The most recent National Research Council Nutrient Requirements for Sheep and Goats was published in 2007, one of the most consequential nutrient requirement recommendations for sheep and goats in the world. It is pertinent to continue the refinement and discussion of nutrient utilization and requirements for the purposes of enhancing the efficiency of production systems, maximizing resource economy, and minimizing the carbon footprint, among others. Progress has been made in the estimation of energy and protein requirements in sheep and goats, mainly utilizing empirical feeding experimentation, comparative slaughter technique and minimum endogenous loss method. In sheep, newer estimates of energy and protein requirements for maintenance and growth and partial efficiencies had been reported since 2007. There were suggestions that energy and protein requirements could have been affected by breed, wool growth, gender and size; with these reported values being similar or lower than the recommended values in international feeding systems such as NRC, ARC, INRA and AFRC. In goats, energy and protein requirements for growing goats were reported to be either higher or lower than the established recommendations, depending upon meat or dairy breeds. Effect of gender on energy requirement appeared to be related to the stage of growth or degree of maturity. Newer data also suggested that the guidelines of the major feeding systems for the entire growth phase may not be adequate for non-pregnant and non-lactating pubertal females. In multiparous pregnant goats, energy and protein requirements for maintenance did not appear to be affected by days of pregnancy, but efficiencies of metabolizable energy and metabolizable protein utilization for pregnancy were. There were suggestions that that metabolizable protein synthesis in the rumen can be predicted from energy intake using combined equations that encompass both sheep and goats, but more data on goats were called for to account for specific differences in nutrition. In addition to sulfur, there has been progress made on the estimation of maintenance and growth requirements of calcium, phosphorus, potassium and magnesium in goats, with suggestions on the consideration of gender and breed differences. Species, level of Intake, genotype, mature size, age, gender, body composition, use of tissue energy, activity, season, and acclimatization continue to be important considerations for the estimation of nutrient requirements in sheep and goats, with emerging factors such as climate change, heat stress, parasitism and secondary plant compounds. Model equations and partial efficiencies used by NRC to predict energy and protein requirements for maintenance, growth, lactation, and fiber have been highlighted and discussed for the purpose of a more focus discussion and refinement for the future. Potential and limitation of both traditional and emerging methodologies in determining the nutrient requirements in sheep and goats were discussed. To justify the research investment, emerging methodologies such as nutrigenomics will have to be linked more directly to the improvement of production efficiency via more precise prediction of nutrient requirement.

Entanglement is one of the most striking features in quantum systems. Today, quantum entanglement plays a vital role in quantum technology, the non-classical correlation of quantum entanglement is an important resource for quantum communication and quantum computing. Entanglement can be divided into two categories: between multi-particle systems and between various degrees of freedom in a single-particle system (intraparticle entangled states). This work first analogized the distinctions and connections between two kinds of entangled states. Then it designed three types of entanglement-swapping methods based on Bell state joint measurement, cross-Kerr medium, and linear optical elements for intraparticle entangled states by analogizing the entanglement swapping between multiple particles. Intraparticle entanglement swapping can be applied in super quantum dense encoding, quantum information transmission, and quantum teleportation. This work is beneficial for promoting the development of quantum information technologies.

In this paper we present a city-scale (possibly global) air pollution network made of low-cost sensors for particulate matter concentration in the air. The components of presented system are based on our research and experience from previous studies focused on air quality instruments and sensors for addressing urban air pollution. Sensor nodes are produced locally and distributed over a city of Sarajevo, Bosnia and Herzegovina. The system collects, calibrates and displays particulate metal concentrations in real-time. In comparison to the available measurements from governmental institutions, our system demonstrated good agreement of measured parameters, with several advantages including: higher resolution in space and time, lower costs, both horizontal and vertical measurements and many more. One of the capabilities of the system is the real-time air pollution city map with animations. By installing multiple sensor nodes over a slope (cable car), we receive vertical measurements of temperature, humidity and particulate matter concentration in real time, which gives a valuable insight into the dynamics of temperature inversion episodes and air pollution below the inversion layer.

Ten new Schiff bases, including thiocarbohydrazone derivatives (1–10), were synthesized using an efficient, uncomplicated, and environmentally friendly approach using the reaction of alkyl-substituted aldehydes. The thiocarbohydrazones that were obtained were derived from o-phthalaldehyde. The chemical structures of the compounds were identified by the utilization of UV-Vis spectroscopy, Fourier transform infrared (FT-IR), ¹H nuclear magnetic resonance (¹H NMR), ¹³C nuclear magnetic resonance (¹³C NMR), and elemental analysis methods. The thermal stability of thiocarbohydrazones was examined using thermogravimetric analysis (TGA-DSC). Investigations were conducted on urease inhibition tests, pharmacokinetic property research, and molecular docking. The collection of samples with the urease enzyme revealed significant molecular docking findings, with MolDock scores ranging from -153 to -189. The compounds have the potential to be effective drug candidates for treating certain diseases, as indicated by the consistent results of molecular docking, urease inhibition tests, and pharmacokinetic characteristics investigations.

Creating accurate emission models capable of capturing the variability and dynamics of modern propulsion systems is crucial for future mobility planning. This paper presents a methodology for creating THC and NOx emission models for vehicles equipped with start-stop technology. A key aspect of this endeavor is to find techniques that accurately replicate the engine stop stages when there are no emissions. To this end, several machine learning techniques were tested using the Python programming language. Random forest and gradient boosting methods demonstrated the best predictive capabilities for THC and NOx emissions, achieving R2 scores of approximately 0.9 for both cold and hot engine emissions. Additionally, recommendations for effective modeling of such emissions from vehicles are presented in the paper.

