Optimal planning and design of microgrids is a priority for electrification of off-grid areas. Indeed, according to one of the Sustainable Development Goals (SDG) 7, the UN recommends universal access to electricity for all but, at the lowest cost. To achieve this goal, several optimization methods with different strategies have been proposed in the literature. This paper proposes a microgrid installation and planning model based on a combination of several techniques. Python 3.10, the programming language, has been used in conjunction with machine learning techniques such as unsupervised learning based on K-means clustering and deterministic optimization methods based on mixed linear programming. These methods were complemented by the open-source spatial method for optimal electrification planning: onsset. The results obtained enabled us to simulate the model obtained, with a cluster considered as a case study, based on the elbow and k-means clustering method; then, in a second phase, to size the microgrid with a capacity of 40 kW, by optimizing all the resources available on the site: the example of the various resources in the case of Togo was considered (solar, wind, hydropower). This study therefore highlighted the optimal resources obtained by integrating battery systems by the optimization model formulated on the basis of the various technology costs, such as investment, maintenance and operating costs, based on the technical limits of the various technologies. For the optimum results obtained, solar systems account for 80% of the maximum load considered, compared with 7.5% for wind systems and 12.5% for battery systems. Next, an optimal microgrid connection model was proposed, based on the constraints of a voltage stability limit estimated at 10% of the maximum voltage drop. The substation capacity limit was also taken into account. The results obtained from the case studied enabled us again, to present selective results for load nodes in relation to the substation node. And finally, the spatial technology planning tool made it possible to obtain results on the different strategies for the various technologies required for the electrification planning study of the Togo case. The various results obtained from the different techniques provide the leads needed for a feasibility study for optimal electrification of off-grid areas, using microgrid systems.

Though nowadays germanium do not reach the range of popularity than other metals, i.e. rare earth elements, its utility in target industries makes of it also a strategic metal. Though germanium can be find in a series of raw materials, the principal source for its recovery is from secondary wastes of the zinc industry, and also, the recycle of germanium-bearing waste materials is becoming of interest. In this recovery, Hydrometallurgy is performing a key role to the successful achievement of this goal. The present work reviews the most recent applications (2023 and 2024 years) of hydrometallurgical operations on the recovery of germanium from different solid and liquid sources.

The liver diseases are posing serious threat to human health associated with abusive use of allopathy medicines, especially in developing economies like Pakistan. The strengthening of detoxification system using natural products might be a suitable option to minimize the liver problems. In this current research, Zingiber officinale and Azadirachta indica were evaluated for their hepatoprotective role. For the purpose, 20 Sprague Dawley rats were equally divided into four groups i.e., negative control, paracetamol positive control, 2.5% ginger and 2% neem powder, respectively. During 42 days study, the levels of bilirubin and liver enzymes significantly elevated due to liver damage. Although, the values dropped (20-25%) in treatment group. Serum glucose and serum lipid profile increased in positive control group, but reduced (5-10%) in both ginger and neem groups. The serum protein profile declined in liver damage group, however, improved (~5%) in treatment groups. The hematological parameters slightly declined in liver damage group, but increased in ginger and neem groups. Moreover, the white blood cells differential count and renal parameters showed abnormal values in liver damage group, but improved after treatment. This study is promising and highlighted the hepato-protective role of neem and ginger that may open several avenues of research.

A difficult open problem that has never been fully resolved in the literature to date is the behaviour of the (TDCDP) third approximation. As a giant step towards modern control theory, this cutting-edge paper will advance control theory and other relevant inter-disciplinary subjects. Because control theory is important in industry and engineering, this study will be especially beneficial to anyone working in these disciplines who wish to understand more about recent advances in control theory settings. In contrast, the wealth of applications of Fokker Planck Kolmogorov (FPK) equations numerous disciplines As a result, the study instantly gains more taste and credibility. At the end of the paper, there are several challenging open problems, some concluding remarks, and recommendations for further investigation.

The therapeutic, attenuative, and morphological effects of proprietary neural stem cell-derived extracellular vesicles (NSC EVs, AB126) produced by Aruna Bio, Inc. were assessed in a range of in vitro and in vivo models of stroke. We emphasize that modulation of neuroinflammation is a key target and suggest further studies to advance our understanding of the mechanisms of action and ultimately how best to dose and monitor the benefits of AB126 in stroke patients.

Introduction: Parameters used for neonatal mortality calculation vary among publications. Mortality in < 33 weeks gestational age at birth display global variations across different healthcare units. Objective: This study aims to explore trends in neonatal mortality among infants born preterm in the different units in Latin America and the Caribbean utilizing the EpicLatino Network Database in comparison to Canadian Neonatal Network (CNN) 2022. Materials and Methods: This study focused on an eight-year period, with a particular attention to mortality rates during the pre-pandemic (2015-2019) and pandemic/post pandemic (2020-2022) periods. Survival rates from CNN 2022 were included in the comparison analysis. Logistic regression analysis was confined to the 2020-2022 period. Adjustments were made for factors including gestational age, small for gestational age (SGA), Snape II score, inborn/outborn status, and center. As major malformations could account for mortality differences among units. The incidence of major congenital malformations, as defined by CNN, was compared among deceased patients. Results: A total of 15,454 records from 2015-2019 and 10,711 records from 2020-2022 were scrutinized. Overall, there were no significant differences in mortality rates between the two time periods (p=0.22). Moreover, the originating unit during the 2020-2022 period significantly influenced all statistical computations. Conclusions: Survival rates among infants < 26 weeks of gestation in Latin America and the Caribbean are on an upward trajectory, with the healthcare unit playing a pivotal role in this outcome within the EpicLatino database. Major malformations do not seem to be a significant contributing factor. These findings underscore the imperative of implementing quality improvement initiatives to elevate neonatal care standards in Latin America and the Caribbean.

Graph databases (GDBs) are becoming increasingly popular across scientific disciplines, being highly suitable to store and connect complex heterogeneous data. In systems biology, they are used as a backend solution for biological data repositories, ontologies, networks, pathways, and knowledge graph (KG) databases. In this review, we analyse all publications using or mentioning graph databases retrieved from PubMed and PubMed Central full-text search, focusing on the top 16 available GDB technologies. Relevant publications are then categorised according to their domain and application. We detail different approaches and highlight advantages of outstanding resources, such as UniProtKB, Disease Ontology, and Reactome, which provide graph-based solutions. We discuss ongoing efforts of the systems biology community to standardise and harmonise KG creation and the maintenance of integrated resources. Outlining prospects, including the use of GDBs as a way of communication between biological data repositories, we conclude that efficient design, querying, and maintenance of GDBs will be key for knowledge generation in systems biology and other research fields with heterogeneous data.

Artificial intelligence (AI) has emerged as a powerful tool for addressing the challenges posed by climate change and their impact on public health. By leveraging its capacity to analyze and predict climatic patterns, AI offers opportunities to enhance resource management and develop effective strategies for climate change mitigation. Moreover, AI can contribute to generating sustainable solutions that address the complex and interconnected nature of climate change. For example, AI can enable the optimization of energy consumption and facilitate the integration of renewable energy sources into existing systems. It can also support the development of climate models that provide timely and accurate predictions, enabling policymakers to implement proactive measures for disaster preparedness and response. Furthermore, AI-powered disease surveillance and mitigation techniques can improve public health outcomes by identifying patterns and trends in the spread of diseases in relation to climatic factors.However, the widespread adoption of AI-based solutions is not without challenges. Ethical concerns surrounding privacy and data ownership must be addressed, as the use of AI requires access to large datasets, raising potential privacy risks. Technical constraints, such as limited computational power and the need for sophisticated algorithms, also pose obstacles to the implementation of AI in climate change mitigation strategies. Furthermore, issues related to the accessibility and affordability of AI technologies must be resolved to ensure equitable distribution and maximize its potential impact on public health.To fully harness the power of AI in addressing climate change and improving public health outcomes, it is crucial to promote innovation, multidisciplinary collaboration, and open data science. Innovation can drive the development of new AI algorithms and technologies specifically tailored to address climate change challenges. Multidisciplinary approaches that bring together experts from diverse fields, including climate science, public health, and computer science, can foster a holistic understanding of complex systems and enable the design of comprehensive solutions. Finally, open data science practices, such as sharing data and algorithms, can facilitate collaboration and accelerate progress in mitigating climate change and its public health impacts.In conclusion, AI offers promising opportunities for effectively addressing climate change and its impact on public health. However, to fully realize its potential, it is essential to tackle ethical and privacy concerns, overcome technical constraints, and ensure accessibility and affordability. By promoting innovation, multidisciplinary collaboration, and open data science, we can unlock the transformative power of AI in mitigating climate change and improving public health outcomes.

Prostate cancer is the second most frequent malignancy (after lung cancer) in men worldwide. Prostate tissue biopsies are usually graded using scores according to the Gleason grading system. This Gleason score is the most popular prognostic marker that reveals the potential aggressiveness of the disease. However, inter-observer variability in rating by human assessors is a major limiting factor. Such variability could lead to missing a severe case or suggesting unnecessary treatments. This study explores the discriminative ability of artificial intelligence (deep learning models) for Gleason score assessment. The study was designed to use whole-slide images of digitized H&E-stained biopsies of prostate tissues to automate the grading process and provide a remotely accessible clinical decision support system. Custom convolutional neural network architectures were trained on 10,616 images of prostate tissues. Gaussian filters were applied to pre-process the images and improve model performance. Transfer learning was applied to train eight machine learning architectures namely: Xception, VGG16 & 19, ResNet101, MobileNet, DenseNet121, EfficientNetB5 & B7. Efficient NetB7 had the best performance 85.2% compared with ground-truth classification by experts. Performance improves as more data is available. The model was deployed and hosted as a web application API on Google cloud service to ensure remote access. Tissue biopsy images can be uploaded and the corresponding Gleason score recovered immediately. This system reduces diagnostics turnaround time, increase throughput, and compensate for limited skills, especially in low resource settings.

This paper shows the firsts results of a methodological approach in which Remote Sensing technologies (Satellite imagery and LiDAR) combined with Least Cost Path algorithm on GIS are being tested like tools to overcome locally-based interpretations about populational patterns and communication routes during Flavian municipality in the Comarca de El Condado region. The identification of fourteen hypothetical communication routes between already known archaeological sites thanks to a recent archaeological prospection, and the confirmation of three sections of them and a new archaeological site demonstrate that the combined use of the aforementioned technics has a very useful to delve more deeply, more widely and at a variety of different scales into the relation between the twelve known/selected Early Roman Empire sites and the surrounding landscape in the right bank of Guadalén River. It is expected that, in next phases, this methodological approach will allow us to go deeper in analysing and understanding spatial distribution, exploitation, and interrelation between different Early Roman Empire sites, helping us to fill the aforementioned gaps in our understanding of the archaeological continuum in the region reducing time and costs.

Rising demand and urbanization have led to the global increase and intensification of livestock production. Intensive production has harmful effects on the environment, public health (due to the emergence of zoonotic diseases), and animal welfare. In order to better understand how livestock production intensifies as countries develop and incomes rise, we examine the relationship between income per capita and intensification of poultry and cattle, using the states of India as a study region. We also replicate this analysis at the district level to test whether the relationship holds at different spatial scales. We identify outlying states and districts to see if there are policies that can keep agriculture production largely extensive, even as economic growth occurs. The results support the relationship of income being positively correlated with the proportion of livestock in intensive conditions. However, there are notable outlier states which have grown wealthy while still maintaining largely extensive production, indicating that there may be some cases where economic growth can occur without intensification.

The emerging industry of offshore wind turbines mounted on floating bases has garnered significant attention from both academia and industry. The desire to understand the complex physics of these floating structures has led to the development of numerical and physical modelling techniques. While physical testing has traditionally been employed, there is a growing focus on cost-effective and accurate high-fidelity numerical modelling as a potential alternative or supplement. However, commonly used numerical engineering tools in the offshore industry are considered mid- to low-fidelity and may lack the desired precision for floating offshore wind turbines (FOWTs). Given the complexity of these simulation codes, it is crucial to validate their accuracy. To address this, the International Energy Agency (IEA) Wind Technology Collaboration Programme initiated various research endeavors, including the Offshore Code Comparison Collaboration (OC3), Offshore Code Comparison Collaboration Continuation (OC4), Offshore Code Comparison Collaboration Continuation with Correlation (OC5), and the recent Offshore Code Comparison Collaboration Continued with Correlation and Uncertainty (OC6) projects. This study offers a comprehensive survey of the simulation tools available for FOWTs which were part of OC projects, focusing particularly on horizontal axis wind turbines (HAWTs) and highlighting their capabilities and fundamental theories.

Nanoindentation load-depth (P-h) plots is the basis for determination of mechanical properties of the samples and is especially vital for thin coatings deposited on substrates of various mechanical makeup from amorphous-brittle (borosilicate glass) to Silicon (having different crystallographic texture) to ductile substrates like stainless steel as well other aspects like indenter tip shape. The elastic-plastic response by simulated P-h plots as per modified empirical relations have been presented. The outcomes of this computational studies enlighten the database on the P-h plots for various coating/substrate systems and shall aid in the analysis of experimental P-h plots obtained,

We show succinctly a natural origin of the beautiful Gamma function in light of the WJ distribution, linking to quite distinct fields.

