This paper presents a comprehensive cost-benefit analysis of producing alternative phosphorus (P) fertilizers from recycled water treatment residuals (Fe-WTR) and cowshed effluents, under the umbrella of circular economy approach. Fe-WTR is compared to a synthetic adsorbent, layered double hydroxide (LDH). Dairy wastewater is used as a P source for both adsorbents. The cost of 1 ton P-Fe-WTR sums up to 329 Euro. In contrast, the use of synthetic adsorbents (P-LDH) incurs significantly higher costs, amounting to 3329 Euros per ton, underscoring the economic advantage of utilizing waste-derived materials. Adopting Fe-WTR fertilizer not only offers substantial cost savings by avoiding landfill fees (40-150 Euros per ton) and wastewater discharge fines (500 Euros per ton) but also reduces environmental impacts. This sustainable method mitigates eutrophication and pollution, presenting a dual benefit of cost-effectiveness and environmental protection. Although our results are based on a specific case study, they reflect the potential value of extending the circular economic approach to P production worldwide: Recycling P from waste streams can be economically viable and environmentally preferable at large, aligning with global sustainability goals and demonstrating the practicality of circular economy principles in environmental management.

Self-healing materials research spans many academic disciplines and employs a wide range of methodologies. Some of the developed concepts are driven by the direct application of the materials. However, a deeper understanding of the basic mechanisms and principles of self-healing materials is still a challenging aim. Nature has mostly served as an inspiration for the development of new self-healing materials, and it will undoubtedly continue to be a significant source of inspiration for the creation of novel ideas. This review encompasses the principles of self-healing mechanisms based on the concepts of autonomous and non-autonomous procedures. Studies based on smart composite materials with autonomous self-healing properties are also included and discussed from two aspects of intrinsic or extrinsic abilities, taking into consideration their components and structures as well as the design of these composites. Finally, special attention is given to the application of the materials in several fields such as aerospace, automotive, marine, energy, medical and healthcare, military, and construction.

Autism Spectrum Disorder (ASD), a neurodevelopmental disorder, is increasingly diagnosed and significantly affects communication, behavior, and social interaction. The current diagnostic framework, guided by the DSM-5, has limitations that may lead to clinical gaps due to overlapping symptoms of ASD and other disorders. This study proposes a comprehensive approach to enhance ASD diagnosis through clinical stratification based on comorbidities. We applied precision medicine techniques to identify and categorize ASD into ten clinical profiles. Our findings contribute to a more profound understanding of ASD, including its varied clinical manifestations and comorbidities, and facilitate the development of personalized therapeutic strategies.

Trade-offs in ecosystem services (ES) manifest when the enhancement of one service leads to the diminishing of another. These trade-offs pose a notable challenge, impacting the sustainability of particular socio-ecological systems peri-urban landscapes (PULs). This issue arises from the dynamic processes associated with peri-urbanization, posing threats to natural ecosystems and their services in peri-urban areas. Additionally, the escalating demand for ecosystem services in PULs contributes to these trade-offs. Policy making and planning concerning ecosystem ES trade-offs in PULs should prioritize the promotion of a balance between conflicting services and foster synergies among them. However, it is noteworthy that ES trade-offs in PULs are not given high priority on policy and planning agendas. Knowledge regarding policy development and planning for ES trade-offs in PULs often remains concealed within specific country and regional case studies. Consequently, this research seeks to characterize the ES trade-offs in the selected PUL case studies, with the objective of identifying potential commonalities among them. Furthermore, the study aims to identify: (i) the factors driving ES trade-offs, (ii) challenges pertaining to how policy-making and planning address ES trade-offs in PULs, and (iii) recommendations for enhancing governance practices to better manage peri-urban ES trade-offs. We designed a semi-quantitative survey and collected information about 23 different case studies, located across the world. Answers from this survey were analyzed with the help of Principal Component Analysis approach. The results showed that the most common trade-off occurred between “cultural and provisioning” and “regulating and provisioning” ES. It was found that urban development is the basic driver behind emerging of the examined trade-offs. To tackle this issue at the governance level, the study recommends establishing mechanisms to facilitate collaboration among stakeholders. This should be accompanied by robust dissemination efforts and the promotion of awareness among actors regarding the fundamental concepts of ES and PULs.

Plant-microbe interactions are essential for ecosystem health and agricultural productivity. Metabolomics has revolutionized our understanding of these interactions by providing powerful methods to decipher the complex chemical signals involved. This review highlights the various metabolomics techniques used to study plant-microbe interactions, such as mass spectrometry, nuclear magnetic resonance spectroscopy, and advanced imaging technologies. We also discuss the role of contemporary bioinformatics tools, extensive databases, and the increasing influence of artificial intelligence and machine learning in the analysis of metabolomics data. Integrating metabolomics with other omics fields, including transcriptomics, proteomics, and metagenomics, allows for a comprehensive understanding of the molecular mechanisms underlying plant-microbe interactions. The review emphasizes the significance of fluxomics in elucidating the dynamic nature of metabolic networks. While there are challenges in data analysis, integration, and interpretation, metabolomics has profoundly expanded our knowledge of the role metabolites play in shaping plant-microbe interactions. As metabolomics technologies advance and integrate further with other omics approaches, we anticipate groundbreaking discoveries that will provide deeper insights into these complex interactions, ultimately leading to innovative strategies for sustainable agriculture and biotechnology.

Digital transformation process gained significant research interest over the past years especially when related with achievements in sustainability goals. Even though there exist growing research regarding various aspects of digital transformation and sustainability procedure, a more detailed analysis is needed in different national environments. Proposed study empirically analyzes the Greek managers’ perspective for the relationship between digital management intensity and environmental performance. Almost 60 Greek senior managers from various organizational sectors were interviewed, while a synthetic index already developed from previous studies was used. Results indicate that Greek companies are not fully exploit digital technologies to further develop their environmental practices. Digital transformation strategy is contributing effectively to environmental strategies in the case of reducing emissions of waste and avoid environmental accidents, while in the rest of cases emerging technologies play a less important role and not as a part of an holistic digital strategy.

There has been debate recently on how the population in traditional mining areas of Central and Eastern Europe face precarity and marginalization. A spatial approach was employed in a Romanian context using available statistical data on a south Carpathian area (i.e Gorj County), surveys and in-depth interviews with residents in one of the rural communities of Gorj. Our findings highlight that a large number of rural localities in this county are technically, economically, and socially underdeveloped. Many inhabitants face a lack of financial resources and employment opportunities, which has led to the emigration of young people to larger Romanian cities or to other countries. We conclude that in order to avoid a much deeper social and spatial marginalization of local inhabitants, an integrated strategy is needed to target economic and social development, investment in infrastructure and public services, the promotion of employment and training opportunities, and to better integrate local culture and traditions into tourism.

Convolutional neural networks (CNNs) face challenges in capturing long-distance text correlations, and Bidirectional Long Short-Term Memory (BiLSTM) networks exhibit limited feature extraction capabilities for text classification of work order. To address the abovementioned problems, this work utilizes an ensemble learning approach to integrate model elements efficiently. This study presents a method for classifying work order texts using a hybrid neural network model called BERT-BiLSTM-CNN. First, use Bert for preprocessing to obtain text vector representations. Then, capture context and process sequence information through BiLSTM. Next, capture local features in the text through CNN. Finally, obtain classification results through Softmax. Through comparative analysis, the method of fusing these three models is superior to other hybrid neural network model architectures in multiple classification tasks. It has a significant effect on work order classification.

Supply chain transparency and traceability have become increasingly important in today's globalized and interconnected business environment. This qualitative research explores the challenges and perspectives of industry practitioners regarding supply chain transparency and traceability. Drawing on semi-structured interviews with a diverse group of supply chain professionals, the study identifies key themes including difficulties in achieving visibility beyond immediate suppliers, data fragmentation and inconsistency, barriers to technology adoption, regulatory compliance, cultural and organizational factors, impacts on supplier relationships, and the influence of the COVID-19 pandemic and sustainability goals. The findings highlight the complex nature of these challenges and the need for collaborative, multi-stakeholder approaches to address them effectively. Despite the challenges, the study also reveals the potential benefits of transparency and traceability for enhancing supply chain resilience, sustainability, and stakeholder trust. Moving forward, companies must leverage technological innovations, establish clear communication channels with suppliers, navigate regulatory complexities, and foster a culture of transparency and accountability within their organizations. Future research should focus on practical strategies for implementing transparency and traceability initiatives, as well as evaluating their impact on supply chain performance and sustainability outcomes.

The aim of this study was to develop a ready-to-eat vegetable-herb mixes with high nutritional and sensory values, as well as good storability. In this regard the suitability of fresh herbs (peppermint, oregano, green basil, red basil, and parsley) was tested for use in mixes with fresh-cut iceberg lettuce. Lettuce-herb mixtures were stored for 6 days at 5°C. The reason for the decrease in the appearance of the salads was the browning of the cut surface of the lettuce, as well as discoloration on the cut herbs. Comparing the storage ability of cut herbs, red basil and parsley retained the best appearance for 6 d at 5 °C. A small addition of herbs to fresh-cut iceberg lettuce caused a significant increase in contents of pro-health ingredients in the mixes. There were large discrepancies in the sensory quality of the mixes, but the highest quality and consumer acceptance were found for salads with parsley (5% and 10%) and red basil (5%). After harvest, the fresh herbs were more contaminated by molds than the iceberg lettuce. Bacterial, yeast and mold contamination increased during storage, but the rate of mold growth was much lower in the mixes with parsley compared to lettuce alone.

Habenaria, a member of Orchidaceae family is the cosmopolitan distributions, which has significant medicinal and ornamental values. Regardless of morphology and molecular data that have been studied in recent times, the phylogenetic relationship is still under debate. Here, we sequenced, assembled, and annotated the whole chloroplast (cp) genome of two species (Habenaria aitchisonii Rchb.f. and Habenaria tibetica Schltr.ex Limpricht) of Habenaria grown on the Qinghai-Tibetan Plateau (QTP), and combined with seven already published cp genomes which may assist to uncover their genomic profiling. The two genomes ranged from 155259-155269 bp in length and both encoded 132 genes, including 86 protein, 38 tRNA and 8 rRNA. In the cp genomes, the tandem repeats (797), SSRs (2195) and diverse loci (3214) were identified. Comparative analyses of codon usage, amino frequency, microsatellite, oligo repeats and transition and transversion substitutions showed similarities among the species. Moreover, we identified 16 highly polymorphic regions with nucleotide diversity above 0.02, which may be suitable for robust authentic barcoding and inferring in the phylogeny of Habenaria species. Among the polymorphic regions, positive selection was significantly exerted on the several genes such as cemA, petA, and ycf1. This may suggest that the important adaptation stratagem for two Habenaria species on the QTP. The phylogenetic relationship displayed that H.aitchisonii and H. tibetica have closer relationship than others and the rest seven species clustered in the other three groups. Our findings also supported the idea that Habenaria could be divided into different sections. This study enriched the genomics resources of Habenaria, which may be helpful for the conservation efforts of these endangered species.

The abstract of the study on the challenges and opportunities of supply chain digitalization encapsulates the primary findings and their implications from the perspectives of industry leaders. This qualitative research investigated how senior executives across diverse sectors perceive and manage the transition to digital supply chains. Interviews with twenty industry leaders revealed key challenges such as data integration, cybersecurity, organizational resistance, and financial constraints. Data integration issues were particularly pronounced, as participants struggled with unifying disparate data sources from legacy and modern systems, creating barriers to achieving cohesive digital frameworks. Cybersecurity emerged as a critical concern due to the increased vulnerability of digital supply chains to cyber threats, necessitating robust and proactive security measures. Organizational resistance, driven by employee apprehensions about job displacement and technological unfamiliarity, highlighted the need for effective change management practices, including clear communication and training. Financial constraints, especially for small and medium-sized enterprises (SMEs), underscored the difficulty of justifying the substantial investments required for advanced digital technologies. Despite these challenges, the study identified significant opportunities associated with digitalization, including enhanced operational efficiency, improved visibility, predictive analytics, and better customer satisfaction. Digital tools were found to streamline processes, reduce manual intervention, and provide real-time insights into supply chain performance, thus facilitating more informed decision-making and swift responses to disruptions. The accelerated adoption of digital technologies during the COVID-19 pandemic demonstrated their essential role in enhancing supply chain resilience and agility. Additionally, the integration of sustainability goals through digitalization supported resource optimization and waste reduction, aligning with broader corporate social responsibility objectives. The findings suggest that while the path to digital transformation is complex, the benefits of improved efficiency, decision-making, customer satisfaction, and sustainability present compelling incentives for organizations to invest in and embrace digital supply chain solutions.

