent of systemic factors such as BMI, duration of diabetes, duration of insulin intake, retinopathy severity, and HbA1c levels. Conclusion Peripheral retinal sectors in DME patients are less affected in terms of increase in their thickness compared to central ones. UWF-OCT provides valuable information on retinal and choroidal involvement in diabetic retinopathy complicated by DME.

This study investigates the environmental parameters contributing to the Urban Heat Island (UHI) effect in historically built environments, focusing on Matera's Street Canyon. The primary objective is to enhance understanding of heritage centers' ecological sustainability and management frameworks. The study involves two main phases: the initial research and development phase, including a comprehensive literature review and methodology development, followed by the empirical data gathering and analysis phase, utilizing advanced techniques such as 3D laser scanning, satellite imagery, and meteorological data integration. Key findings reveal significant correlations between urban morphology, material properties, and UHI intensity, suggesting stra-tegic urban planning interventions to mitigate UHI effects. This research provides actionable in-sights for urban planners and policymakers, emphasizing the importance of balancing heritage preservation with modern sustainability needs.

Compared to traditional multi-robot path planning problems, multi-chain robot path planning (MCRPP) is more challenging because it must account for collisions between robot units and between the bodies of a chain and the leading unit during towing. To address MCRPP more efficiently, we propose a novel algorithm called Multi-Train Safe Interval Path Planning (MT-SIPP). Based on safe interval path planning principles, we categorize conflicts in the multi-train planning process into three types: travel conflicts, waiting conflicts, and station conflicts. To handle travel conflicts, we use an improved k-robust method to ensure trains avoid collisions with other trains during movement. To resolve waiting conflicts, we apply a time correction method to ensure the safety of positions occupied by trains during waiting periods. To address station conflicts, we introduce node constraints to prevent other trains from occupying the station positions of trains that have reached their target stations and are stopped. Experimental results on three benchmark maps show that the MT-SIPP algorithm achieves about a 30% improvement in solution success rate and nearly a 50% increase in the maximum number of solvable instances compared to existing methods. These results confirm the effectiveness of MT-SIPP in addressing the challenges of MCRPP.

This research assesses the effectiveness of the Socio-Technical Assistance (STA) program combined with Owner-Driven Housing Reconstruction for rural private housing recovery after Nepal’s 2015 earthquake, particularly targeting vulnerable households. Through a quantitative 304-questionnaire survey, the study reveals that 96% of households credited STA activities for accelerating reconstruction, with 95% acknowledging its significance and 78% emphasizing its necessity. Notably,89% expressed dependency on STA for reconstruction, and 85% believed it heightened disaster risk reduction awareness. In conclusion, the study establishes that STA activities significantly contributed to the successful reconstruction of vulnerable households, addressing critical aspects such as financial support, technical assistance, housing accessibility, earthquake-resilient construction, improved livelihoods, and safety enhancements. The field study presents crucial recommendations to enhance the effectiveness of Socio-Technical Assistance (STA) activities in post-earthquake rural private housing reconstruction. Emphasizing the need for tailored, demand-driven interventions, the study cautions against relying solely on an Owner-driven Reconstruction model, challenging the one-size-fits-all strategy. The study proposes integrating tailored interventions into overarching recovery strategies, advocating for coordinated efforts to enhance Disaster Risk Reduction (DRR) awareness and cultivate resilient communities in particularly vulnerable households. Aligned with United Nations Sustainable Development Goal 11, which focuses on sustainable cities and communities. This research aims to enhance the literature on post-disaster humanitarian shelter and settlement by emphasizing the significance of inclusive and comprehensive approaches to recovery and reconstruction.

The Wnt/β-catenin signaling deregulation is associated with the pathogenesis of many human diseases, including hypertension and heart disease. The aim of the study was to immunohisto-chemically evaluate and compare the expression of Fzd8, WNT1, GSK-3ß and β-catenin genes in the hearts of rats with spontaneous hypertension (SHR) and DOCA-salt- induced hypertension. The myocardial expression Fzd8, WNT1, GSK-3ß and β-catenin was detected by immunohisto-chemistry and the gene expression was assessed with real-time PCR method. In SHR immunore-activity of Fzd8, WNT1, GSK-3β and β-catenin was attenuated in comparison to normotensive animals. In DOCA-salt immunoreactivity of Fzd8, WNT1, GSK-3β and β-catenin was enhanced. In SHR, decrease in the expression of genes encoding Fzd8, WNT1, GSK-3ß and β-catenin was observed compared to the control group. Increased expression of genes encoding Fzd8, WNT1, GSK-3ß and β-catenin was demonstrated in the hearts of rats DOCA-salt. Wnt signaling may play an essential role in the pathogenesis of arterial hypertension and the accompanying heart damage. Obtained results may constitute the basis for further research aimed at better under-standing the role of the Wnt/β-catenin pathway in the functioning of the heart.

Heart failure is associated with a significant mortality rate, and an elevated prevalence of this condition has been noted among hypertensive patients. The identification of predictive factors for heart failure progression in hypertensive individuals is crucial for early intervention and improved patient outcomes. In this study, we aimed to identify these predictive factors utilizing medical history data for hypertension patients. Specifically, we focused solely on utilizing medical data preceding the diagnosis of hypertension to enable patients to anticipate the onset of potential heart failure at the time of hypertension diagnosis. Age-specific and ICD system-specific predictive factors were identified utilizing the MIMIC-IV database through the application of two analytical approaches: chi-square tests and XGBoost modeling. Our findings reveal 21 overall predictive factors, encompassing conditions such as atrial fibrillation, the use of anticoagulants, kidney failure, obstructive pulmonary disease, and anemia. These factors were assessed through a comprehensive review of the existing literature. We anticipate that the results will offer valuable insights for the risk assessment of heart failure in hypertensive patients.

Grating (moiré) interferometry is one of the well-known methods for full-field in-plane displacement and strain measurement. There are many design solutions for grating interferometers, including systems with a microinterferometric waveguide head. This article proposes a modification to the conventional waveguide interferometer head, enabling the implementation of a polarization fringe phase shift for automatic fringe pattern analysis. The article presents both the theoretical consideration of the proposed solution and its experimental verification, along with the concept of the in-plane displacement/strain sensor using the described head.

The growing impact of Artificial Intelligence (AI) on Humanity is unavoidable, and therefore, “AI literacy” is extremely important. In the field of education – AI in education (AIED) – this technology is having a huge impact on the educational community and on the education system itself. The present study seeks to assess the level of AI literacy of teachers at Portalegre Polytechnic University (PPU), aiming to identify gaps, find the main opportunities for innovation and development and seek the degree of relationship between the dimensions of AI literacy, as well as identifying the predictive variables in this matter. As a measuring instrument, a validated questionnaire based on three dimensions (AI Literacy, AI Self-Efficacy and AI Self-Management) was applied to a sample of 75 teachers in the various schools of PPU. This revealed an average level of AI literacy (3.28), highlighting that 62.4% of responses are at levels 3 and 4 (based on a Likert scale from 1 to 5). The results also demonstrate that the first dimension is highly significant for the total dimensions, i.e., for AI Literacy, and no factor characterizing the sample is a predictor, but finding a below-average result in the Learning factor indicates a pressing need to focus on developing these skills.

In recent years, online review system attracts attention to assess seller-customer relations in the world of e-commerce. To address the quality concern of online review, especially incentivized ones, this study evaluates credibility and consistency based on reviews’ volume, length, and content to distinguish the impact of incentives on customer review behavior, improving review quality, and purchase decision-making. Software product reviews collected from software review websites, including Capterra, Software Advice, and GetApp undergo Exploratory Data Analysis (EDA) to reveal critical features such as cost, support, usability, and product features. The indirect impact of companies’ size, direct impact of users’ experience, and different impacts of changing situations during years on the incentive reviews’ volume are major findings of sentiment analysis. A/B testing results show a minimal to no impact of such reviews on purchasing decisions, highlighting discrepancies in credibility and consistency in volume, length, and content. Employing advanced techniques like Sentence-BERT (SBERT) and TF-IDF, the study explores semantic differences in reviews to improve recommendation systems for a more customized shopping experience. This approach seeks to establish a framework that discerns between review types and their effect on customer behavior. The findings contribute to developing more sophisticated and consistent e-commerce solutions, emphasizing the importance of authentic and reliable online reviews in influencing consumer choices.

The Kuznetsk Basin (Kuzbass) is one of the largest coal basins in Siberia and a reference area for the ancient Angaraland continent. The proximity of the Kuzbass and Siberian platform caused their biotic similarities in the Late Palaeozoic. However, due to biota endemism, the Kuzbass Upper Palaeozoic does not correlate directly with the International Chronostratigraphic Chart (ICC). This paper discusses radioisotopic (CA-ID-TIMS) dating of zircons from a volcanic tuff located in the Starokuznetsk Formation. This level matches the interval of the Balakhonka/Kolchugino (B/K) floral change in Kuzbass, i.e. the gradual replacement of cordaitoid-dominated wet forests (Balakhonka flora) by more arid fern-pteridosperm-cordaitoid assemblages (Kolchugino flora). New age (276.9 ± 0.4 Ma) directly correlates the Starokuznetsk Fm with the Upper Kungurian of the ICS. We compared the Kuzbass data with data of the Western Verkhoyanie, where Middle Permian ammonoids (Sverdrupites assemblage) occur in strata recording the B/K floral change. Available (ICC) and new datings indicate the lag between the B/K floral change in low (Kuzbass) and high (Verkhoyanie) latitudes of Angaraland. The B/K floral change in the Kuzbass began in the early Late Kungurian and was completed by the end of this age. In contrast, the B/K floral change in Verkhoyanie began at the end of the Late Kungurian and was completed in the Late Wordian. The delay in the floral changes at different latitudes of Angaraland suggests that existing interregional correlations need further improvement.

The use of biomarkers to measure immune responses in serum is crucial for understanding population-level exposure and susceptibility to human pathogens. Advances in sample collection, multiplex testing, and computational modeling are transforming serosurveillance into a powerful tool for public health program design and response to infectious threats. In July 2018, 70 scientists from 20 countries met to perform a landscape analysis of approaches that support an integrated serosurveillance platform, including the consideration of issues for successful implementation. Here, we summarize the group’s insights and proposed roadmap for implementation, including objectives, technical requirements, ethical issues, logistical considerations, and monitoring and evaluation.