Modern research applies the Open Science approach that fosters the production and sharing of Open Data according to the FAIR (Findable, Accessible, Interoperable, Reusable) principles. In the geospatial context this is generally achieved through the setup of OGC Web services that implements open standards that satisfies the FAIR requirements. Nevertheless, the requirement of Findability is not fully satisfied by those services since there’s no use of persistent identifiers and no guarantee that the same dataset used for a study can be immutably accessed in a later period: a fact that hinders the replicability of research. This is particularly true in recent years where data-driven research and technological advances have boosted frequent updates of datasets. Here, we review needs and practices, supported by some real case examples, on frequent data or metadata updates in geo-datasets of different data types. Additionally we assess the currently available tools that support data versioning for databases, files and log-structured tables. Finally we discuss challenges and opportunities to enable geospatial web services that are fully FAIR: a fact that would provide, due to the massive use and increasing availability of geospatial data, a great push toward open science compliance with ultimately impacts on the science transparency and credibility.

Star copolymer films were studied for confirming the role of film morphology in antimicrobial activity previously reported. With this scope, films of a two-branches copolymer, namely m-PEG-(MMA-ran-DMAEMA)2, containing ≈ 40 % in mol of non-quaternized 2-(dimethylamino)ethyl methacrylate, were produced by using spin-coating, drop-casting and casting deposition techniques, thus obtaining ultra-thin, thin and thick films, respectively. The morphology is generally flat for thin and thick films, but it becomes substrate dependent for ultra-thin films where the film planarization effect is not efficient. Mechanical properties of such films were investigated by Force Volume Maps in both air and liquid. In air, ultra-thin films are in the substrate-dominated zone and thus the elastic modulus E is overestimated, while E reaches its bulk value for thin and thick films. In liquid (water), E follows an exponential decay for all films with a minimum soaked time t0 of 0.37 and 2.65 h for ultra-thin and thin and thick films, respectively. After this time, E saturates to a value in average 92 % smaller than that measured in air due to films swelling. Such results confirm the role of morphology envisaged in literature, suggesting also an additional role of mechanical properties in the antimicrobial activity.

Traditional methods of non-metallic materials joining for industrial uses are limited to lasers, or induction or conduction heating. The precision and efficiency for large-scale applications are difficult to be achieved at the same time. Here in this paper, we report a precise microwave welding method induced by localized surface plasmon of metallic macro-gaps under microwave excitation. The proposed method utilizes energy from well-developed commercial microwaver, and benefits from the precision of localized surface plasmon, an oscillating electron cloud excited by electromagnetic waves, which is currently under hot investigation only at micro- or nano-scales. The method is applied to the welding of polymers to solve the problems of complex processing equipment and high processing energy consumption in the traditional welding process, so as to cope with the growing energy and environmental crisis. Finite element numerical simulations are used to study the distribution characteristics of electric fields and temperature fields. The results show that the process is a high quality, efficient, low consumption and environmentally friendly green process compared to traditional polymer welding methods.

Coral reefs are one of the most productive yet vulnerable ecosystems on Earth. An important step in understanding the functioning of coral communities is studying the environmental impact on the state of reefs. The present study aimed to assess the impacts of the water temperature, precipitation, wave action and population density on the seasonal bleaching, partial and complete mortality of shallow-water branching corals of Pocillopora verrucosa species complex. The present study was conducted at the Dam Bay research station (Nha Trang Bay) from 26 April 2020 to 2 April 2021. Throughout the study the percentage of bleached coral colonies varied from 1 to 41.5% with two peaks, in autumn (October) and spring (April). Rates of the development of partial mortality varied from 0 to 10%, with a pronounced peak in December. At the end of the experiment, the percentage of coral colonies suffering from partial mortality reached 47%. Only 4,5% of experimental colonies died by the end of the study. Analysis revealed that water temperature and partial mortality are the drivers of bleaching, while wave action, temperature and bleaching are the factors with a significant impact on partial mortality. In the present study, the main cause of coral death was the development of algal fouling at the sites of colony lesions, which gradually spread over the entire surface of the colony. We showed also that the impact of individual stress on mortality prevailed over the impact of seasonal bleaching and partial mortality events.

The possibility of a shock wave recovery at a discrete closed interface with a heated gas has been investigated. A two-dimensional model applied to conditions of optical discharges featuring spherical, elliptical, and drop-like configurations demonstrated that non-symmetry in the shock refraction contributes to the specific mechanism of recovery other than simply its compensation. Even though the full restoration of the hypersonic flow state doesn’t occur in a strict sense of it, clear reverse changes toward the initial shape of the shock front eventually take place, thus creating an appearance of a full recovery seen in experiments. From analysis for different interfaces symmetries, the factors determining the recovery dynamics are identified. The results are directly applicable to the problem of energy deposition into a hypersonic flow, however it can be useful anywhere else where the flow modifications following the interaction are important. The dimensionless form of the equations allows applications on any scale other than that demonstrated for the optical discharges.

With the trend of public infrastructure becoming more sustainable, large multi-purpose sports venues (LMPSVs) have become one of the world's most complex architectural projects and one of the landmark buildings of an international city. LMPSVs will lead the world in sustainable design, construction and operational innovations, and play a crucial role in raising awareness of sustainability around the world. System Thinking (ST), System Dynamics (SD) and Sustainable System Development (SSD) theories are three interrelated concepts that together form a methodological framework for solving complex system problems and driving strategies. The purpose of this study is to examine how LMPSVs can implement environmental, social, governance, and innovation (ESGI) enterprise transformation strategy (ETS) based on a sustainable systems development (SSD) framework. In view of the current global environmental challenges and social responsibility requirements, the motivation of this study is to provide an integrated transformation pathway for LMPSVs to achieve the goal of sustainable development and to contribute to the field of related disciplines. The methodology of this research adopts a combination of literature review and case study analysis, and the theoretical basis is mainly drawn from cutting-edge research in the fields of sustainable development, corporate social responsibility (CSR) and environmental management. Then, by analyzing successful transformation cases in China, we extract data and information to explore the application and effectiveness of these strategies in practice. The results of the study show that by implementing ESGI-based transformation strategy, LMPSVs can not only make significant progress in terms of environmental protection, social responsibility, and governance structure, but also drive long-term corporate growth and competitiveness through innovation. Specifically, these results are realized in terms of increased efficiency in energy use, improved waste management, community involvement and increased stakeholder satisfaction. The study concludes by emphasizing that the SSD-based ESGI Transformation Strategic framework provides a sustainable pathway for LMPSVs. In the future, the extension of this transformation strategy will help a wider range of industry sectors to achieve sustainable development goals, and has wide application potential and far-reaching social significance.

Increased inflammation and heightened physiological stress reactivity have been associated with pathophysiology of depressive symptoms. The underlying biological mechanisms by which inflammation and stress can affect neurogenesis is through alterations of the kynurenine (KYN) pathway, which is activated under stress. Meanwhile, n-3 polyunsaturated fatty acids (n-3 PUFA) supplementation has anti-inflammatory properties and may enhance stress resilience. Whether n-3 PUFA alters stress responsivity KYN is unknown. This placebo-controlled trial examined the effect of n-3 PUFA on KYN metabolism, inflammation, depressive symptoms and mood; and stress-induced changes following a laboratory stressor. Using a placebo-controlled design, 47 healthy male adults were received 4g/d of Omega-3, or a placebo for 12 weeks. A significant group-by-time interaction was found for inflammation markers - gp130 (F= 7.07, p = 0.011), IL-6R alpha (F= 10.33, p = 0.003), and TNF_RI (F= 10.92, p = 0.002). No significant group-by-time interactions were found for mood or depressive symptoms, except for Hedonic Tone (F= 6.50, p = 0.014), neither for KYN metabolites and stress-induced changes to the KYN metabolites and mood following a laboratory stressor. Overall, elevating n-3 PUFAs levels in healthy males ameliorates inflammatory markers but does not ameliorate KYN metabolism, depressive symptoms, mood, or stress responsivity KYN metabolism and mood. The study was registered at ClinicalTrials.gov with identifier NCT05520437 (30/08/2022 first trial registration).

Based on the insight gained from single jet analysis performed earlier [1], CFD analysis on turbulent jets impinging on one another at an angle was performed. Multiple impingement angles were considered for this study to gain better understanding of the parameters affecting resultant jet growth and velocity distribution. From the study of single jet, it was concluded that the SST k-ω turbulence model was the ideal turbulence model capable of accurately predicting the flow physics of the jets exiting a fully developed pipe at low Reynolds number. Hence, for the study of impinging jets, SST k-ω turbulence model was used to study the velocity and jet growth characteristics. It became evident that the mesh alignment with the velocity vector at exit of the pipe domain plays a crucial role in the accuracy of the results. The parameter used to evaluate this condition was identified as False Diffusion and was observed to affect the TKE parameter significantly. Methods to reduce false diffusion are also discussed in this article. Based on the mesh obtained from the grid sensitivity study, jets impinging at 30, 45 and 60 degrees at Reynolds number of 7500 were numerically analyzed. It was observed that the profile of the resultant jet closely matched with the prediction of elliptical profile predicted by past researchers, [2] and [3]. Also, it was seen that higher jet growth was predicted in case of jets impinging at a higher impingement angle.

Introduction: The COVID-19 pandemic prompted a global shift to distance learning, profoundly affecting children's mental health. In Saudi Arabia, remote education was implemented on March 8, 2020, impacting students across various factors, such as age, vaccination status, and school system. This shift lasted between 1.5 to 2.5 years, influencing students’ experiences differently. This study explores the psychological impact of distance learning on children and adolescents, with the goal of informing mental health advocacy and guiding educational strategies in scenarios where distance learning becomes essential. Methods: We conducted a cross-sectional study using an online survey distributed to parents of children aged 6 to 18 in the major metropolitan areas of Jeddah and Riyadh. The survey collected demographic information and included the validated Arabic version of the Vanderbilt ADHD Diagnostic Rating Scale. This tool assesses behavioral challenges, anxiety, and symptoms of attention deficit hyperactivity disorder (ADHD). Results: The study found that 71.6% of families reported a positive experience with distance learning. A significant correlation was identified between parents' marital status and children's ability to cope with remote education. Interestingly, students without ADHD symptoms experienced three times more negative outcomes than those with ADHD. However, despite reporting fewer negative experiences, children with ADHD symptomatology faced heightened symptom severity and academic difficulties. The results further indicated that 5.4% of students were classified with ADHD predominantly inattentive presentation, 1.8% with predominantly hyperactive/impulsive presentation, and 3.9% with combined ADHD presentation. Additionally, 7.2% of students screened positive for oppositional defiant disorder, 1.5% for conduct disorder, and 6.6% for anxiety or depression. Conclusion: This study is the first comprehensive, multi-city investigation in Saudi Arabia to analyze the relationship between distance learning experiences, sociodemographic factors, and mental health symptoms in children. The findings provide essential insights for future research and offer a foundation for developing targeted interventions to support children’s mental health and education in the region.

Haug and Tatum [1, 2] have recently outlined a possible path to solving the Hubbletension within Rh = ct cosmology models using a trial-and-error algorithm for redshift scaling, 1 specifically z = (R_h/R_t) − 1 and z = (R_h/R_t)^{1/2}-1 . Their algorithm demonstrates that one canstart with the measured CMB temperature and a rough estimate of H_0. Based on this approach, they nearly perfectly match the entire distance ladder of observed supernovae by identifying a single value for H_0. However, their solution is based on a simple numerical search procedure, which, although it can be completed in a fraction of a second on a standard computer, is not a formal mathematical proof for resolving the Hubble tension.Here, we will demonstrate that the trial-and-error numerical method is not necessary and that the Hubble tension can be resolved using the same Haug and Tatum type R_h = ct model through a closed-form mathematical solution. Furthermore, we will prove that this solution is valid for a much more general case of any cosmological redshift scaling consistent with: z = (R)h/R)t)^x − 1. Haug and Tatum have only considered the most common assumptions of x = 1 and x = 1/2 .Our solution involves simply solving an equation to determine the correct value of H0. This is possible because an exact mathematical relation between H_0 and the CMB temperature has recently been established, in combination with the linearity in an R_h = ct model. We also demonstrate that a thermodynamic form of the Friedmann equation is consistent with a wide range of redshift scalings, namely: z = (R_h/R_t)^x − 1.