BackgroundIntracranial hemorrhage (ICH) in pregnancy, estimated at 1 in 10,000 cases, presents significant diagnostic challenges prenatally despite advanced imaging techniques such as ultrasound (US) and MRI. Detecting ICH is crucial for pregnancy management and future treatment decisions aimed at improving fetal survival and reducing brain damage. This report presents the diagnosis and outcomes of two cases of prenatal ICH.Cases presentationThe first case involves a 30-year-old pregnant woman with irregular prenatal care diagnosed with ICH at 32 weeks of gestation via US and MRI. She chose to continue the pregnancy, delivering a 3160g male infant at 36 weeks via cesarean section. Following NICU care including resuscitation and ventriculoperitoneal shunt placement, the infant was discharged. Subsequent examinations showed a reduction in ventricle size. In the second case, a 27-year-old woman taking acenocoumarol for a mechanical heart valve developed fetal subdural hemorrhage detected by US and MRI. She opted to terminate the pregnancy, resulting in a stillborn male infant weighing 1530g.ConclusionFetal ICH presents with varying severity and prognostic implications, diagnosed and graded using US. Fetal cranial MRI may help clarify the etiology. Management remains controversial, with termination of pregnancy potentially warranted in severe cases due to poor prognosis. Further research is needed to refine management and improve outcomes in fetal ICH.

According to their nutritional value, their ability to adapt to the various environmental conditions, and their versatility, cereals are among the most cultivated plants in the world. However, the ongoing climate changes subject crops to important environmental stress that for some varieties leads to high production losses. Therefore, selection of species and varieties more versatile and adaptable to different environmental conditions can be important. However, the characteristics of some cereals are not completely known, this is a priority before to improve their cultivation. The aim of this study is to characterize select species of potential suitable for local environmental conditions, nutritional value.

A quantum theory of gravity is among the most pursued goals in physics. I present a definitive and direct experimental proof that refutes the widely believed hypothesis of quantum gravity. The detections of astrophysical gravitational waves (GW) are inferred from the differential oscillations of suspended mirrors of optical interferometers like the aLIGO detectors. If gravity is indeed quantized, then the average energy $\bar{E}$ in the minute oscillations of the mirrors, at a frequency $\nu$, corresponds to the absorption of an integer number $N$ gravitational quanta with total energy $E_{gw}=Nh\nu$. The coherent and coincident detections across large separations of detectors, and also the constraint of the equivalence principle, dictate that the average number of quanta $\bar{N}$ forcing the oscillations obeys $\bar{N}\gg 1$, or $1/\sqrt{\bar{N}}\ll 1$. However, the average energy $\bar{E}$ in the differential oscillations is smaller than the energy of a single quantum of GW radiation at the detected astrophysical GW frequencies. This startling finding implies that $\bar{N} <1$, which is physically impossible if gravity is quantized. This singular contradiction refutes the long-held hypothesis that gravity is quantized.

Mobile applications, websites and social media networks are nowadays widely used communication tools. With the emergence of communication-related technologies in our lives and, consequently, the rise of social networks and mobile applications, health-related applications, generically encompassed under the term digital health, have become popular among the population. Smartphones and artificial intelligence have become very useful tools for health-related interventions. Because they are very accessible and cost-effective. They are also able to serve a larger number of communities than traditional interventions. Nutrition is not a field that has remained on the sidelines, and numerous mobile applications and technological tools have emerged that are intended to help and support diets or in the process of recovering from disease. However, many of these applications have limitations that are important to consider. For this reason, the aim of this review was to analyze the most widely used tools currently in use, discuss their advantages and disadvantages, and propose hypotheses for improvement.

Coastal zones experience increasing climatic and human pressures, which lead to growing risks and tipping points (TPs) under future scenarios and natural resource scarcity. To avoid crossing TPs with irreversible coastal losses, this paper proposes the development of adaptation pathways based on advanced coastal oceanography and engineering knowledge that enables an objective assessment of evolving coastal risks. These pathways feature sequential interventions, combining conventional engineering works with nature-based solutions (NbS), steered by simulations and observations as a function of available coastal resources (space and sediment) and risks for infrastructure and socioeconomic assets. Such an adaptation has been developed for urban and peri-urban Mediterranean beaches, considering conventional coastal engineering together with NbS. Both types of interventions are assessed in terms of key physical variables, which serve to evaluate performance and estimate TPs. This analysis supports the new coastal protection and management plan promoted by the local government and the coastal adaptation plan of the central government. The approach and results illustrate the potential of adaptation pathways for beach sustainability, enhancing the compatibility between short/long-term coastal protection objectives under present/future climate and management scenarios. The adaptation pathways development underpins an increasing stakeholder cooperation to achieve shared decisions for coastal sustainability.

Nowadays, the most advanced micromachined microphones on the market are based on a capacitive coupling principle. Capacitive micro-electro-mechanical systems-based (MEMS) microphones resemble their millimetric counterparts, both in function and in performances. The most advanced MEMS microphones reached a competitive level compared to commonly used measuring microphones in most of the key performance parameters except the acoustic overload point (AOP). In an effort to find a solution for measurement of high-level acoustic fields, microphones with piezoelectric coupling principle have been proposed. Such novel microphones exploit the piezoelectric effect of a thin layer of aluminum nitride, which is incorporated in their diaphragm structure. In these microphones fabricated with micromachining technology, no fixed electrode is necessary, in contrast to capacitive microphones. This specificity significantly simplifies both the design and the fabrication and opens the door for a new improvement of the acoustic overload point as well as harsh environmental applications. Several variations of piezoelectric structures together with an idea leading to electrically controlled sensitivity of MEMS piezoelectric microphone are discussed in the paper.

The Cosmic Theory of Structure (CTS) model presents a comprehensive framework that integrates gravitational waves, neutrinos, dark matter, and quantum field interactions. This model aims to provide a unified understanding of the universe's formation and evolution. The CTS model has undergone rigorous validation using the latest datasets, demonstrating its robustness and predictive power. Key updates include detailed mathematical formulations, refined theoretical frameworks, and enhanced descriptions of fundamental cosmic phenomena. This manuscript presents the final validated version of the CTS model, highlighting its alignment with observational data and its implications for future research in cosmology and quantum physics.

Background: developmental dysplasia of the hip (DDH) is a condition characterized by abnormal hip development in infancy. Early diagnosis allows for effective treatment, while late presentation often necessitates complex surgical interventions. Current recommendations advise screening between the 6th and 8th week postnatal using ultrasound, typically employing the Graf method. However, there's no universal consensus on whether ultrasound screening significantly increases treatment compared to clinical examination-guided ultrasound. This study aims to explore the feasibility of prenatal ultrasound for early identification of DDH risk. Methods: This prospective observational study involved 100 pregnant women undergoing fetal hip ultrasound during the second and third trimesters. Using the modified Graf method, alpha and beta angles were calculated on the fetus. Postnatally, alpha and beta angles were compared with prenatal values. Results: Prenatal ultrasound at 24th week showed inconclusive results because of the difficulty in identification of Graf landmarks, while ultrasound at 34th week has proved to be a reliable and safe method for quantitative determination of alpha and beta angles. Significant correlations were found between prenatal and postnatal alpha and beta angles. Moreover, significant differences in prenatal alpha and beta values were observed in patients developing mature/immature hips postnatally. Conclusions: Prenatal diagnostics show promise for predicting infant hip development. Further research is warranted to validate correlation strength and clinical applicability.

Citizen science has emerged as a potent approach for environmental monitoring, leveraging the collective efforts of volunteers to gather data at unprecedented scales. Within the framework of the I-CHANGE project, MeteoTracker, a citizen science initiative, was employed to collect and analyze meteorological measurements. This paper presents the results of our analysis, demonstrating the effectiveness of citizen science in generating valuable environmental data. Through MeteoTracker, volunteers contributed to a comprehensive dataset, enabling insights into local weather patterns and trends. Our findings underscore the potential of citizen science to augment traditional monitoring efforts and inform decision-making processes in environmental research and management. The paper discusses the methodology employed, including data collection and statistical analysis techniques. Results highlight the reliability and accuracy of citizen-generated data, as well as the strengths of the MeteoTracker platform. The implications of our findings for environmental research, policy development, and public engagement are discussed, along with recommendations for enhancing the effectiveness of citizen science initiatives in environmental monitoring.

This study analyzes the relevance of governance structure for efficiency in revenue collection by Brazilian Water Utilities (WUs). Data was collected from the National Information System on Sanitation (SNIS) for 127 Brazilian WUs, covering a balanced longitudinal panel from 2018 to 2022. Governance structures evaluated included Ownership (public or private) and Corporatization (publicly traded or not). In scientific databases, we did not find studies on the efficiency of specific WUs in collecting customer bills for services rendered and its relationships with this type of governance; thus, this would be the main innovative contribution of the study to the previous literature. In the first stage, the study utilized the Dynamic Slack Based Model (DSBM) to assess revenue collection efficiency. In the second stage, an econometric model with Generalized Estimating Equations (GEE) to explain the efficiency. The findings revealed a global average inefficiency of 50.47% in revenue collection. Corporatization was linked to higher collection efficiencies, while ownership type was significant, but with lower collection efficiency. Factors such as tariff accessibility, urbanization, and the COVID-19 pandemic also influenced efficiency. The study suggests regulatory bodies should consider these insights to implement policies that prevent inefficiencies from affecting the tariff system for services.

The article covers the Surveyor Institute's historical context and its role in the legal order of land rights registration. It highlights the importance of GPS technologies in ensuring the accuracy of registering rights to real estate. The article reviews the role of systematic registrations in clarifying overlapping cadastral data and preventing neighborhood disputes. Additionally, it underscores the challenges related to surveying activities in Georgia and emphasizes the importance of establishing a legal framework for this profession.

Cellular senescence has recently been recognized as a hallmark of cancer, reflecting its association with aging and inflammation, its role as a response to deregulated proliferation and oncogenic stress, and its induction by cancer therapies such as radiation, chemotherapy, and targeted agents. While such therapy-induced senescence (TIS) has been linked to resistance, recurrence, metastasis and normal tissue toxicity, TIS has the potential to enhance therapy response and stimulate anti-tumor immunity. In this review, we examine the Jekyll and Hyde nature of senescent cells (SnCs), with a particular focus on how their persistence while expressing the senescence-associated secretory phenotype (SASP) modulates the tumor microenvironment through autocrine and paracrine mechanisms. Via the SASP, the formation of SnCs may alternately mediate resistance or response to conventional therapy. Further, toward fulfilling the unmet potential of cancer immunotherapy, we consider how SnCs may influence tumor inflammation and serve as a source of antigen to potentiate anti-tumor immunity. This new view suggests treatment strategies based on inducing TIS to enhance immune checkpoint blockade. Finally, we describe strategies for mitigating the detrimental effects of senescence, such as modulating the SASP or targeting SnC persistence, toward enhancing the benefits of cancer treatment.

The aim of this work is to study the phase transformations, microstructures and mechanical properties of the martensitic stainless steel (MSS) 410 deposits produced by laser powder-directed energy deposition (LP-DED) additive manufacturing. The LP-DED MSS 410 deposits underwent the post heat treatment in austenitizing at 980℃ for 3hrs and followed by different tempering treatment at the temperatures of 250, 600, and 750℃ for 5hrs, respectively. The analyses of phase transformations and microstructural evolutions of LP-DED MSS 410 were carried out using X-ray diffraction, SEM-EDS, and EBSD. Vickers hardness and tensile strength properties were also measured to analyze the effects of the different tempering heat treatments. It reveals that as-built MSS 410 has very fine lath martensite and high hardness of about 480HV1.0 and tensile strength of about 1280 MPa, but elongation was very lower than the post heat treated ones. Precipitations of chromium carbide (Cr23C6) were most commonly observed at the grain boundaries and the entire matrix at the tempering temperatures of 600℃ and 750℃. In general, the tensile strengths de-creased from 1381MPa to 688MPa as tempering temperatures increased up to 750℃ from 250℃. Additionally, as the tempering temperature increased, the chromium carbide and tempered mar-tensite structures became coarser.

Identification of drug targets and biochemical investigations on mechanisms of action is a are major issues in modern drug development. The present article reviews the classical “one drug” – “one target” paradigm. Novel methods for target deconvolution and for investigation of resistant strains based on protein mass spectrometry have shown that multiple gene products and adapta-tion mechanisms are involved in responses of pathogens to xenobiotics. This review is focused on protozoan pathogens. The conclusions can, however, be extended to chemotherapies against other pathogens or cancer. For this review we have searched Pubmed (pubmed.ncbi.nlm.nih.gov) and Web of Science (webofscience.com) using the key words listed below (status May 2024)

As most of the videos are destined for human perception, many techniques have been designed to improve video coding based on how the human visual system perceives video quality. In this paper, we propose the use of two perceptual coding techniques, namely contrast masking and texture masking, jointly operating under the High Efficiency Video Coding (HEVC) standard. These techniques aim to improve the subjective quality of the reconstructed video at the same bit rate. For contrast masking, we propose the use of a specific weighting matrix for each block size (from 4×4 up to 32×32). We achieve average Bjøntegaard Delta-Rate (BD-rate) gains of between 2.5% and 4.48%, depending on the perceptual metric and coding mode used. The texture masking scheme is based on the classification of each coding unit, using its mean directional variance features as input to a support vector machine model. According to this classification, the block’s energy, the type of coding unit, and its size, an over-quantization is computed to provide a QP offset (DQP) for this coding unit. By applying both techniques in the HEVC Reference Software, an overall average of 5.79% BD-rate gain is achieved.