Laminopathies are causally associated with mutations on Lamin A gene (LMNA). To date, more than 400 mutations in LMNA have been reported in patients. These mutations are widely distributed throughout the entire gene and are associated with a wide range of phenotypes. Unfortunately, little is known about the mechanisms underlying the effect of the majority of these mutations. This is the case of more than 40 mutations that are located at exon 4. Using CRISPR/Cas9 technology, we have generated a collection of Lmna exon 4 mutants in mouse C2C12 myoblasts. These cell models include different types of exon 4 deletions and the presence of R249W mutation, one of the human variants associated with a severe type of laminopathy (LMNA-associated congenital muscular dystrophy). We have characterized these clones by measuring their nuclear circularity, myogenic differentiation capacity in 2D and 3D conditions, DNA damage, and p-ERK and p-AKT levels. Our results indicate that Lmna exon 4 mutants show abnormal nuclear morphology. In addition, levels and/or subcellular localization of different members of the lamin and LINC complex are altered in all these mutants. Whereas no significant differences were observed for ERK and AKT activities, the accumulation of DNA damage was associated to the Lmna p.R249W mutant myoblasts. Finally, significant myogenic differentiation defects were detected in the Lmna exon 4 mutants. These results have key implications in the development of future therapeutic strategies for the treatment of laminopathies.

The Galápagos archipelago is a vast reservoir of terrestrial and marine biodiversity, owing in large part to its relatively recent volcanic genesis and colonization by humans. This unique ecological system is particularly susceptible to human, animal, and environmental impacts. Climate change, globalization, and the blurring of human-domestic animal-wildlife interfaces are poised to bring new threats and challenges to the region. A One Health perspective that simultaneously considers human, animal, and environmental health is imperative in assessing and mitigating the challenges facing the Galápagos Islands.In Part I of this review, we provide the historical context for biodiversity in the archipelago; discuss the role of invasive species in habitat destruction, fragmentation, and competition with endemic species; and summarize the established and emerging infectious disease threats. We also discuss the imperative to implement research, surveillance, and preventative measures to identify and manage future threats from a One Health perspective, with a specific emphasis on implications for wildlife health. In Part II, we outline the socioeconomic context of life in the Galápagos Islands, evaluate the current and predicted effects of climate change, and discuss direct anthropogenic factors affecting Galápagos biodiversity, such as tourism, fishing, pollution, and the illegal wildlife trade. We also examine the impact of the COVID-19 pandemic in the region. Throughout this two-part review, we build a cohesive picture of One Health in the Galápagos Islands by integrating past work, current needs, and emerging threats. We also consider overarching goals for conservation, ecosystem management, and socioeconomic sustainability that have been previously defined by both governmental and non-governmental stakeholders, and we identify discrete, implementable, and interdisciplinary recommendations that will facilitate achievement of those goals.

Most crops are fertilized with high amounts of nitrogen, and have an alarmingly low utiliza-tion efficiency. For this reason, the coordination between the fertilizer contribution and the ni-trogen requirements of the crop is very important. Therefore, the objective of this study was to determine the nitrogen use efficiency, and create new NUE indices that can determine and calculate the final destination of the assimilated nitrogen, for the formation and development of green bean plant organs, fertilized with molybdenum nanofertilizer applied foliarly and combined with soil fertilization of ammonium nitrate. The plants were grown in a greenhouse covered with anti-aphid mesh and irrigated with nutrient solution. Three sources of foliar Molybdenum (Nano fertilizer, Molybdenum Chelate and Sodium Molybdate) were applied in four doses of 0, 5, 10 and 20 ppm Mo, complemented with edaphic fertilization of NH4NO3 (0, 3, 6 and 12 mM of N). As results, the NUE indices showed that with the application of the nanofertilizer, the total biomass production increased 41.65% more than with the application of the chelate, and 36.84% more than with the application of molybdate. Finally, it is con-cluded that the use of NUE indices is an important approach that evaluates the fate of nitro-gen and accurately estimates plant yield.

In solving the Collatz conjecture, it turns out that if we let all integers k be 6n, 6n+1, 6n+2, 6n+3, 6n+4, 6n+5, then we can solve the Collatz conjecture periodically. The Collatz conjecture states that for any positive integer P (initial value), if n is even, divide n by 2; if n is odd, repeat the rule of multiplying n by 3 and adding 1, which always converges to 1. One open problem has been proved by this paper. The authors hope to contribute to the mathematical community by presenting simple proofs of conjectures in the history of mathematics such as the Collatz conjecture.

The survival rate of extracorporeal life support (ECLS) remains overall at 60 %. Research and development is slow, partly due to the lack of sophisticated experimental models. This publication introduces a dedicated rodent oxygenator (“RatOx”) and shows preliminary in vitro classification tests. The RatOx has an adaptable fiber module size for various rodent models. Gas transfer performance over the fiber module for different blood flows and fiber module sizes were tested according to DIN EN ISO 7199.At the maximum possible amount of effective fiber surface and a blood flow of 100 ml/min, the oxygenator performance has been tested to a maximum of 6.27 ml O2/min and 8.2 ml CO2/min, respectively. The priming volume for this the largest fiber module is 5.4 ml, while the smallest possible configuration with a single fiber mat layer has 1.1 ml of priming volume. The novel RatOx ECLS system has been evaluated in-vitro to comply to a high degree with all predefined functionality criteria for rodent sized animal models. We intend for the RatOx to become a standard testing platform for scientific studies on ECLS therapy and technology.

Seven patients in our clinical program who were diagnosed with high burden (>10%) premature ventricular contractions (PVCs) and concomitant significant upper GI disease with no other significant cardiac history demonstrated a significant reduction in the burden of PVCs following surgical or procedural interventions of the upper GI tract [68.34% reduction, p=0.024). Furthermore, in all cases, the origin of the PVCs was from the base of the right ventricular outflow tract (RVOT). This is the first report in the literature that we are aware of to report this unique association for which we propose a dual mechanism of action of vagally mediated upper GI driven PVCs and a direct anatomical effect of these upper GI anatomies on the right ventricular outflow tract (RVOT) of the heart. These are very prelimary findings that warrant larger clinical and mechanistic studies that may ultimately define a new subset of PVCs for which we propose a term, “E-PVCs”.

Background:Fontan completion is the last stage of univentricular repair, which drains the inferior vena cava against gravity to a higher-pressure pulmonary arterial circulation. The passivity and anti-gravity nature of this circulation render a failing Fontan, not an uncommon encounter, twenty years ago, Rodefeld and colleagues, decided to explore the feasibility of vascular pumps to support the passive nature of Fontan circulation, and since then, trials are still ongoing, and we aimed through this review to wrap up the results of these trials. Methods:A literature review has been conducted, to identify any in vivo or in vitro trial of a Fontan assist device. Several outcome parameters determined whether the trial will be included or not in this review, including, the flow rate of a pump if applicable, the number of compressions per minute if a compression device has been used, the resultant flow rate, the inferior and superior vena cava pressures, associated with each setting of the respective device, and any evidence of hemolysis or clotting within the circuit. Results:A total of ten trials have been included, with 23 different settings. Three designs have been identified, out of which two fall within the pump design, namely the connecting chamber and the intravascular pump designs; only one trial explored the possible use of a compression device. The commonest design encountered in in-vivo trials was the intravascular pump (67%). No reports of significant hemolysis or thrombosis were found. An increasing flow rate beyond 5L/min was associated with a negative outcome in the connecting chamber design, increasing upstream pressure in the SVC, while intravascular pumps did not display this limitation. Conclusion:Univentricular heart patients are a relatively small population, with very extensive needs, despite twenty years of trials, no study has yet concluded the optimal design or settings for a Fontan assist device. In this review, we identified that the intravascular pump remains the most practical design, due to its easy mode of insertion, and that it is not faced with the limitation or risk of increasing upstream resistance. There is still a long way to conclude its use as other designs such as compression devices have not yet been fully studied.

Background Main treatment modality for spinal meningiomas (SM) is gross total resection (GTR). However, optimal timing of surgery, especially in cases with absent or mild neurological symptoms remains unclear. The aim of this study is to assess the impact of early-stage resection on neurological outcome, quality of life (QoL) and quality of care. The primary objective was a favorable neurological outcome (McCormick scale 1); Methods: We retrospectively analyzed data from patients operated on SM between 2011 and 2021. Patients with mild neurological symptoms preoperatively (McCormick scale 1 and 2) were compared to those with more severe neurological symptoms (McCormick scale 3-5). Disabilities and QoL were assessed according to validated questionnaires (SF36, ODI, NDI). Results: Age, spinal cord edema, thoracic localization, and spinal canal occupancy ratio were associated with more severe neurological symptoms (all p<.05). Patients presented with mild symptoms were associated with favorable neurological outcome (OR: 14.778 (95%CI 3.918-55.746, p<.001), which is associated with shorter hospitalization, better QoL and less disabilities (p<.05). Quality of care was comparable in both cohorts; Conclusions: Early surgical intervention of SM, before the development of severe neurological deficits, should be considered as it is associated with a favorable neurological outcome and quality of life.

In this paper, four probability functions are compared with the purpose of establishing a methodology to improve the accuracy of the estimated wind energy in a desert city in northwestern Mexico. For the statistical modeling, 3 time series of wind speed data were used, corresponding to the years 2017, 2018, and 2019, recorded with a sonic anemometer at a sampling frequency of 10 Hz. From these, the analysis is performed with different stationarity periods (5, 30, 60, and 600 seconds). The estimation of the parameters characterizing the probability density functions was performed using different methods; the statistical models were evaluated by the coefficient of determination and the Nash-Sutcliffe efficiency coefficient, while their accuracy by the measured quadratic error, the mean square error, the mean absolute error, and the mean absolute percentage error. It was found that Weibull with the energy pattern factor method and Gamma using the method of moments were the probability density functions that best describe the statistical behavior of the wind speed and, therefore, better estimate the energy generated, so it is concluded that the proposed methodology will allow having greater confidence, both in the estimation of the wind speed and in the small wind energy available for its use.

Climate change presents an urgent and impending threat to virtually all global biological systems. In recent years, there has been a surge in research endeavors aimed at investigating the potential relationship between changes in climate patterns and the spread of infectious diseases. This scoping review included studies on global warming and infectious diseases from 2019 to 2023, The studies included in this research were obtained from reputable academic databases such as Web of Science and google scholar. A systematic keyword search was conducted to identify relevant studies, and a predefined set of inclusion criteria was applied to review and select the appropriate studies for analysis. This review found that climate change has a remarkable impact on the dissemination and incidence of many infectious diseases, it increases microbial resistance and may increase the prevalence the arthropods-borne diseases with mild effect on fungal infections, also, the low to middle income countries may be affected more than other countries from these virulent pathogens, this study concluded that a future research in the field of climate change and infectious diseases should involve a thorough examination of the transmission of diseases, considering both direct and indirect modes of transmission

Background The nematode Caenorhabditis elegans (C. elegans) possesses a sophisticated sense of smell and is used for a novel cancer screening test that utilizes the chemotaxis index. We designed a single-institution, prospective study to confirm the ability of Nematode Nose (N-NOSE) to determine preoperative chemotherapy's efficacy for esophageal cancer patients. Patients and Methods We investigated the predictability of N-NOSE screening for the clinical effects of preoperative chemotherapy for esophageal cancer patients receiving radical surgery. The index reduction score (IRS) was calculated by chemotaxis of C. elegans at three points: before treatment, before surgery, and after surgery, and its clinical relevance was examined. Result Thirty-nine patients with esophageal cancer were enrolled from August 2020 to December 2021 and 30 patients receiving radical surgery were examined. Complete response or partial response was achieved in 23 cases (76.7%). When the target of the treatment effect was complete response only, the prediction accuracies of the IRS calculated by area under the curve was 0.85 (95% Confidence interval: 0.62-1) in clinically achieving complete response group, and the sensitivity and specificity were 1 and 0.63, respectively. Conclusion Index reduction score using N-NOSE screening may reflect the efficacy of chemotherapy for esophageal cancer patients. A large-scale prospective study at multiple centers is desired in the future.