Community resilience represents an important concept in the comprehensive approach to disaster management. It is assumed that optimal community resilience can mitigate negative impacts and enable adaptation, thereby reducing the negative consequences of future disasters. The measurement of community resilience to disasters has advanced over the past two decades, primarily through the use of indicators that measure community resilience indices. The Baseline Resilience Indicators for Communities (BRIC) represent an increasingly popular and frequently used quantitative method for measuring community resilience indices to disasters. This literature review was conducted to examine and assess the use and adaptation of the BRIC method in measuring community resilience. The review comprehensively analyzes relevant scientific papers, extracting and synthesizing the most important findings from the studies, which provided the necessary data to meet the objectives of the literature review. A total of 37 relevant studies were identified for analysis in the review. The indicators used were examined, including their selection, grouping, and evaluation procedures, as well as the calculation of the appropriate index. The review also covered the method of data collection needed to measure the impact of indicators on resilience, as well as the shortcomings of this process. The measurement of community resilience to disasters is a contemporary issue, with several detected shortcomings in the process itself. The need to adapt the BRIC method to the local context has been established. Improving the process of determining indicators and measuring indices would lead to broader use of the method in efforts to reduce disaster risk and enhance resilience to disasters.

CXC chemokine receptor 1 (CXCR1) is an important regulator for neutrophil granulocyte activation through binding to the ligand interleukin-8 (IL-8). Upon binding to IL-8, CXCR1 activates downstream signaling, critical for innate and adaptive immune responses. The IL-8-CXCR1 axis also plays an important role in tumor progression, especially in the tumor microenvironment. CXCR1 antagonists or anti-IL-8 monoclonal antibodies (mAbs) have been developed and evaluated in clinical trials for inflammatory diseases and tumors. In this study, we developed novel mAbs for mouse CXCR1 (mCXCR1) using the N-terminal peptide immunization. Among the established anti-mCXCR1 mAbs, Cx₁Mab-8 (rat IgG_2b, kappa) recognized mCXCR1-overexpressed Chinese hamster ovary-K1 (CHO/mCXCR1) and mCXCR1-overexpressed LN229 (LN229/mCXCR1) by flow cytometry. The dissociation constant (K_D) values of Cx₁Mab-8 for CHO/mCXCR1 and LN229/mCXCR1 were determined as 5.1 × 10⁻¹⁰ M and 1.3 × 10⁻⁹ M, respectively. These results indicated that Cx₁Mab-8 is useful for detecting mCXCR1 by flow cytometry with high affinity and can obtain the proof of concept in preclinical studies.

This study assessed the financial management practices and challenges of food cart businesses in Cabanatuan City, Nueva Ecija. The study used a descriptive research design and structured surveys and questionnaires to gather quantitative data from 20 food cart businesses. The data were analyzed using statistical tools such as weighted means, frequencies, and percentages to provide a comprehensive overview of these small enterprises' financial practices and challenges. Key findings highlight that while many businesses demonstrate basic financial literacy, significant gaps exist in financial record-keeping, budgeting, and revenue management. The study emphasizes the importance of improving these practices to ensure the sustainability and growth of food cart businesses. The research contributes to the broader discourse on small business management and economic development by identifying common challenges and offering targeted recommendations. The findings underscore the need for targeted interventions, such as financial training and policy support, to enhance the financial acumen of food cart owners. This study adds to the existing body of knowledge as it provides practical insights that can benefit business owners, policymakers, and community stakeholders in fostering a more resilient and economically vibrant local economy.

Artificial intelligence (AI) shows great potential in medical diagnosis and drug analysis. Through deep learning technology, AI can automatically extract features from large amounts of complex medical data, significantly improving diagnostic accuracy and drug development efficiency. Especially in drug target discovery and antiviral peptide classification, AI technology can accelerate data processing and prediction, helping researchers identify potential therapeutic molecules more quickly and optimize the drug development process. This study proposes and validates a Deep learn-based model, deep-Avpiden, to improve the classification and discovery efficiency of antiviral peptides (AVPs). By using sequential convolutional networks (TCNs), the model outperforms traditional recurrent neural networks (RNNs) and long short-term memory networks (LSTMs) in capturing long-term dependencies and parallel computing capabilities. In terms of dataset, we used AVPs and non-AVPS samples from multiple databases, totaling 5,414 cleaned and de-weighted peptide sequences for model training after data preprocessing and embedding. The Deep-AVPiden model has been shown to outperform existing advanced classifiers in experiments, and its effectiveness has been verified by accuracy, precision, recall rate, and area under the ROC curve (OC-ROC). In addition, to accommodate computing resource constraints, we propose an optimized version of Deep-AvPIDen (DS), which utilizes Deep separation convolution technology to significantly reduce computing resource consumption. Through the online application platform, researchers can efficiently classify antiviral proteins and discover new AVPs. Future research could further optimize the model's computational efficiency, handle larger data sets, and expand its potential for biomedical problems such as drug combination prediction and new drug discovery.

Digital transformation in government services is seen as a progression towards offering more efficient and convenient services. In the wake of the COVID-19 pandemic, many governments worldwide have expedited the digitisation of their services to facilitate social distancing. Digital transformation encompasses the shift from manual, face-to-face services to automated, online-based systems. This process occurs in three stages: digitisation, digitalisation, and digital transformation. However, the varying stages of digital government implementation across countries impact service outcomes differently. Little research has been devoted to focusing on the outcome metrics crucial for the success of digital services, particularly in Kuwait. Moreover, although the existing literature has explored some metrics, specific metrics have been neglected. This study aimed to investigate current trends and preferences in digital government services usage using empirical quantitative data gathered from users of digital services in Kuwait. Specifically, the aim is fourfold: (i) to identify crucial outcome metrics for the success of digital services, (ii) to assess how users evaluate these services according to these metrics, (iii) to examine significant differences between digital transformation and digitalisation services, and (iv) to develop and validate a model for evaluating the success of digital transformation services. To achieve the study's objectives, 378 users of digital government services were surveyed quantitatively. This study found that users primarily access services through smartphones and applications, underscoring the need for mobile optimisation. There was a marked preference for real-time, automated services, with dissatisfaction for those requiring lengthy approval processes. Six key metrics were identified and grouped into three domains: service-related (customer satisfaction and service quality), convenience-related (accessibility and ease of use), and security-related (perceived security and perceived trust). Digital transformation services outperformed digitalisation services in five key areas: customer satisfaction, service quality, accessibility, ease of use, and perceived security, except perceived trust, which remained consistent across both service types. Several recommendations were proposed to advance government digital transformation services, boost efficiency, and enhance the user experience.

A sublingual vaccine comprising Poly(I:C) adjuvant and influenza HA antigen was evaluated for safety in both mice and macaque monkeys relative to its intranasal counterpart. Safety was assessed with harmful effects corresponding to upregulation of the inflammation-associated genes: Saa3, Tnf, IL6, IL1b, Ccl2, Timp1, C2, Ifi4, Aif1, Omp, Nos2, and/or Gzmb in mice and SAA2, TNF, IL6, IL1B, CCL2, TIMP, C2, AIF1, and GZMB in macaques. Quantitative gene expression analyses were performed using RT-qPCR with RNA samples from four tissues: olfactory bulb, pons, lung, tongue, and (submandibular) lymph node from both mice and macaques. In mice, the intranasally delivered vaccine markedly upregulated the inflammation-related genes in the olfactory bulb 1 day and 7 days after vaccination. The adverse effects of intranasal vaccination were also observed in macaques, however to a lesser extent than in mice. The intranasal vaccination also upregulated these genes in the pons of both mice and macaques. In contrast, the sublingual vaccine did not adversely affect the olfactory bulb or pons in either mice or macaques. The intranasally administered vaccine significantly upregulated these genes in the lungs only 1 day after vaccination, but not 7 days later, in both mice and macaques. We conclude that intranasal vaccination results in unfavorable side effects corresponding to upregulated inflammatory genes in the brain (olfactory bulb and pons). Sublingual vaccination, however, did not induce these side effects in either mice or macaque and was hence evaluated as safe.

In today’s business landscape, customer retention has become a critical factor for sustainable growth. Many companies continue to focus on acquisition, which leads to high costs and constant customer turnover. This article highlights the importance of retention, proposing a shift in focus toward loyalty as the key to maximizing customer lifetime value (LTV). Improving retention not only increases LTV but also reduces acquisition costs, enhances virality, and provides financial stability. This paper introduces a scientific approach that allows companies to identify the underlying causes of low retention through observation, hypothesis formulation, and controlled experimentation. Using tools such as data analysis and A/B testing, companies can iteratively optimize their retention strategy, adjusting interventions in real-time based on the results obtained. Continuous experimentation emerges as an indispensable tool for navigating market complexity, enabling organizations to learn and adapt quickly. This data-driven approach not only improves retention but also drives long-term growth by building strong relationships with customers. In an increasingly competitive environment, companies that prioritize retention and experimentation are better positioned to achieve resilient and profitable growth.

In this paper, we present an improved 100CMM regenerative thermal oxidizer (RTO) designed for low-emission combustion, capable of processing over 95% of volatile organic compound (VOC) gas emissions at generating sites. The existing RTO system features a cylindrical drum structure that cyclically introduces and discharges VOC gas into a rotating disk, achieving excellent energy efficiency with a heat recovery rate exceeding 95%. However, the driving force exerted on the rotating disk in the RTO combustion chamber causes increased wear around the rotating shaft, leading to untreated gas being released through the outlet due to the channeling phenomenon. Additionally, prolonged use can result in operational issues such as rotation stoppages or explosions caused by pollutant discharge, dust accumulation, and thermal expansion at high temperatures of up to 800°C. To address these challenges, we designed an enhanced rotating plate drive unit while ensuring the stable operation of the RTO combustion chamber. Considering that the combustion chamber can reach temperatures of up to 920°C when processing high-concentration VOC gas, the gas burner has been designed with a diameter of 125 mm, and the outlet dimensions are set to 650 mm x 650 mm to effectively discharge high-temperature waste heat. The heat storage material in the combustion chamber is configured with a ceramic block thickness, and the outer diameter and height of the combustion chamber are set at 250 mm, 2,530 mm, and 1,875 mm, respectively, to optimize the gas residence time and the insulation material thickness. Empirical experiments were conducted to analyze changes in VOC removal efficiency, nitrogen oxide emission concentration, and total hydrocarbon (THC) concentration, ultimately evaluating the economic performance of the 100CMM RTO.

Graph unlearning has emerged as a crucial technique in privacy-preserving applications, particularly in scenarios where sensitive data must be erased from graph-based systems. This paper explores the fundamental concepts, challenges, and methodologies associated with graph unlearning, including its application to domains such as social networks, financial transaction systems, and healthcare networks. By delving into various algorithms, including local and global unlearning methods, we analyze the trade-offs between accuracy, privacy, and computational efficiency. The paper further investigates the security risks associated with graph unlearning, including adversarial and inference attacks, and proposes mitigation strategies to safeguard unlearning processes. We also examine the unique challenges posed by federated learning systems, where unlearning requires coordination across decentralized clients. Finally, the paper evaluates graph unlearning techniques using performance metrics such as time complexity, accuracy, and privacy guarantees, supported by real-world examples from diverse applications. The findings emphasize the importance of developing robust, scalable, and secure unlearning mechanisms to ensure data privacy and compliance with regulations. Evaluation and metrics for Graph Unlearning will also be discussed in this paper.

Chitosan spherical scaffolds, derived from the deacetylation of chitin, are natural polymers with significant potential, though challenges remain in optimizing their properties. The use of chitosan as a carrier for the controlled release of iron chloride is not yet fully established, despite iron’s critical role in various essential biological processes, including as a component of metalloenzymes and in the maintenance of life. Methods: This study aimed to develop a novel protocol for synthesing chitosan scaffolds and to characterize their properties using analytical techniques. Additionally, the release profile of iron was modeled using two primary controlled-release mathematical models. Results: The results demonstrated successful synthesis and physicochemical characterization of the chitosan sphere scaffolds. These scaffolds exhibited appropriate topography for iron loading and cellular interaction, as confirmed by SEM analysis, and contained functional groups as identified by FTIR. The scaffolds were also semi-crystalline (XRD), showed controlled degradation, and were confirmed to be non-toxic biomaterials. Furthermore, the modeling of the controlled release of iron chloride adsorbed on the scaffold surface, as well as the modeling of iron chloride specimens using the MEDUZA software, was successfully conducted. A theoretical curve was generated from the experimental dose-response data collected over time, considering variations in pH and medium concentration. Conclusions: In conclusion, a novel protocol for chitosan-based carriers was successfully developed, enabling thorough physicochemical characterization and modeling of both absorption and controlled release.

The modern world is gradually moving towards a global civilisation that is automated and propelled by technology. Artificial intelligence (AI) is a highly advanced technology that has been acknowledged as a major innovation. The incorporation of this technology into the banking sector has enhanced operational procedures in relation to customer satisfaction, virtual assistance, and risk reduction. This machine is employed to streamline activities and improve how decisions are made in this sector. This study investigates the potential benefits and challenges of implementing artificial intelligence in the banking sector. The methodology ensures a comprehensive understanding of the implementation of artificial intelligence in banking by showcasing its effectiveness, precision, and efficiency, as well as the opportunities it presents. The study data were collected from secondary sources, such as recent publications that demonstrate applications of artificial intelligence from five different banks, as well as the examination of industry reports. The main findings of this study demonstrate the substantial improvement of administrative operations through AI-driven technology, which effectively automates activities that include inputting data and handling information. As a result, the frequency of mistakes caused by people has reduced, leading to a 30% decrease in operational expenditures for all evaluated institutions. However, the banking industry admits the challenges it encounters, such as issues with confidentiality and a scarcity of skilled employees. In the financial services industry, the integration of artificial intelligence into the banking sector is perceived as an advantageous chance instead of a harmful danger, with a greater potential for beneficial impact.