Ghana Tamale's current waste management system is overwhelmed by the growing waste crisis, necessitating the exploration of Waste-to-Energy technologies as an innovative solution. This study explores challenges and opportunities for integrating Waste-to-Energy (WtE) technologies into Tamale's existing waste management system. Qualitative research identified policy hurdles, financial constraints, social concerns, and institutional weaknesses as key barriers. Conversely, stakeholder collaboration, public education, and capacity building emerged as some success fac-tors. A proposed implementation plan emphasizes feasibility studies, public engagement, pub-lic-private partnerships (PPPs), and technology selection based on waste composition. Addition-ally, a novel framework for WtE integration within a broader Integrated Solid Waste Manage-ment (ISWM) system is presented. This framework incorporates waste sorting, recycling, WtE alternatives, and responsible management of residuals. Validation by key stakeholders con-firmed the framework's potential to improve waste management in Tamale. By overcoming identified challenges and implementing the proposed framework, Tamale can achieve environ-mental sustainability, energy generation, and progress towards UN SDGs 7, 11, and 12. This re-search offers valuable insights for policymakers and paves the way for a cleaner and more sus-tainable future for Tamale, potentially serving as a model for other developing cities.

Background: Since the onset of widespread COVID-19 vaccination campaigns, there have been concerns about serious cardiovascular adverse events, including myocarditis, myocardial infarction, and venous thromboembolisms, all of which can lead to cardiopulmonary arrest. This study aimed to estimate excess cardiopulmonary arrest mortality in King County, WA, and investigate any association with COVID-19 vaccination rates. Methods: Data was obtained from the annual King County, WA, EMS reports, the U.S. Census Bureau, and The Tennessean COVID-19 Vaccine Tracker. An exploratory data analysis was performed. Excess deaths were calculated using the 2015-2020 cardiopulmonary arrest mortality trend line. The relationship between excess cardiopulmonary arrest mortality and vaccination rates was analyzed using polynomial regression analysis. A quadratic regression model was used to generate expected population growth trends. The excess mortality model for King County was used to calculate yearly estimates for excess cardiopulmonary arrest fatalities in the USA. Results: Approximately 98% of the King County population received at least one dose of a COVID-19 vaccine by 2023. Our analysis revealed a 25.7% increase in total cardiopulmonary arrests and a 25.4% increase in cardiopulmonary arrest mortality from 2020 to 2023 in King County, WA. Excess cardiopulmonary arrest deaths were estimated to have increased by 1,236% from 2020 to 2023, rising from 11 excess deaths (95% CI: -12, 34) in 2020 to 147 excess deaths (95% CI: 123, 170) in 2023. A quadratic increase in excess cardiopulmonary arrest mortality was observed with higher COVID-19 vaccination rates. The general population of King County sharply declined by 0.94% (21,300) in 2021, deviating from the expected population size. Applying our model from these data to the entire United States yielded 49,240 excess fatal cardiopulmonary arrests from 2021-2023. Conclusions: We identified a very strong ecological and temporal association between excess cardiopulmonary arrest mortality and the COVID-19 vaccination campaign, which resulted in high vaccination rates. The biological plausibility of death from acute cardiac and pulmonary causes after COVID-19 vaccination has been previously demonstrated and is concerning given these real-world observations. Urgent further research is needed to determine if similar trends are observed in other regions with attention to risk mitigation for incident events and improved survival with resuscitation.

The discovery of water ice on the moon has revolutionized our understanding of lunar science and has profound implications for future space exploration and habitation. Through a comprehensive analysis of remote sensing data, isotopic studies, and neutron detection experiments, this research elucidates the presence, distribution, and origins of lunar water ice. Radar observations from missions like Clementine and Chandrayaan-1 reveal distinct polar regions with elevated circular polarization ratios, indicative of volatile ice deposits. Spectral detections by instruments such as M3 and Diviner further confirm the presence of water ice in lunar-shadowed regions, with estimates suggesting reserves of up to 300 million tons at the poles. Neutron detection experiments on lunar orbiters like LRO provide additional evidence, detecting hydrogen signals consistent with water ice below the lunar surface. Isotopic analyses offer insights into the origin and evolution of lunar water ice, with comparisons to cometary and asteroidal sources. Proposed missions, such as Artemis-3 and Artemis-4, aim to collect samples from the lunar South Pole for detailed isotopic analysis, furthering our understanding of lunar water ice's composition and history. Scientific data, including the lunar bulk water content and estimated water ice reserves, underscore the significance of lunar water ice as a critical resource for future space exploration endeavors. Calculations estimating the total water-ice area and water abundance near specific lunar features provide valuable insights into the potential utilization of lunar water ice for sustained human presence on the Moon and beyond.

Cardiotoxicity is the main side effect of several chemotherapeutic drugs. Doxorubicin (Doxo) is one of the most used anthracyclines in the treatment of many tumors, but the development of acute and chronic cardiotoxicity limits its clinical usefulness. Different studies focused only on the effects of long-term Doxo administration, but recent data show that cardiomyocyte damage is an early event induced by Doxo after a single administration that can be followed by progressive functional decline, that lead to overt heart failure. The knowledge of molecular mechanisms involved in the early stage of Doxo induced cardiotoxicity is of paramount importance to treat and/or prevent it. This review aims to illustrate several mechanisms considered to underlie Doxo-induced cardiotoxicity, such as oxidative and nitrosative stress, inflammation, and mitochondrial dysfunction. Moreover, here we report data from both in vitro and in vivo studies indicating new therapeutic possibilities to prevent Doxo-induced cardiotoxicity.

Drought and arsenic contamination pose a serious threat to global rice crop yield. Existing solutions focus on either heavy metal or drought remediation, but not both. Examination of the Oryza sativa metagenome via the National Center for Biotechnology Information (NCBI) database revealed promising candidates within the aquaporin gene family capable of efficiently mitigating both arsenic toxicity and drought stress. Rice cotyledons were genetically augmented with arsenic-resistant OsNIP2;1 and OsNIP3;2 genes, and drought-resistant OsPIP2;2 genes. In moderate drought conditions and 25 ppm arsenic-contaminated soil, transgenic plants showed drought tolerance and reduced translocation of arsenic from root to shoot. Soil arsenic levels plummeted from 25 ppm to 5 ppm, demonstrating the strategy's efficacy. Statistical significance was confirmed using T tests. Thus, aquaporin-augmented Oryza sativa offers a promising solution to mitigate both arsenic and drought stress in rice plants improving crop yield and facilitating soil decontamination.

The use of edible films has become a topic of great interest in the food and environmental sectors, due to their potential to prevent food deterioration and their biodegradability. In this context, this study aimed to develop and characterize edible films based on camu-camu residue, gelatin and glycerol, evaluating their solubility, thermal, degradability, antioxidant and water vapor permeability properties of the gelatin matrix. This is the first study incorporating camu-camu into a gelatin and glycerol matrix. The films produced with the incorporation of camu-camu residue proved to be manageable and soluble, with the presence of some non-soluble residues, providing a shine and a well-presented appearance. In the biodegradation results the samples 03 and 04 appeared to degrade the most, being two of the three most affected samples in the triplicate. The films showed degradation modifications from the third day of the experiment. In the germination and plant growth analysis, Sample 04 showed satisfactory development compared to other samples, making it the sample with the best overall result in the analyses. These results demonstrate that the produced materials have potential for food packaging applications.

This review paper explores the multifaceted landscape of digital heritage preservation and presentation, focusing on various methods and technologies employed in the field. The introduction highlights the significance of digital heritage in preserving and showcasing cultural, historical, and natural assets. It emphasizes the non-destructive nature of digital preservation methods, enabling wider access and research possibilities. The paper also discusses the relevance of cultural computing in creating engaging user experiences and recognizes its potential in bridging cultural gaps. The literature review section presents a diverse range of technologies and tools, such as ZENetic Computer, C-Vyasa Sanskrit, Pandulipi Samshodhak, JATAN, and immersive projects like "Alice in Wonderland." The methods and technologies section delves into the technical aspects of digital heritage preservation. It explores photogrammetry, 3D depth sensing, 3D laser scanning, augmented reality, digital storytelling, focus stacking, and multiple view stereovision. Each technology is discussed in detail, highlighting its applications, benefits, and relevance in cultural heritage preservation. Finally, the comparative analysis section offers insights from various research papers and books, comparing different methodologies and approaches in the field. This review paper provides a comprehensive overview of digital heritage preservation, showcasing the diverse methods and technologies that contribute to the safeguarding and presentation of our cultural heritage for future generations.

The field of financial literacy is intricate and developing. This systematic review of the literature provides a thorough overview of financial literacy. It examines the sample of 3182 papers of the period 1990 to 2023 from different databases such as Scopus, Web of Science, IEEE, Science Direct, and JSTOR and identifies important publications, knowledge gaps, and rising themes. The four major topics that emerged are the degree of financial literacy among various groups of people, gender disparity in financial literacy, the influence of financial literacy on financial behavior and planning, and the impact of financial education on day-to-day decisions. Groups with lower levels of financial literacy include adults, women, people in the lower-income band, rural people, etc. Financial planning and financial behavior are positively associated with financial literacy. Financial literacy could be enhanced with financial education; however, output depends upon program design and experimental group. The review also discusses financial literacy in the context of gender disparity, including its definition, difficulties encountered, and possible solutions. This systematic study will help researchers, practitioners, and policymakers by providing insightful information on financial literacy and its ramifications.

Immunotherapy, particularly Immune Checkpoint Blockade (ICB), has demonstrated significant efficacy in treating melanoma in recent years. However, accurately predicting treatment success and avoiding ineffective therapies remains an unresolved challenge. Therefore, this study aims to develop statistical models utilizing neural networks to forecast the effectiveness of immune checkpoint therapies for melanoma patients. Our models primarily rely on Artificial Neural Networks (ANN) to anticipate both Overall Survival (OS) and Progression-Free Survival (PFS) among melanoma patients undergoing anti-CTLA4 and anti-PD1/anti-PDL1 therapy. We incorporate gene expression data, measured in Transcripts per Million (TPM), derived from bulk tumor RNA-sequencing datasets. Additionally, clinical variables such as gender, age, and treatment type are factored into our analysis. The ANN underwent optimization to attain the highest feasible precision in anticipating the predetermined survival outcome. Issues stemming from high-dimensional data, such as overfitting, were tackled through regularization and feature selection methods. Consequently, the ANN-based model incorporating feature selection exhibited the capacity to forecast survival (PFS) in response to ICB therapy with a maximal precision of 86%. Conversely, the ANN lacking feature selection but incorporating regularization achieved accuracies of up to 72% for PFS and 71% for OS, correspondingly. In order to confront the challenge posed by limited patient samples and to assess replicability, the model underwent training and validation based on the amalgamation of all five datasets. However, this amalgamation failed to enhance predictive performance, necessitating further investigations.

To analyse Xuanwei ham flavour quality at different post-ripening times, and to elucidate its microbial diversity, we studied free amino acids and volatile flavouring compounds (VOCs) and their relationships. We determined microbial community changes in Xuanwei ham at 1, 2, 3 and 4 years (W1-4) by high-throughput sequencing, and simultaneously, VOCs and free amino acid contents by gas chromatography-mass spectrometry (GC-MS) and liquid chromatography (LC), respectively. Then heatmap analysis was used to determine correlations between microbial communities, free amino acids and VOCs. A total of 25 free amino acids were detected, among which W3 contained the fewest and most were generally lower than in hams in the other three years. Fifty-nine VOCs were detected, among which were 17 esters, and the highest ester content was found in W4. Atotal of 87508391 reads were obtained from the samples, of which 812844 were clean reads, and the bacterial Chao1 index and Shannon index were significantly higher in W3 than in the other three ham years. In differetly-aged Xuanwei hams, Pseudomonadota was the dominant bacterial phylum, and the most abundant genera were Sarocladium, Klebsiella and Vibrio. Klebsiella was the most abundant genus in W1, and Vibrio in W3, and the second most abundant genera were Sarocladium and Gammaretrovirus. We elucidated differences in Xuanwei ham microflora structures in different years and the main flavor-related microorganisms, thus providing a theoretical basis for subsequent Xuanwei ham storage, quality and improvement.

Constructing an innovation system centered on new-quality productivity is key to achieving China's technological independence and high-quality development, especially against the backdrop of rapid advancements in artificial intelligence. This article utilizes provincial panel data from China spanning 2010 to 2022 and applies kernel density estimation and the Moran's I index to study the spatiotemporal evolution of artificial intelligence and new-quality productivity. The findings indicate a clustering trend in the development of both factors across regions. Causal empirical analysis using a two-way fixed-effects model reveals that artificial intelligence positively influences new-quality productivity, with conclusions validated by robustness and endogeneity tests.