Froth flotation, a widely used mineral beneficiation technique, generates substantial volumes of data, offering the opportunity to extract valuable insights from these data for production line analysis. The quality of flotation data is critical to designing accurate prediction models and process optimisation. Unfortunately, industrial flotation data are often compromised by quality issues such as outliers that can produce misleading or erroneous analytical results. A general approach is to preprocess the data by replacing or imputing outliers with data values that have no connection with the real state of the process. However, this does not resolve the effect of outliers, especially those that deviate from normal trends. Outliers often occur across multiple variables and their values may occur in normal observation ranges, making their detection challenging. An unresolved challenge in outlier detection is how far is far enough for an observation to be considered an outlier. Existing methods rely on domain experts’ knowledge which is difficult to apply when experts encounter large volumes of data with complex relationships. In this paper, we propose an approach to conduct outlier analysis on a flotation dataset. The approach uses a 2σ rule as the threshold to find quasi-outliers and multiple machine learning (ML) algorithms including k-Nearest Neighbour (kNN), Local Outlier Factor (LOF), and Isolation Forest (ISF) to identify true outliers. The approach then analyses the mutual coverage between quasi-outliers and outliers from the ML algorithms to identify the most effective outlier detection algorithm. We found that the outliers by kNN cover outliers of other methods. We use the experimental results to show that outliers affect model prediction accuracy and excluding outliers from training data can reduce the average prediction errors.

The study of blowfly (Diptera: Calliphoridae) biodiversity and distribution is crucial for forensic investigations. Abiotic and biotic factors, such as seasonal and habitat type, have significant impact on blowfly populations. However, only a few forensic entomology studies have been conducted in South Korea, particularly in the Gyeongsangnam-do region. To address this, an extensive year-long survey was conducted to analyze the compositions, habitat preferences, distribution, and seasonal abundance of forensically relevant blowflies in urban and forested habitats of Gyeongsangnam-do, utilizing mouse carcass-baited traps set for 48 h each month. A total of 3,478 adult blowflies were recorded, encompassing six genera and 14 species, with a noted absence of specimens during the winter months. The predominant species was Lucilia porphyrina, accounting for 37.1% of the total sample, followed by Chrysomya pinguis (27.5%), Lucilia sericata (7.6%), and Lucilia illustris (7.1%). The species composition was consistent across all surveyed regions; however, seasonal variation in species diversity was evident, with a peak in spring and a decline in summer. Notably, certain species exhibited clear preferences for either urban (Calliphora calliphoroides and L. sericata) or forested habitats (L. porphyrina and Ch. pinguis). This pioneering study elucidates the diverse blowfly communities in Gyeongsangnam-do, highlighting significant seasonal and habitat-dependent variations. These findings enrich our understanding of blowfly ecology in this region, offering valuable insights for forensic applications and underscoring the necessity for ongoing entomological surveillance and research.

It is well-known that simulation tools are essential for the design and optimization of wireless communication systems. In this paper proposes a python script that can be used for planning and predicting a connection link budget by analyzing its basic parameters. Our proposal consists of an application that calculates the connection budget for point-to-point links operating at 5 GHz, taking into account all the necessary microwave parameters. For validating the efficiency of the proposed tool, the paper presents comprehensive simulation results derived from comparing our tool to a couple of other simulation tools by means of calculating the same parameters.

This paper investigates the possible failure modes of the product development process in production companies that are active in the B2C markets with a focus on household products. Since these cases require short lead times and are difficult to differentiate, in many instances the end result will not be the desired one and could affect profitability for a season or for good. A model of these possibilities is created and an approach to plan contingencies for their solutioning is proposed in the article. The main guideline is to switch from failure probability determination to accepting failure as inevitable and using digital solutions to reinforce the development process in order to offset its impact. For this goal, an Industry 5.0 Abatement Factor (abbreviated IFAF) is introduced in the contingency planning approach, that factors in the evaluation the low cost of digital instruments and the proper mix of Technology, Humans and AI (abbreviated THAI). The new working procedure based on these concepts and their interlinkages is discussed based on specific examples.

In this study, the NiCrAlY coating was prepared using the atmospheric plasma spraying (APS). The sample was then exposed to a continuous fiber laser beam. Laser surface melting (LSM) can effectively homogenize the composition of the coating. It also reduced the defects and roughness. The coating was examined using optical microscopy (OM), scanning electron microscopy (SEM), and X-ray diffraction (XRD) analysis. The process parameters of the LSM consist of laser power and scan rate. The high-temperature oxidation test was conducted for 200 hours at a temperature of 1100 °C. After a period of 200 hours, the primary coating demonstrated the emergence of an aluminum oxide layer, along with the presence of harmful spinel oxides. The laser remelting technique was used to modify the surface, which led to the uniform growth and development of an aluminum oxide layer (α-Al₂O₃) during the oxidation examination. Therefore, it appears that the reduction in grain size caused by laser remelting prevents the wrinkling of Al2O3 oxide. This process represents a novel and alternative approach to modifying MCrAlY coatings.

Due to a simple crane limited capacity; there is an urgent need to use high capacity cranes such as tower cranes. However, with regard to their high expense, we have to take into consideration selecting what type of cranes to be utilized which has been discussed by many researchers. In this research, a proposed technique was created to select the suitable type of crane and best place for crane erection, in addition to minimum radius for requested crane in order to minimize cost. To fulfill that target, a computer program is designed to numerate these problems, demonstrating an example explaining how to apply program and the result donated best place.

Matrix metalloproteinases have been implicated in muscular dystrophy progression and recent studies described the role of MMP-10 in skeletal muscle pathology of young dystrophic mice. Nevertheless, its implication in dystrophin deficient hearts is still missing. Here, we aimed at investigating MMP-10 implication in severe muscular dystrophic progression and characterize MMP-10 loss in skeletal and cardiac muscles of aged dystrophic mice. We examined the histopathological effect of MMP-10 ablation in aged mdx mice, both in the hind limb muscles and heart tissues. We have found that MMP-10 loss compromises survival rates of aged mdx mice, with skeletal and cardiac muscles developing a chronic inflammatory response. Our findings indicate that MMP-10 is implicated in severe muscular dystrophy progression, identifying a new area of investigation that could lead to future therapies for dystrophic muscles.

It is known that breastfeeding difficulties are often seen in the first weeks of the postpartum period and that various factors are effective in the mother's early cessation of breastfeeding. Mothers' self-efficacy and perception of insufficient milk are among these factors. This study aimed to examine the effect of hot application applied to the breast with the help of Thera Pearl in the postpartum period on milk perception and postpartum breastfeeding self-efficacy. This is a randomized controlled study. The study was completed with a total of 64 puerperal mothers, 31 of whom were control and 33 were experimental. Personal Information Form, Breastfeeding Observation Form, Breastfeeding Self-Efficacy Scale and Insufficient Milk Perception Scale were used to collect data. As a result, self-efficacy and milk perception are important factors affecting breastfeeding. In this study, we found that Thera pearl application increased breastfeeding self-efficacy, but did not affect milk perception.

This research focusing on the environmental impact of tire and brake pad wear constitutes a significant area of transport-related studies. These two key vehicle components are not only the most frequently worn, but also generate micro and nano pollutants (i.e., rubber, metal oxides) that potentially harm the environment. Over half of the globally produced natural and synthetic rubbers, which amounted to about 30 million tons in 2022, are used for tire production. According to Wagner et al.'s research, over 1.3 million tons of such particles are released due to wear and tear in the European Union alone. This work focuses on examining snow deposits from various locations in an urban agglomeration (Poznan, Poland) in the winter season. FT-IR and NMR spectroscopic studies, optical and electron scanning microscopy SEM-EDS, and particle size studies using the DLS technique were conducted for a detailed characterization of pollutants in the environment. The conducted particle separation methods allowed for the extraction of a fraction mainly containing gum residues with particle sizes less than 2 µm. The results of these studies are crucial for understanding the impact of vehicle part exploitation on the environment.

The aim of this study was to investigate the differentially expressed genes associated with intramuscular fat deposition in the longissimus dorsi muscle of Xinjiang Brown Bulls. The longissimus dorsi muscles of 42 Xinjiang Brown Bulls were selected under the same feeding conditions. The intramuscular fat content of muscle samples were determined by Soxhlet extraction method, from which 5 samples with high intramuscular fat content (HIMF group) and 5 samples with low intramuscular fat content (LIMF group) were selected. It was found that the intramuscular fat content of HIMF group was 46.054% higher than that of LIMF group. Muscle samples produced by paraffin section for morphological observation. It was found that the fat richness of the HIMF group was better than that of the LIMF group. Transcriptome sequencing technology was used to analyze the gene expression differences of longissimus dorsi muscle. Through in-depth analysis of the longissimus dorsi muscle by transcriptome sequencing technology, we screened a total of 165 differentially expressed genes. The results of Gene Ontology (GO) enrichment analysis showed that the differentially expressed genes in the two groups were mainly clustered in biological pathways related to carbohydrate metabolic processes, redox processes and oxidoreductase activities. Kyoto Encyclopedia of Genes and Genomes (KEGG) enrichment analysis showed that the differentially expressed genes were significantly clustered in 15 metabolic pathways, which mainly covered fatty acid metabolism (related to lipid metabolism and glucose metabolism), pentose phosphate pathway, Peroxisome Proliferator-Activated Receptors (PPAR) signalling pathway and other important metabolic processes. The three genes that were predominantly enriched in the glycolipid metabolic pathway by analysis were SCD5, CPT1C, and FBP2, all of which directly or indirectly affect intramuscular fat deposition. In summary, the present study investigated the differences in gene expression between high and low intramuscular fat content in the longissimus dorsi muscle of Xinjiang Brown Bulls by transcriptome sequencing technology, and revealed the related signalling pathways. Therefore, we hypothesized that SCD5, CPT1C, and FBP2 were the key genes responsible for the significant differences in intramuscular fat content of the longissimus dorsi muscles in a population of Xinjiang Brown Bulls. We expect that these findings will provide fundamental support for subsequent studies exploring key genes affecting fat deposition characteristics in Xinjiang Brown Bulls.