Often, in biology, we are faced with the problem of exploring relevant unknown biological hypotheses in the form of myriads of combinations of factors/genes/proteins that might be affecting the pathway under certain conditions. In colorectal cancer (CRC) cells treated with ETC-1922159, many genes were found up and down regu- lated, individually. A recently developed search engine ranked combinations of ATP- binding cassette (ABC) transporters-X (X, a particular gene/protein) at 2nd order level after drug administration. These rankings reveal which ABC-X combinations might be working synergistically in CRC. If found true, oncologists can further test the com- bination of interest in wet lab and determine the mechanism of functioning between the ABC and X. In this research work, we cover combinations of ABC with ubiquitin- conjugating enzymes (UBE2), Interleukin (IL), BCL and Caspase (CASP).

The amount of solar energy produced is directly proportional to the surface area of solar panels exposed to sun rays. To increase the productivity of solar panels, a number of techniques are proposed by curving the surface or protruding the panel surface to maximise the surface area, e.g. Protruding panel surfaces with shapes such as pyramidal, cone, spherical cap, sinusoidal wavy curve, etc. These techniques are analysed to determine whether the panel surface area increases. The geometrical design analysis showed that, depending on the chosen surface curving method, the panel can achieve a remarkable increase in surface area.The system advisor model was used to assess a sample of solar cells with standard measurements of 6 by 6 inches that were organised in a zigzag pattern with different angles of inclination (10°, 15°, 20°, 25°, 30°, and 35°). Overall, the maximum power pump and annual AC energy performance increase by 1.4%, 4.2%, 6.8%, 10.8%, 14.9%, and 21.6%, respectively, over a one-year period of productivity. However, by applying the concept of solar panel efficiency degradation due to tilting solar panels at an angle by Mamun et al. (2022), for each 5° increase in tilt angle beyond the ideal 10°, the efficiency decreases by approximately 0.76%. In conclusion, the overall efficiency is greater than that of standard flat solar panels, provided the tilt angle is within a reasonable range.

This paper presents an advanced software tool for precise laser beam propagation analysis, focusing on the calculation of the M2 value, a key measure of beam quality. Developed in Python, the software integrates libraries like NumPy, Matplotlib, and SciPy for robust data handling and accurate polynomial fitting. It features a user-friendly interface for easy data input, analysis, and visualization, making it accessible to both professionals and novices. The tool has been rigorously validated against theoretical models (M2=1) and experimental data (showing M2=1.2548 and 1.3166), ensuring high accuracy and reliability. It visualizes beam width data and fitted polynomial curves, aiding in assessing beam propagation characteristics and optimizing laser systems. Future enhancements include additional beam quality metrics, machine learning integration, and cloud-based functionality. This tool significantly advances laser beam analysis, benefiting research and industrial applications by improving performance and efficiency. The software is available at DOI: 10.5281/zenodo.13325911

This comprehensive analysis aims to offer valuable insights into the safety profiles of these glucocorticoids, facilitating the identification of compounds with potentially reduced adverse effects. This study investigates the toxicity profiles of various glucocorticoids, utilizing predictions from the pKCSM Server. Among the glucocorticoids examined, Dexamethasone, Triamcinolone, Hydrocortisone hemisuccinate, Paramethasone, Fluprednisolone, and Flumethasone emerge as potentially less toxic, displaying favorable scores across diverse parameters such as Max. Tolerated Dose (human, MRT), Oral Rat Acute Toxicity (LD50), and Oral Rat Chronic Toxicity (LOAEL). Notably, Hydrocortisone hemisuccinate and Triamcinolone stand out for their high tolerability capacity based on the Max. Tolerated Dose (human, MRT), suggesting enhanced safety profiles. These findings contribute insights into selecting glucocorticoids with optimal safety and tolerability for potential therapeutic applications.Further research and clinical investigations are warranted to validate and refine these findings, ensuring the responsible and effective use of glucocorticoids in medical practice.

Maxwell's energy-momentum tensor cannot be used as is in Einstein's equation for general relativity in the presence of sources. In this case, its four-divergence is non-zero, whereas the tensors in the equation must have this characteristic. However, the sun emits streams of ionized particles, gases are present within galaxies, material transfers in the form of ionized plasma can occur in binary star systems, and so on. These charges cannot be neglected in the study of space-time in these regions. Here, we present a modified version of this tensor that eliminates this flaw, provided that the potentials satisfy the Lorenz gauge. The distribution of sources will also be analyzed in light of fluid mechanics, allowing us to account for its influence in terms of generated pressure.

The recent mountain pine beetle outbreaks have caused widespread mortality among lodgepole pine trees in western North America, resulting in a reduced population of surviving trees. While previous studies have focused on the cascading impacts of these outbreaks on the physiology and growth of the surviving trees, there remains a need for a comprehensive study into the interactions among various physiological traits and the growth in post-outbreak stands. Specifically, the relationship between chemical (primarily terpenes) and anatomical (mainly resin ducts) defences, as well as the allocation of non-structural carbohydrates (NSCs) to support these defence modalities, is poorly understood. To address these gaps, we conducted a field survey of surviving lodgepole pine trees in post-mountain pine beetle outbreak stands in western Canada. Our retrospective analysis targeted to determine correlations between the post-outbreak concentrations of monoterpenes, diterpenes, and NSCs in the phloem, and the historical resin duct characteristics and growth traits before and after the outbreak. We detected strong correlations between post-outbreak concentrations of monoterpenes and historical resin duct characteristics, suggesting a possible link between these two defence modalities. Additionally, we found a positive relationship between NSCs and the total concentrations of monoterpenes and diterpenes, suggesting that NSCs likely influence the production of these terpenes in lodgepole pine. Furthermore, historical tree growth patterns showed strong positive correlations with many individual monoterpenes and diterpenes. Interestingly, while surviving trees had enhanced anatomical defences after the outbreak, their growth patterns did not vary before and after the outbreak conditions. The complexity of these relationships emphasizes the dynamics of post-outbreak stand dynamics and resource allocation in lodgepole pine forests, highlighting the need for further research. These findings contribute to a broader understanding of conifer defenses and their coordinated responses to forest insect outbreaks, with implications for forest management and conservation strategies.

HIGHLIGHTS Mach's principle is linked with inertia and the mass around. Nowadays, physicists believe its effect is infinitesimal, so Mach's principle is simply ignored. This paper looks at the consequence of applying Mach's principle. It could replace dark matter. ABSTRACT After seeing the history of Mach's principle, we will work out a new model of galaxies inspired by Mach’s principle, which is more satisfactory than current dark matter models. This new model is just maths and needs an explanation. One possible explanation is obviously that Mach's principle is at work in a galaxy.

Substance use disorder (SUD) is a global health crisis that is becoming increasingly prevalent among younger generations and impacting the overall health of millions of people worldwide. Traditional treatment methods, including cognitive-behavioral therapies and medicinal-assisted treatments, often face limitations such as inconsistent efficacies and varying degrees of accessibility. Thus, there is a clear need for a new and innovative treatment strategy. Music therapy has recently gained attention through research as a promising non-pharmacological supplement to strengthen conventional SUD treatment methods. This review explores the potential benefits of music therapy in reducing substance cravings, alleviating depressive symptoms, and improving emotional expression among patients in the rehabilitation phase of SUD recovery. We review evidence from various studies and clinical trials to evaluate the efficacy of music therapy in improving standard treatment outcomes, with the results indicating that music therapy could be an effective complement to traditional treatment methods while noting that its efficacy could vary depending on the individual and type of intervention provided. The benefits of music therapy include accessibility of treatment for diverse patient groups and the potential for highly individualized care, although more research is needed to compare the efficacies of specific music treatment types for certain conditions and patient populations. Further research is also needed to validate the neurobiological mechanisms of music therapy, as well as increased communication between music therapists worldwide to enforce consistency in treatment methods and share learnings in this growing field.

This communication is to summarize our single center experience on applications of anti-IL-1 biologic response modifiers on autoimmune and autoinflammatory conditions in children. We present our rationale for off-label utilization of Anakinra and discuss evolving treatment paradigms that warrants further research and validation. Based on our observations and successful treatment outcomes, we advocate future multilateral efforts to liberate access to anti-IL-1 medications to control inordinate and detrimental inflammation in children.

This paper systematically discusses the application of reinforcement learning in automatic driving system. Reinforcement learning frameworks show significant advantages in optimizing decision making, predictive perception, path planning, and controller design, exceeding the limitations of traditional supervised learning methods. The paper highlights the critical role of components such as scene understanding, positioning, and map making in autonomous driving systems, which provide reliable environmental awareness through deep learning and sensor fusion technologies to support intelligent decision-making in complex urban environments. In addition, the paper discusses innovative approaches to safety reinforcement learning to reduce risk in autonomous driving and ensure that systems adhere strictly to safety constraints while maximizing expected rewards. These findings provide an important theoretical and practical basis for further improving algorithm robustness, managing multi-agent interactions, and integrating ethical considerations in the future.

The distribution of zakat, which is still carried out directly through mosques or zakat amil bodies, can hinder the payment process due to inaccurate calculations and difficulties in finding zakat amil institutions. In the digital era, information technology is very important in the management of zakat, alms, and infaq. Therefore, a zakat information management system was created. The e-Zakat program, developed using the waterfall method, plays an important role in five main aspects of zakat management: muzaki and mustahiq data collection, zakat collection, zakat distribution, mustahiq development, and reporting. The use of information technology in this program is expected to increase efficiency, accountability, transparency, as well as the reach of zakat and muzaki involvement.

The deaf-mute and individuals with hearing disabilities who communicate through sign language should not be overlooked or excluded. It is a social responsibility to strive for an inclusive world without inequality. Advances in technology offer various solutions to address the communication gap, one of which is the use of computer-based sign language recognition systems. This project proposes a Malaysian Sign Language recognition model utilizing MobileNetV1, a convolutional neural network-based algorithm, to interpret sign language in real-time settings through a website application using Streamlit. The outcome of the model test shows that it has achieved a recognition rate of 96 percent. Although the proposed model has demonstrated the ability to recognize sign language, it is suggested that further improvement can be achieved by enhancing the quality and diversity of the dataset. The implementation of a more comprehensive dataset would lead to improved performance and increased accuracy of the model. This project underscores the importance of considering and accommodating the needs of the deaf-mute and individuals with hearing disabilities and highlights the potential of technology to bridge communication barriers and achieve a more inclusive society.

In this study, we utilized the UniProt database to extract breast cancer genes Total 2658 genes in Homo sapiens are obtain. Then 166 genes are taken and after delating duplicates 158 genes were remains. These genes were then analyzed for their biological pathways using Gene Ontology enrichment analysis through the Genecodis platform, resulting in the identification of 12 unique genes involved in disease pathways. Protein-protein interaction (PPI) network analysis was conducted using the STRING database and Cytoscape software, identifying ANLN,TREM1,LZTFL1,OXSM,PLA2G3,TAS2R13,ABCB10,ECT2,TRPC,BCAS3,PLA2G3,ZDHHC7 and ERBB2 as potential gene targets for breast cancer.

We solve the problem of Apollonius by applying the Lorentz transformation within the frame- work of special relativity to go to a frame of simultaneity, where the solutions are the circum- center. We transform back to get the solutions in a general frame. We show that the solutions in a general frame are the foci of the ellipse going through the centers of the given 3 circles.