This study aimed to investigate the efficacy of manual therapy and exercise versus synchronized telerehabilitation with self-manual therapy and exercise in treating Subacromial Pain Syndrome (SAPS). Sixty individuals diagnosed with SPS, aged 18-50 years, were randomly assigned to home exercise (HE), manual therapy (MT), and telerehabilitation (TR) groups. Treatment protocols were administered over 8 weeks and included specific exercises and therapy interventions. Out-come measures included Visual Pain Scale (VAS), shoulder range of motion (ROM) via gonio-metric measurements, Quick Disability Arm-Shoulder-Hand Problems Survey (Q-DASH), and patient satisfaction. Results revealed that both MT and TR groups exhibited reduced pain, in-creased ROM, lower Q-DASH scores, and higher patient satisfaction compared to the HE group. However, no significant differences were found between MT and TR groups in pain levels, ROM, Q-DASH scores, or patient satisfaction. The study concludes that both telerehabilitation and manual therapy effectively alleviate pain and are well-received by patients with SPS. Addition-ally, manual therapy demonstrates superiority in enhancing functional levels compared to exer-cise-based interventions. (Registration: NCT05200130)

Cars are a highly inefficient mode of urban transport with significant negative impacts. Electric vehicles make it possible to eliminate direct CO2 emissions (though the total over a vehicle’s entire life cycle greatly offsets the advantages) but leave unchanged – or even aggravate – all the other negative effects on the quality of urban environments. Three visions for urban transport were presented: automobility, multimodality and accessibility. The first dominates North American cities, the second European one. The anomalies of these two visions have been examined. The automobility cities cannot manage the congestion and the attempts are self- defeating. The anomalies of multimodality city are related to the public space consumption for mobility and the impossibility to plan spatial proximity. The sustainable vision, that resolve the anomalies, is represented by the accessibility city in the Triple Access System (TAS) version which, however, still has a long way to go to be accepted and implemented.

The review explores the therapeutic potential of mangrove plants as sources of bioactive compounds, particularly focusing on their anti-inflammatory properties. Mangroves, found in tropical and sub-tropical tidal coasts, exhibit unique ecological and biological activities. The review compiles and examines 136 research findings published between 1982 and 2018, with 41 studies specifically addressing the anti-inflammatory properties of mangroves in Indian coastal regions, including the Andaman and Nicobar Islands. It summarizes the chemical structures, molecular weights, formulas, solvents, and biological activities of these mangroves, as reported by various researchers over time. The data underscore the significant potential of tropical Indian mangroves in anti-inflammatory applications. However, a notable research gap exists regarding the extraction of bioactive compounds from mangrove species in the Andaman and Nicobar Islands compared to other regions such as Gujarat, Maharashtra, Goa, Karnataka, Kerala, Tamil Nadu, Andhra Pradesh, Odisha, West Bengal, and Puducherry. Overall, the compilation provides valuable insights into mangrove-based studies for drug discovery research, emphasizing the need for further exploration and exploitation of these natural resources.

Use of MS Excel as a platform for teaching simple iterative solution of partial differential equations runs into issues of reliability of the computation because of the large number of calculations required. This article documents the problem and an empirical solution. The cause of this unreliability was found by detailed examination of the numerical results from three simultaneous iterations. Computers of several types from different manufacturers were found to fail occasionally in updating variables in the numerical iteration. A simple work-around is suggested and was tested on several platforms.

Semi-continuous data are very common in the social science and economics. In this paper, a Bayesian variable selection procedure is developed to assess the influence of exogenous factors including observed and unobserved on the semi-continuous data. Our formulation is based on the two-part latent variable model with polytomous response. We consider two schemes for the penalties of regression coefficients and factor loadings: the Bayesian spike and slab bimodal prior and the Bayesian lasso prior. Within the Bayesian framework, we implement Markov Chains Monte Carlo sampling method to conduct posterior inference. To facilitate posterior sampling, we recast the logistic model in part one as the norm-like mixture model. Gibbs sampler is designed to draw observations from the posterior. Our empirical results show that with suitable hyper-parameters, the spike and slab bimodal method slightly outperforms the Bayesian lasso in the current analysis. Finally, a real example related to the China household finance survey is analyzed to illustrate the application of the methodology.. .

The teaching and learning environment have changed significantly over the last decade with the integration of an increasing amount of information and communication technologies, especially in distance education due to global pandemics, total lockdowns, isolation, and quarantine periods. The number of numerous virtual and non-virtual tools involved in educational processes is growing day by day. In terms of technological innovations used in learning environments, many researchers and educators are trying their best to bring more creative ideas into the technology- based learning environments. Although higher educational institutions have greatly benefited from the growing number of hardware and software resources in the educational process, they have also faced some setbacks that have harmed the learning processes. These technologies have in turn complicated some of the processes in the learning atmosphere. Therefore, we take Spanish teaching course as an example to present the challenging smarter teaching and learning systems that higher educational institutions face today.

This paper proposes two max-pooling engines, named the RTB-MAXP engine and the CMB-MAXP engine, with a scalable window size parameter for FPGA-based convolutional neural network (CNN) implementation. The max-pooling operation for the CNN can be decomposed into two stages, i.e., a horizontal axis max-pooling operation and a vertical axis max-pooling operation. These two one-dimensional max-pooling operations are performed by tracking the rank of the values within the window in the RTB-MAXP engine and cascading the maximum operations of the values in CMB-MAXP engine. Both the RBM-MAXP engine and the CMB-MAXP engine were implemented using VHSIC Hardware Description Language (VHDL) and verified by simulations. They have been employed for and tested in our CNN accelerator targeting at the CNN model YOLOv4-CSP-S-Leaky for object detection.