3D Printing /Additive manufacturing holds a promising future in healthcare as it aids in visualizing things and making 3D objects which is very important in different areas of medicine. The concept of one size fits all has failed the quality of care delivered by us in healthcare which demands customised needs for patient care to create 3D printed tissues, make personalized prosthetics, implants and physical models of the human body. The materials used for printing models and other healthcare devices for medical education, patient needs, and prototyping are increasing. The application of different materials for use in healthcare is not studied. New materials are also available for the various applications in healthcare industry. This experimental study was conducted to review the nine distinct 3D printing filament materials like PETG, PA, ABS, PLA, HIPS, PMMA, Ceramic, Carbon Fiber, and (PLA + Metal Composite) with the help of a 3D printed physical model of T-12 thoracic vertebrae using all the abovementioned materials. The evaluation of materials was based on diverse mechanical properties, applications across medical fields, performance metrics, costs, accuracy, and quality. The assessment This study also focuses on comparison of mechanical properties such as tensile strength, compressive strength of the abovementioned materials with human bone. The study also reviews the 3D printing process and explores its utilization in biomedical applications. The Insights about the application of various materials holds a promising future for development of newer materials for healthcare industry.

MiR-204 is a small noncoding RNA with diverse regulatory roles in breast cancer (BC) development and progression. miR-204 is implicated in the instauration of fundamental traits acquired during the multistep development of BC known as hallmarks of cancer. It may act as a potent tumor suppressor by inhibiting key cellular processes like angiogenesis, vasculogenic mimicry, invasion, migration, and metastasis. It achieves this by targeting multiple master genes involved in these processes, including HIF-1α, β-catenin, VEGFA, FAK, FOXA1, among others. Additionally, miR-204 modulates signaling pathways like PI3K/AKT and interacts with HOTAIR and DSCAM-AS1 lncRNAs, further influencing tumor progression. Beyond its direct effects on tumor cells, miR-204 shapes the tumor microenvironment by regulating immune cell infiltration, suppressing pro-tumorigenic cytokine production, and potentially influencing immunotherapy response. Moreover, miR-204 plays a crucial role in metabolic reprogramming by directly suppressing metabolic genes within tumor cells, indirectly affecting metabolism through exosome signaling, and remodeling metabolic flux within the tumor microenvironment. This review aims to present an update on the current knowledge regarding the role of miR-204 in the hallmarks of BC. In conclusion, miR-204 is a potential therapeutic target and prognostic marker in BC, emphasizing the need for further research to fully elucidate its complex roles in orchestrating aggressive BC behavior.

(1) The objective of this study is to describe and compare the levels of physical activity, preferences for leisure-time physical activity and the frequency of non-sedentary behaviors of Portuguese, Italian and Spanish students attending, respectively, higher education in Portugal, in Italy and Spain; (2) Methods: 1354 Portuguese, Spanish and Italian students (21.2 ± 2.9 years) participated in the study. An online questionnaire was used to collect data and a priori power analysis statistical procedures were used using G∗Power (3.1.9.7) and one-way Anova; (3) Results: The highest levels of sedentary lifestyles are found among Spanish students, followed by the Portuguese and lastly the Italians. Regarding the levels of physical activity Spanish students perform more minutes of low and moderate activity compared to Italians and Portuguese. Italians students are the ones who perform more vigorous activity; (4) Conclusions: We can conclude that Spanish students have a higher level of sedentary lifestyle with the majority of physical activity being low and moderate, while Italians are those who have more time spent on vigorous physical activity and naturally a lower level of sedentary lifestyle. However, it is worth highlighting that all three countries reach the minimum levels of physical activity recommended by the WHO.

Recent experiments devoted to characterizing the behavior of sessile ferroelectric liquid droplets on ferroelectric solid substrates, showed the existence of a droplet electromechanical Rayleigh-like instability. The instability is induced by the bulk polarization of the ferroelectric fluid which couples to the polarization of the underlying substrate through its fringing field and solid-fluid interface coupling. With the aim of characterizing this phenomenon, namely the coupling between the polarizations of a fluid and a solid material, we studied the behavior of ferroelectric liquid droplets confined between two solid substrates, arranged in different configurations realized so to generate fringing fields with different profiles. Results show that the features of the droplets instability are indeed affected by the specific fringing field shape in a way dominated by the minimization of the electrostatic energy associated to the bulk polarization of the ferroelectric fluid.

This study investigates the energy profile of a regional hospital in North America using an ASHRAE Level 2 Energy Audit. The audit aimed to assess the efficiency of existing systems, identify areas for improvement, and recommend cost-effective measures to reduce energy consumption and environmental impact. The analysis revealed a well-maintained heating system with efficient boilers. However, a critical concern emerged regarding operational risks due to the lack of redundancy in the cooling system. To address this vulnerability, the study recommends installing an air-cooled chiller for increased operational resilience. The economic feasibility of proposed improvements was evaluated, highlighting the balance between initial investment and long-term savings in energy costs and reduced greenhouse gas emissions. The findings contribute to the discourse on sustainable healthcare practices, emphasizing the importance of energy audits, strategic planning, and redundancy measures for optimized performance and environmental responsibility in hospitals.

We bring a strength-based and socially-oriented lens to behaviors observed in profound autism. Social deficits are a defining characteristic of autism. Yet humans’ biological drive for social connection is sufficiently strong that is should be observable, in some form at least, in individuals with autism. We describe a case that validates this view. Mahad is a 20-year-old Pakistani-American male, with intellectual disability, and minimal verbal abilities. Mahad has an intense interest in food and the steps involved in food preparation. He employs and capitalizes on his family’s meal routines to ensure continual social attention from his mother. When not immersed in food, Mahad uses his limited capacities to pursue the additional biological needs of exploring his environment, seeking information, and developing his cognitive abilities.

This paper proposes a methodology for the development and its Verification and Validation(V&amp;V) of safety-rated software. The development methodology is based on the structured analysis and structured design methodology, which has been proven in the field of safety software development during long period. The suggested the development and the V&amp;V methodology additionally focuses on the quality attributes 3C+T (completeness, Correctness, Consistency and traceability), which are important criteria in IEC international standards. The software development life cycle is compiled from IEC international standardization, which are of the requirements analysis phase, design phase, implementation phase, testing phase, installation/commissioning phase, and operation &amp; maintenance phases. The activities of the development process method were defined from requirements analysis to implementation, and the activities of the verification and validation were defined to include the scope of the developer's activities and then to include the test phase, installation/commissioning phase, and operation phases additionally. In other words, testing phase performed by the developer was defined as informal testing, and testing performed by the verifier according to test criteria, test plans, and test procedures was defined as formal testing. According to proposed methodology, the requirements phase defines the sequence of Entity Relationship Diagram (ERD)-Context Diagram-Data Flow Diagram (DFD), functional decomposition process and defines operational scenario. In the design phase, module design such as task analysis and task allocation were defined. In the implementation phase, we listed the coding guidelines that must be followed for safety-related system. The test phase defined the test criteria, test plan, test procedure, and test result report activities. In the installation/commissioning and operation phases, recommendations for improving reliability, quality, and safety were proposed for deliverables such as user documentation and technical documentation.

Abstract: Safety issues related to the electrification of more electric aircraft (MEA) need to be addressed because of the increasing complexity of aircraft electrical power systems and the growing number of safety-critical sub-systems that need to be powered. Managing the energy storage systems and the flexibility in the load-side plays an important role in preserving the system’s safety when facing an energy shortage. This paper presents a system-level centralized operation management strategy based on model predictive control (MPC) for MEA to schedule battery systems and exploit flexibility in the demand-side while satisfying time-varying operational requirements. The proposed online control strategy aims to maintain energy storage (ES) and prolong the battery life cycle, while minimizing load shedding, with fewer switching activities to improve devices lifetime and to avoid unnecessary transients. Using a mixed-integer linear programming (MILP) formulation, different objective functions are proposed to realize the control targets, with soft constraints improving the robustness of the model. Besides, an evaluation framework is proposed to analyze the effects of various objective functions and the prediction horizon on system performance, which provides the designers and users of MEA and other complex systems with new insights into operation management problem formulation.

Intermediate temperature solid oxide fuel cell (SOFC) operation provides numerous advantages such as high combined heat and power (CHP) efficiency, potentially long-term materials stability, and the use of low-cost materials. However, due to the sluggish kinetics of the oxygen reduction reaction at intermediate temperature, the cathode of SOFC requires an efficient and stable catalyst. Significant progress in the development of cathode materials has been made over recent years. In this article, multiple strategies for improving the performance of cathode materials have been extensively reviewed such as A and B site doping of perovskites, infiltration of catalytic active materials, the use of core-shell composites, etc. Emphasis has been given to intrinsic properties such as thermal expansion compatibility, chemical and thermal stability, and oxygen transport number. Furthermore, to avoid any insulating phase formation at the cathode/electrolyte interface, strategies for interfacial layer modifications have also been extensively reviewed and summarized. Based on major technical challenges, future research directions have been proposed for efficient and stable intermediate temperature solid oxide fuel cell (SOFC) operation.

Being able to express broad families of equivariant or invariant attributed graph functions is a popular measuring stick of whether graph neural networks should be employed in practical applications. However, it is equally important to learn deep local minima of losses (i.e., with much smaller loss values than other minima), even when architectures cannot express global minima. In this work we introduce the architectural property of attracting GNN optimization trajectories to local minima as a means of achieving smaller losses. We take first steps in satisfying this property for losses defined over attributed undirected unweighted graphs with a novel architecture, called Universal Local Attractor (ULA). The latter refines each dimension of end-to-end trained node feature embeddings based on graph structure to track the optimization trajectories of losses satisfying some mild conditions. The refined dimensions are then linearly pooled to create predictions. We experiment on 10 tasks, from node classification to clique detection, on which ULA is comparable with or significantly outperforms popular alternatives of similar or greater theoretical expressive power.

The maritime industry contributes to over 80% of global trade and ranks as the sixth-largest emitter of greenhouse gases. The International Maritime Organization has taken strides to reduce these emissions, while the European Union spearheads efforts to establish sustainable maritime transport. However, meeting decarbonisation targets poses significant challenges, with the potential implications of adopting an EU Emission Trading System (ETS) on shipping allowances, particularly at specific borders. If not managed effectively, this could result in diversifying regular container shipping routes away from EU ports, potentially leading to increased shipping emissions and disrupting the logistics trade and security chain. These challenges are exacerbated by the International Maritime Organization's lack of a carbon fee on bunkering, which creates an imbalance. The ETS Directive has fostered unfair competition between EU and non-EU ports due to discrepancies in applying emission unit allowances. It is imperative to implement preventive measures to contain and prevent the shift of operations from EU ports to nearby ports, ensure equitable treatment of EU transhipment ports and their competitors, and thwart carbon leakage. Additionally, the recent Houthis attacks on the Red Sea have significantly impacted shipping costs on the Cape of Good Hope route to Europe, necessitating increased allowances to and from Europe.