Objective To investigate nailfold capillary parameters in community-dwelling individuals aged over 60 years who have hypertension and do not exercise regularly. Furthermore, the study examined the correlations between capillary function and other health-related indicators. Design A single- center pilot trial Setting Faculty of Health, Tsukuba University of Technology, Japan Participants hypertensive community-dwelling elderly people Intervention Microcirculation was observed before and 1 min after arm-curl exercise by means microscopy of capillary with non-exercised limb. Additionally, we examined other health-related indicators. Outcome measures: Acute effects of reperfusion on nailfold density, flow, and diameters. Secondary outcomes included the correlations between microvascular parameters and other health-related indicators. We hypothesized that brief exercise could enhance microcirculation reperfusion and correlate with other health-related parameters.　 Results: There were 20 participants with a mean (SD) age of 67.1 (5.8) years. The capillary flow rate changed from 2.3±6.7 to 2.7±0.2 log µm/s (P

In genetic conflicts, driver and killer elements achieve biased survival, replication, or transmission over sensitive and targeted elements through a wide range of molecular mechanisms, including mimicry. Driving mechanisms manifest at all organismal levels, from the biased propagation of individual genes, as demonstrated by transposable elements, to the biased transmission of genomes, as illustrated by viruses, to the biased transmission of cell lineages, as in cancer. Targeted genomes are vulnerable to molecular mimicry through the conserved motifs they use for their own signaling and regulation. Mimicking these motifs enables a selfish element to control core target processes, and can occur at the sequence, structure, or functional level. Molecular mimicry was first appreciated as an important phenomenon more than twenty years ago. Modern genomics technologies, databases, and machine learning approaches offer tremendous potential to study the distribution of molecular mimicry across genetic conflicts in nature. Here, we explore the theoretical expectations for molecular mimicry between conflicting genomes, the trends in molecular mimicry mechanisms across known genetic conflicts, and outline how new examples can be gleaned from population genomic datasets. We discuss how mimics involving short sequence-based motifs or gene duplications can evolve convergently from new mutations. Whereas, processes that involve divergent domains or fully-folded structures occur among genomes by horizontal gene transfer. These trends are largely based on a small number of organisms and should be reevaluated in a general, phylogenetically independent framework. Currently, publicly available databases can be mined for genotypes driving non-mendelian inheritance patterns, epistatic interactions, and convergent protein structures. A subset of these conflicting elements may be molecular mimics. We propose approaches for detecting genetic conflict and molecular mimicry from these datasets.

Understanding clinical significance of variants of unknown significance (VUS) reported in next-generation sequencing (NGS) has become essential in cancer treatment. Our study examined six widely used in silico tools: PolyPhen-2, Align-GVGD, MutationTaster2, CADD, REVEL, and Chat-GPT. We utilized a dataset of gene variants known to potentially affect immune therapy. No single tool could comprehensively determine mutation variant pathogenicity. MutationTaster2021 showed the highest overall accuracy and MCC among the tools. Notably, REVEL and Chat-GPT exhibited 100% specificity, suggesting their proficiency in accurately identifying pathogenic variants and minimizing false positives. In contrast, CADD displayed optimal sensitivity, making it suitable for effectively ruling out benign variants.

Based on recent progress in cosmological thermodynamics, we present a new thermody- namic formulation of the Friedmann equations in the new Haug-Tatum cosmology model, as well as for other similar models put forward in the literature from different solutions to Einstein’s field equation. Since the CMB temperature has been measured much more accu- rately than the Hubble constant, we demonstrate that our thermodynamic formulation of the Friedmann equation dramatically narrows the acceptable range for the critical density of the universe. Furthermore, we show how our thermodynamic formulation leads to a more precise cosmological constant estimate.

In many countries, increasing concern for animal welfare is driving retailer commitments and government legislation that aim to improve the lives of farmed fish. One aspect of fish welfare involves stunning fish prior to slaughter. The feasibility of stunning depends on the species of fish and physical farm characteristics. In this article, we provide an overview of stunning before slaughter in European sea bass and sea bream aquaculture, one of the largest finfish farming industries in the developed world that does not yet stun most of its production. Sea bass and sea bream stunning necessitates the use of electrical stunning equipment aboard harvest vessels, often a significant distance from the shoreline; this presents an interesting engineering and policy challenge. Together, Türkiye, Greece, Spain, and Italy produced over 400,000 t of sea bass and sea bream in 2020. In Türkiye and Greece, farms are numerous and located very close to the shoreline. In Spain and Italy, farms are few and located far from the shoreline. The highest average production is found in farms from Türkiye (1,000 t) and Spain (1,300 t, and lower average production is found in Greece (300 t) and Italy (350 t). Producer progress towards the installation of electrical stunning appears comparatively well-developed for Türkiye, Spain, and Greece, though we emphasise that producers and other stakeholders require continued support to realise this opportunity. Producers in Italy appear slower to make progress on this aspect of animal welfare and may require additional support.

The Casimir effect can either work over very short distances or at very low temperatures. At the cosmic scale, we naturally deal with long distances, but at the same time, we encounter extraordinarily low temperatures, namely the CMB (Cosmic Microwave Background) tem- perature. Recently, there has been increased interest in the Casimir effect and its implications in cosmology. Here, we briefly demonstrate that the luminosity and radiation pressure of the CMB is mathematical identical to a theoretical Casimir effect within the Hubble sphere, or actually our solution seems to be valid for any Schwarzschild black hole. The Casimir effect forevery Schwarzschild black hole is identical. This also include the Hubble sphere if we treat it as a Schwarzschild black hole that is related to increased interest in black hole cosmology.

Caused by age or trauma, collapsed connective tissue can cause nerve entrapment and damage within the tarsal tunnel. Tarsal tunnel syndrome is relatively underdiagnosed. This study presents an intervention targeting damaged tissues surrounding the nerves and replacing the structural cushioning with a Wharton’s jelly tissue allograft. The eight selected patients from four clinical sites had tarsal tunnel-related defects. Patient outcomes were tracked on a 90-day calendar utilizing the Numeric Pain Rating Scale (NPRS) and the Western Ontario and McMaster University Arthritis Index (WOMAC). All patients had failed standard care practices for at least six weeks. Each patient received a Wharton’s jelly tissue allograft to sites around the affected tarsal tunnel. No patients experienced adverse reactions. Percent change calculated from the initial application to the 90-day follow-up showed an improvement of 59.43% in NPRS and a 37.58% improvement in WOMAC. This study provides evidence that WJ allograft applications are safe, minimally invasive, and efficacious for patients who have failed standard care treatments for tissue defects associated with Tarsal Tunnel syndrome. Limitations include the small cohort size and nonblinded nature. The results of this study warrant further research to confirm the efficacy, optimal dose, protocol, and durability of Wharton's jelly.

The hyperspectral vegetation index was defined based on the distinctive features of the spectral curve. In alignment with the growth and development characteristics of cotton, the spectral reflectivity of the cotton canopy was computed at different growth stages. The aim of this study was to clarify the association between cotton yield and canopy spectral indices and to develop yield estimation models utilizing hyperspectral imaging. The ASD Field Spec Pro VNIR 2500 spectrometer radiometer was employed to collect spectral reflectance data from cotton canopies at various growth stages. Using spectral analysis techniques, quantitative models were developed based on hyper-spectral vegetation indices, including Normalized Difference Vegetation Index (NDVI) (NDVI) and Radar Vegetation Index (RVI) to extract characteristic information from the cotton canopies. Following thorough testing and precise monitoring of the estimation models, the most optimal models representing cotton canopy structure parameters were identified. Results demonstrate that the power function model, relying on NDVI, provides the most accurate forecasting for Leaf Area Index (LAI)). Additionally, the exponential function model based on RVI proves to be the most effective for predicting cotton unit area above-ground fresh biomass, while another exponential function model based on RVI is identified as the best for predicting cotton unit area above-ground fresh biomass. Clearly, the application of hyper-spectral remote sensing technology enables the analysis, simulation, assessment, and providing scientific basis for precision cotton planting and cotton field management strategies.

The dermatological manifestations of Long Covid (LC) have languished in the shadows of chronic fatigue and brain fog. Yet they are all linked by gut dysbiosis and the cytokine triad of TNF-α, IL-1β, and IL-6. The gut microbiome common not only to LC, psoriasis, AA, and vitiligo but also to neurodegenerative disease has been recently described. This gut microbiome induces an altered tryptophan metabolism linked to autoimmune disease. SARS CoV2 invades enterochromaffin cells rich in ACE2 receptors and curtails absorption of the essential amino acid tryptophan and subsequent synthesis of serotonin and melatonin. This review suggests that an etiologic prebiotic (d-mannose)/probiotic (lactobacilli, bifidobacteria)/postbiotic (butyrate) approach to autoimmune skin disease that improves intestinal barrier integrity and that suppresses the triad of TNF-α, IL-6, and IL-1β may enhance or even eliminate the traditional immunotherapy of targeted monoclonal antibodies, Janus kinase inhibitors, and steroids. Health benefits of this approach extend well beyond suppression of autoimmune skin disease.

Upon the outbreak of the COVID-19, countries worldwide developed policies with the goal to introduce restrictive measures geared towards mitigating the spread of the virus. Although these health initiatives were put in place through top-down public directives, they relied heavily on the cooperation of citizens who had to be willing to carry them out. As a consequence, we could observe differences in compliance with governmental restrictions within and between countries. Increasing policy stringency was the method adopted overall to promote people’s compliance. This article used survey data from 10308 participants in Brazil to examine whether there was a positive correlation between policy stringency and compliance with restrictive measures to reduce the spread of COVID-19. The results revealed, however, that there was no direct influence of policy stringency on people’s health behaviors. Accordingly, I hypothesized that individual differences in personality traits were one of the drivers behind policy compliance, as they would support self-interests such as the duty to support authorities as well as the perceived health risks of certain behaviors and ultimately motivate compliance. The findings’ implications for both compliance research and for authorities wanting to nurture voluntary compliance with public health orders are discussed and suggestions are provided.

This work introduces a novel facial image capture system that utilizes computer vision technology and artificial intelligence for real-time detecting, tracking, and capturing of human faces. The objective of this study is to address the challenges posed by poor-quality facial images in biometric authentication, especially in passport photo acquisition and recognition. By combining face-aware capture technology with AES encryption for secure image storage, we present a completely open-source hardware solution that consists of a Jetson processor, a 16MP autofocus RGB camera, a custom enclosure, and a touch sensor LCD for user interaction. Pilot data collection demonstrates the system's ability to capture high-quality images, achieving a 98.98% accuracy in storing images of acceptable quality. The integration of AES encryption ensures data security, making the proposed system suitable for real-time applications in other domains beyond identity verification in passport applications, such as security systems, video conferencing, etc

Albert Einstein, shortly after publishing his General Relativity Theory (GRT) applied it to the entire universe in a paper of 1917. Einstein assumed that such a universe was static in time and possessed a uniform distribution of matter on the largest scales, obtaining a static and finite universe of spherical spatial curvature of radius R. Although this model was refuted by Edwin Hubble's discovery of the expansion of the universe, it is still often studied as a theoretical framework for some problems, such as the twin paradox. This paper will show that Einstein's static universe model leads to a privileged frame of reference, so that any observer moving at the speed v will be able to measure speeds of light other than c depending on the direction of beam transmission. The above will refute the validity of the application to this closed and static universe of the Special Relativity Theory (SRT) proposed by Einstein in 1905 in his article . In addition, a new synchronization convention and new coordinate transformations will be deduced, the "generic" transformations, which will replace those of Lorentz. Finally, the twin paradox in this universe will be solved by making use of them.

Exosomes, a subset of extracellular vesicles, have emerged as pivotal mediators of intercellular communication, revolutionizing our comprehension of cellular interactions. Their diverse cargo, comprising proteins, nucleic acids, and bioactive molecules, plays a crucial role in various physiological and pathological processes. In the intricate landscape of adult neurogenesis, exosomes wield significant influence, actively participating in the generation of new neurons within the adult mammalian brain. Originating predominantly from non-niche cells, these vesicles contribute substantially to the regulation of neuroinflammation, thereby impacting neurogenesis and offering therapeutic promise for neurological disorders. In the specific context of Parkinson's disease (PD), exosomes assume a multifaceted role, prominently implicated in the propagation of α-synuclein oligomers and the orchestration of neuroinflammation. Stem cell-derived exosomes present themselves as promising therapeutic agents, capable of reshaping the microenvironment, repairing neuronal damage, and mitigating apoptosis. The ongoing exploration of exosomes continues to unravel intricate biological processes, paving the way for innovative medical interventions and treatments, particularly within the challenging landscape of neurodegenerative diseases such as PD. The comprehensive understanding of exosomal functions holds the potential to advance our therapeutic approaches, offering new avenues for intervention and treatment strategies in the realm of neurodegenerative disorders.

Among the number of hurdles that the vaccines based in modRNA platforms have been facing, there is now another critical one: immune imprinting which decreases even more the effectiveness of the modRNA Covid vaccines.

The initiation of micro-cracks in concrete is primarily due to its brittleness, which causes severe impacts on the overall behavior of the concrete. However, incorporating fibers in concrete could significantly improve its mechanical properties. The current study demonstrates the influence of two types of fibers on the mechanical properties of concrete. Nylon Fiber Threads (NFT) and Nylon Fiber Strands (NFS) at a fiber content of 2.5 kg/m³ were incorporated in the concrete mix. Concrete with a compressive strength of 30 MPa and a water-cement ratio of 0.4 was produced to investigate the fresh and mechanical properties of conventional and nylon-fiber reinforced concrete (NFRC). The concrete prims and cylinders were tested for compressive, splitting, and flexural strength using ASTM standards (ASTM C-39, C-496, and D-790, respectively). It was found that NFT-reinforced samples achieved higher mechanical properties of concrete (13.05%) compared to NFS-reinforced samples. Test results showed that incorporation of nylon fibers (NF) in concrete decreased the compressive strength of cylindrical and cubical specimens by 0–10% and 5–15%, respectively. However, it increased the splitting tensile and flexural strengths by 0-15%, and 5-15% respectively. Furthermore, the incorporation of NF in concrete significantly improved the ductility and delayed the crack initiation in concrete.