Sesamum indicum is considered an underutilized oil-bearing seed in the semi-arid regions of Ghana. Nonetheless, it is a promising source of food with both nutritional and therapeutic benefits. The aim of the present study was to evaluate the antioxidant properties S. indicum seeds using different extraction solvents. The seeds were obtained from the local farmers and prepared for analysis. The bioactive compounds present in the seeds were extracted using hexane, ethyl acetate, ethanol and water and their yields quantified. Total phenolic content (TPC), Condensed tannin content (TTC) and Total antioxidant capacity (TAC) , and DPPH radical scaveging assay were analyzed using standard methods. Antinutrients such as saponins, alkaloids, phytates and oxalates were also analyzed from the powdered seeds. Two chemometric methods; hierarchical cluster analysis (HCA) and Pearson correlation were employed to evaluate the interdependence of the various parameters to result in their antioxidant properties. The re-sults revealed that the solvents utilized had a significant impact on the extraction yield, phyto-chemical component concentration, and antioxidant activities. Hexane extracts of S. indicum seeds significantly exhibited the highest antioxidant activity (p < 0.05). It was marked with the highest TAC value of 232.6 ± 6.267 mg/g AAE and a strong DPPH scavenging activity with an IC50 of 52.81 ± 2.30 µg/mL. Correlations (p < 0.05) was established between TPC,CTC, TAC and DPPH radical scavenging activity) of the extracts. Antinutrients such as; phytate, oxalate, saponins and alkaloids were found to be 7.691 ± 0.8576, 1.501 ± 0.1375, 21.33 ± 4.619 and 317.33 ± 30.29 mg/g respectively. Data obtained suggest that S. indicum possess rich bioactive compounds that can be used in neutraceuticals and food products.

Depressive disorder in childhood and adolescence is a highly prevalent mood disorder that tends to recur throughout life. Untreated mood disorders can adversely impact a patient's quality of life and cause socioeconomic loss. Thus, an accurate diagnosis and appropriate treatment is crucial. However, until now, diagnoses and treatments are conducted according to clinical symptoms. Objective and biological validation are lacking. This may result in a poor outcome for patients with depressive disorder. Research has been conducted to identify the biomarkers that are related to depressive disorder. Cumulative evidence has revealed that certain immunologic biomarkers in-cluding brain-derived neurotrophic factor (BDNF) and cytokines, gastrointestinal biomarkers, hormones, oxidative stress, and certain hypothalamus-pituitary axis biomarkers are associated with depressive disorder. This article reviews the biomarkers related to the diagnosis and treatment of pediatric depressive disorders. To date, clinical biomarker tests are not yet available for diagnosis or for the prediction of treatment prognosis. However, cytokines such as Interleukin-2, interfer-on-gamma, tumor necrosis factor-alpha, and BDNF have shown significant results in previous studies of pediatric depressive disorder. These biomarkers have the potential to be used for diagnosis, prognostic assessment, and group screening for those at high risk.

Expansion tube is ideal energy absorber which dissipates kinetic energy through plastic deformation and friction. There is an urgent need to understand the influence of key parameter, e.g. semi angle, tube material, and friction coefficient, on the mechanical response and energy absorption characteristics of expansion tube. In the present work, the material properties of the tubes were tested under quasi-static loading condition, and the numerical simulations were carried out by using commercial software ABAQUS. Based on the validated finite element simulation, all the semi angle, tube material, and friction have significant effects on the energy absorption capacity of expansion tube. The expansion tube with high tensile stress of parent material have high energy absorption capacity, while the specific energy absorption is linear with the tensile stress/density of tube material. This work would give a guidance to the structural design and parent materials selection for expansion tubes.

Euler’s product formula over the primes and Euler’s zeta function equate to enshrine the Fundamental Theorem of Arithmetic that every integer > 1 is the product of a unique set of primes. The product formula has no zero, and with a domain ≤1 Euler’s zeta diverges. Dirichlet’s eta function η(s), negates alternate terms of zeta, permitting convergence when s∈C and Re(s) < 1, and its non-trivial zeros {ρ}, have a deep relationship with the distribution of the primes. The Riemann Hypothesis is that all the non-trivial zeros have Re(ρ) = 1/2. This work examines the symmetries in a partial Euler’s zeta series with a complex domain equating it to the difference between two finite vector series whose matched terms have mirror-image arguments, but whose magnitudes differ when Re(s) ≠ 1/2. Analytical continuation generates a modified eta series η_l(s), in which every l^th term is multiplied by (1-l). If the integer l is appropriately determined by the Im(s), similar paired finite vector series have a difference that closely follows η_l (s) and their terminal vectors intersect in a unique way permitting zeros only when Re(s) = 1/2. Furthermore, those vectors tracking the derivatives of the series, have a special relationship permitting zeros of the differential only when Re(s) > 1/2.

BackgroundIt is unclear what underpins the large global variations in the prevalence of fluoroquinolone resistance in gram-negative bacteria. We tested the hypothesis that different intensities in the use of quinolones for food-animals plays a role. MethodsWe used Spearman’s correlation to assess if the country-level prevalence of fluoroquinolone resistance in human infections with Acinetobacter baumannii, Escherichia coli, Klebsiella pneumoniae and Pseudomonas aeruginosa was correlated with the use of quinolones for food producing animals. Linear regression was used to assess the relative contributions of country-level quinolone consumption for food-animals and humans on fluoroquinolone resistance in these 4 species. ResultsThe prevalence of fluoroquinolone resistance in each species was positively associated with quinolone use for food-producing animals (E. coli [ρ=0.55; P<0.001], K. pneumoniae [ρ=0.58; P<0.001]; A. baumanii [ρ=0.54; P=0.004]; P. aeruginosa [ρ=0.48; P=0.008]). Linear regression revealed that both quinolone consumption in humans and food animals were independently associated with fluoroquinolone resistance in E. coli and A. baumanii. ConclusionsReducing quinolone use in food-producing animals may help retard the spread of fluoroquinolone resistance in various gram negative bacterial species.