Intraprocedural rupture (IPR) is a severe complication of coil embolization (CE) for intracranial aneurysms, yet the clinical and hemodynamic features of rupture risk areas remain unclear. From January 2013 to December 2023, 435 saccular cerebral aneurysms (316 unruptured, 119 ruptured) underwent CE at our institution. Included were cases where extravasation or coil protrusion occurred during CE. The rupture point was determined from postoperative data, and computational fluid dynamics (CFD) analysis was conducted to assess hemodynamic features. IPR occurred in six aneurysms (1.3%; three ruptured, three unruptured; dome size: 4.7±1.8 mm, D/N: 1.5±0.5, locations: four internal carotid artery [ICA], one anterior cerebral artery, one middle cerebral artery). ICA aneurysms were treated using adjunctive techniques (three balloon-assisted, one stent-assisted). Two aneurysms (M1M2 and A1) were treated simply, yet had relatively small and misaligned domes. CFD analysis identified the rupture point as a flow impingement zone with maximum pressure (Pmax) in five aneurysms (83.3%). Time-averaged wall shear stress (WSS) was locally reduced around this area (1.3±0.7 [Pa]). Hemodynamically unstable areas indicated fragile, thin walls with rupture risk. Microcatheter insertion along the inflow zone, directed towards the caution area, was practiced. The presence of a flow impingement zone with Pmax and low WSS suggests potential aneurysm rupture in CE, particularly with adjunctive techniques. Small aneurysms, especially those with axial misalignment, warrant careful consideration due to the risk of excessive flow impact stress on the aneurysm wall.

Smartphone-based fundus camera and telemedicine are an opportunity for accessing ocular health inequalities in underresourced areas. The objective of this study is to evaluate the prevalence of retinal findings in a community in the Amazon and propose strategies to enhance ocular health. A cross-sectional study was conducted in a river side community. Retinal photos from the posterior pole and optic disc were captured using a portable fundus camera. All photos and data were analyzed remotely by a retina specialist. The final sample was 107 participants, aged 52±17. Retinal findings were detected in 37.4% (95%CI 28.7–46.8) of the sample, the three main retinal findings were epithelial changes (10.3%, 95%CI 5.6–17.1), chorioretinal scars (8.4%, 95%CI 4.2–14.8), and dry Age-related Macular Degeneration (7.5%, 95%CI 3.6–13.6). This study detected retinal alterations in similar prevalence of other underresourced areas. Telemedicine is an opportunity to address health inequities, especially in ophthalmology, through relatively low-cost portable devices, supporting clinical decisions in areas with low health access, however, maintaining assistance after implementation is a challenge. Enhancing medical education and training local non-specialized health professionals for risk assessment, device handling, and data base use is reasonable to ensure follow-up.

Medicinal plants have been a cornerstone of traditional medicine systems for centuries, offering a vast array of bioactive compounds with therapeutic potential. However, the identification, characterization, and elucidation of the pharmacological properties of these plants have often been challenging due to their complex chemical composition and diverse biological activities. Bioinformatics, with its interdisciplinary approach combining biology, computer science, and information technology, presents a powerful toolkit for the systematic study of medicinal plants. This review provides an overview of bioinformatics methodologies and resources that can facilitate the identification, phytochemical analysis, pharmacological investigation, and conservation of medicinal plants. It highlights the integration of omics technologies, computational algorithms, database resources, and molecular modeling techniques in advancing our understanding of medicinal plants' therapeutic potential and their applications in drug discovery and development.

The production of concrete and the manufacturing process of cement results in a significant carbon footprint, contributing to a large portion of global emissions in structures such as buildings, bridges, roads, and tunnels. Although concrete is an ideal building material that is durable and long-lasting, it can be susceptible to micro-cracks. These micro-cracks in concrete can allow water and chlorine ions to penetrate the structure, leading to the degradation of concrete and corrosion of the reinforcement, posing an unacceptable level of structural risk. Self-healing concrete is not a new material in the construction industry but can be characterized by the capability of concrete to repair its cracks autogenously or autonomously. Recent advancements in concrete research and technology have given us a better understanding of concrete's healing properties. Self-healing concrete combines durability with sustainability while offsetting the high carbon output of concrete manufacturing and production and associated life-cycle costs. Technologies such as microbially-induced calcite (calcium carbonate) precipitation (MICP), shape memory polymers, encapsulation methods, hydration, and swelling agents can potentially reduce carbon emissions while enhancing resilience and longevity. This paper examines these technologies and their applications in the construction industry by comprehensively reviewing the literature and available case studies. The study concluded that there are promising advancements and innovations in concrete, particularly when improving upon the autogenous healing properties. The recommendations for future research include exploring more ways to bring the concrete industry and cement manufacturing toward net zero carbon emissions.

Rice husk ash (RHA) is agricultural waste with high silica content that has had proven technical feasibility as a pozzolanic material since the 1970s. Notwithstanding, its use in mortars and concrete is limited by the standards currently utilized in some countries where RHA production is high and the aforementioned pozzolanic material is not standardized. This is the case of Spain, one of the main rice producers in Europe. Nowadays, the high pressure placed on the Portland cement production sector to reduce energy use and CO2 emissions has given rise to a keen interest shown in mineral admixtures for cement manufacturing. In this research, we intend to establish the contribution of different RHA types to final blended Portland cement properties (symbol “H” was used to identify RHA in standardized cements). The experimental results demonstrated that RHA with good pozzolanic properties (large specific surface and high amorphous silica content) had to be limited to 10% cement replacement because of the severe reduction in workability at higher replacement percentages. RHA with lower reactivity, such as crystalline RHA, or fly ash (FA), can be used to prepare binary and ternary blended cements with reactive RHA. It is possible to design the following cements: CEM II/A-H and CEM II/A-(H-V) It would also be possible to design cement (CEM II/B-(H-V) with replacement values up to 30% and the same 28-day mechanical performance observed for the Portland cement without mineral addition.

Along with the increasing industrialization of contries and population growth, the global. With the thougth of overcoming climate change and renducing greenhouse gas emissions in the atmosphere, interest in alternative sloar, wind, water, geothermal, tidal and ocean wave energy has significantly increased. Hydropower is one of the most used inexhaustible sources of energy on a global scale. The efficiency of water turbines can be increased by optimizing the blade cascade and the casing. For this purpose, research is conducted on specialized laboratory benches. The purpose is to determine the influencing parameters which affecting the nature of the power and cavitaion curves This paper presents the results of numerical and laboratoty studies of axial hydrokinetic turbines. A detailed analysis of the influence of the geometric parameters of the blades on the operating curves is made. A mathematica model for synthesis of the blade cascade is derived. An assessment of water energy soures has been made and sites of high energy potential have been pointed. The present material can be used for development of a methodology for calculation of efficient axial hydrokinetic turbines.

In the symptomatic treatment of gastrointestinal disorders, high dosages of zinc oxide (ZnO) were conventionally employed. However, concerns regarding the potential for microbial resistance and ecological detriment have arisen due to the excessive application of this compound. These concerns highlight the urgency to minimize the use of ZnO and to explore sustainable nutritional solutions. Hydrolysable tannins (HTs), known for their role in traditional medicine for acute gastrointestinal issues, emerge as a promising alternative. This study examined the combined effect of food-grade HTs and lower ZnO concentration on relevant biological functions of Caco-2 cells, a widely used model of the intestinal epithelial barrier. We found that, when used together, ZnO and HTs (ZnO/HTs) enhanced tissue repair and improved epithelial barrier function, normalizing the expression and functional organization of tight junction proteins. Finally, the ZnO/HTs combination strengthened enterocyte defence against oxidative stress induced by inflammation stimuli. In conclusion, combining ZnO and HTs may offer a suitable and practical approach for decreasing ZnO levels in veterinary medical applications.

The 2020-2025 Dietary Guidelines for Americans recommends limiting intakes of saturated fat and added sugars (SF/AS) to 88% of the representative sample of U.S. adults. The top sources of SF were cheese, pizza, ice cream, and eggs. The leading sources of AS were soft drinks, tea, fruit drinks, and cakes and pies. This analysis reflects a parsimonious approach to reliably identify foods and beverages that contribute to SF/AS intakes in U.S. adults.

The effect of embryo reinsertion immediately after embryo flushing was studied to determine its effect on luteal function, pregnancy outcome, endometrial bacterial contamination, and embryo morphology. In Experiment 1, eight mares were used during 32 cycles (8 cycles in each group): for the first two groups, inseminated mares were flushed 8 days after ovulation and prostaglandin F2α was not administered: in group EF-ET (embryo flushing and embryo transfer) the embryo was reinserted in the same donor mare, while in the EF group, no further procedure was performed. In the third group (ET), non-inseminated mares (recipients) received a Day 8 embryo 5 to 8 days after ovulation. Progesterone concentration was measured before EF/ET and 72 h after in the 3 groups. Pregnancy diagnosis was performed within 6 days of transfer. In Experiment 2, twelve mares were used during 17 cycles in two groups: EF-ET (n=11) and ET (n=6), as in Experiment 1, except that every mare was flushed 24 h after embryo transfer to retrieve the embryo. Fewer pregnancies resulted after transfer in EF-ET cycles (0(8, 0%) than in the ET group (6/8, 75%). Progesterone concentration decreased significantly (p=0.05) 72 h after EF-ET, but not in EF or ET cycles (p>0.1). Three mares from the EF-ET showed full luteolysis and signs of endometritis. In Experiment 2, more (5/6; p=0.08) grade I embryos were recovered in the ET compared to the EF-ET group (3/7); 4 embryos were graded III-IV (were broken or had signs of degeneration) in the EF-ET group, but none in the ET group. In both groups, capsule fragments were obtained as indicative of the presence of a recently destroyed embryo in the EF-ET (n=3) and ET (n=1) groups. Positive bacterial cultures were obtained in 2/11 and 1/6 embryo flushes from the EF-ET and ET groups, respectively.

At present, magnetic selection of genetically modified cells is mainly performed with surface markers naturally expressed by cells such as LNGFR, CD4 and H-2Kk. The disadvantage of such markers is the possibility of their undesired and poorly predictable expression by unmodified cells before or after cell manipulation, which makes it essential to develop new surface markers that would not have such a drawback. Earlier, modified CD52 surface protein variants with embedded HA and FLAG epitope tags (CD52/FLAG and CD52/HA) were developed by the group of Dr. Mazurov for selection of CRISPR-modified cells using FACS. In the current study, we tested whether these markers can be used for magnetic selection of transduced cells. For this purpose, appropriate constructs were created in MigR1-based bicistronic retroviral vectors containing EGFP and DsRedExpress2 as fluorescent reporters. Cytometric analysis of the transduced NIH 3T3 cell populations after magnetic selection evaluated the efficiency of isolation and purity of the obtained populations, as well as the change in the median fluorescence intensity (MFI). The results of this study demonstrate that the surface markers CD52/FLAG and CD52/HA can be effectively used for magnetic cell selection, and their efficiencies are comparable to that of the commonly used LNGFR marker. At the same time, the significant advantage of these markers is the absence of HA and FLAG epitope sequences in cellular proteins, which rules out spurious co-isolation of negative cells.

Background: Although antiretroviral therapy (ART) effectively halt disease progression in HIV infections, complete eradiation of the virus remains elusive. Additionally, challenges such as long-term ART toxicity, drug resistance, and the demanding regimen of daily and lifelong ad-herence required by ART highlight the imperative need for alternative therapeutic and preventa-tive approaches. In recent years, broadly neutralizing antibodies (bNAbs) have emerged as promising candidates, offering potential for therapeutic, preventative and possibly curative in-terventions against HIV infection. Objective: This review aims to provide a comprehensive overview of the current state of knowledge regarding the passive immunization of bNAbs in HIV-1 infected individuals. Main findings: Recent findings from clinical trials have highlighted the potential of bNAbs in treatment, prevention, and in the quest of an HIV-1 cure. While monotherapy with a single bNAb is insufficient in maintaining viral suppression and preventing viral escape, ultimately leading to viral rebound, combination therapy with potent, non-overlapping epitope-targeting bNAbs have demonstrated prolonged viral suppression and delayed time to rebound by effec-tively restricting the emergence of escape mutations, albeit largely in individuals with bNAb-sensitive strains. Additionally, passive immunization of bNAb have provided ‘proof-of-concept’ for antibody-mediated prevention against HIV-1 acquisition, although com-plete prevention was not obtained. Therefore, further research on the use of bNAbs in HIV-1 treatment and prevention remains imperative.

: Shear-wave elastography (SWE) has become popular in clinical practice for many diseases.However, there are not adequate research for spleen-related diseases.This study aimed to investigate the potential of quantitative values obtained through SWE in evaluating spleen pathologies in the pediatric population and to demonstrate its perfomance to differentiate splenomegaly-related diseases.Research group retrospectively included children with pathological diagnoses related to spleen from November 2016 to April 2021 and they were categorized three groups as portal hypertension (PH), benign lymphoid hyperplasia (BLH), malignant infiltration (MI).Spleen sizes and parenchymal stiffness were also calculated for each group.Subsequently, mean spleen stiffness in each compared with normal values within the same age group.In total 2781 children (1379 children for study group, 1402 children for control group) were enrolled to the study.The highest stiffness were observed in the PH group, which is statistically higher than others (p&lt;0.05). Although the mean spleen stiffness in the group with BLH was higher than the control and MI group, the difference was not statistically significant (p=0.08).The mean stiffness in the group with MI was significantly lower than both the control group (p=0.005) and PH (p=0.01).In conclusion, using SWE in the differential diagnosis of etiologies causing splenomegaly, could make important contribution.