The magnetic properties of 0.10 mm ultra-thin grain-oriented (UTGO) silicon steel and Fe-based amorphous (FBA) alloy under sinusoidal excitation were measured experimentally, and the magnetic field strength and iron loss of the two materials under different frequencies and magnetic densities were obtained. Based on the measured data, the magnetization and loss characteristics of the two materials were analyzed and compared. Furthermore, two Epstein square ring models of the same specification and different materials were designed, and the reliability of the models was verified. Then, the electromagnetic characteristics of the two Epstein square ring models at higher and lower frequencies were calculated by using the finite element method, and the iron loss was obtained and compared. The results show that the FBA alloy has good application characteristics at low frequency and low power, and the 0.10 mm UTGO silicon steel has good application characteristics at high frequency and high power. This research can provide important data basis to promote the application of these two materials in new energy equipment.

To date, deep-tech entrepreneurship and sustainable entrepreneurship are both attracting the interest of researchers. Indeed, deep-tech is being employed to address future sustainable challenges in the present. Nevertheless, the process of deep-tech startups is filled with distinct obstacles. These types of startups may necessitate more targeted sustainable entrepreneurial process and specialised knowledge compared to conventional technological startups or general sustainable entrepreneurial process. Currently, there are only publications discussing either a sustainable en-trepreneurial process or conventional technical startups. Therefore, the aim of this article is to in-vestigate the process of sustainable entrepreneurs as they transition from startup ventures to scaleup enterprises within the context of deep-tech industry. Based on previous sustainable entre-preneurial processes, a multiple case study was conducted within six deep-tech startups in order to find out the sustainable process pattern. A conceptual model of sustainable entrepreneurial process in deep-tech industry is established including five phases with six activities: (i) Sustainable idea definition; (ii) Sustainable opportunity recognition and evaluation; (iii) Venture launch; (iv.i) Sustainable products/ services development; (iv.ii) New sustainable enterprise financing; and (v) Sustainable enterprise scaleup. This process enables sustainable deep-tech entrepreneurs to necessarily have an overview of key entrepreneurial stages to navigate from the startup to scaleup process.

Inflammatory myofibroblastic tumor (IMT) is a rare soft tissue tumor of mesenchymal origin that most commonly presents in children. IMTs hold non-specific symptoms and radiological features, rendering diagnosis challenging. Presentation: We report a case of a 26-year-old man who was diagnosed at a different center with IMT of the right lower lobe. He underwent lobectomy with a positive gross margin, after which he was referred to our institution for further management, where we performed redo surgery with removal of residual tumor from the bronchial stump. The case presented here shows that interdisciplinary surgical planning is vital to ensure proper detection and successful tumor resection, while highlighting a unique case of recurrence necessitating a redo surgery.Conclusion: IMT is a rare entity in adults presenting with diverse, non-specific symptoms. IMT’s usually follow a favorable prognosis, but behavior may be unpredictable. While uncommon in adults, strong clinical suspicion is warranted. Complete surgical resection is the treatment of choice and follow up is crucial given the potential for recurrence.

Thermal expansion of four alkaline-earth borates, namely Ca3B2O6 (0D), CaB2O4 (1D), Sr3B14O24 (2D) and CaB4O7 (3D), have been studied by in situ high-temperature powder X-ray diffraction (HTXRD). Strong anisotropy of thermal expansion is observed for the structures of Ca3B2O6 (0D) and CaB2O4 (1D) built up from BO3 triangles only: these borates exhibit the maximal expansion perpendicular to the BO3 plane, i.e. along the direction of weaker bonding in the crystal structure. Layered Sr3B14O24 (2D) and framework CaB4O7 (3D) built up from various B-O groups expand less anisotropically. Thermal properties of the studied compounds compared to the other alka-line-earth borates are summarized depending on the selected structural characteristics like anion dimensionality, residual charge per one polyhedron (BO3 BO4), cationic size, and structural com-plexity. For the first time these dependencies were established as an average for both types of polyhedra (triangle and tetrahedron) occurring in the same structure at the same time. The most common trends were identified for : (i) Melting temperature decreases as the dimensionality of the borate polyanion, and more precisely, as the residual charge per one polyhedron (triangle or tetrahedron) decreases; (ii) volumetric expansion decreases while the degree of anisotropy in-creases weakly when the residual charge decreases; (iii)both trends (i) and (ii) are most steady within borates built by the triangles only, while the borates built by both triangles and tetrahedra show a larger scatter in values.

This study addresses the prediction of recurring failures in water supply networks, a complex and costly task, but essential for the effective maintenance of these vital infrastructures. Using historical failure data provided by Companhia de Água e Esgotos da Paraíba (CAGEPA), the research focuses on predicting the time until the next failure at specific points in the network. The authors divided the failures into two categories: Occurrences of New Faults (ONF) and Recurrences of Faults (RF). To make the predictions, they used predictive models based on Machine Learning, more specifically on MLP (Multi Layer Perceptron) neural networks. The study revealed that, by analyzing data from past failures and considering factors such as altitude, number of failures on the same street and days between failures, it is possible to achieve an accuracy greater than 80% in predicting failures within a 90-day interval. This demonstrates the feasibility of using fault history to predict future water supply outages with significant accuracy. These forecasts allow water utilities to plan and optimize their maintenance, minimizing inconvenience and losses. The article contributes to the field of water infrastructure management by suggesting that the data-driven approach can be applied in other cities or in networks of different types, such as energy or communication networks. The conclusions highlight the importance of data collection and analysis in preventing failures and optimizing water utilities’ resources.

MicroRNAs (miRNAs) are a kind of conserved small non-coding RNAs that participate in regulating gene expression by targeting multiple molecules. Early studies have shown that the expression of miRNAs changes significantly in different tumor tissues and cancer cell lines. It is well acknowledged that such variation is involved in almost all biological processes, including cell proliferation, mobility, survival and differentiation. Increasing experimental data indicate that miRNA dysregulation is a biomarker of several pathological conditions including cancer, and that miRNA can exert a causal role, as oncogenes or tumor suppressor genes, in different steps of the tumorigenic process. Anticancer therapies based on miRNAs are currently being developed with a goal to improve outcomes of cancer treatment. In our present study, we review the function of miRNAs in tumorigenesis and development, and discuss the latest clinical applications and strategies of therapy targeting miRNAs in cancer.

Unmanned aerial vehicle UAV has become an important tool for emergency communication. When disaster happens, the roads in the disaster area always are seriously damaged, and theground infrastructure communication facilities are damaged. Under emergency conditions, UAV can go into key areas as communication nodes to provide communication services for users in the area.But it's difficult for UAV to cover the entire disaster area and the efficient rescue time will be delayed. Therefore, how to make the UAV accurately perceive the regional situation and deployed in the right position is worth studying. In this paper, a virtual simulation environment is established reasonably and deep reinforcement learning algorithm is used to train UAV agents. At the same time, a series of problems such as sparse reward and long training time are still not solved in the development of reinforcement learning algorithms,and the reward function is designed to improve training efficiency. First of all, we set a specific mountain emergency communication scenario, and combined with the specific application of the UAV to carry out virtual simulation, and build a virtual environment. Furthermore, an additional shaped reward function is designed to address the sparse reward problem. Through the improvement of deep Q-learning network DQN algorithm and the reward design based on potential function, the final evaluation index is improved, and the effectiveness of the algorithm is verified. The experimental results demonstrate our work can effectively shorten the training time and increase convergencerate.

This case study examines the impact of Machico City Airport expansion on sus-tainable tourism. It aims to identify the key effects on the environment, local economy, and community, and provides recommendations for mitigating negative impacts while promoting sustainable development. The study emphasizes adopting sustainable tourism practices to protect Machico's biodiversity and natural resources, drawing from the ECOS MACHICO project. It highlights the importance of environmental education for tourists, residents, and tour operators. Community engagement emerges as pivotal, advocating for inclusive plan-ning that incorporates local perspectives. The multifaceted implications of airport expansion on Machico's socio-economic fabric are explored, balancing positive and negative effects on residents and local businesses. Diversifying tourism offerings beyond mass tourism is advocated, with a focus on preserving local traditions and promoting authentic cultural experiences. In summary, the research provides a foundation for sustainable tourism devel-opment, offering strategies applicable to similar destinations. The study's implications extend to understanding broader impacts of airport expansions, presenting avenues for further research. The proposed strategies serve as a blueprint for destinations fac-ing analogous challenges, promoting enduring socio-economic and environmental well-being.

This study examines the overall needs of the green construction scheme with ‘carbon neutrality’ as the centre in the Zhejiang provincial green development target area. By aggregating and organising the construction and development data of Zhejiang Province, the entropy weight TOPSIS model is formed according to the statistical modelling for quantitative examination of the data, and the scientific assessment scheme of ‘carbon neutrality’ in the regional construction industry of Zhejiang Province is developed. This study aids in completely exhibiting and dynamically understanding the advancement of the ‘carbon neutral’ capacity of the urban construction industry. The objective is to discover the weak link in the advancement of carbon neutrality in several regional construction industries, which is of great relevance for further examining and forecasting the strategic outlook of carbon neutrality and modifying the planning of carbon neutrality strategy in special regional construction industries.

Laser powder bed fusion (LPBF) is an additive manufacturing technique that is gaining popularity for producing metallic parts in various industries. However, parts produced by LPBF are prone to residual stress, deformation, cracks and other quality defects due to uneven temperature distribution during the LPBF process. To address this issue, in prior work, the authors have proposed SmartScan, a method for determining laser scan sequence in LPBF using an intelligent (i.e., model-based and optimization-driven) approach, rather than using heuristics, and applied it to simple 2D geometries. This paper presents a generalized SmartScan methodology that is applicable to arbitrary 3D geometries. This is achieved by: (1) expanding the thermal model and optimization approach used in SmartScan to multiple layers; (2) enabling SmartScan to process shapes with arbitrary contours and infill patterns within each layer; (3) providing the optimization in SmartScan with a balance of exploration and exploitation to make it less myopic; and (4) improving SmartScan's computational efficiency via model order reduction using singular value decomposition. Sample 3D test artifacts are simulated and printed using SmartScan in comparison with common heuristic scan sequences. Reductions of up to 92% in temperature inhomogeneity, 86% in residual stress, 24% in maximum deformation and 50% in geometric inaccuracy were observed using SmartScan, without significantly sacrificing print speed. An approach for using SmartScan for printing complex 3D parts in practice, by integrating it as a plug-in to a commercial slicing software, was also demonstrated experimentally, along with its benefits in significantly improving printed part quality.