Background: Two explored EDA1 variants regulate the biological behaviors of human dental pulp stem cells (hDPSCs), such as proliferation and migration, as well as their effects on odontogenic differentiation, providing a theoretical basis for further exploration of the mechanisms underlying EDA1-induced tooth development. Methods: The experimental groups included a wild-type EDA1 group (Wt), non-syndromic tooth agenesis variants EDA1 group (NSTA-A259E, NSTA-S374R), syndrome type variant EDA1 group (STA-H252L), and an empty vector control group (PCR3/NC). CCK-8 method was used to investigate the proliferative activity of hDPSCs. The cell cycle distribution of hDPSCs was detected by flow cytometry; The cell migration ability was assessed using the cell scratch and Transwell tests; Odontogenic differentiation medium was used to induce mineralization of hDPSCs, followed by statistical analysis. RNA-Seq revealed that FOS, JUN and other genes were found to be enriched in MAPK signaling pathway and osteoclast differentiation pathway. qPCR was used to detect mRNA expression of hub genes (FOS and JUN). Results: Compared with the NSTA-EDA1 and STA-EDA1, Wt-EDA1 promotes the proliferation and transformation of hDPSCs from the G0/G1 phase to S phase (p<0.01), with no significant difference between NSTA-EDA1 and STA-EDA1 (p>0.05). Wt-EDA1 also upregulated hDPSCs cell migration compared to NSTA-EDA1 and STA-EDA variants, as demonstrated by migration assays (p<0.01). NSTA-EDA1 and STA-EDA1 variants inhibited the odontogenic differentiation of hDPSCs compared to the Wt group, as shown by Alizarin red staining and ALP staining (p<0.01). RNA sequencing revealed that the differentially expressed genes FOS and JUN were enriched in the MAPK signaling pathway and osteoclast differentiation. Compared with Wt-EDA1, EDA1 variants lost the ability to promote c-FOS mRNA expression, as confirmed by qPCR. Conclusions: EDA1 variants fail to the promote c-FOS mRNA expression in hDPSCs, thereby inhibiting odontogenic differentiation and losing the ability to enhance the proliferation of hDPSCs.

Introduction: The COVID-19 pandemic challenged people with spinal cord injury (SCI) regarding a variety of mental and physical issues. New challenges may arise as the effects of the pandemic continue. The objective of the present study was to explore the social participation of Canadians with SCI during the second wave of COVID-19. Methods: Participants with SCI from two Canadian provinces (Quebec and British Columbia) were interviewed. Results: Eighteen participants completed interviews. Facilitators of social participation remain similar since the first wave of COVID-19, such as the use of technology, help received by relatives and the use of delivery services to obtain groceries and other essentials. Obstacles to mobility due to winter conditions and lack of considerations related to COVID-19 public health measures specific to wheelchair users were also discussed by participants. Conclusions: People with SCI perceived participation restrictions, little changes in life habits, and uncertainty about the future during the second wave of COVID-19. The unique living conditions of people with SCI, ability to adapt life habits, and the lived experiences of people with SCI may have contributed to an overall resilience during the pandemic. Adaptive families, social contacts and technology made a difference during the pandemic.

High Education Institutions (HEI) play a key role in fostering sustainability since students will be future active society members. By providing them with the knowledge, skills, and mindset needed to address environmental challenges, they can contribute to increase sustainability in a long-term approach. With the effects of climate change strongly affecting water availability across planet, it is increasingly relevant to understand if higher education students are aware of this situation, to develop adequate measures to promote sustainable behaviors regarding water uses. This study aimed to assess students’ perceptions regarding water efficiency through a questionnaire submitted in 7 HEI in Portugal. Students recognized the importance of water with older students, women and science students demonstrating a greater awareness. Inspite of this 27% students do not know what the average water consumption in Portugal is and only 18% accurately reported the consumption range in Portugal. There is also a lack of knowledge (&gt;50% students) if common water efficiency measures are applied in their HEI. The main information sources identified by the students were “social communication” and “internet/social media”, revealing that water efficiency knowledge transfer in high education can be improved.

The study investigated the application of Wastewater-Based Epidemiology (WBE) as a tool for monitoring SARS-CoV-2 prevalence in a city in Northern Italy from October 2021 to May 2023. Starting from a widely applied deterministic model, this study proposed a variation to take into account population characteristics and virus biodegradation in the sewer network. The model calculated virus loads and corresponding COVID-19 cases over time in different areas of the city and was validated with healthcare data while considering viral mutations, vaccinations, and testing variability. The correlation between the predicted and reported cases was high across the three waves that occurred in the considered period, demonstrating the model’s capacity to predict relevant fluctuations in the number of cases. Population characteristics did not substantially influence the predicted and reported infection rates. Conversely, biodegradation significantly reduced the virus load reaching the wastewater treatment plant, resulting in a 30% reduction in the total virus load produced in the study area. This approach can be applied for comparing virus load values across cities with varying population demographics and sewer network structures, enhancing the comparability of WBE data for effective surveillance and intervention strategies.

Chlamydia trachomatis (Ct) infections are the most common sexually-transmitted infection (STI). Despite effective antibiotics for Ct, undetected infections or delayed treatment can lead to infertility, ectopic pregnancies, and chronic pelvic pain. Besides humans, chlamydia poses similar health challenges in animals such as C. suis (Cs) in pigs. Based on the similarities between humans and pigs as well as their chlamydia species, we use pigs as a large biomedical animal model for chlamydia research. In this study, we use the pig model to develop a vaccine candidate against Ct. The vaccine candidate consists of TriAdj-adjuvanted chlamydial protease-like activity factor (CPAF) protein. We tested two weekly administration options – twice intranasal (IN) followed by twice intramuscular (IM), or twice IM followed by twice IN. We assessed the humoral immune response not only in serum by CPAF-specific IgG including antibody avidity determination but also in cervical and rectal swabs by CPAF-specific IgG and IgA ELISAs. The systemic T-cell response was analyzed upon in vitro CPAF-restimulation via IFN-γ and IL-17 ELISpots as well as intracellular cytokine staining flow cytometry. Our data demonstrate that while the IN/IM vaccination mainly led to non-significant systemic immune responses, the vaccine candidate is highly immunogenic if administered IM/IN. This vaccination strategy induced high serum anti-CPAF IgG levels with strong avidity as well as high IgA and IgG levels in vaginal and rectal swabs and in uterine horn flushes. In addition, this vaccination strategy prompted a pronounced cellular immune response: Besides inducing IL-17 production, the vaccine candidate induced a strong IFN-γ response by CD4 T cells. In the IM/IN vaccinated pigs, these cells also significantly downregulated their CCR7 expression – a sign for differentiation into peripheral tissue homing effector/ memory cells. Conclusively, this study demonstrates strong immunogenicity of the IM/IN administered TriAdj-adjuvanted Ct CPAF vaccine candidate. Future studies will test vaccine efficacy of this promising Ct vaccine candidate. In addition, this project demonstrates suitability of the Cs pre-exposed outbred pig model for Ct vaccine development. Thereby, we aim to open the bottleneck of large animal models to facilitate the progression of Ct vaccine candidates into clinical trials.