Oracles have been suggested as a vital piece of infrastructure necessary to allow blockchain-based smart contracts to reach their full potential by interacting with real-world data. This paper begins by providing an approachable entry point to the oracle problem and the current landscape of existing solutions. From there, we provide an overview of published research to narrow down unexplored research directions and derive questions for interviews. Finally, the results of 15 unstructured expert interviews are presented and discussed. The focus here is the industry landscape of oracle projects, opportunities for innovation, and challenges needing to be overcome.

The assessment of Photovoltaic (PV) systems, a key component of sustainable energy solutions, is of paramount importance in the pursuit of a greener future. This abstract provides an overview of environmental assessments associated with PV systems, considering their life cycle, energy production, and ecological impact. The study explores various methodologies and tools employed in the evaluation of PV systems’ environmental performance, addressing issues such as material sourcing, manufacturing, installation, and end-of-life disposal. Additionally, it delves into the trade-offs and challenges in achieving sustainability objectives in the solar energy sector. By critically examining the environmental implications of PV systems, this research contributes to informed decision-making and the sustainable integration of solar power into our energy landscape.

In recent decades the Mediterranean area observed an increase in large fires, despite the decrease in the number of fire ignitions, following a worldwide tendency. Climate change has been the main culprit for large burnt areas, and alterations of forest ecosystems, resulting in the increased recurrence of forest fires. In Portugal, the analogous trend resulted in the destruction of large rural, urban and industrial areas, where after the 2017 months of June and October catastrophic events, the government implemented the 2019 specific policies for preventing fire outbreaks and defending the forest against fires. This compulsory policy demanded that landowners and local governments alike needed to contact specific authorities requesting authorization for their intentions to clean properties in and around urban areas, roads, and forest limits. Despite policy and careful monitoring, ignitions still occur, and in many cases resulting from the implementation of such policies. The study analyses the before and after policy implementation, considering 6904 ignitions records from the period between 2014 and 2023 from the central area of Portugal, covering the transition area between the agricultural fields of the Tagus valley and the Monte-junto-Estrela Mountain range, the district of Santarém. The authorization to use fire in clearance practices is granted according to a set of weather conditions, temperature, wind intensity, and relative humidity, when analyzing fire ignitions with the average daily wind intensity at the site of the occurrence, we observed that more than half of wildfires occur on days with winds between 10 and 20 Km/h, whereas intensities greater than 30 Km/h only 1% of the total occurrences, and of these 22% occurred due to the use of fire in the burning of agricultural leftovers and cut and piled bushes. The circulation of the thermal depression in the Iberian Peninsula gives rise to increasing intensity throughout the day, reaching a maximum in the late afternoon, this factor combined with the misjudgment of safe conditions leads us to suggest stricter intervals and the need for awareness of daily variation in conditions.

Abstract Background: Analysis of different type of consolidation in dogs and cats relay on parenchymal and vascular criteria. Hypothesis: the vascular criteria of the consolidation it’s possible to perform in dogs and cats and vascularisation is different in shred, tissue, nodule, wedge sign and mass. Animals: 347 cats and 634 dogs with different types of consolidations. Methods: Retrospective study between 2018-2023. Lung ultrasound performed in dogs and cats with different types of consolidations. Characteristic of bronchogram: air dynamic and static bronchogram, fluid bronchogram or absence of bronchogram. Types of vascularisations in consolidation: tree like type, residual, chaotic vascularisation and penetrating from the chest wall to consolidation and “vascular sign”. Conclusion and Clinical Importance: Analysis of bronchogram and type of vascularisation in consolidation is possible to perform in dogs and cat. The analysis of mentioned criteria had an impact on subsequent diagnostic and therapeutic decisions

CRISPR/Cas9 has emerged as the predominant method for genome editing due to its cost-effectiveness and broad applicability, playing a crucial role in advancing sustainable practices across various sectors. This systematic review leverages the PRISMA methodology to explore CRISPR/Cas9's impact on environmental protection, thereby supporting the Sustainable Development Goals (SDGs). Analyzing data from the Web of Science, the review found significant growth in related publications, with a 30% increase since 2014, predominantly from the US, China, Germany, and the UK. The study categorizes the scientific developments into three trends: advancements in agriculture, gene editing techniques, and biofuel production. Key discussions include the use of CRISPR/Cas9 in developing fourth-generation biofuels and environmental biosensors, as well as its applications in enhancing genetic resilience and controlling invasive species. These innovations highlight CRISPR/Cas9's potential in promoting sustainable resource management and energy generation, marking a pivotal contribution to ecological conservation and sustainability efforts.

The current study compared the goodness of fit and estimation precision of Bayes and maximum likelihood (ML) structural equation modeling across sample sizes. Data consisted of Markov Chain Monte Carlo generated samples of 50, 75, 100, 125, 150, 200, 250, 500, 750, 1000, and 1500 observations. The Bayes and ML methods were used to estimate a structural equation model with 40 parameters, including 12 continuous observed indicators, four latent variables, and three structural paths. Analyses were conducted with the Mplus 8.0 statistical software and were replicated 500 times with each of the 22 conditions (11 sample sizes x 2 estimation methods). Indices of model fit were the Bayes information criterion, the Tucker-Lewis index, the comparative fit index, the root mean square error of approximation, the posterior predictive p-value (for Bayes models), and the ꭓ2 test (for ML models). Results showed that as the sample size increased, both estimation methods exhibited improved model fit and enhanced estimation precision, and both methods performed well with samples of 200 or larger; however, ML demonstrated a marginally superior fit with smaller samples. These findings were not consistent with previous research and suggest that ML remains a better choice with continuous data and small samples.

(1) E-governance is defined as the application of electronic means in the interaction between government and citizens and government and business, as well as in internal government operations to simplify and improve democratic, governmental, and business aspects of governance. Thus, e-governance is built from a paradigmatic dimension such as e-democracy (relationship between government and citizens) and an operational one such as e-government. The objective was to design and validate an instrument to measure e-governance based on three factors: a) e-administration, b) e-services, and c) e-democracy; (2) Methods: Based on the level of importance given to each factor (sample of 2042 Latin American citizens), as well as the relationships between them, an analysis of the importance of each factor is carried out; (3) Results: After the confirmatory analysis, the definitive instrument with which e-governance can be measured by other researchers and future research is obtained, considering the three selection factors, namely: e-administration, e-services and e-democracy; (4) Conclusions: This research contributes to political science through the design and validation of an instrument consisting of 39 items that can be used to measure e-governance according to the dimensions proposed by the United Nations Educational, Scientific and Cultural Organization.

Environmental factors, such as drought-stress, significantly impact maize growth and productivity worldwide. To improve yield and quality, effective strategies for early detection and mitigation of drought-stress in maize are essential. This paper presents a detailed analysis of three imaging trials conducted to detect drought-stress in maize plants using an existing, custom-developed, low cost, high throughput phenotyping platform. We propose a pipeline for early detection of water stress in maize plants using a Vision Transformer classifier and analysis of distributions of near-infrared (NIR) reflectance from the plants. We also explored suitable regions on the plant that are more sensitive to drought-stress and show that the region surrounding the youngest expanding leaf (YEL) and the stem can be used as a more consistent alternative to analysis involving just the YEL. Our results show good separation between well-watered and drought-stressed trials for two out of the three imaging trials both in terms of classification accuracy from data-driven features as well as through analysis of histograms of NIR reflectance.

Hemoglobinopathies are a group of disorders in which the hemoglobin molecule has abnormal production or structure. The hemoglobin molecules in red blood cells (RBC) are impacted by the blood disease known as sickle cell disease (SCD), and Thalassemia is one of the major monogenic disorders that reduces hemoglobin production( Kohne et al ., 2011). This disorder results in a large number of red blood cells being destroyed, leading to anemia. India bears a huge burden of hemoglobinopathies; thalassemia is the most prevalent (Mondal SK et al., 2016). A key component of thalassemia prevention is a successful screening procedure to identify Thalassemia carriers. Effective screening programs have numerous obstacles, especially in environments with limited resources. Machine learning (ML) has been used to solve technical and domain-specific problems in a variety of prognostic and diagnostic medical jobs. In this work, we aimed to identify and analyze the most common mutation of β--thalassemia and sickle cell disease from the north Indian population by employing Machine learning-based algorithms. To accurately predict the carrier state from a simple blood test, and to predict pathogenic hemoglobin variants in a group of individuals, these results demonstrate the application of integrated bioinformatics and machine learning approaches. This study contributes to the validation of the models based on data from several individuals and hemoglobinopathies.

This research article describes the creation of a mock-up for a Smart Insole prototype that employs Force Sensitive Resistors (FSRs) and an ADXL345 accelerometer. The mock-up is an early step towards realising the concept and functionality of the planned Smart Insole system. The key factors in the mock-up's design, integration, and testing are highlighted, with a focus on the iterative refining and optimisation process. The mock-up, which was carefully planned and implemented, highlights the practicality and possible applications of Smart Insole technology in healthcare, sports performance measurement, and rehabilitation. The paper outlines the development process and implementation of a "Smart Insole" utilizing Force Sensitive Resistors (FSR) and the ADXL345 accelerometer. The project aims to create an innovative wearable technology solution for monitoring foot biomechanics and enhancing human performance. The Smart Insole prototype integrates FSRs strategically placed on the insole to capture pressure distribution across the foot, along with an ADXL345 accelerometer to track foot orientation and movement. Through a combination of hardware integration, firmware development using Arduino IDE, and visualization using Processing application, the Smart Insole offers real-time monitoring and analysis of gait dynamics, pressure distribution, and foot movement.

Marshes are an important ecosystem, acting as biodiversity hotspot, a carbon sink as well as a bioremediation site, breaking down anthropogenic waste such as antibiotics, metals and fertilizers. For participating in these metabolic activities and their capability to contribute to primary productivity, microorganisms in such habitats have become of interest to investigate. Since Proteobacteria were previously found to be abundant, and the waters are well-aerated and organic-rich, this study on the presence of anoxygenic phototrophic bacteria, purple non-sulfur bacteria or aerobic anoxygenic phototrophs in marshes was initiated. Samples were collected at 7 Manitoban sites and anoxygenic phototrophs were cultivated and preliminary enumerated. A group of 14 strains, which represented the phylogenetic diversity of the isolates was further physiologically investigated. Aerobic anoxygenic phototrophs and purple bacteria were present at each location and they belonged to the α- and β-Proteobacteria subphyla. Some were closely related to known heavy metal reducers (Brevundimonas) and xenobiotic decomposers (Novosphingobium, Sphingomonas). All were able to synthesize the photosynthetic complexes aerobically. This research highlights the diversity and potential contribution’s anoxygenic phototrophs make to the essential functions taking place in wetlands.

Recent technological advancements in produced water for the oil and gas industry have a long history that spreads over centuries and has roots with many mathematicians, physicists, engineers, and inventors. Working to understand the many ideas and questions has helped to bring the produced water technologies to where we are today. Fluid mechanics is an essential factor in the world of engineering because it comes with significant benefits when designing the necessary equipment to overcome the challenging endeavors of daily operations. Many of us believe certain ideas or products were developed within a specific year not fully understanding the idea or concept might be hundreds of years old. For example, when we think of fluid mechanics, we do not think of Archimedes' immersing King Hiero II crown in water. Archimedes did this to determine the displacement of the water as he knew gold was denser than silver. Archimedes was one of the pioneers who was part of the beginning of fluid mechanics. Another interesting fact is the first valve invented was in 1 AD by Heron of Alexandria. This valve can be described as the very first hydraulic valve. The evolution of technology over hundreds of years has made considerable innovations benefiting engineers all over the world. These innovations come in the form of PLCs, RTUs, PIDs, mathematical formulas, processing methods, and SCADA systems.

Viral diseases pose a significant threat to tomato crops (Solanum lycopersicum L.), one of the world's most economically important vegetable crops. The limited genetic diversity of cultivated tomatoes contributes to their high susceptibility to viral infections. To address this challenge, tomato breeding programs must harness the genetic resources found in native populations and wild relatives. Breeding efforts may aim to develop broad-spectrum resistance against the virome. To identify the viruses naturally infecting 19 advanced lines, derived from native tomatoes, high-throughput sequencing (HTS) of small RNAs and validation by PCR and RT-PCR were used. Single and mixed infections with Tomato mosaic virus (ToMV), Tomato golden mosaic virus (ToGMoV), and Pepper huasteco yellow vein virus (PHYVV) were detected. The complete consensus genomes of three variants of Mexican ToMV isolates were reconstructed, potentially forming a new ToMV clade with a distinct 3' UTR. The absence of reported mutations associated with resistance-breaking to ToMV suggests that the Tm-1, Tm-2, and Tm-22 genes could theoretically be used to confer resistance. However, the high mutation rates and a 63 nucleotide insertion in the 3' UTR of Mexican ToMV isolates suggest the need to evaluate known resistance genes against these viral variants. The precise identification and characterization of viruses that naturally infect tomato germplasm could be used as a strategy for selecting the appropriate disease management and guiding breeding efforts.