Thermally-induced moisture flow in unsaturated soils is a complex coupled thermal-hydro process involving moisture flow both in vapor and liquid phases. Thermally-induced moisture flow in unsaturated sands is usually less pronounced than fine soils due to their low field capacity. It is affected by many factors, including soil density, particle size, moisture content, and gravity-induced flow. Besides, soil moisture sensors need to be highly accurate and calibrated for temperature effects in order to monitor the thermally induced moisture flow accurately. A silty sand with 35% non-plastic fines was selected to study the coupled thermo-hydro processes in a closed heat cell. The heat cell consists of two temperature-controlled heat exchanger plates at the top and bottom, heat flux sensors, moisture sensors, thermocouples, and heat conductivity sensors. The soil was prepared at various initial moisture content and tested under a constant 1-D temperature gradient. The soil moisture sensors were first calibrated in the test soil at room temperature and then at elevated temperatures. The soil moisture redistribution, temperature and thermal conductivity profiles were determined. The critical moisture content, corresponding to maximum moisture movement, was also determined. The results offer new insights into coupled moisture-heat flow in unsaturated sands.

The role of the microbiome in cancer and its crosstalk with the tumor microenvironment (TME) has been extensively studied and characterized. An emerging field in the cancer microbiome research is the concept of the intratumoral microbiome, which refers to the microbiome residing within the tumor. This microbiome primarily originates from the local microbiome of the tu-mor-bearing tissue or from translocating microbiome from distant sites, such as the gut. Despite the increasing number of studies on intratumoral microbiome, it remains unclear whether it is a driver or a bystander of oncogenesis and tumor progression. This review aims to elucidate the intricate role of the intratumoral microbiome in tumor development by exploring its effects on reshaping the multi-leveled ecosystem in which tumors thrive, the TME. To dissect the complexity and the multitude of layers within the TME, we distinguish six specialized tumor microenvironments, namely the immune, metabolic, hypoxic, acidic, mechanical and innervated microenvironments. Accordingly, we attempt to decipher the effects of the intratumoral microbiome on each specialized microenvironment and ultimately decode its tumor-promoting or tumor-suppressive impact. Additionally, we portray the intratumoral microbiome as an orchestrator in the tumor milieu, fine-tuning the responses in distinct, specialized microenvironments and remodeling the TME in a multi-leveled and multi-faceted manner.

Chelating gels may assist initially in root canal preparations to help establish a glide path. While irrigation surveys have investigated liquid chelators, and gels to a minor extent, no endodontic survey has focused on EDTA gels, and why clinicians use them. All 395 members of the Australian Society of Endodontology (ASE) were emailed an 11-question survey concerning chelation gel usage via Qualtrics. Paper copies were also distributed at ASE events. Descriptive statistics was performed for practitioner and chelating gel data. Cross-tabulations of practitioner type with case percentage usage of gels were analyzed with the chi square test (adjusted P value <0.0083). The overall response rate was 181/395 (46%). For 174 eligible responses, those who never/rarely used a gel was: endodontic residents 12/14 (86%), endodontists 53/71 (75%), general dentists 39/86 (45%), and other members 0% (0/3). Most gel users said that gels helped establish a glide path. Those who never/rarely used chelating gels commented that they held no benefits over liquid EDTA. Endodontists were less likely to use a chelation gel than general dentists (P <0.0083). Older members had higher gel usage than younger members (P <0.0083), indicating a possible trend to diminished gel usage over time amongst ASE members.

(S)-1-Methyl-2-oxoimidazolidine-4-carboxylic acid 1 is an analog of (S)-pyroglutamic acid, a key component of naturally occurring peptide hormones and synthetic pharmaceutical candidates. Reaction of (S)-2-amino-3-(methylamino)propionic acid with COCl2 and aqueous NaHCO3 followed by ion exchange afforded 1, which was recrystallized from acetonitrile and then characterized by IR, 1H NMR, 13C NMR, polarimetry, elemental microanalysis, high resolution mass spectrometry and single crystal X-ray diffraction. The acid 1 crystallized in the orthorhombic chiral space group P212121 with cell constants a = 6.2275(4) Å, b = 8.3963(5) Å, c = 24.9490(14) Å. The X-ray crystal structure reveals that two distinct conformers of 1 occur at alternating positions within helices which are supported by hydrogen-bonding. Each molecule of 1 is linked to its two neighbors in the helix by a total of three hydrogen bonds and four molecules of 1 are contained within each turn of the helix. The pattern of hydrogen bonds illustrates a preference for the carboxylic acid group to act as a hydrogen bond donor and for the urea unit to be a hydrogen bond acceptor.

Heritage bridges constitute an integral feature of the urban landscape in numerous cities. However, it is common for these structures to surpass their life cycle, rendering them ill-equipped to withstand the dynamic demands of users and extreme events, particularly hydrological occurrences. This research presents a methodology for the assessment of heritage riverine bridges, with a focus on the Grau Bridge in Peru as a case study. The investigation commences with an exhaustive literature review, complemented by a historical examination, followed by a preliminary diagnosis. Subsequently, hydrological and hydraulic studies are conducted, encompassing drone surveys of the riverbed and the bridge, soil analyses, and the application of 1D and 2D models in HEC-RAS. The outcomes of this comprehensive analysis reveal the high vulnerability of the Grau Bridge. Finally, strategic recommendations for its conservation are recommended.

Background: Patients undergoing brain tumor resection experience changes to their neurocognitive abilities, many of which can be difficult to predict. We hypothesized that changes in brain connectivity could predict changes in neurocognitive functioning, demonstrating the potential for brain connectivity aware surgical planning to provide enhanced outcomes for patients. Methods: Patients underwent functional and diffusion MR scanning and neuropsychological testing before tumor resection and two weeks post-resection. Using this functional and diffusion imaging, we measured changes in the topology of the functional and structural graph networks, respectively. From the neuropsychological testing scores, we derived a composite score that describes a patient’s overall level of neurocognitive functioning. We then used a multiple linear regression model to test if structural and functional connectivity measures could predict changes in composite scores. Results: Twenty-one subjects completed imaging and neuropsychological evaluation both before and after surgery. The multiple linear regression model showed that changes in functional local efficiency were inversely correlated with changes in composite score (p

Recently, due to the decrease in labor force, increase in labor costs, and the desire for improved quality of life, research on robots has been actively conducted to address these issues. However, it is currently difficult to find robots that physically interact with humans. The reason is that the actuators of robots do not have high torque density on their own. To solve this problem, high torque density motors, such as proprioceptive actuators, are being researched. However, the torque density is still insufficient for physical interaction with humans, so we have developed a motor with higher torque density. However, high torque density motors have the disadvantage of lower speed characteristics due to increased Back-EMF. Therefore, to address the deterioration of speed characteristics in the developed motor, we applied the Independent 3-Phase winding structure to improve the speed characteristics. Consequently, through comparison with Y-Connection and Delta-Connection, we propose the most suitable winding structure for high torque density motors intended for physical interaction with humans.

In the current complex and uncertain macroeconomic situation, improving the inherent resilience of the new energy vehicle industry chain is the key to effectively addressing various risks and challenges, and achieving dynamic balance between high-quality industrial development and industrial chain security. Based on the basic concept of resilience and the actual situation of new energy vehicle industry chain development, this study constructs a comprehensive evaluation index system for the resilience of the new energy vehicle industry chain, which includes four dimensional first-level indicators of coping resistance, adaptive resilience, autonomous control and leading competitiveness. In addition, it is measured by combining the data related to the new energy vehicle industry chain in Changzhou City. Our study shows that the situation on the new energy vehicle industry chain is complicated, and the comprehensive evaluation index system is more favorable for evaluating its resilience level.

Most common classifications for acetabular bone defects are based on radiographic two-dimension imaging, with low reliability and reproducibility. With the rise of modern processing techniques based on 3D modelling, methodologies for volumetric quantification of acetabular bone loss are available. Our study aims to describe a new methodology for quantitative assess-ment of acetabular defects, based on 3D modelling, focused on the surface analysis of the integrity of the main anatomical structures of the acetabulum represented by four corresponding sectors (posterior, superior, anterior, and medial). The defect entity is measured as the Area Increase Ra-tio (AIR) detected in all the sectors analyzed on three planes of view (frontal, sagittal and axial) compared to healthy hemipelvises. The analysis was performed on 3D-models from the CT-scan of six exemplary specimens with a unilateral pathological hemipelvis. AIR between the native and the pathological hemipelvis was calculated for each sector, for a total of 48 analysis (range, +0.93% - +171.35%). AIR of >50% were found in 22/48(45.8%) sectors and affected mostly the posterior, medial and superior sectors (20/22, 90.9%). Qualitative analysis showed consistency of the data with the morphological features of the defects. Further studies with larger samples are needed to validate the methodology and potentially develop a new classification scheme.

Since 2015, the invasive alga Rugulopteryx okamurae has triggered the most serious marine macrophyte invasion in Europe. The removal of its huge coastal biomass generates health problems, strong odors, impact on tourism and high clean-up costs. As a circular economy strategy we propose composting with native terrestrial isopods that has not been previously tested. Therefore, specimens of Porcellio laevis were captured in urban parks and kept for 5 years in terrariums with adequate humidity and temperature control. A sample of 150 adult specimens was divided into six batches of 25 animals. Three batches were fed with organic household waste (control) and three with a 50% diet of waste and algae (treatment). P. laevis consumed up to 1.5 times their weight per day on the algae diet with little or no weight loss, but there was high mortality in both mancas and adults. However, the results are promising and we propose to encourage research with isopods because of their great voracity, high prolificacy and rusticity for the recycling of invasive algae. It should be explored in further work what percentage of R.okamurae avoids mortality by the diterpenes of the algae.

In the paper, the author presents explicit and unified expressions for a sequence of improper integrals in terms of the beta functions and the Wallis ratios. Hereafter, the author derives integral representations for the Catalan numbers originating from combinatorics.

Pancreatic ductal adenocarcinoma (PDAC) remains one of the most lethal malignancies, characterized by its aggressive progression and dismal prognosis. Advances in epigenetic profiling, specifically DNA methylation analysis, have significantly deepened our understanding of PDAC pathogenesis. This review synthesizes findings from recent genome-wide DNA methylation studies, notably those by Espinet et al. and Wang et al., which have delineated a complex DNA methylation landscape differentiating between normal and cancerous pancreatic tissues, as well as across various stages and molecular subtypes of PDAC. These studies identified specific differentially methylated regions (DMRs) that not only enhance our grasp of the epigenetic drivers of PDAC but also offer potential biomarkers for early diagnosis and prognosis, enabling the customization of therapeutic approaches. The review further explores how DNA methylation profiling could facilitate the development of subtype-tailored therapies, potentially improving treatment outcomes based on precise molecular characterizations. Overall, leveraging DNA methylation alterations as functional biomarkers holds promise for advancing our understanding of disease progression and refining PDAC management strategies, which could lead to improved patient outcomes and a deeper comprehension of the disease’s underlying biological mechanisms.