In the domain of financial trading, where accuracy and swift response to data discrep- ancies are paramount for maintaining clienttrust, our research paper delves into the development of a real-time alert system utilizing SpringBoot, a framework renowned for its robustness and adaptability in enterprise applications. We embark on a comprehensive journey, beginning with addressing thefoundational challenges inherent in monitoring trade inquiries - the necessity for real-time processing, unwavering data accuracy,and ensuring unwavering system reliability. The study then methodically transitions to the architectural design, where we explore howSpringBoot’s capabilities are optimally utilized to meet these challenges. Following this, we delve into the im- -plementationphase, detailing the strategic selection of compatible technologies and methods for effective data management and discrepancydetection. The paper culminates in a thorough evalu- ation of the system, where we assess performance across various operationalscenarios, scrutinize the accuracy of the discrepancy detection mechanisms, and integrate real-world feedback from users in thetrading sector. This holistic approach not only highlights the versatility and efficiency of SpringBoot in creating reliable alert systems in the high-stakes world of financial trading but also serves as a detailed guide for similar endeavors in this field

This review paper delves into the multifaceted aspects of pineapple cultivation, focusing on morphology studies, harvesting challenges, and mechanization efforts. Pineapple, renowned for its commercial value and unique flavor, holds a prominent position in global agriculture, with India alone producing 19.64 lakh tonnes annually. However, the hilly terrains of regions like northeastern India pose significant hurdles to traditional harvesting methods, necessitating innovative solutions. Understanding the morphology of pineapple plants is crucial for optimizing cultivation practices and designing efficient harvesting equipment. Insights from various studies shed light on leaf structure, fruit maturity, and growth patterns, providing valuable information for engineering tailored solutions. Mechanization endeavors, including semi-mechanized harvesting machines and semi-manual harvesters, demonstrate promising results in improving efficiency and reducing labor-intensive practices. Despite challenges such as increased crop losses and operational costs, continued research and development in mechanization hold the key to sustainable pineapple cultivation. This paper underscores the importance of integrating morphology studies and mechanization efforts to address the unique challenges faced by pineapple farmers, particularly in hilly terrains, and highlights the need for ongoing innovation to ensure the long-term sustainability of pineapple cultivation.

Four fundamental forces of nature are too important to say because they dominate the formation and evolution of the universe. However, until now, their origins and physical essences have not been answered with wide acceptations. This paper gives new explanations for the origins and essences of these four forces based on different understandings, which can easily explain that all of the four fundamental forces of nature are originated from the electric force only and so can be unified to be one force. First of all, the gravitational force is a synthesized electric force produced by a huge amount of electric charges via particular movements and distributions. Depending on inference of nuclear structure, which has strong supports by observed phenomena, the strong and weak forces are deduced to be electric forces too. The introduced new understandings can explain observed confusing phenomena simply and effectively, such as “galaxy shape”, “dark matter”, “dark energy”, “gamma-ray bursts” in nuclear fission or fusion and from black holes, and so on. The author wrote this paper is for helping to find the natural truth earlier.

Objectives: The aim of this study was to determinate the validity and the reliability of the self-administered Timed Up and Go (TUG) test, a gold standard test for fall risk screening, when compared to the traditional face-to-face assessment carried out by a physiotherapist. Methods: A total of 37 community-dwelling adults, mean age 61.78±6.88, 73% female, who took part in fall risk screening actions in the central region of Portugal, were assessed. The protocol included sociodemographic and history of falls questions, the Self-Efficacy for Exercise questionnaire, the Activities and Participation Profile Related to Mobility (PAPM) and three functional tests, namely the 10-Meter Walking Speed (10-MWS), TUG and 30 Seconds Sit to Stand (30s STS) tests. Within an interval of 18-24 hours after the face-to-face moment, the participants were instructed to self-administer the TUG test at home. The validity and reliability of self-administered TUG test were examined using the limits of agreement, clinically acceptable limit, intra-class correlation coefficients (ICC), paired t-tests and Pearson´s coefficient correlation (r). Results: The limits of agreement for self-administered assessment were within the clinically acceptable limits. The average result of the face-to-face TUG test and self-administered TUG test was 7.47 ± 2.45 and 7.57 ± 3.10 seconds, respectively. When comparing the two evaluations, they were strongly associated (r=0.716, p<0.001), with an excellent ICC of 0.82 (0.65-0.91), for a 95% confidence interval. Conclusion: The use of the self-administered TUG test for the screening of risk of fall, using low-cost technology, appears to be valid and reliable in community-dwelling adults aged 50 and over.

This paper proposes an innovative postulate based on experimental observations, namely, that the speed of light can vary between two inertial reference systems. This postulate is defined as the principle of relative change in the speed of light, which refreshes the concept of absolute speed of light in traditional physics. By integrating the principle of the invariance of the speed of light with the principle of relativity in relativity theory, several important conclusions are derived: space and time must be capable of and proportionally expand and contract. Between two inertial reference systems with different relative speeds of light, objects have an energy difference of k^2 times, which induces a natural tendency for objects to move towards a state of lower energy. The acceleration is only related to the relative change rate of the speed of light in vacuum space and is independent of the mass of the object. The kinetic energy obtained by the object comes from the reduction of internal energy of the object, emphasizing the key role of energy conversion in this process. The paper provides a new theoretical perspective for explaining the physical mechanisms of universal gravitation and dark energy.

Introduction and importance: Congenital bicuspid aortic valve (BAV) is a common cardiac malformation predisposing individuals to aortic stenosis, regurgitation, and aortopathy. This risk persists even after aortic valve replacement (AVR). Case presentation: We report a case of a male in his 60s with a history of BAV who underwent bioprosthetic aortic valve replacement (BVR) and ascending aorta/root repair in 2014. The patient was noncompliant with follow-up and presented nine years later with severe bioprosthetic aortic stenosis and an 8.0 cm ascending aortic aneurysm with no symptoms. Emergent redo BVR and aneurysm repair were successful. Clinical discussion: It should be emphasized that successful outcomes for BAV patients require a lifelong commitment to surveillance, even after surgical intervention. Noncompliance can lead to life-threatening consequences like bioprosthetic valve deterioration or progressive aortic dilation. Conclusion: This case highlights the importance of early BAV diagnosis for ongoing monitoring, accessible follow-up care after complex cardiac procedures, and addressing patient barriers to treatment adherence.

This paper discusses the application and advantages of artificial intelligence technology in digital media interactive product design. Firstly, the development background of artificial intelligence technology and its promoting effect on design innovation is introduced, and the application of new technologies, such as generative adversarial networks in art creation and design personalization, is definitely analyzed. It then explores in detail the ability of AI to break traditional constraints in interactive design, innovate design, and optimize user experience, especially in digital media. Finally, the case study of Microsoft Cortana shows the method of classifying and processing user queries by machine learning system and its experimental results. The research of this paper provides the theoretical basis and empirical support for the application of artificial intelligence technology in the future interactive design of digital media and has important academic and practical significance.

The energy transition towards Net Zero Emission by 2060 hinges on the renewable energy power plants in Indonesia. Good practices in several countries suggest a peer-to-peer (P2P) energy trading system using blockchain technology, supported by renewable energy (solar panels), an innovation to provide equal access to sustainable electricity while reducing the impact of climate change. The P2P energy trading concept has a higher social potential than the conventional electricity buying and selling approach, such as that of PLN (the grid management concept), but does not have a sharing element. This model implements a solar-powered mini-grid system and produces a Smart Contract that facilitates electricity network users to buy, sell, and trade electricity in rural areas via smartphones. This study aims to analyze the stakeholders' perceptions of the peer-to-peer (P2P) energy trading model using blockchain technology in Gumelar District, Banyumas Regency, Central Java Province, Indonesia. The stakeholders include households, the Ministry of Energy and Mineral Resources (ESDM), the State Electricity Company (PLN), the Institute for Essential Services Reform (IESR), Awina Company, and IPB University. The strength factors of this model are the freedom to generate and sell electricity (0.1) and transparency in electricity usage and sales by disclosing the amount, duration, and price of electricity (0.1). Regarding weakness factors, this model is primarily suitable for the lower middle class residing in rural or remote areas (0.02). Additionally, the intermittent electricity production to meet the substantial demand is a weakness (0.03). The opportunity factor for the model is the increase in public awareness and cooperation in using environmentally friendly, pollution-free electricity (0.12). Furthermore, there is an opportunity for additional income (0.12) and new business investment (0.12). Regarding threat factors, the model faces significant threats from the implementation aspect involving multiple parties (0.04). There is a potential threat in the form of losses for state utilities such as PLN or individuals who have already established electricity infrastructure if this program is implemented on a large scale (0.04). This model is located at the coordinate point (-0.40; 0.31), placing it in quadrant II. This indicates that the model should apply the Stability Strategy and focus on the Selective Maintenance Strategy for improvement. The stability strategy goal is to maintain the current situation by leveraging opportunities and addressing weaknesses. For effectiveness and efficiency, the strategy emphasizes fostering collaboration with PLN, which holds the legal authority as the sole utility company in Indonesia with an extensive electricity network, as well as advocating for regulations that support the independent purchase and sale of solar-powered electricity, particularly in areas without PLN network coverage.

This paper presents a mathematically rigorous investigation into the incompleteness of Einstein-de Sitter spacetime. The incompleteness of the spacetime is proved using results regarding isometries between connected Semi-Riemannian manifolds following the computation of the Einstein tensor of the Einstein-de Sitter spacetime. Various properties of the Einstein-de Sitter spacetime apart from its incompleteness is also discussed based on its incompleteness with the help of various results of Semi-Riemannian manifolds. Also, few properties of spacetime which cannot be concluded from the incompleteness of the spacetime is also discussed.

Preoperative assessment is crucial in surgical care, traditionally relying on physical examinations and paper-based questionnaires. The emergence of digital tools like Pathpoint® ePOA represents a significant advancement, aiming to enhance the efficiency, accuracy, and standardisation of preoperative evaluations. Pathpoint® ePOA is a cloud-based platform designed to integrate seamlessly with Electronic Health Records (EHRs), providing a comprehensive, data-driven approach to preoperative assessments. It supports improved risk stratification, optimised resource allocation, and enhanced patient engagement through features such as customisable templates and real-time data integration.Current research highlights that digital preoperative tools like ePOA offer notable advantages, including increased clinical capacity, better complexity stratification, and improved patient follow-up. Despite these benefits, gaps remain in comparative studies, detailed clinical outcomes, and patient engagement strategies, indicating areas for further exploration. Pathpoint® ePOA adheres to rigorous safety standards and risk management protocols, ensuring reliability and data security while contributing to improved surgical outcomes. The benefit-risk ratio for ePOA is favourable, underscoring its potential to advance preoperative care by optimising clinical workflows and enhancing patient safety.

This study discusses the application of deep learning technology in network intrusion detection systems (IDS) and focuses on a new model named CNN-Focal. First, through the review of traditional IDS technology, it analyzes its limitations in dealing with complex network traffic. Then, the design principle of the CNN-Focal model is described in detail, which uses threshold convolution and SoftMax multi-class classification technology to effectively improve abnormal traffic detection's accuracy and efficiency. The experimental results show that CNN-Focal performs well on the open data set, demonstrating the potential and advantages of its application in the natural network environment and providing a new perspective and method for further research of deep learning in the field of network security in the future.

The Diaphorina citri Kuwayama (D. citri) is one of the major pests in the citrus industry, which spreads Citrus Huanglongbing disease. It has developed resistance to chemical insecticides. Therefore, searching for greener solutions for pest management is critically important. The main aim of this study was to evaluate the repellent and insecticidal efficacy of essential oils (EOs) from four species of Myrtaceae plants: Psidium guajava (PG), Eucalyptus robusta (ER), Eucalyptus tereticornis (ET), and Baeckea frutescens (BF) against D. citri and to analyze their chemical composition. GC-MS analysis was performed, and the results indicated that the EOs of PG, ER, ET, and BF were rich in terpenoids, ketones, esters, and alcohol compounds. The repellent rate of all four EOs showed that it decreased with exposure time but increased with concentrations of EOs. Repellent rates ranged from 80.50% to 100.00% after treating D. citri for 6 hours with four EOs at 100% concentration and decreased to 67.71% to 85.49% after 24 hours of exposure. Among the compounds from the EOs tested, eucalyptol had the strongest repellent activity, with a 24-hour repellency rate of 100%. The contact toxicity bioassay results showed that all EOs have insecticidal toxicity to D. citri; the LC50 for nymphs was 36.47-93.15 mL/L, and for adults, it was 60.72-111.00 mL/L. These results show that when PG is used as the reference material, both ER, ET, and BF EOs have strong biological activity against D. citri, which provides a scientific basis for the further development of plant-derived agrochemicals.