West Nile virus (WNV) is a re-emerging flavivirus, primarily circulating among avian hosts and mosquito vectors, causing periodic outbreaks in humans and horses, often leading to neuroinvasive disease and mortality. Spain has reported several outbreaks, most notably in 2020 with seventy-seven human cases and eight fatalities. WNV has been serologically detected in horses in the Community of Madrid, but to our knowledge, it has never been reported from wild birds in this region. To estimate the seroprevalence of WNV in wild birds and horses in the Community of Madrid, 159 wild birds at a wildlife rescue center and 25 privately owned equines were sampled. Serum from thirteen birds (8.2%) and one equine (4.0%) tested positive with a WNV competitive ELISA designed for WNV antibodies detection, but sensitive to cross-reacting antibodies to other flaviviruses. VNT confirmed WNV antibodies in four bird samples (2.5%), and antibodies to undetermined flavivirus in four additional samples. One equine sample (4.0%) tested positive for WNV, although this horse previously resided in a WN-endemic area. ELISA positive birds included both migratory and resident species, juveniles and adults. Two seropositive juvenile birds suggest local flavivirus transmission within the Community of Madrid, while WNV seropositive adult birds may have been infected outside Madrid. The potential circulation of flaviviruses, including WNV, in birds in Madrid Community raises concerns, although further surveillance in mosquitos, wild birds and horses in Madrid is necessary to establish the extent of transmission, and the principal species involved.

The conformations of trifluoroacetyl triflate, CF3C(O)OSO2CF3, were investigated through vibrational experimental methods (gas-phase FTIR, liquid-phase Raman, and Ar-matrix FTIR spectroscopy) and Density Functional Theory (DFT) calculations. A potential energy surface was computed using the B3P86 /6-31+g(d) approximation as a function of the dihedral angles τ1 = CCOS and τ2 = COSC. The surface reveals three minima, which were further optimized using the B3LYP method with various basis sets (6-31++G(d), 6-311++G(d), tzvp and cc-pvtz). The global minimum corresponds to a syn-anti conformer (the CO double bound syn with respect the O−S single bond and the C−O single bond anti with respect to de S−C single bond). The other two minima represent enantiomeric syn-gauche forms. The Ar-matrix FTIR spectrum exhibited clear evidence of the presence of two conformers. Furthermore, the randomization process observed following broad-band UV-visible irradiation facilitated the identification of the IR absorption of each conformer. Based on the Ar-matrix FTIR experiments, the vapour phase of trifluoroacetyl triflate at room temperatures was composed of approximately 60-70% of the syn-anti conformer and 30-40% of the syn-gauche form.

Parkinson’s disease (PD) is the second most common degenerative disease which may cause blood pressure abnormalities due to autonomic dysfunction. Early morning rise of blood pressure which is called morning surge is found to be related with some cardiovascular diseases when it is exaggerated. We wanted to search the relation of Morning blood pressure surge (MBPS) and inflammation in PD. Method: Ambulatory blood pressure monitoring for 24 hours, fibrinogen to albumin ratio, hs-CRP are used in this retrospective study. Fifty idiopathic PD patients and 50 age and sex matched control cases were included. MBPS, it has been defined as the difference between morning BP (measured 2 hours after awakening) and the lowest night-time BP. Body mass index (BMI) is used as an independent variable. Results: Median value of MBPS for PD group (21,63) was significantly different from the control group values (18,63) (p

Background and Objectives: ACTION-France (Awareness, Care and Treatment In Obesity MaNagement in France) aims to identify the perceptions, attitudes, behaviors, and potential barriers to effective obesity management in France and guide collaborative actions. Methods: ACTION-France is a cross-sectional survey of people with obesity (PwO) and healthcare professionals (HCPs), in France. The PwO and HCP questionnaires ran from 27/09/2022 to 01/02/2023 and from 19/12/2022 to 31/03/2023, respectively. Results: The study, encompassing 1226 PwO and 166 HCPs, reveals a shared recognition of obesity as a chronic condition. However, despite being requested by most PwO, weight-related discussions are surprisingly infrequent, leading to delayed diagnosis and care. PwO and HCPs held different views as to why: HCPs often attributed it to PwO’s lack of motivation or disinterest, whereas PwO avoided them because they felt weight managing was their own responsibility and were uncomfortable discussing it. When weight was discussed, primarily with general practitioners (GPs), discussions mostly focused on physical activity and dietary. However, results identified a strong psychosocial impact of obesity: 42% of respondents reported anxiety-depressive symptoms, and many more hesitated to engage in certain social activities because of their weight. Psychotherapy was only discussed by 55% of HCPs. Pharmaceutical options were also rarely discussed (19.5% of HCPs), though 56.1% of PwO reported they would want to. Conclusions: HCPs’ and PwO’s perceptions differed significantly and need to converge through enhanced communication. A holistic approach, integrating comprehensive training for GPs and psychological comorbidities, would help to bridge perceptual gaps effectively and foster more empathetic and effective patient care.

The year 2021 marks the 70th anniversary of establishing the Tibet Autonomous Region (TAR) within the People’s Republic of China. As with China as a whole, Tibet has experienced a tumultuous history over these past seventy years. Especially since the 1980s, the region has witnessed significant economic development, poverty alleviation, and increased social indicators such as life expectancy and healthcare. At the same time, substantial disparity within Tibet, as well as between Tibet and the rest of China, persists. This article tracks 16 social, economic, and ecological indicators for the past several decades, as well as levels of economic assistance provided to Tibet by other Chinese provinces and the Chinese central government in an attempt to narrow the development gap between Tibet and the rest of the country. The results show that since 1951, despite progress in many aspects, there remains a substantial gap between Tibet’s indicators and the average level of China, with the biggest gap being the illiteracy rate. Uneven development between regions within Tibet, especially between urban and rural areas, also persists.

Accurate streamflow forecasting is crucial for effectively managing water resources, particularly in countries like Colombia, where hydroelectric power generation significantly contributes to the national energy grid. Although highly interpretable, traditional deterministic, physically-driven models often suffer from complexity and require extensive parameterization. Data-driven models like Linear Autoregressive (LAR) and Long Short-Term Memory (LSTM) networks offer simplicity and performance but cannot quantify uncertainty. This work introduces Sparse Variational Gaussian Processes (SVGPs) for forecasting streamflow contributions. The proposed SVGP model reduces computational complexity compared to traditional Gaussian Processes, making it highly scalable for large datasets. The methodology employs optimal hyperparameters and shared inducing points to capture short-term and long-term relationships among reservoirs. Training, validation, and analysis of the proposed approach consider the streamflow dataset from 23 geographically dispersed reservoirs recorded during twelve years in Colombia. Performance assessment reveals that the proposal outperforms baseline Linear Autoregressive (LAR) and Long Short-Term Memory (LSTM) models in three key aspects: adaptability to changing dynamics, provision of informative confidence intervals through Bayesian inference, and enhanced forecasting accuracy. Therefore, the SVGP-based forecasting methodology offers a scalable and interpretable solution for multi-output streamflow forecasting, thereby contributing to more effective water resource management and hydroelectric planning.

Alpinia oxyphylla is a traditional Chinese medicinal plant, with a medicinal history of more than 1,700 years. Ring leaf blight (RLB) disease, caused by pestalotioid species, is an important disease of A. oxyphylla, seriously affecting the yield and quality of fruits. The causal agent of RLB disease has not been systematically identified and characterized so far. In this study, thirty-six pestalotioid strains were isolated from the leaves and stems of A. oxyphylla collected from 6 cities of Hainan province, China. Based on multi-locus phylogeny (ITS, tef-1α and tub2) and morphological characteristics analyses, seventeen species belonging to three genera (Neopestalotiopsis, Pestalotiopsis and Pseudopestalotiopsis) were identified and six new species (N. baotingensis, N. oblatespora, N. olivaceous, N. oxyphylla, N. wuzhishanensis and N. yongxunensis) were described. Pathogenicity tests revealed that strains of Neopestalotiopsis species caused more severe ring leaf blight on A. oxyphylla than strains of Pestalotiopsis and Pseudopestalotiopsis under wounded inoculation conditions.

Keywords: Tendon injuries; Mallet finger; Suture techniques

The integration of three-dimensional (3D) printed resin denture teeth represents a significant ad-vancement in digital dentistry. This study aimed to assess their ability to withstand chipping and indirect tensile fractures, comparing them with conventionally manufactured resin denture teeth. Four groups, each comprising 30 specimens, were examined: Group 1 featured 3D printed denture teeth (NextDent, 3D Systems, Soesterberg, The Netherlands), while the others included commer-cially obtained Ivostar Shade, SpofaDent Plus, and Major Super Lux teeth. Stereolithography 3D printing was utilized to produce methacrylate-based photopolymerized resin teeth models for Group 1, while the remaining groups were commercially sourced. Chipping and indirect tensile fracture tests were performed at a speed of 1 mm/min until fracture occurred. Statistical analysis was conducted using one-way analysis of variance (ANOVA) with Tukey's honestly significant difference multiple comparisons test (p < 0.05). Results indicated that 3D-printed teeth exhibited higher indirect tensile fracture resistance than Major Super Lux and Ivostar Shade but lower than SpofaDent Plus. Additionally, in the chipping test, buccal chipping occurred in 3D-printed resin teeth without distortion. In the indirect tensile test, the fracture line emerged near the loading point, extending cervically from the inner incline of both cusps. Overall, denture teeth produced via 3D printing with printable resin materials demonstrated sufficient fracture resistance, making them suitable for prosthetic applications.

Electrification of society, increasing renewable energy sources and mobility charging lead to new loading patterns for power transformers. Dynamic load conditions induce enhanced mechanical stress on the transformers’ windings, potentially causing degradation of the solid insulation over time and compromising the transformer's short-circuit withstand capability. Thermal expansion of the windings, caused by losses in the copper conductors, occurring as the transformer is load-ed, increases the stress. Conversely, magnetic losses in the core and tie plate expansion contribute to a reduction in stress. This paper presents the effect of step changes in core losses and copper losses by on-line measurements of the clamping pressure, to better understand the mechanical stresses acting upon the solid insulation cellulose materials.

Background: Classical Hodgkin's lymphoma (cHL) is a lymph node disease, however, extranodal involvement is present in about 10% of affected individuals. Various forms of direct central nervous system (CNS) involvement have been reported, including intracranial, epidural, leptomeningeal, and intramedullary spinal cord cHL (Table 1). We hereby describe the clinical presentation, work up, and outcomes of two distinctive cases of cHL with intracranial extra-axial spread in patients receiving novel combination and traditional chemotherapy. Methods: This case series (n=2) was conducted following the CARE guidelines. Institutional review board (IRB) approved protocol #24-015 for HIPPA waiver of subjects in our retrospective study. Results: Patients with cHL exhibiting CNS symptoms or relapse refractory cases benefit from neuroimaging and excluding infectious etiologies. Suspicious lesions include iso- to hypointensity on T1 weighted and iso- to hyperintensity on T2 MR scans. Diagnosis is confirmed with biopsy. Treatment with A-AVD has shown more benefit than traditional ABVD chemotherapy. There has been shown progression free survival with nivolumab-AVD (N-AVD) over brentuximab-AVD (B-AVD). Conclusion: cHL with CNS involvement is rare and requires comprehensive workup to exclude infectious and other malignancies. Diagnosis relies on neuroimaging and subsequent brain biopsy. Treatment with novel N-AVD has shown greater PFS in patients with advanced cHL.

Text-based CAPTCHA remains the most widely adopted security scheme, which is the first barrier to securing websites. Deep learning methods, especially Convolutional Neural Networks (CNNs) are the mainstream approach for text-CAPTCHA recognition, which are widely used in CAPTCHA vulnerability assessment and data collection. However, verification code recognizers are mostly deployed on the CPU platform as part of a web crawler and security assessment, they are required to have both low complexity and high recognition accuracy. Due to the specifically designed anti-attack mechanisms like noise, interference, geometric deformation, twisting, rotation, and character adhesion in text CAPTCHAs, some characters are difficult to efficiently identify with high accuracy in these complex CAPTCHA images. This paper proposed a recognition model named Adaptive-CAPTCHA with a CRNN module and trainable and configurable filtering networks, which effectively handle the interference and learn the correlation between characters in CAPTCHAs to enhance recognition accuracy. Experimental results on two datasets of different complexity show that compared with the baseline model Deep-CAPTCHA, the number of parameters of our proposed model is reduced by about 70% and the recognition accuracy is improved by more than 10 percentage points in the two datasets. In addition, the proposed model has a faster training convergence speed.

AFM nanoindentation showed variation in stiffness (Elastic modulus) due to heterogenous nature of the collagen fibres. The S values varied from 5 N/m to 11.11 n/m corresponding to an E change of 2.25 to 1.38 GPa. The variation in effective modulus (Eff) with respect to displacement indicated crossing the parabolic limit. A softening index n was proposed due to the heterogenous behaviour of the biomaterials

Presenting a case report on the occurrence of IgA nephropathy with hepatitis B infection in a 32-year-old male patient with main complaints of generalized weakness, easy fatigue, and bilateral swelling of the lower extremities. IgA nephropathy (IgAN), or Berger’s disease, is the most common primary glomerulonephritis worldwide. It is characterized by the formation of IgA1-containing circulating immune complexes and their deposition in the glomerular mesangium. Its etiology remains multifactorial and often idiopathic. IgA nephropathy alone does not have an infectious etiology; instead, it usually develops in conjunction with an infectious condition that triggers a dysregulated immune response. There is no proof that any particular infectious agent is the secondary cause of IgA nephropathy. Hepatitis B virus (HBV) infection is an infectious agent associated with renal complications, including IgA nephropathy. Symptoms include gross haematuria and mild proteinuria indicative of renal involvement. Laboratory investigations and serological tests are followed by imaging studies such as ultrasound and renal biopsy to confirm the diagnosis. The challenges encountered during the diagnostic process included overlapping symptoms and limitations of available diagnostic tests, highlighting the need for comprehensive diagnostic evaluation and multidisciplinary management approaches in similar cases. This case underscores the importance of recognizing and managing both conditions simultaneously to prevent long-term complications such as end-stage renal disease.