Lean practice is recognised for having a great potential in promoting safety risk management in offsite construction (OSC). This paper presents results of a study conducted to assess the impact of lean practice in safety risk management in OSC in a developing country. A quantitative approach using survey-based questionnaire was adopted. Lean management practices (LMPs) identified from literature review were empirically tested using a sample survey of 103 OSC contractors. The survey responses were subjected to descriptive and inferential statistics. The top ranked LMPs for safety risk management in OSC included two mistake proofing practices, i.e., use of personal protective equipment (PPE) and use of hazard warning equipment; two last planner system (LPS) practices, i.e., involvement of workers in safety planning and providing necessary working equipment and one first run studies (FRS) practice, i.e., critical analysis of work methods. These LMPs are useful in controlling high consequence safety risks in OSC. Based on evidence found in this study, the paper argues that lean practice can bring great value in the safety risk management in OSC in countries where OSC is transitioning.

The inclusion of active materials in 3D-printed objects presents many potential applications in a variety of fields, including medicine and agriculture. Through a new three-phase coating system, we fabricate 3D objects that are printed via fused deposition modeling (FDM), with embedded functional materials. The method, namely Continuous Material Deposition on Filaments (CMDF) is based on passing a filament through a solution in which the functional substance is dissolved together with the polymer from which the filament is made. As model cases, three different types of materials were tested, Rhodamine B, ZnO nanoparticles (NPs), and Ciprofloxacin (Cip) while dissolved or dispersed in a PLA-containing solution. It was found that the properties of the coating materials are not affected by the coating and printing steps and they are maintained on the surface of the printed structure. This enabled, for example, achieving an antibacterial activity by the ZnO NPs and the controlled release of the antibiotics, Cip. Since the approach does not alter the mechanical properties of the printed structures, it offers a simple and convenient method for the introduction of a wide range of materials into 3D-printed objects.

Obesity is a chronic disease that is rapidly increasing in prevalence and affects more than 600 million adults worldwide, and this figure is estimated to increase by at least double by 2030. In the United States, more than one-third of the adult population is either overweight or obese. The global obesity epidemic is a major risk factor for the development of life-threatening arrhythmias occurring in patients with long QT, particularly in conditions where multiple heart-rate-corrected QT-interval-prolonging mechanisms are simultaneously present. In obesity, excess dietary fat in adipose tissue stimulates the release of immunomodulatory cytokines such as interleukin (IL)-6, leading to a state of chronic inflammation in patients. Over the last decade, increasing evidence has been found to support IL-6 signaling as a powerful predictor of the severity of heart diseases and increased risk for ventricular arrhythmias. IL-6’s pro-inflammatory effects are mediated via transsignaling and may represent a novel arrhythmogenic risk factor in obese hearts. The first selective inhibitor of IL-6 trans-signaling, olamkicept, has shown encouraging results in phase II clinical studies for inflammatory bowel disease. Nevertheless, the connection between IL-6 trans-signaling and obesity-linked ventricular arrhythmias remains unexplored. Therefore, understanding how IL6 trans-signaling elicits a cellular pro-arrhythmic phenotype and its use as an anti-arrhythmic target in a model of obesity remain unmet clinical needs.

Obesity is a major risk factor for the development of life-threatening malignant ventricular tachyarrhythmias (VT) and sudden cardiac death (SCD). Risks may be highest for patients with high levels of the proinflammatory cytokine interleukin (IL)-6. We used our guinea pig model of high-fat diet (HFD) induced Ventricular arrhythmias, that exhibit heightened proinflammatory-like pathology which is also observed in human obesity VT, as well as immunofluorescence, and confocal microscopy approaches to evaluate the pathological IL-6 trans-signaling function and explore the underlying mechanisms. Using blind-stick and electrocardiogram (ECG) techniques, we tested the hypothesis that heightened IL-6 trans-signaling exhibit enhanced Ventricular arrhythmias /SCD incidence and underlying arrhythmia substrates. Remarkably, compared to low-fat (LFD) diet fed controls, HFD promotes phosphorylation of the IL-6 signal transducer and activator of transcription 4 (STAT4) leading to its activation and enhanced nuclear translocation of pSTAT4/STAT4 more than LFD controls and pSTAT3/STAT3 nuclear expression. Overactivation of IL-6 trans-signaling in guinea pigs prolonged the QT interval that resulted in greater susceptibility to VT/SCD with isoproterenol challenge, as also observed with the downstream Janus kinase (JAK) 2 activator. These findings may have potentially profound implications for more effective VT therapy in the vulnerable obese patient population.

We evolve our past models PYR, Loukeris, et al. (2016) to provide a competitive system whose infiltration of categorical information and fundamentals into advanced higher moments, supports a more objective Portfolio Selection, aided by Intelligent Computing. The system of Portfolia Yield Reactives (PYR) searches for hidden prototypes into big data of accounting and financial statements, restricting malicious patterns such as hoax, noise, manipulation, incorporated to a novel optimal portfolio selection method.

Health care in Canada is managed by provinces/territories. We investigated regional differences in survival among Canadians diagnosed with central nervous system (CNS) tumours. We identified 50,670 patients diagnosed with a first-ever primary CNS tumour between 2008 and 2017 with follow-up until December 31, 2017. We selected the four highest incidence histologies and used proportional hazards regression to estimate hazard ratios (HRs) for five regions (British Columbia, Prairie provinces, Ontario, Atlantic provinces and the Territories), adjusting for sex, tumour behaviour and patient age. Ontario had the best survival profile for all histologies investigated. The Atlantic provinces had the highest HR for glioblastoma (HR=1.26, 95% CI:1.18-1.35) and malignant glioma not otherwise specified (NOS) (Overall: HR=1.87, 95% CI:1.43-2.43; Pediatric population: HR=2.86, 95% CI:1.28-6.39). For meningioma, the Territories had the highest HR (HR=2.44, 95% CI:1.09-5.45) followed by the Prairie provinces (HR=1.52, 95% CI:1.38-1.67). For malignant unclassified tumours, the highest HRs were in British Columbia (HR=1.45, 95% CI:1.22-1.71) and the Atlantic provinces (HR=1.40, 95% CI:1.13-1.74). There are regional differences in the survival of CNS patients at the population level for all four specific histological types of CNS tumours investigated. Factors contributing to these observed regional survival differences are unknown and warrant further investigation.

Abstract—Hydraulic switching actuators are high efficiency, fast response, and low cost solutions for hydraulic control systems. One of the challenging problems is throttling losses during valve transitions. Previously the authors proposed a zero-flowrate switching method to reduce throttling energy loss of the switching valve, where a hydraulic resonator is applied to make the flowrates through the lines approaching zero before the valves are switched off. The major challenge of this approach is fast switching valves whose transition times are less than 2 ms. In this paper, an improved zero-flowrate switching method is presented. It utilizes the capacity with independent inlet/outlet ports to regulate flowrates through the lines. Models of capacity applied in a simple line with different pressure signals are developed to explore characteristics of the capacity, based on which a complete actuation system is developed. In the complete model, resistance and inductance are optimized to achieve desired flowrate response. The improved zero-flowrate switching method reduces throttling energy losses by 99.945% compared to a hard switching system. The simulation results demonstrated that the improved zero-flowrate switching method performs as expected in the design condition. A capacity with proper volume is able to regulate flowrates through all the lines to zero, with the help of appropriate resistance and inductance. Compared to previous zero-flowrate switching method, the novel strategy allows slower switching valves applied in hydraulic actuation systems and achieves better efficiency performance. This research paves a new avenue for reducing throttling energy losses and improves system efficiency in hydraulic switching actuators, as well as most of the hydraulic switch-mode circuits.

The significance of Kashmir conflict as one of the world’s longest running conflicts has frequently drawn the attention of both communication and international relations’ scholars which makes it an important issue from the perspective of interdisciplinary approach. The researchers have attempted to assemble a brief history of the Indian held Jammu and Kashmir Conflict from the time of partition in 1947 to the developments which took place till 2019 in the light of the available literature. The paper provides substantial historical context of the important events like instrument of accession, UN resolutions on Kashmir conflict, Simla Accord, Gawkadal Massacre , Lahore Declaration, Kargil War, killing of Burhan Wani, Uri attack and Article 370’s abrogation .

Based on the minimum conduction band edge caused by the minimum channel potential resulting from the quasi-3D scaling theory and the 3D density of state (DOS) accompanied by the Fermi-Dirac distribution function on the source and drain sides, a unified semiconductor-device-physics-based ballistic model is developed for the threshold voltage of modern multiple-gate (MG) transistors, including FinFET, W-gate MOSFET, and Nanosheet (NS) MOSFET. It is shown that the thin silicon, thin gate oxide, and high work function will alleviate the ballistic effects and resist the threshold voltage degradation. Besides, as the device dimension is further reduced to give rise to the 2D/1D DOS, the lowest conduction band edge is hence increased to resist the threshold voltage degradation. The nanosheet MOSFET exhibits the largest threshold voltage among the three transistors due to the smallest minimum conduction band edge caused by the quasi-3D minimum channel potential. Compared to P-type MOSFET (P-FET), the N-FET shows more threshold voltage because the electron has a more effective mass than the hole

Almost contact complex Riemannian manifolds, known also as almost contact B-metric manifolds, are equipped with a pair of pseudo-Riemannian metrics that are mutually associated with each other using the tensor structure. Here we consider a special class of these manifolds, those of the Sasaki-like type. They have an interesting geometric interpretation: the complex cone of such a manifold is a holomorphic complex Riemannian manifold (also called a Kähler–Norden manifold). The basic metric on the considered manifold is specialized here as a soliton, i.e. has an additional curvature property such that the metric is a self-similar solution of an intrinsic geometric flow. Almost solitons are more general objects than solitons because they use functions rather than constants as coefficients in the defining condition. A β -Ricci-Bourguignon-like almost soliton ( β is a real constant) is defined using the pair of metrics. The introduced soliton is a generalization of some well-known (almost) solitons (such as those of Ricci, Schouten, Einstein), which in principle arise from a single metric rather than a pair of metrics. The soliton potential is chosen to be pointwise collinear to the Reeb vector field, or the Lie derivative of any B-metric along the potential to be the same metric multiplied by a function. The resulting manifolds equipped with the introduced almost solitons are characterized geometrically. Appropriate examples for two types of almost solitons are constructed and the properties obtained in the theoretical part are confirmed.