Solar photovoltaic (PV) generation suffers from multiple serious issues, for example shading effects directly affect the performance of installed PV arrays. By studying these issues, it can play a key role in improving the limitations and performance of PV panels. The study of PV arrays under partial shading conditions is mentioned in many papers as a part of other studies and as an independent phenomenon. Therefore, it is essential to improve these studies and update them with new research and study this problem in detail to know how to limit the effects of partial shading irradiance conditions on PV arrays performances, including economical aspects. This paper proposes to study the effects of different partial shading irradiance conditions for a PV array in various configurations. The analysis is proved in detail through the simulation of the proposed PV array in the Matlab/Simulink environment. The obtained results show the performances of interconnected PV arrays under different partial shading irradiance and temperature conditions, including the solar array I-V and P-V characteristics. In addition, different PV array configurations with and without bypass and blocking protection diodes improve and minimize the effect of partial shading conditions and avoid the reductions in output power.

Aim: This study aims to analyze the structure of the co-authorship network in viral hepatitis research from 2000 to 2023 using data from the Web of Science (WoS) Core Collection. The objective is to identify key researchers, evaluate the collaborative dynamics, and understand the evolution of scientific contributions in this field. Method: This study utilized network analysis techniques to evaluate 60,720 publications related to viral hepatitis research indexed in the WoS Core Collection between 2000 and 2023. The analysis was conducted using Python (Version 3.10.5) in the PyCharm development environment (Software Version 2022.1.3). The co-authorship networks were assessed using macro-level indicators such as network density (the ratio of actual to possible connections), clustering coefficient (degree of node clustering), number of components (distinct connected subgroups), and average path length (average distance between nodes). Micro-level indicators including degree centrality (importance based on the number of connections), closeness centrality (proximity to other nodes), and betweenness centrality (frequency of a node on the shortest paths between others) were also analyzed.Result: The findings reveal that the viral hepatitis research network is characterized by low network density, indicating sparse overall collaboration. However, the clustering coefficient is high, suggesting strong collaborations within small, cohesive groups. Over the years, researchers such as Stefan Zeuzem, Maria Buti, and Fabien Zoulim have played pivotal roles, serving as central figures in the network. A noticeable increase in network density and clustering from 2020-2023 suggests growing collaboration in recent years.Conclusion: This study underscores the importance of international collaboration in advancing viral hepatitis research. Key researchers have emerged as influential contributors, facilitating global research activities. Network analysis provides valuable insight into the structure of these collaborations and helps identify potential areas for future research and partnerships to combat viral hepatitis globally. The results of this study should be used to reduce global healthcare disparities, promote research collaboration, and address viral hepatitis as a global public health problem.

Background/Objectives: The necessity and clinical utility of routine pre-procedural blood tests (PBTs) before neuraxial blockade remain controversial. This study evaluates the effectiveness of PBTs in identifying clinically significant conditions in an outpatient setting. Methods: This single-center retrospective study involved patients who received neuraxial blockade from January 2020 to August 2023. We extracted medical information and laboratory data from the electronic medical records during the pre-procedural period. Through multivariate regression analysis, we identified patient factors associated with abnormal laboratory results. Results: Advanced age (OR, 1.021; p = 0.026) and a history of cancer (OR, 2.359; p = 0.016) were significantly associated with elevated CRP levels (>0.30 mg/dL). Severe hyperglycemia (≥200 mg/dL) was found in 24 patients (3.88%), with a history of cancer being a strong predictor (OR, 6.764; p < 0.001). No significant abnormalities were observed in PT or PTT. Reduced eGFR (

Introduction: Clostridium difficile is a gram-positive, spore-forming anaerobe and a leading cause of healthcare-associated diarrhea globally, primarily linked to antibiotic use. Its enzyme, Glutamate Dehydrogenase (GDH), plays a critical role in the metabolism of glutamate, and its detection has become a key diagnostic marker for C. difficile infection (CDI). This meta-analysis evaluates various diagnostic modalities used for GDH detection, focusing on their sensitivity, specificity, and clinical utility. Methods: A systematic search of PubMed, Google Scholar, and Cochrane Library was conducted. Studies comparing GDH testing with gold-standard methods (PCR, toxigenic culture) for CDI diagnosis were included. Data were extracted from eligible studies, and statistical analyses were performed to calculate pooled sensitivity, specificity, diagnostic odds ratio (DOR), and area under the curve (AUC). Results: The pooled sensitivity and specificity of GDH testing were 93% and 92%, respectively. The DOR was calculated to be 30.98, and the AUC was 0.9794, indicating high diagnostic accuracy. GDH testing proved effective in identifying both infected and non-infected individuals, reducing false positives and negatives. Conclusion: GDH testing is a highly sensitive and specific diagnostic tool for CDI, supporting its role in clinical settings for early detection and intervention. Despite its strengths, variability in test performance suggests the need for further research to refine GDH-based protocols and ensure consistent outcomes across diverse healthcare environments.

This article presents a kinematic analysis of a 4-degree-of-freedom (DOF) robotic arm equipped with a 3-finger gripper, specifically designed for harvesting fruits of varying sizes. The kinematic modeling is thoroughly detailed, encompassing the equations of motion, homogeneous transformation matrices, and kinematic solutions required for the efficient operation of the robotic arm. This analysis is crucial for optimizing both the design and programming of agricultural robots, aiming to enhance harvesting efficiency and reduce labor costs. Additionally, an in-depth examination of the 3-finger gripper’s movement is provided, illustrating how MATLAB facilitates the simulation and visualization of its dynamic behavior during the opening and closing processes. The benefits of using MATLAB for this purpose are emphasized, including its ease of implementation, advanced simulation capabilities, and seamless integration with other tools to optimize the performance of robotic systems in agricultural settings. This study makes a valuable contribution to the field of agricultural robotics, offering technical insights that can be applied in the development of sophisticated robotic solutions for the modern agricultural industry.