Zanthoxylum armatum is an forest tree with apomixis characteristic, and RWP-RKs are plant-specific transcription factors known to regulate nitrogen response and embryonic development. However, the genome-wide analysis of RWP-RK family genes in Z.armatum is unclear. In this study, 36 ZaRWP-RK transcription factors were identified in the genome of Z.armatum, among which 15 genes were belonged to the RKD subfamily and 21 belonged to the NLP subfamily. Duplication events of ZaRWP-RK genes were mainly segmental duplication, and synteny analysis revealed close phylogenetic relationship between Z.armatum and Arabidopsis. The analysis of cis-elements indicated that ZaRWP-RK genes may be involved in the regulation of embryonic development of Z.armatum by responding to plant hormones such as abscisic acid, auxin, and gibberellin. Real-time PCR showed that the expression levels of most ZaRWP-RK genes were significantly increased from flowers to young fruits. Protein-protein interaction network analysis further revealed the potential roles of the ZaRWP-RK proteins in apomixis. Collectively, this study provide a theoretical basis for future investigations into the ZaRWP-RK genes and their regulatory mechanisms in the apomixis process of Z.armatum.

Hydrogel wound dressings hold great potential in eliminating bacteria and accelerating the healing process. However, it remains a challenge to fabricate hydrogel wound dressings that simultaneously exhibit excellent mechanical and photothermal antibacterial properties. Here we report the development of polydopamine-functionalized graphene oxide/calcium alginate/Polypyrrole cotton fabric-reinforced hydrogels (abbreviated as rGO@PDA/CA/PPy FHs) for tackling bacterial infections. The mechanical properties of hydrogels were greatly enhanced by cotton fabric reinforcement and an interpenetrating structure, while excellent broad-spectrum photothermal antibacterial properties based on the photothermal effect were obtained by incorporating PPy and rGO@PDA. Results indicated that rGO@PDA/CA/PPy FHs exhibited superior tensile strength in both the warp (289±62.1N) and weft directions (142±23.0N) similar to cotton fabric. By incorporating PPy and rGO@PDA, the swelling ratio was significantly decreased from 673.5% to 236.6%, while photothermal conversion performance was significantly enhanced with a temperature elevated to 45.0 ℃. Due to the synergistic photothermal properties of rGO@PDA and PPy, rGO@PDA/CA/PPy FHs exhibited excellent bacteria-eliminating efficiency for S. aureus (0.57%) and E. coli (3.58%) after exposure to NIR for 20 min. We believe that the design of fabric-reinforced hydrogels could serve as a guideline for developing hydrogel wound dressings with improved mechanical properties and broad-spectrum photothermal antibacterial properties for infected wound treatment.

Exoskeletons designed to assist patients with activities of daily living are becoming increasingly popular, but still are subject to research. In order to gather requirements for the design of such systems, long-term gait observation of the patients over the course of multiple days in an environment of daily living are required. In this paper a wearable all-in-one data acquisition system for collecting and storing biomechanical data in everyday life is proposed. The system is designed to be cost efficient and easy to use, using off-the-shelf components and a cloud server system for centralized data storage. The measurement accuracy of the system was verified, by measuring the angle of the human knee joint at walking speeds between 3 and 12 km/h in reference to an optical motion analysis system. The acquired data was uploaded to a cloud database via a smartphone application. Verification results showed that the proposed toolchain works as desired. The system reached an RMSE from 2.9° to 8°, which is below most of the comparable system. The system provides a powerful, scalable platform for collecting and processing biomechanical data, which can help to automize the generation of an extensive database for human kinematics.

Systemic AL amyloidosis is a challenging disease for which many patients are considered frail in daily clinical practice. However, no study has so far addressed frailty and its impact on the outcome of these patients. We built a simple score to predict mortality based on three frailty-associated variables: age, ECOG performance status (&lt;2 vs. 2) and NT-proBNP (&lt;8500 vs. 8500 ng/L). Four-hundred and sixteen consecutive newly diagnosed patients diagnosed at ten sites from the Spanish Myeloma Group were eligible for the study. The score was developed in a derivation cohort from a referral center, and it was externally validated in a multicenter cohort. On multivariate analysis the three variables were independent predictors of survival. The score was able to discriminate four groups of patients in terms of overall survival and early mortality in both cohorts. Comorbidity was also analyzed with the Charlson comorbidity index, but it did not reach statistical significance in the model. A nomogram was created to easily estimate the mortality risk of each patient at each time point. This score is a simple, robust, and efficient approach to dynamically assess frailty-dependent mortality both at diagnosis and throughout the follow-up. The optimal treatment for frail AL amyloidosis patients remains to be determined but we suggest that the estimation of frailty-associated risk could complement current staging systems, adding value in clinical decision-making in this complex scenario.

Growing concerns about the greenhouse effect, global warming, and adverse climate changes primarily stemming from carbon dioxide (CO2) emissions in traditional Portland cement (OPC) used in civil engineering construction, have prompted a shift toward eco-friendly alternatives like geopolymer cement (GPC). Over the last few decades, significant advancements have been made in developing environmentally sustainable pavement construction materials such as GPC to mitigate global CO2 emissions. The success of geopolymer cement (GPC) as an eco-friendly alternative to OPC has garnered attention for its potential to lower carbon emissions and enhance durability. This is attributed to the sustainable production method of GPC, where industrial cementitious waste materials (such as fly ash (FA), metakaolin (MK), mine tailings (MT), slag, etc.) are combined with an eco-friendly alkaline activator and water through the geopolymerization process. Numerous studies on geopolymer concrete indicate that, like OPC, GPC exhibits comparable mechanical properties, including strength, fire resistance, chemical resistance, and durability. This review explores the properties and applications of GPC as a sustainable material in pavement construction, exploring key studies and advancements in geopolymer technology, particularly its suitability for pavement applications. The assessment covers the mechanical properties, long-term performance, and environmental impact of geopolymer-based pavements, providing a comprehensive overview to inform policymakers, engineers, and researchers about the viability of geopolymer-based materials as a sustainable solution for modern pavement construction.

The fungus Xylaria sp. Z184, harvested from the leaves of Fallopia convolvulus (L.) Á. Löve, has been isolated for the first time. Chemical investigation of the methanol extract of this strain’s culture broth led to the discovery of three new pyranone derivatives fallopiaxylaresters A-C (1–3) and a new bisabolane-type sesquiterpenoid named fallopiaxylarol A (4), along with the first complete set of spectroscopic data for the previously-reported pestalotiopyrone M (5). Known pyranone derivatives (6–11), sesquiterpenoids (12–14), isocoumarin derivatives (15–17), and an aromatic allenic ether (18) were co-isolated. Their structures were elucidated by the interpretation of HRESIMS, 1D, 2D NMR spectroscopy and quantum chemical computation method. The antimicrobial, anti-inflammatory, and α-glucosidase inhibitory activities of selected compounds and crude extract were evaluated in vitro. The extract inhibited nitric oxide (NO) production induced by lipopolysaccharide (LPS) in murine RAW264.7 macrophage cells, with an inhibition rate of 77.28 ± 0.82% at a concentration of 50 μg/mL. The compounds 5, 7 and 8 displayed weak antibacterial activity against Staphylococcus areus subsp. aureus at a concentration of 100 μM.

The primary objective of this current study is to conduct a comprehensive review of existing literature that discusses research on post and core restorations, covering aspects such as their composition, manufacturing methods, and clinical effectiveness. The methodology employed in this review encompasses the implementation of a well-defined search strategy, the establishment of criteria for inclusion and exclusion, and the selection of relevant studies to summarize their findings. To gather relevant literature published between 1993 and 2023, the research team conducted separate searches on PubMed, Scopus, and Embase databases. In total, 165 titles were initially retrieved from these electronic databases. By applying the predefined exclusion criteria, the researchers identified 73 articles that specifically address the conventional and computer-aided design/computer-aided manufacturing (CAD/CAM) technologies employed in post and core restorations. These restorations are frequently utilized procedures for repairing teeth that have undergone endodontic treatment and subsequently lost dental structure. The development of computerized technology for the creation of customized posts and cores has emerged as a straightforward and efficient alternative to traditional methods. The review encompasses a synthesis of papers discussing the various techniques and materials employed in constructing post and cores using CAD/CAM technology. Notably, different strategies for restoring endodontically treated teeth through CAD/CAM post and cores have been documented, revealing both direct and indirect approaches. The most mentioned materials for these restorations include zirconia, composite resin, and hybrid ceramics. While the available literature on CAD/CAM post and core procedures is somewhat limited, the review underscores the need for further research to explore the long-term outcomes and efficacy of this treatment approach.

BK polyomavirus (BKPyV) is still a real threat in the management of kidney transplantation. Immunosuppressive treatment disrupts the equilibrium between virus replication and immune response, and uncontrolled BKPyV replication leads to nephropathy (BKPyV nephropathy). The first evidence of BKPyV reactivation in transplant recipients is the detection of viral shedding in urine, which appears in 20% to 60% of patients, followed by BKPyV viremia in 10-20% of kidney transplant recipients. BKPyV nephropathy eventually occurs in 1-10% of this population, mainly within the first 2 years post-transplantation, causing graft loss in about half of those patients. Few data exist regarding the pediatric population and we focus on them. In this paper, we review the existing diagnostic methods, we summarize the evidences on the role of BKPyV humoral and cellular immunity in the modulation of the clinical course of BKPyV infection and as potential predictors of the outcome. We look at the known risk factors of BKPyV nephropathy in the immunosuppressed patient. Finally, we propose a sensible clinical attitude in order to screen and manage BKPyV infection in kidney transplant children.

The methods of Artificial Intelligence (AI) have been used in the planning and operation of power systems for more than 40 years. In recent years, due to the development of microprocessor and data storage technologies, the effectiveness of this use has greatly increased. This paper provides a systematic overview of the application of AI including the use of Machine Learning (ML) to the power system. The potential application areas are divided into four blocks and the classification matrix has been used for clustering the AI application tasks. Furthermore, the data acquisition methods for setting the parameters of AI and ML algorithms are presented and discussed in a systematic way considering the supervised and unsupervised learning methods. Based on this, three complex application examples: wind power generation forecasting, smart grid security as-sessment (using two methods), and automatic system fault detection are presented and discussed in detail. Summary and outlook conclude the paper.

Given the financial demands of attending college, the transition to new living situations, abrupt changes in social support, and overall lifestyle adjustments, college students are at an increased risk of food insecurity (FI) compared to the general population. Collegiate athletes experience an even greater risk of FI as a result of greater time commitments and energy demands associated with their sports. This heightened vulnerability poses a tremendous threat to student-athletes’ academic and athletic achievements. This study aims to address the prevalence and primary determinants of FI among collegiate athletes while providing potential solutions to navigate and alleviate the effects of diminished food security among this demographic. To address these aims, a total of 18 articles were selected from both peer-reviewed and gray literature. The U.S. Household Food Security Survey Module (US-HFSSM) survey tools were predominantly utilized across universities throughout the United States to gather data on FI. Student-athletes reported experiencing FI across various regions of the United States, including universities in northeastern states (n=5), the southwest region (n=3), the southeast region (n=3), the northwest (n=1), and the Midwest (n=1). Overall, FI prevalence rates ranged from 9.9% to 65% and the most significant contributors included limited financial resources, time management, meal plans, and housing location/amenities. These findings highlight a need for screening, education, and intervention to address FI among collegiate athletes.

(1) Background: Asthma and Chronic Obstructive Pulmonary Disease (COPD ) are major global health issues, impacting morbidity, mortality, and healthcare costs. Despite the proven benefits of pharmacist involvement in managing these conditions, their potential in hospitals remains underused. This study aimed to identify patients at high risk of rehospitalisation post-exacerbation of asthma or COPD, to target pharmaceutical interventions. (2) Methods: Data from the University Hospital for January-December 2019 on adult admissions for asthma/COPD were analyzed, focusing on demographics, hospitalization, and clinical outcomes. (3) Results: Among the 140 patients enrolled, a significant majority (91%) underwent adjustments in their treatment regimens during their hospital stay, and nearly 59% faced readmission within six months. A survival analysis highlighted a notable disparity in the rates of rehospitalisation-free survival between patients with asthma and those with COPD, identifying COPD patients as having a higher susceptibility to rehospitalisation. (4) Conclusion: The study found COPD pa-tients at greater risk but didn't specify a priority profile, suggesting the necessity for broad, cus-tomized interventions to improve outcomes and reduce healthcare strain.