The notion of Critical Point Theory has extensive application in the filed of Partial Differential Equations, one of which is studying the existence and commenting on the uniqueness and multiplicity (in case when the solution is not unique) of weak solutions to Elliptic PDEs under certain boundary conditions.\par This article provides a brief survey about specific concepts like : differentiation on Banach Spaces, maxima and minima and its applications to PDEs. Furthermore, we've discussed the notion of defining a weak topology on Banach Spaces, before introducing the Variational Principle and its applications.\par The epilogue of the article primarily deals with results which studies the existence of weak solutions to Dirichlet Boundary Value Problems under specific conditions. The most notable aspect of this article is the proof of \textit{Rabinowitz's Saddle Point Theorem} using the method of \textit{Brouwer Degree}. Readers who are highly motivated in pursuing research in any of the topics relevent to the contents of this paper will surely find the \texttt{References} section to be extremely resourceful.

This brief report presents a comparative analysis to examine differences in the mean dose of nitrate supplementation between studies with positive and negative results on exercise performance. Protocols of at least six days that had positive results used lower nitrate doses (~7.7 mmol), whereas those with negative results used higher doses (~10.2 mmol), showing a statistically significant difference (p < 0.05). These findings suggest long-term supplementation with higher doses (~10.2 mmol) may not improve exercise performance. Further research is essential to understand the underlying mechanisms.

Tunicate orthologs in the human genome comprise just 84 genes of the 19,872 protein-coding genes, yet they stand at the base of the Olfactores clade - which radiated to generate thousands of tunicate and vertebrate species. What were the powerful drivers among the 84 that enabled this process? Many of these orthologs are present in gene families. We discuss the biological role of each family and the orthologs’ quantitative contribution to the family. Most important was the evolution of a second type of cadherin. This, a Type II cadherin, had the property of detaching the cell containing that cadherin from cells that expressed the Type I class. The set of such Type II cadherins could now detach and move away from their Type I neighbours, a process which would eventually evolve into the formation of the neural crest, “ the fourth germ layer”, providing a wide range of possibilities for further evolutionary invention. A second important contribution were key additions to the broad development of the muscle and nerve protein and visual perception tool-kits. These developments in mobility and vision provided the basis for the development of the efficient predatory capabilities of the Vertebrata.

Spontaneous, unwilled subjective imagery and symbols often emerge in psychotherapy that can appear baffling and confound interpretation. Moreover, early psychoanalytic theories seemed to diverge as often as they agreed on the meaning of such content. Nevertheless, reviewing key findings in the empirical science of spontaneous thought, as well as insights gleaned from neurosciences and especially embodied cognition, it is now possible to construct a more coherent theory of interpretation that is clinically useful. Given that thought is so thoroughly embodied, it is possible to demonstrate that universalities in human physiology yield universalities in thought. Such universalities can then be demonstrated to form a kind of biologically directed universal “code” for understanding spontaneous symbolic expressions that emerge in psychotherapy. An example is given that illustrates how this can be applied to clinical encounters.

Climate change, recognized as a global crisis, is not only altering our environment but also significantly impacting human health. Particularly, its influence on non-communicable diseases (NCDs), a leading cause of global mortality, is becoming increasingly evident yet underexplored. This review aims to synthesize current research on the impact of climate change on NCDs, addressing a critical gap in our understanding of how environmental changes affect human health. We examine the complex interplay between climate change and NCDs, drawing insights from recent studies that highlight the adverse effects of climate variables on chronic diseases, such as cardiovascular and kidney diseases, and the role of food and nutrition security in this nexus. Furthermore, the review explores the disproportionate impact on vulnerable regions and populations, particularly in Pacific Island countries and territories, underscoring the urgent need for context-specific solutions and a cross-sectoral approach. By integrating findings from various disciplines, this review aims to inform policy and public health interventions, highlighting the necessity of collaborative efforts to mitigate the burgeoning burden of NCDs in a rapidly changing climate.

Let a,b,c be positive integers such that a²+b²=c², 2|b,gcd(a,b)=1. In 1956, Jesmanowicz conjectured that for any positive integer w, the only solution of (aw)^x+(bw)^y=(cw)^z in positive integers is (x, y, z) = (2, 2, 2). In this paper, based on Gaussian integer ring, we show that Je$\acute{s}$manowicz' conjecture is true for any positive integer

Based on economic feasibility, renewable generators can use pumped hydro storage (PHS) to improve their profitability by performing energy arbitrage under real time pricing (RTP) schemes. In this paper, we present a new method to optimise the size and manage utility-scale wind-PV systems using PHS with energy arbitrage under RTP. The storage in the PHS is used to supply load consumption and/or energy arbitrage. Further, both load supply and power-generating systems are considered, and a genetic algorithm metaheuristic technique is used to perform the optimisation efficiently. Irradiance, wind speed, temperature, hourly electricity price, component characteristics, and financial data are used as data, and the system is simulated in 15 min time steps during the system lifetime for each combination of components and control variables. Uncertainty is considered for the meteorological data and electricity prices. The pump and turbine efficiencies and available head and penstock losses are considered as variables (not fixed values) to obtain accurate simulations. A sample application in Spain is demonstrated by performing a sensitivity analysis of different locations, electricity prices, and costs. The PHS is not worth considering with the present cost of components.

Agro-waste fibres for polymer composite reinforcement have gained increased interest in industry and academia as a more sustainable alternative to synthetic fibres. However, natural fibre composites (NFC) hygroscopicity is still an issue that needs to be solved. This work investigates how prolonged exposure to water affects the properties of the polypropylene (PP)--based injection moulded composites reinforced with different contents of rice husk (rh) and olive pit (op) fibres. Both rh and op composites became more hydrophilic with increased fibre charge due to the affinity of cellulose and hemicellulose OH groups. Meanwhile, lignin contributes to the protection of the composites from thermo-oxidative degradation caused by water immersion. The PPrh composites had a higher saturation water content of 1.47% (20 wt.% rh) and 2.38 (30 wt.% rh) in comparison to PPop composites with absorption of 1.13% (20 wt.% op) and 1.59% (30 wt.% op). Tensile elastic modulus has slightly increased, at the cost of increased saturated composites' rigidity, in composites with 30% rh and op fibre content (up to 13%) while marginally decreasing (down to 8%) in PP30%op compared to unsaturated counterparts. A similar trend was observed for the flexural modulus, enhanced up to 18%. However, rh and op composites with 30% fibre content ruptured in bending, highlighting their fragility after hydrolytic ageing.

In graduate programs such as social work, field education is the signature pedagogy of education. As such, student placement with an appropriate field education agency is critical to ensure academic success and career readiness. A variety of Learning Management System (LMS) and Integrated Planning and Advising Service (IPAS) technologies have been developed to fully integrate technology into the educational system and streamline and improve the learning experience for students, educators, and administrators. Few (if any) of the existing solutions have capabilities to match students with field educators on the basis of an individual student’s completed coursework and area of specialization, as well as field educator needs and opportunities. This paper describes our experience developing a custom LMS/IPAS system—the School of Social Work information System (SSWiS)—that was designed specifically for student learning, faculty advising, and academic administration within our social work graduate program. We present the challenges that motivated the design of the SSWiS before describing the architecture and functionality of our solution. We then discuss our preliminary evaluation results. We conclude with a discussion of the benefits and limitations of our system in the context of today’s technical needs in graduate education in social work and other fields.

Waterbomb structures are origami-inspired deformable structural components used in new types of robots. They have a unique radially deployable ability that enables robots to better adapt to their environment. In this paper, we propose a series of new waterbomb structures with square, rectangle, and parallelogram base units. Through quasi-static axial and radial compression experiments and numerical simulations, we prove that the parallelogram waterbomb structure has a twist displacement mode along the axial direction. Compared with the square waterbomb structure, the proposed optimal design of the parallelogram waterbomb structure reduces the critical axial buckling load-to-weight ratio by 55.4% and increases the radial stiffness-to-weight ratio by 67.6%. The significant increase in the radial stiffness-to-weight ratio of the waterbomb structure and decrease in the critical axial buckling load-to-weight ratio make the proposed origami pattern attractive for practical robotics applications.

A novel means of applying radiotherapy in cancer treatment is the application of the radiation dose at a very high intensity for a very short time, FLASH radiotherapy (FLASH-RT). This technique involves exposure of tumors to >40 Gy/s, usually for less than one second. Studies conducted in cell and preclinical models suggest that FLASH-RT seems less damaging to normal tissues from adverse effects, relative to the same overall dose of radiation administered in conventional therapy (CONV-RT) which involves administration of lower levels of radiation repeated intermittently over a protracted period. In contrast, the susceptibility of tumor tissues to FLASH-RT is not diminished relative to CONV-RT. Within solid tumors both modes of dispensation of radiation produce an equivalent degree of cell damage. This differential between normal and malignant material has been found in isolated tissues, animal studies, and more recently in clinical trials. However, the classical radiation concept is that high energy linear transfer radiation (LET) is more damaging than the equivalent total dose of low LET. Thus, the susceptibility of cells should be greater to short-term exposure to high LET. This article discusses the potential reasons that may account for this discrepancy. While the relative protection given to untransformed tissues by FLASH-RT relative to tumor tissue is a major step forward in radiation therapy of cancer, the processes that lie behind this phenomenon are incompletely understood and are considered here.

The construction industry, a vital sector of the global economy, is projected to grow significantly over the next 15 years. Despite its importance, this industry struggles with inefficiency, high costs, prolonged timelines, and substantial ecological impacts. These challenges have led governments to advocate for Building Information Modeling (BIM) to enhance Efficiency and sustainability through comprehensive digital representations of physical and functional characteristics. The effective integration of BIM technology hinges on the active participation of industry providers, raising the question of how these providers can positively contribute to improving BIM dimen-sions. This study investigates the potential of coopetition networks within the Portuguese Orna-mental Stone industries (OS-PT) to address this challenge. Coopetition networks, which blend competition and cooperation, foster collaborative networks among companies to enhance their re-sponse to digital supply chains. The research employs an Experimental Pilot Network facilitated by an Industrial Internet of Things (IIoT) artefact to assess the benefits of coopetition networks. The findings demonstrate that transitioning from current practices (CB.P) to coopetition network practices (CN.P) significantly improves operational Efficiency, labour productivity, and sustaina-bility. Specifically, the transition resulted in a 15.6% increase in on-time delivery performance, a 27.38% improvement in labour productivity, and a 21.8% reduction in CO₂ emissions per part produced. These improvements align with Sustainable Development Goals (SDGs) 8, 9, 11, and 13, highlighting the strategic value of coopetition in driving innovation and sustainability in the construction industry. Future research should explore the scalability of these findings across different sectors and further refine methodologies to maximize the benefits of coopetition net-works.

There has been a growing awareness of the need to implement environmentally friendly operations in the hotel industry, but most studies focus on guest behaviors. Only a few studies investigate employees’ willingness to comply with hotels’ green practices. This study seeks to further the investigation from the human resource perspective. Using alumni from a tourism and hospitality programs, this study collected 233 responses. The study hypothesizes that the employees’ green ability consisting of environmental awareness, environmental knowledge, and environmental skill creates a positive impact on hotels’ green ability. The results indicate that employees contribute approximately a fifth of hotels’ ability to implement greener practices.