Aim: To elucidate the international network structures and evolution of collaborations in capsule endoscopy research from 2000 to 2023 by analyzing co-authorship networks. Method: This study analyzed co-authorship patterns in capsule endoscopy research articles published from 2000 to 2023 using data from the Web of Science (WoS). I employed Python (version 3.10.5) in the PyCharm development environment (version 2022.1.3) to conduct a network analysis using social network analysis principles. The analysis included macro-level metrics (network density, clustering coefficient, components, and average path length) and micro-level metrics (degree centrality, closeness centrality, and betweenness centrality) to assess collaboration intensity, key contributors, and network cohesion. Result: The co-authorship network analysis revealed evolving collaboration patterns over three distinct periods (2000-2009, 2010-2019, and 2020-2023). Initially, the network exhibited low density and high fragmentation, with key contributors such as Guido Costamagna and Jonathan A. Leighton prominently positioned. Over time, the network expanded with increased density and clustering, though it remained fragmented. In recent years, the network showed increased cohesion with reduced components and notable contributors like Anastasios Koulaouzidis and Xavier Dray, reflecting the growing importance of international collaborations, particularly involving researchers from Japan, Italy, and Israel. Conclusion: The study highlights the dynamic nature of international collaborations in capsule endoscopy research, with increasing connectivity and influential contributors playing pivotal roles in advancing the field. These findings underscore the value of international cooperation in enhancing diagnostic and therapeutic approaches in capsule endoscopy, pointing to future opportunities for deeper collaboration and integration.

Background: Before the COVID-19 outbreak, food microbiology was crucial in identifying and preventing foodborne pathogens like Salmonella and E. coli. The pandemic underscored the importance of this discipline, highlighting the need for enhanced surveillance and microbiological control in the food chain to prevent future global public health threats. This research aimed to advance knowledge management in Bioeconomy, focusing on Eco-Intensification and biotechnology applications that directly affect food microbiology, especially in the context of the COVID-19 crisis. Methodology: The study involved a comprehensive literature review grounded in the epistemological principles of Bioeconomy, utilizing the Bibliometric Scopus database. This approach facilitated the exploration of the development of eco-intensification and biotechnology applications within food safety and nutrition microbiology. Results: The findings emphasize the importance of understanding the social and economic impacts of microbiological activities in food intake through a Bioeconomy lens. The research highlights the need for integrating microbiological insights into broader bioeconomic frameworks to address food safety and sustainability challenges effectively. Conclusion: Recommendations are provided for decision-makers to enhance public health agendas from a bioeconomic perspective. These recommendations aim to strengthen the focus on Bioeconomy and improve the management of interactions between food microbiology and the challenges exacerbated by the COVID-19 pandemic.

Traditional terrain analysis has relied on Digital Topographic Maps produced by national agencies and Digital Elevation Model (DEM) created using Airborne LiDAR. However, these methods have significant drawbacks, including the difficulty in acquiring data at the desired time and precision, as well as high costs. Recently, advancements and miniaturization in LiDAR technology have enabled its integration with Unmanned Aerial Vehicle (UAV), allowing for the collection of highly precise terrain data. This approach combines the advantages of conventional UAV photogrammetry with the flexibility of obtaining data at specific times and locations, facilitating a wider range of studies. Despite these advancements, the application of UAV LiDAR in terrain analysis remains underexplored. This study aims to assess the utility of UAV LiDAR for terrain analysis by focusing on the doline features within karst landscapes. In this study, we analyzed doline terrain using three types of data: 1:5000 scale digital topographic maps provided by the National Geographic Information Institute (NGII) of Korea, Digital Surface Models (DSM) obtained through UAV photogrammetry, and DEM) acquired via UAV LiDAR surveys. The analysis results indicated that UAV LiDAR provided the most precise three-dimensional spatial information for the entire study site, yielding the most detailed analysis outcomes. These findings suggest that UAV LiDAR can be utilized to represent terrain features with greater precision in the future which is expected to be highly useful not only for generating contours but also for conducting more detailed topographic analyses, such as calculating area and slope of the study sites.

Mangroves are critical ecosystems providing essential environmental services, making their conservation crucial. High-resolution remote sensing, particularly through unmanned aerial vehicles (UAVs), offers unprecedented resolution in ecosystem mapping. This study utilizes a multispectral sensor mounted on a UAV to map mangroves at Cardoso Island on Brazil’s southeastern coast and Suape on the northeastern coast. Using Geographic Object-Based Image Analysis (GEOBIA) for segmentation and classification, we employed machine learning algorithms to classify the primary mangrove species: Laguncularia racemosa, Rhizophora mangle, and Avicennia schaueriana. Two flight altitudes were used: a higher altitude for broad-scale mapping and a lower altitude for classification training, supplemented by field measurements for calibration. This method enabled the precise delineation of tree crowns and provided insights into species distribution and zonation, influenced by the distinct estuarine conditions of tides and sediment input. The high-resolution mapping achieved in this study enhances detailed analyses of mangroves, improving ecological models and biophysical estimations such as biomass and blue carbon stocks. This work highlights the potential of UAV-based multispectral imaging in advancing mangrove research and conservation efforts.

Fintech's emergence is one of the most significant developments in finance, and its application has been of much interest and popularity in recent decades. This study aims to explore the adoption of fintech in emerging economies by employing a structural equation model. The study's sample population consists of bank clients of Ethiopian commercial banks who have used financial technology platforms for at least one year. The total number of sample sizes is 440. The data collection instrument used for this study is a questionnaire (seven-point likert scales ranging from strongly disagree to strongly agree). Structural equation model (SEM) analysis was implemented using Amos software to examine the relationship between variables. The findings of the study support the hypotheses that various factors, including performance expectancy, effort expectancy, social influence, facilitating condition, traliaility, and user innovativeness, significantly influence the adoption and usage of fintech services. The study recommends that FinTech companies implement pilot programs to allow potential users to trial FinTech services on a limited basis before full commitment. Fintech industries should engage with local communities through events, seminars, and workshops to introduce fintech services. Having community leaders and respected individuals advocate for the technology can enhance acceptance.