This study is based on the BP neural network regression model optimised by genetic algorithm and dedicated to predicting the amount of car purchase, this study is important for all parties in the automotive industry. By plotting the violins of six indicators, including gender, age, annual salary, credit card debt, net worth, and car purchase amount, we found that, except for gender, the other data showed a trend of dense in the middle gradually decreasing to the upper and lower sides, with an overall normal distribution. The correlation analysis shows that the amount of car purchase has a high positive correlation with age (0.63), followed by annual income (0.62), the correlation between net worth and the amount of car purchase is 0.49, while the correlation between credit card debt and the amount of car purchase is low (0.03). In the experimental part, we analyse the predicted-actual values of the training and test sets in comparison and find that the model predicted values are very close to the actual values. The RMSE of the training set is 11.559 and the RMSE of the test set is 11.4835, which is not much different from each other, indicating that the model has good generalisation ability. In addition, the R2 of both the training and test sets is 1, indicating that the model fits well. The MAE of the training set is 8.2512 and the MAE of the test set is 9.578; the MBE of the training set is -4.3035 and the MBE of the test set is -2.4547.These metrics indicate that the model performs well in predicting the amount of car purchase. In conclusion, this study provides an effective and reliable method to predict the amount of car purchase, creating a useful bridge between car manufacturers, dealers and consumers.

This study presents a groundbreaking approach in the field of gaming AI, focusing on the classic game” Pacman” through the lens of DRL integrated with advanced optimization techniques. The core of the research involves adapting DRL models for” Pacman”, utilizing the ESO for hyper- parameter tuning. These novel adaptations significantly enhance the AI agent’s performance, demonstrating a remarkable improvement in adaptability, responsiveness, and efficiency within the game environment. A pivotal aspect of this research is the innovative integration of metaheuristic optimization techniques into the DRL framework, a first in the domain of Atari gaming AI. This integration has proven essential in fine-tuning the DRL models, leading to a more effective and dynamic gaming experience. The study thoroughly evaluates and compares the performance of these algorithms, providing empirical support for their effectiveness and setting a new benchmark in AI-driven game development. The implications of this research extend beyond gaming AI, opening up possibilities for future exploration in several directions. Expanding DRL models to other complex gaming environments, continuous algorithmic enhancements, real-time learning adaptations, and applying these principles to robotics and autonomous vehicles are examples. The research also emphasizes ethical and responsible AI use in gaming to address fairness and addiction issues.

Ten new Schiff bases, including thiocarbohydrazone derivatives (1–10), were synthesized using an efficient, uncomplicated, and environmentally friendly approach using the reaction of alkyl-substituted aldehydes. The thiocarbohydrazones that were obtained were derived from o-phthalaldehyde. The chemical structures of the compounds were identified by the utilization of UV-Vis spectroscopy, Fourier transform infrared (FT-IR), ¹H nuclear magnetic resonance (¹H NMR), ¹³C nuclear magnetic resonance (¹³C NMR), and elemental analysis methods. The thermal stability of thiocarbohydrazones was examined using thermogravimetric analysis (TGA-DSC). Investigations were conducted on urease inhibition tests, pharmacokinetic property research, and molecular docking. The collection of samples with the urease enzyme revealed significant molecular docking findings, with MolDock scores ranging from -153 to -189. The compounds have the potential to be effective drug candidates for treating certain diseases, as indicated by the consistent results of molecular docking, urease inhibition tests, and pharmacokinetic characteristics investigations.

Verification of inclusivity of molecular detection methods gives indications on the reliability of viral infections diagnosis because of the tendency of viral pathogens to undergo sequence variation. This study was aimed to select inclusive probe based reverse transcription quantitative PCR (RT-qPCR) assays for the diagnosis of the most widespread and detrimental viruses infecting honeybees, namely the acute bee paralysis virus (ABPV), the black queen cell virus (BQCV), the chronic paralysis bee virus (CBPV), the deformed wing virus variants A (DWVA) and B (DWVB), and the sacbrood virus (SBV). Therefore, detection methods previously described were re-evaluated in silico for specificity and inclusivity. Based on this evaluation, selected methods were modified or new ones were designed and tested in duplex RT-qPCR reactions. The limits of detection (LODs), effect of multiplexing on sensitivity and viral RNA quantification potential in bees and hive debris were assessed. This study made available diagnostic assays able to detect an increased number of virus variants compared to previously described tests and two viral pathogens in a single PCR reaction.

Coal bottom ash (CBA) is a byproduct of coal-burning power plants. This material can be used as a fine aggregate replacement in concrete to reduce global natural material depletion. Concrete usage is increasing rapidly; subsequently, the industry’s carbon footprint is increasing. Using CBA in the construction industry will reduce the technical and economic problems associated with power plants by reducing solid waste. This project aimed to determine if adding new sustainable materials, such as CBA, to concrete will reduce natural raw material usage, energy consumption, and greenhouse gas emissions while improving performance. This study included two projects: comparing increased CBA content to the two-control project and determining the optimum content based on the compressive strength. The optimum CBA content is 50%, which reduces fine aggregate usage in a concrete mix by 50% while maintaining equivalent or better concrete strength than a pure Portland concrete mix without CBA. The air content of the concrete mix containing % CBA decreased with increased CBA content and compressive strength, possibly due to the spacing factor of the voids in the mix and CBA’s porous and fineness behavior. The CBA optimum content had a unit weight lower than the controls for both projects, which makes the CBA mix a lightweight concrete. Using this material can significantly reduce natural material usage and environmental harm by reducing CBA waste disposal and improving concrete performance.

Mesenchymal stem cells due to their multipotent ability are considered one of the best candidates to be used in regenerative medicine. The most used source of those stem cells long the last decades was the bone marrow, despite its limited cell resources and the painful and very invasive surgical treatment. Therefore, the scientific community investigated many alternative sources for the harvesting of these stem cell subpopulations. Adipose tissue attracted the biggest interest thanks to special features, such as great tissue abundance, easy availability, and in the end the large amount of positive mesenchymal stem cells. Once it was verified that these stem cell subpopulations possess the same bone marrow differentiation potential, it became evident that they would be the ideal candidate to be used in regenerative and tissue engineering applications. Even the regenerative use of these cells long become a sensitive point because not all the acquired phenotypes resulted in the best source for plastic procedures. As documented in the literature, the ideal fillers for regenerative is represented by stem cell population. Therefore, it became crucial to investigate any kind of biological mechanism on the differentiative ability of those mesenchymal stem cells, especially their regulative factors. One of the most studied and important regulators are the miRNAs. Indeed, miRNA play a crucial role in the differentiation process of adipose stem cell cultures isolated from patients or obtained by commercial cell lines toward osteocytes, chondrocytes, and adipocytes differentiated populations.

Given the increased provision of international exchange programmes in higher education, this paper examines students’ perceptions of their learning process in one Erasmus+ programme in Food Innovation and Product Design. Using evaluation model of international exchange programme and triple helix model as the analytical framework, students’ testimonials from 2015–2021 were analysed using a critical discourse analysis. EU and non-EU students had similar perceptions of learning outcomes related to knowledge of the food innovation industry, but non-EU students had a stronger sense of awareness of both the international context and multicultural interaction.

In this report we describe the case of a healthy, young, athletic woman who developed acute lymphoblastic leukaemia (ALL)/lymphoblastic lymphoma (LBL) after receiving the second dose of the Pfizer/BioNTech modified mRNA (modRNA) COVID-19 genetic vaccine (marketed as Comirnaty^®). The first dose of the genetic vaccine did not appear to illicit any noticeable side effects, but within 24 hours of the second dose the patient suffered widespread and intensifying bone pain, fever, vomiting, and general malaise. Due to the persistence of the symptoms, the patient underwent a series of tests and examinations including a full laboratory workup, a consult with a clinical immunologist and rheumatologist, a Positron Emission Tomography (PET) imaging, as well as an osteomedullary biopsy. These together led to a definitive diagnosis of ALL. A time interval of 16 weeks from the second vaccination to the diagnosis of cancer was noted. Several similar cases with identical pathology which developed after the modRNA COVID-19 vaccination, are described in case reports in the scientific literature. The massive and indiscriminate use of genetic vaccines to fight COVID-19 is raising serious concerns about their safety and about the technology platform as a whole for this purpose. Growing evidence is accumulating regarding the biodistribution and persistence of the modRNA which can reach, thanks to the lipid nanoparticles, a multitude of tissues and organs of the body, including the bone marrow and other blood-forming organs and tissues. Moreover, there is evidence that the modRNA vaccines display a particular tropism for the bone marrow, influencing the immune system at multiple levels and being able to trigger not only autoimmune-based pathologies, but also neoplastic mechanisms. The aim of this article is to assess, on the basis of the available scientific literature, the risk of developing haematopoietic cancers after modRNA vaccination, and to investigate the potential genetic mechanisms involved in the pathogenesis of disease.

Efficient triaging and referral assessment are critical in ensuring prompt medical intervention in the Community Health Care (CHC) system. However, the existing triaging systems in many Community Health Services are an intensive, time-consuming process and often lack accuracy, particularly for various symptoms that might represent heart failure or other health-threatening conditions. There is a noticeable limit of research papers describing AI technologies for triaging patients. This paper proposes a novel quantitative data-driven approach using machine learning (ML) modelling to improve the community clinical triaging process. Furthermore, this study aims to employ the feature selection process and machine learning power to reduce the triaging process’s waiting time and increase accuracy in clinical decision-making. The model was trained on medical records of “Heart Failure” patients’ dataset, which included demographics, past medical history, vital signs, medications, and clinical symptoms. A comparative study was conducted using the list of machine learning algorithms where XGBoost demonstrated the best performance among other ML models. The triage levels of 2,35,982 patients achieved an accuracy of 99.94%, precision of 0.9986, recall of 0.9958, and f1-score of 0.9972 within 0.059 seconds. The proposed diagnostic model can be implemented for the CHC decision system and be developed further for other medical conditions.

Organ-on-a-chip (OOC) is an emerging technology that simulates an artificial organ within a microfluidic cell culture chip. Current cell biology research focuses on in vitro cell culture due to various limitations of in vivo testing. Unfortunately, in vitro cell culture fails to provide an accurate microenvironment, and in vivo cell culture is expensive and has historically been a source of ethical controversy. OOC aims to overcome these shortcomings and provide the best of both in vivo and in vitro cell culture research. The key component of the OOC design is utilizing microfluidics to ensure a stable concentration gradient, dynamic mechanical stress modeling, and accurate reconstruction of a cellular microenvironment. OOC also has the advantage of complete observation and control of the system, which is impossible to recreate in in vivo research. Multiple throughputs, channels, membranes, and chambers are constructed in a polydimethylsiloxane (PDMS) array to simulate various organs on a chip. Various experiments can be performed utilizing OOC technology, including drug delivery research and toxicology. Current technological expansions involve multiple organ microenvironments on a single chip, allowing for studying inter-tissue interactions. Other developments in the OOC technology include finding a more suitable material as a replacement for PDMS and minimizing artefactual error and non-translatable differences.

This study delves into the realm of potential therapeutics for breast cancer by conducting a comprehensive docking simulation and virtual screening analysis using Autodock Vina Algorithm. The focus based on the human epidermal growth factor receptor 2 (HER2), a key protein associated with various cancers, particularly in the context of breast cancer.The results reveal compelling insights into the binding interactions of several natural compounds and drugs with HER2. Notably, Acebilustat, Bemcentinib, and Amentoflavone exhibit outstanding binding energies, averaging around -10 kcal/mol, suggesting strong and favorable interactions with the HER2 target.These encouraging findings not only emphasize the potential biological significance of these compounds but also hint at their potential usefulness in fighting breast cancer.Their promising binding affinities with HER2 position them as potential candidates for further investigation and development as therapeutic agents against breast cancer.

This study investigates the potential antimicrobial utility of the natural substance Amentoflavone against four dangerous bacterial strains—Mycobacterium tuberculosis, Helicobacter pylori, Haemophilus influenzae, and Pseudomonas aeruginosa. Utilizing molecular docking studies, are assessed the binding interactions between Amentoflavone and key protein targets crucial for the viability of these bacteria. The findings suggest promising binding affinities, particularly in the active sites of Aminoglycoside 2'-N-acetyltransferase, Thioredoxin Reductase, N-acetylneuraminate Lyase, and Glucose-1-phosphate Thymidylyltransferase in the respective bacterial strains. While these in silico results provide initial insights, further in vitro and in vivo experiments are essential to validate the biological relevance and efficacy of Amentoflavone as a potential antimicrobial agent against these bacterial pathogens.