Multivariate Time Series Classification (MTSC) is one of most important tasks in time series analysis, aiding in activities such as human motion recognition and medical diagnostics. Existing methods for MTSC do not explicitly model temporal differences and generalize the idea of temporal difference into a efficient temporal module. Additionally, existing methods are not yet able to capture cross-variable relationships well during network training. As a result, they are unable to achieve convincing feature representation, leading to suboptimal classification accuracy. In this paper, we propose a novel MTSC model called Temporal Difference and Cross-variate Fusion Network (TDCFN), which integrates a two-stream differential LSTM network and a cross-variate feature extraction network to enhance feature representation. TDCFN achieves superior classification accuracy by capturing dynamic temporal evolution and inter-variable relationships. The experimental results show that TDCFN can achieve competitive performance with state-of-the-art multivariate time series classification approaches.

The genetic causes of the differentiated, highly treatable and mostly non-fatal papillary thyroid cancer (PTC) are not yet fully known. The widely accepted PTC etiology blames altered sequence or/and expression level of certain biomarker genes. However, our previous studies found that the PTC biomarkers played significantly lower roles than the personalized PTC Gene Master Regulators. Our publicly accessible gene expression data from the cancer nodule and the surrounding normal tissue of surgically removed PTC tumor were re-analyzed to determine the transcriptomic effects on the genomic fabrics responsible for the DNA replication, repair and transcription. Tumor results were compared to the gene expression profiles of the papillary (BCPAP) and the anaplastic (8505C) human thyroid cancer cell lines. The analyses were carried out from the Genomic Fabric Paradigm (GFP) perspective that provides the most theoretically possible comprehensive characterization of the transcriptome and its alterations in disease. The study indicated that, in addition to regulating numerous genes, changes in the homeostatic control of transcript abundances and remodeling of the gene networks had major contributions to the PTC occurrence, resilience and proliferation. Therefore, the molecular mechanisms responsible for gene expression control and inter-coordination should also be considered when designing personalized anti-cancer gene therapies.

Epidemiological data show that the use of alcohol and other psychoactive substances is higher among university students when compared with the general population and high school students. The use of psychotropic drugs by students in health courses deserve special attention due to because they will be responsible for the health education and care of the population. The present study aims to describe, through a cross-sectional study, the risks and the profile of consumption of psychoactive substances by students of the Biological and Health Sciences courses at the Federal University of Bahia (UFBA). An online and anonymous questionnaire was applied from September 20, 2019 to June 15, 2021. 514 responses were obtained, of which 502 were considered according to the inclusion criteria. For recreational use of psychoactive substances, both for lifetime use and for use in the last 3 months, the prevalence of alcohol, cannabis and tobacco were the highest ones in that order. Only alcohol, cannabis and inhalants showed a percentage of individuals at high risk of developing problems. These results indicate the need for local intervention, in order to prevent risky behavior, damage to mental health and major consequences for society and university performance.

The aim of the work is to study the effect of the 3D printing process on the microstructural and hydrophilic properties of polylactic acid (PLA) samples with various model printing patterns obtained from the black Filament PLA by sequentially applying polymer layers using the FDM (Fused Deposition Modeling) method. X-ray phase analysis revealed partial crystallization of PLA polymer chains in printed samples, which occurs under thermal and mechanical action on the original amorphous PLA filament during 3D printing to varying degrees, depending on the geometry of the pattern and the morphology of its surface. At the same time, IR spectroscopy data indicate the preservation of all intrastructural chemical bonds of polylactide. Measured at the original installation, the values of the wetting edge angles on the surface of the printed samples are in the range φ = 50-60°, which is significantly less than the right angle. This indicates the hydrophilic properties of all samples’ surface. At the same time, the influence of different geometries of model drawings in printed samples was found not only on the morphology of the samples’ surface according to SEM data, but also on its wettability.

In this paper the attention is focused on the analysis and the optimization of energy flows in networked systems via a fluid-dynamic model. In particular, a cost functional that represents a term proportional to the kinetic energy of an energy system is studied. First, the functional is optimized for a simple network having a unique node, with an incoming arc and two outgoing ones. The optimization deals with distribution coefficients and explicit solutions are found. Then, the global optimization is obtained using the local optimal parameters at the various nodes of the system. Considering the case study of an energy hub, interesting results are obtained for the whole network, proving the correctness of the proposed approach.

Despite the need for a sustainable energy resource, bioenergy gained its spotlight in the 2000s. Sugarcane is a significant crop in terms of sugar and energy capacity, and it can be an alternative energy source to mitigate the effects of climate change. Bioenergy production from sugarcane in Brazil is one of the most efficient. This production lends a centrality to biofuels' importance in confronting the effects of climate change. The present article reviews the Brazilian history of this crop as a biofuel source. We highlight the historical changes related to scientific, technological, industrial, and environmental advances since the beginning of the 20th century. We describe how creating governmental institutes and disseminating scientific knowledge strengthened public policies that led Brazil to occupy leadership positions in producing, distributing, and using bioenergy throughout the country. The compiled data shows the improvement and the new approaches needed in ethanol sugarcane. We developed a bibliometric analysis to evaluate Brazilian science's contribution to this process compared to other countries. Brazil's history of science and investments in sugarcane biofuel development for transportation may be divided into two phases: ethanol-only and flex-fuel cars. A third phase is starting, which is the ethanol-to-hydrogen era.

In this study, Silicon Carbide (SiC) nano-particle based serigraphic printing inks were formulated to fabricate highly sensitive and wide temperature range SiC printed thermistors. Initially, commercial silver ink was screen printed to fabricate inter-digitated electrodes (IDE’s) onto flexible Kapton® substrate via screen printing. Thermistor inks with different weight ratios of SiC nano- particles dispersed in polyimide resin matrix were fabricated. The SiC-polyimide temperature sensing inks were screen printed atop the IDE structures to form fully printed thermistors and encapsulated with a adhesive backed polyimide film for humidity inhibition. The high temperature tolerance of the Kapton® allowed the the sensors to be tested over a wide temperature range form 25◦C to 170◦C. The printed SiC thermistors exhibit excellent repeatability and stability over 15 hours of continuous operation. Optimal device performance was achieved with 30 wt.% SiC-polyimide ink. We report highly sensitive devices with a temperature coefficient of Resistance (TCR) of -0.556 %/◦C, a thermal coefficient of 502 K (β-index) and an activation energy of 0.08 eV which are comparable with printed thermistors previous reported. Further, the thermistor demonstrates an accuracy of ±1.35◦C which is well within the range offered by commercially available high sensitivity thermistors. SiC thermistors exhibit a small 6.5% drift due to changes in relative humidity between 10-90 %RH and a 4.2 % drift in baseline resistance after 100 cycles of aggressive bend testing at a 40°angle. The use of commercially available low cost materials, simplicity of design and fabrication techniques coupled with the chemical inertness of the Kapton® substrate and SiC nanoparticles paves the way to use all-printed SiC thermistors towards a wide range of applications where temperature monitoring is vital for optimal system performance.

In genetic conflicts, driver and killer elements achieve biased survival, replication, or transmission over sensitive and targeted elements through a wide range of molecular mechanisms, including mimicry. Driving mechanisms manifest at all organismal levels, from the biased propagation of individual genes, as demonstrated by transposable elements, to the biased transmission of genomes, as illustrated by viruses, to the biased transmission of cell lineages, as in cancer. Targeted genomes are vulnerable to molecular mimicry through the conserved motifs they use for their own signaling and regulation. Mimicking these motifs enables a selfish element to control core target processes, and can occur at the sequence, structure, or functional level. Molecular mimicry was first appreciated as an important phenomenon more than twenty years ago. Modern genomics technologies, databases, and machine learning approaches offer tremendous potential to study the distribution of molecular mimicry across genetic conflicts in nature. Here, we explore the theoretical expectations for molecular mimicry between conflicting genomes, the trends in molecular mimicry mechanisms across known genetic conflicts, and outline how new examples can be gleaned from population genomic datasets. We discuss how mimics involving short sequence-based motifs or gene duplications can evolve convergently from new mutations. Whereas, processes that involve divergent domains or fully-folded structures occur among genomes by horizontal gene transfer. These trends are largely based on a small number of organisms and should be reevaluated in a general, phylogenetically independent framework. Currently, publicly available databases can be mined for genotypes driving non-mendelian inheritance patterns, epistatic interactions, and convergent protein structures. A subset of these conflicting elements may be molecular mimics. We propose approaches for detecting genetic conflict and molecular mimicry from these datasets.

The digital transformation of critical infrastructures, such as energy or water distribution systems, is essential for their smart management. Faster issue identification and smoother services enable better adaptation to consumers' evolving demands. However, these large-scale infrastructures are often outdated. Their digital transformation is crucial to enable them supporting societies. This process must be carefully planned, providing guidance that ensures that the data they rely on is dependable and that the system remains fully operational during the transition. This paper presents a formal model that supports reliable data acquisition in legacy critical infrastructures, facilitating their evolution towards a data-driven smart system. Our model provides the foundation for a flexible transformation process while generating dependable data for system management. We demonstrate the model's applicability in a use case within the water distribution domain and discuss its benefits.

Native and exotic fruits from the Amazon have varied characteristics, with aroma being a decisive factor in attracting and accepting them and their medicinal use as a nutraceutical supplement. This work aimed to analyze the chemical constituents of the volatile concentrates of some Myrtaceous fruit species sampled in the Brazilian Amazon. The fruit's pulps were subjected to simultaneous distillation-extraction, and gas chromatography-mass spectrometry was used to analyze their volatile chemical composition. In the volatile concentrate of Eugenia stipitata (Araçá-boi) were identified α-pinene (17.5%), citronellyl butanoate (15.6%), and pogostol (13.5%) as primary constituents; in Eugenia uniflora (Ginja) were curzerene (30.5%), germacrone (15.4%), atractylone (13.1%), and (E)-β-ocimene (11.1%); in Myrciaria dubia (Camu-Camu) were α-pinene (55.8%), (E)-β-ocimene (13.1%), and α-terpineol (10.0%); in Psidium guajava (Goiaba) were (2E)-hexenal (21.7%), hexanal (15.4%), caryophylla-4(12),8(13)-dien-5-β-ol (10.5%), caryophyllene oxide (9.2%), and pogostol (8.3%); and in Psidium guineense (Araçá) were limonene (25.2%), ethyl butanoate (12.1%), epi-β-bisabolol (9.8%), and α-pinene (9.2%). The analyzed fruit species' volatile concentrates presented a significant diversity of constituents with a predominance of functional groups, such as monoterpenes, sesquiterpenes, and fatty acid derivatives, originating from the plant's secondary metabolism and representing significant importance regarding their nutritional and medicinal uses.

The aim of this study is to develop an African Neutral Network (ANN) model for predicting temperature and relative humidity in the greenhouse during the calendar year. Input data are ambient temperature and relative humidity outside of the greenhouse chosen for a typical meteorological year for the location of the object and the values of temperature and relative humidity of the air in the greenhouse, obtained as a result of a TRNSYS dynamic simulation of the thermal load of the facility. The goal was to show that our ANN model is capable of making predictions over extended time period. The TRNSYS model was created on a real object, taking into account all relevant parameters, in order to describe the dynamic behavior of the object as good as possible. The ANN model is formed of 3 layers, where the number of neurons in the hidden layer is obtained by training different types in order to reach the optimal number of neurons, and the values of the learning rate and epochs are also varied. The activation functions were respectively the hyperbolic tangent in the hidden layer and the linear function in the output layer. The Root Mean Square Error (RMSE), Mean Absolute Error (MAE) and Correlation Coefficient were chosen as the statistical criteria for measuring of the network performance. MAE and RMSE showed that the model with 6 neurons in the hidden layer gave the best results of data prediction in relation to the input data. Statistical analysis of output shows that, the RMSE and Mean Absolute Error (MAE) between the measured and predicted temperature was 0.3166 °C and 0.1002°, and the relative humidity RMSE and MAE was 5.9% and 3.4%, respectively, which can satisfy the demand of greenhouse climate control. The results of the study showed that the model can be used with satisfactory accuracy to predict the parameters of the internal environment, in relation to the complex simulation of the thermal load of the object.

Multilingual classrooms are becoming more common worldwide due to increasing mobility. Teaching foreign languages using the mother tongue in multilingual classrooms has become problematic; some of the significant concerns in Japanese language acquisition – such as the high contextuality of the language, vocabulary and kanji learning – make the direct teaching method confusing for many students, especially at the beginner and elementary levels. This article provides the preliminary results of a study carried out as a component of a more extensive empirical research project on instructional languages in classrooms teaching Japanese as a foreign language. It aims to gather, analyse and synthesise data from a survey conducted at a supranational level. The results of the first two sections of a questionnaire containing closed and open-ended questions were used for a quantitative analysis of the profile of Japanese language instructors with a focus on finding possible connections. The wide geographic distribution of the respondents (274 teachers from fifty-seven countries and regions) made it possible to collect data from a more representative sample and draw meaningful conclusions about the spread of multilingual classrooms that would be impossible in smaller-scale research. The study’s primary results show the proportion of multilingual classrooms among countries in different regions and across different educational stages, the distribution of Japanese language instructors in various educational stages depending on the highest level of formal education attained, and the proportion of part-time instructors working in different academic institutions.