The advancement of urban scholarship and the effective addressing of urban environment challenges necessitate the adoption of sophisticated analytical methods. Urban scholars and policymakers need advanced analytical methods to tackle issues like gentrification, housing affordability, and urban sprawl. Predictive models are crucial in the realm of urban sciences, and hyperparameter tuning methods can significantly improve their accuracy and efficiency. Our study compares three such methods — Optuna, Random Search, and Grid Search — using a housing transaction dataset. We find that Optuna is not only 5.58 to 70.50 times faster than the other two methods when applied to Random Forest and Gradient Boosting Machine algorithms, but also achieves lower error values in key evaluation metrics on the test set, such as mean absolute error, mean squared error, mean absolute percentage error and root mean squared error.

This study proposes a risk analysis model based on the principles of ISO 31000 and decision theory for biological agents with potential for offensive use in Brazil. Bibliographic research was conducted on the main models already published on the subject. The German risk classification system was adopted as the main reference because it is adjustable and adopts a semiquantitative approach. After translating and adapting this model to the Brazilian context, the analytic hierarchy process (AHP) was applied to generate a hierarchical tree with criteria and subcriteria to be considered in the risk assessment. A questionnaire was administered to a group of experts to evaluate the relevant criteria and subcriteria and the risks related to three biological agents (Bacillus anthracis, Yersinia pestis and Francisella tularensis), which were selected in an exploratory manner to exemplify the application of the model. According to the results, the criterion of impact of a biological attack was given greater importance when compared with the probability of occurrence of this event. According to the subcriteria, the greatest weight was attributed to human health when compared with agriculture, the environment, or the economy. Finally, in the evaluation of the three pathogens, B. anthracis was identified as having the highest risk for offensive use in Brazil. This research is focused on a practical approach and can be implemented by competent agencies to foster their capacity for biological defense by determining which pathogens represent the greatest risk to society.

This study investigates the environmental parameters contributing to the Urban Heat Island (UHI) effect in historically built environments, focusing on Matera's Street Canyon. The primary objective is to enhance understanding of heritage centers' ecological sustainability and management frameworks. The study involves two main phases: the initial research and development phase, including a comprehensive literature review and methodology development, followed by the empirical data gathering and analysis phase, utilizing advanced techniques such as 3D laser scanning, satellite imagery, and meteorological data integration. Key findings reveal significant correlations between urban morphology, material properties, and UHI intensity, suggesting stra-tegic urban planning interventions to mitigate UHI effects. This research provides actionable in-sights for urban planners and policymakers, emphasizing the importance of balancing heritage preservation with modern sustainability needs.

This paper presents the concept of applying incremental capacity analysis (ICA) on the OCV curve in the SoC space. The OCV curve can be obtained from any sequence of discharge or charge current or power pulse with a necessary rest period to allow the cell to reach a pseudo-OCV after each pulse. With a higher resolution (>100 pulses) in the full SoC window, an OCV vs SoC curve can be obtained with sufficient accuracy to perform an ICA on the obtained OCV curve. ICA as a diagnostic technique has commonly been applied on Li-ion cells with a constant charge and discharge at slow currents. However, a slow controlled constant current charge or discharge is normally not feasible and cannot be easily applied to a battery in an application. Here we revisit pulse-based ICA to supplement the conventional constant-current-based technique. Conventional ICA performed on ageing data with constant current is directly compared to ICA performed on a selection of higher resolution OCV curves. The main advantage of OCV-ICA is that it can be applied to most cells and systems without significant interruption of normal cell operation. OCV-ICA provides valuable insights into ageing mechanisms as well as detailed information on changes in internal resistance.

Single particle tracking is a powerful technique to investigate the motion of molecules or particles. Here we review methods for analyzing the reconstructed trajectories, step needed for deciphering the underlying mechanisms driving the motion. First, we review the traditional analysis based on the mean square displacement (MSD), highlighting sometimes-neglected factors potentially affecting results accuracy. We then report methods that exploit distributions of parameters other than displacements, e.g. angles, velocities, and times and probabilities of reaching a target, discussing how they are more sensitive in characterizing heterogeneities and transient behaviors masked in MSD analysis. Hidden Markov Models are also used for this purpose, and these allow identifying different states, their populations and the switching kinetics. Finally, we discuss a rapidly expanding field: trajectory analysis based on machine learning. Various approaches, from random forest to deep learning, are used to classify trajectory motions, which can be identified by motion models or by model-free sets of trajectory features, either previously defined or automatically identified by the algorithms. We also review free software available for some of the analysis methods. We emphasize that approaches based on combined different methods, including classical statistics and machine learning, may be the way to obtain the most informative and accurate results.

The porosity of freshwater and sea ice is one of the main parameters that determine its strength. The strength of ice varies over a wide range of values, and the differ-ences in the intensity of the mechanisms of ice porosity formation in different water areas can be one of the possible reasons for these variations. The water mass contains gases in two forms: gases dissolved in the water mass, as well as gas bubbles that are formed when wind waves break up, and bubbles that float up from the seabed. The article presents the results of the analysis of the role of each of these forms in the formation of gas inclusions (pores) into the crystal structure of ice. The estimates showed that the main source of gas pores in ice crystals is the gas bubbles coming to the surface from the bottom, formed during the decomposition of bottom sediments or during gas leaks from near-bottom oil and gas fields. The possibility of gas bubbles occurring and rising to the ice-water boundary depends on the presence of bottom sources of the gases, the intensity of dissolution of the bubbles and the depth of the water area. Therefore, the variation in the porosity and the strength of ice over the space of the water areas can be associated with the changes in their depths, and the presence and location of the natural gas sources.