Physical exercise is the greatest stress on the cardiovascular system, not only in humans but also in all vertebrates. Consequently, the cardiovascular response cannot be thought of as having only one "anthropocentric" interpretation. The modulation of cardiac output (Q) in response to exercise in the five major groups of vertebrates exhibits considerable variability. Moreover, the response of the heart rate (HR) and the stroke volume (SV), the fundamental factors that cause the rise in Q, is also highly variable. The difference in the range of HR is difficult to determine in many vertebrates, both at rest and at maximal effort. Additionally, the increase in SV varies among vertebrates. For example, while rainbow trout and leopards increase their SV by increasing end diastolic volume (EDV), humans do so at the expense of both increasing EDV and reducing end systolic volume (ESV). The variation in arterial pressure that arises during exercise varies notably among vertebrates, such as amphibians, whose blood pressure values do not increase as significantly as in mammals. Such differences in cardiovascular response among vertebrates may be linked to their habitat or living environment. This review aims to analyze the cardiovascular response of vertebrates to physical exercise as the most common stressor.

Resistance to therapy and disease progression are the main causes of mortality in most cancers. In particular, the development of resistance is an important limitation affecting the efficacy of therapeutic alternatives for cancer, including chemotherapy, radiotherapy, and immunotherapy. Signaling pathways are largely responsible for the mechanisms of resistance to cancer treatment and progression, and multiple myeloma is no exception. p38 mitogen-activated protein kinase (p38) is downstream of several signaling pathways specific to treatment resistance and progression. Therefore, in recent years, developing therapeutic alternatives directed at p38 MAPK has been of great interest, in order to reverse chemotherapy resistance and prevent progression. In this review, we discuss recent findings on the role of p38, including recent advances in our understanding of its expression and activity as well as its isoforms, and its possible clinical role based on the mechanisms of resistance and progression in multiple myeloma.

This paper explores the interactions of dynamic dark energy with other components of the cosmos, such as dark matter and baryonic matter, and its wide-ranging implications in cosmology. By investigating the interplay between dynamic dark energy and the universe's large-scale structure, we aim to provide a deeper understanding of cosmic evolution and the behavior of dark energy in different cosmological epochs. We also examine the potential of dynamic dark energy to offer novel insights into long-standing cosmological puzzles and their impact on the formation and evolution of cosmic structures.

Chinese calligraphy, revered globally for its therapeutic and mindfulness benefits, encompasses styles such as Regular (Kai Shu), Running (Xing Shu), Official (Li Shu), and Cursive (Cao Shu) scripts. Beginners often start with Regular script, advancing to more intricate styles like Cursive. Each style, marked by unique historical calligraphers' contributions, requires learners to discern distinct nuances. The integration of AI in calligraphy analysis, collection, recognition, and classification are pivotal. This study introduces an innovative Convolutional Neural Network (CNN) architecture, pioneering the application of CNN in the classification of Chinese calligraphy. Focusing on the four principal calligraphers' styles from the Tang dynasty (690-907 A.D), this research spotlights the era when the traditional regular script font (Kai Shu) was refined. A comprehensive dataset of 8282 samples from these calligraphers, representing the zenith of regular style, was compiled for CNN training and testing. The model distinguishes personal styles for classification, showing superior performance over existing networks. Achieving 89.5-96.2% accuracy in calligraphy classification, our approach underscores the significance of CNN in both font and artistic style categorization. This research paves the way for advanced studies in Chinese calligraphy and its cultural implications.

Chronological frameworks based on artefact typologies are essential for interpreting the archaeological record, but they inadvertently treat transitions between phases as abrupt events and disregard the temporality of transformation processes within and between individual phases. This study presents an absolute chronological investigation of a dynamic material culture from Early Iron Age urnfields in Denmark. The chronological framework of Early Iron Age in Southern Scandinavia is largely unconstrained by absolute dating, primarily due to it coinciding with the so-called ‘Hallstatt calibration plateau’ (c.750 to 400 cal BC), and it is difficult to correlate it with Central European chronologies due to a lack of imported artefacts. This study applies recent methodological advances in radiocarbon dating and Bayesian chronological modelling, specifically a statistical model for wood-age offsets in cremated bone and presents the first large-scale radiocarbon investigation of regional material culture from Early Iron Age in Southern Jutland, Denmark. Dated material is primarily cremated bone from 111 cremation burials from three urnfields. The study presents absolute date ranges for 16 types of pottery and 15 types of metalwork, which include most of the recognised metalwork types from the period. This provides new insights into gradual change in material culture, when certain artefact types were in production and primary use, how quickly types were taken up and later abandoned, and distinguishing periods of faster and slower change. The study also provides the first absolute chronology for the period, enabling correlation with chronologies from other regions. Urnfields were introduced at the Bronze-Iron Age transformation, which is often assumed to have occurred c.530-500 BC. We demonstrate that this transformation took place in the 7^th century BC, however, which revives the discussion of whether the final Bronze Age period VI should be interpreted as a transitional phase to the Iron Age.

Docosahexaenoic acid (DHA) is an essential fatty acid (FA) with proven health effects, whom bioavailability improvement is becoming a public health issue. Unlike fish oils, the bioavailability of DHA from microalgal (A) has not been fully assessed, particularly with regard to the molecular structuring capabilities offered by A-oil. We explored the impact of 5 formulas rich in DHA, different by i) the molecular structure: ethyl ester (EE) or monoglyceride (MG) or Triglyceride (TG) and ii) the supramolecular form: emulsified TG or TG+phospholipids (blend PL), on the lymphatic kinetics of DHA absorption and the lipid characteristics of resulting lipoproteins. We demonstrated that in rat, the DHA absorption of the conventional A-DHA TG structure was more effective than the EE structure (+ 23%). More, the A-DHA MG and A-DHA Emulsion were the most favourable DHA-vectors (AUC: 89% and +42%, respectively), thanks to an improved lipolysis. The A-DHA MG and -Emulsion presented the richest DHA content in TG (+40%) and PL (+50%) of lymphatic chylomicrons, which could impact the metabolic fate of DHA. We concluded that structuring A-DHA in TG or EE would be more prone for tissue and hepatic metabolism whereas in A-DHA MG and A-DHA Emulsion could target nerve tissues.

The microalgae Phaeodactylum tricornutum (PT) is distinguished by its rich nutrient profile, characterized by well-documented neuroprotective activities, including fucoxanthin (FX), a major carotenoid, and polyunsaturated omega-3 fatty acids (n-3 PUFA). The current study aims to evaluate the protective effects of a standardized extract of PT (Mi136) containing 2% FX on cognitive function, oxidative stress, and inflammation parameters in a mouse model of accelerated aging. Seventy-two (72) male mice were randomly assigned to the blank control group (BC), negative control group (NC), and four similar microalgae extract of PT groups (branded as BrainPhytTM) with different human equivalent doses. From day 01 to day 51, mice in the BC group were injected with a 0.9% normal saline solution, while mice in all other groups were subcutaneously injected with D-galactose (D-Gal) at a dose of 150 mg/kg once per day, five days per week. Results indicated that, for the three higher microalgae extract of PT dose groups, spatial cognitive function, swim latency, and step-through latency impairments induced by chronic D-Gal intoxication were significantly and fully inhibited, with mean values similar to those in the BC group during each day of testing. Similar benefits were observed in biochemical analysis, specifically regarding brain and plasma levels of lipid peroxidation, TNF-α, and IL-6 markers. These data underscore the positive effects of a standardized extract of PT containing 2% FX on cognitive function parameters such as spatial working memory, long-term memory, and short-term memory through the regulation of oxidative stress and inflammation pathways.

The reflection and transmission spectra of a metamaterial formed by omega-shaped elements with pre-calculated optimal parameters on a silicon substrate have been recorded in the terahertz range at oblique incidence for the s- and p- polarizations of the incident wave. The spectra were interpreted within the dipole radiation theory of electromagnetic waves. Both measurement results and analysis provide evidence sup-porting the presence of a pronounced polarization anisotropy impact in the reflection and transmission of the metamaterial. The potential of these materials to be utilized in the development of devices that control the polarization properties of THz radiation across a wide spectral range is examined.

The co-occurrence of depression and obesity has become a significant public health concern worldwide. Recent studies have shown that metabolic dysfunction, which is commonly observed in obese individuals and characterized by inflammation, insulin resistance, leptin resistance, and hypertension, is a critical risk factor for depression. This dysfunction may induce structural and functional changes in the brain, ultimately contributing to depression's development. Given that obesity and depression mutually increase each other's risk of development by 50-60%, there is a need for effective interventions that address both conditions. The comorbidity of depression with obesity and metabolic dysregulation is thought to be related to chronic low-grade inflammation, characterized by increased circulating levels of pro-inflammatory cytokines, and C-reactive protein (CRP). As pharmacotherapy fails in at least 30-40% of cases to adequately treat major depressive disorder, a nutritional approach is emerging as a promising alternative. Omega-3 polyunsaturated fatty acids (n-3 PUFAs) are a promising dietary intervention that can reduce inflammatory biomarkers, particularly in patients with high levels of inflammation, including pregnant women with gestational diabetes, patients with type 2 diabetes mellitus, and overweight individuals with major depressive disorder. Further effort directed to implement these strategies in clinical practice could contribute to improved outcomes in patients with depression and comorbid obesity and/or metabolic dysregulation.

Amphetamine is a psychostimulant drug with a high risk of toxicity and death when misused. Abuse of amphetamines is associated with an altered organic profile, which includes omega fatty acids. Low omega fatty acid levels are linked to mental disorders. Using the Comparative Toxicogenomic Database (CTD), we investigated the chemical profile of the brain in amphetamine-related fatalities and the possibility of neurotoxicity. We classified amphetamine cases as low (0-0.5 g/ml), medium (&gt;0.5 to 1.5 g/ml), and high (&gt;1.5 g/ml) based on amphetamine levels in brain samples. All three groups shared 1-octadecene, 1-tridecene, 2,4-di-tert-butylphenol, arachidonic acid, docosahexaenoic acid (DHA), eicosane, and oleylamide. We identified chemical-disease associations using the CTD tools and predict an association between docosahexaenoic and arachidonic acids and curated conditions like autistic disorder, disorders related to cocaine, Alzheimer's disease, and cognitive dysfunction. An amphetamine challenge may cause neurotoxicity in the human brain due to a decrease in omega-3 fatty acids and an increase in oxidative products. Therefore, in cases of amphetamine toxicity, supplement therapy may necessitate preventing omega-3 fatty acid deficiency.

Wheat has to face the effects of global warming standing on the thread worldwide, and competing with many crops in the Rabi season (15 Oct to 15 Mar). Wheat is Bangladesh’s second staple, meeting 13.6% of the country's cereal demand. However, despite an annual demand of 7.5 million metric tons (MMT), domestic wheat production in the 2023-24 season was only 1.19 MMT, covering just 15.9% of its demand and necessitating imports costing $2.21 billion. Demand continues to rise by 7-13% each year. Wheat production has declined from 1.99 in the 1998-99 season to 1.19 MMT in the 2023-24 season due to high crop competition with Boro rice, maize, mustard, and other crops during the Rabi season. Wheat production is reduced by other factors, such as low prices and insufficient mechanization, lack of time decision, etc. to purchase wheat grains by the government and businessmen which discourage framers from its cultivation. Expanding wheat cultivation with high-yielding stress-tolerant varieties in fallow lands and non-traditional areas would reduce greenhouse gas (GHG) emissions, malnutrition, groundwater harvesting, etc. Our study aims to offer new insights to policymakers and national and international benevolent agencies regarding the reasons behind the decline in wheat production and potential strategies to increase it. Additionally, this content will provide guidelines for policymakers and other stakeholders on how to reduce severe malnutrition and minimize greenhouse gas emissions and groundwater harvesting, thereby supporting the implementation of the United Nations' Sustainable Development Goals (SDGs).

The growing antibiotic resistance of microorganisms causing postoperative infections following orthopedic surgeries underscores the urgent need for localized antiseptic and lavage delivery systems to enhance infection control. This study evaluates the in vitro effectiveness of antiseptic and lavage solutions—including polyhexanide, povidone-iodine, low-concentration hypochlorite, Ringer’s solution, and saline—against Staphylococcus epidermidis, Staphylococcus aureus MRSA, Cutibacterium acnes, Corynebacterium amycolatum, Pseudomonas aeruginosa, and Candida albicans. Using microplate models (Minimum Inhibitory Concentration, Minimum Biofilm Eradication Concentration, and Biofilm-Oriented Antiseptic Test assays), flow-based models (Bioflux system), and surfaces relevant to orthopedic implants (e.g., stainless steel disks/screws, Co-Cr-Mo, Ti-Al-Nb orthopedic alloys, and ultra-high molecular weight polyethylene), as well as a bio-nano-cellulose scaffold representing tissue, we assessed solutions activity. The cytotoxicity of the solutions was evaluated using osteoblast and keratinocyte cell lines, with additional in vivo insights gained through the Galleria mellonella larval model. Results show that polyhexanide-based solutions outperformed povidone-iodine in biofilm eradication in most tests applied, particularly on complex surfaces, whereas iodine demonstrated higher cytotoxicity in applied in vitro and in vivo tests. Low-concentration hypochlorite solutions exhibited minimal antibiofilm activity but also showed no cytotoxicity in cell line and G. mellonella larval models. These findings highlight the importance of careful antiseptic selection and rinsing protocols to balance infection control efficacy with tissue compatibility in orthopedic applications.