This research introduces an Intelligent Robotic Arm with Adaptive Collision Avoidance, employing real-time current fluctuation analysis for human-proximity detection. Precision and versatility in motors and actuators are given top priority in the robotic arm setup. Motor power lines are continually monitored by integrated high-precision current sensors, and a real-time data processing system separates natural fluctuations from those caused by outside influences. When a human comes into contact with the surface of the robotic arm, the system excels at detecting their closeness by identifying unique patternsin the variations of current. This sets off an adaptive collision avoidance system, which quickly flips the main power supply’s kill switch to bring the vehicle to an emergency stop. A crucial component is adaptability, as the system dynamically modifies sensitivity in response to environmental condi- tions. Comparative studies show that this approach performs better than conventional static sensing techniques. Experiments under control confirm the great precision, accuracy, and low false positive rate. The use of a failsafe technique improves system integrity by preventing false alarms and enabling recovery after an emergency

This qualitative research investigates how supply chain innovations drive marketing differentiation in consumer goods companies. In a competitive global marketplace, firms are increasingly leveraging advanced supply chain management (SCM) practices to enhance operational efficiency and create distinctive market positions. The study explores five key supply chain innovations—digitalization, sustainability practices, predictive analytics, agile supply chain models, and collaborative partnerships—and their impact on marketing differentiation strategies. Data were collected through semi-structured interviews with 20 executives and managers from leading consumer goods companies, analyzing themes related to innovation adoption, challenges, and outcomes. Findings indicate that digital technologies such as IoT, AI, and blockchain are pivotal in improving supply chain visibility, optimizing inventory management, and enabling real-time decision-making, thereby supporting personalized customer experiences and agile responses to market dynamics. Sustainability practices, including sustainable sourcing and green logistics, emerge as critical drivers of brand reputation and consumer trust, aligning with growing consumer preferences for eco-friendly products. Predictive analytics facilitate better demand forecasting and pricing strategies, while agile supply chain models enhance flexibility and responsiveness in delivering products faster to market. Despite benefits, challenges include integrating innovations with legacy systems, managing resistance to change, and addressing data security concerns. Strategies for overcoming these barriers include leadership commitment, cross-functional collaboration, talent development, and strategic partnerships. By embracing these strategies and innovations, consumer goods companies can strengthen their competitive positioning, enhance customer satisfaction, and achieve sustainable growth in a rapidly evolving marketplace.

The inherent capabilities of the K-means++ algorithm to approximate system dynamics within complex systems are subjected by constructing a network structure that captures interconnections among identified components, extending its original purpose as a data clustering method and transforming it into a tool for systems analysis. Leveraging advanced measurement technologies and sophisticated data collection systems, the K-means++ algorithm unveils hidden relationships among components and identifies critical elements. This study explored the algorithm's potential, facilitating the identification of critical components to enhance system operation, control, optimization, and decision-making and examining the practicality and resiliency of the method in real-world application with noisy and limited data. A case study conducted on power systems (IEEE 39-bus and IEEE 300-bus systems) exemplifies K-means++'s capacity to accurately identify critical components and approximate system dynamics, supported by performance metrics affirming its effectiveness and robustness in system analysis through measurements of bus similarity within clusters based on standard deviation and comparison of net tie-line flows in equivalent networks with the original network across scenarios. Performance metrics, including the Silhouette Score, Davies-Bouldin Index, and Variation of Information (VI) score, further validated K-means++'s performance, yielding reliable and consistent results.

Transcranial magnetic stimulation (TMS) represents a distinctive technique for non-invasive brain stimulation. Recent advancements in image processing have enabled the enhancement of TMS by integrating magnetic resonance imaging (MRI) modalities with TMS via a neuronavigation system. The aim of this study is to assess the efficacy of navigated TMS for cortical mapping in comparison to surgical mapping using direct electrical stimulation (DES). The study involved 30 neurosurgical procedures for tumors located in or adjacent to the precentral gyrus. The DES points were compared with TMS responses based on the original distances of vectorial modules. There was a notable similarity in the points obtained from the two mapping methods. The distances between the geometric centers of TMS and DCS were 4.85 ± 1.89 mm. A strong correlation was identified between these vectorial points (r = 0.901, p < 0.001). The motor threshold in TMS was highest in the motor cortex adjacent to the tumor compared to the normal cortex (p < 0.001). Patients with deficits exhibited excellent accuracy in both methods. In view of this, TMS demonstrated reliable and precise application in brain mapping, which is a promising method for preoperative functional mapping in motor cortex tumor surgery.

A fully automated bacteria whole genome sequencing (WGS) assay was evaluated to characterize Mycobacterium tuberculosis (MTB) and non-tuberculosis Mycobacterium (NTM) clinical isolates. Results generated were highly reproducible with 100% concordance in species and sub-lineage classification, and 92% concordance between antimicrobial resistance (AMR) genotypic and phenotypic profiles. These findings demonstrate that a fully automated WGS assay, with a short turnaround time of 24.5 hours, provides timely and valuable insights into MTB outbreak investigation while providing reliable genotypic AMR profiling consistent with traditional antimicrobial susceptibility tests (AST). This study establishes a favorable proposition in the adoption of an end-to-end fully automated WGS solutions for decentralized TB diagnostics, thereby aiding in WHO’s vision of tuberculosis eradication.

Financial statements depict the condition of a company and need to be analyzed and evaluated to assess its performance. This research aims to analyze financial statements to describe the financial condition, measure business development over time, and evaluate the achievement of the com-pany's objectives. An optimization analysis of financial ratios is performed using the Weighted Goal Programming (WGP) model, which addresses multiple objectives by applying weights based on their priorities. The Analytical Hierarchy Process was used to determine the priority weights of deviation variables from each financial ratio target. Financial ratios were selected based on their impact on profit using factor analysis. The constructed WGP model aims to minimize deviations in Return on Assets, Operating Ratios, Operating Income Ratio, Total Assets Turnover, and Current Ratio. Computational calculations to solve the WGP model are per-formed using Python, with pseudocode provided. A case study on a company in the garment and textile sector was conducted and found that the Operating Ratio, Return on Assets, Operating Income Ratio, and Current Ratio still need improvement by developing strategies to achieve the targets. Sensitivity analysis was also employed to assess the resilience of the model in response to alterations in data.

Salmonella sp. is a globally prevalent organism responsible for causing salmonellosis, a foodborne illness. Salmonella Typhimurium represents a type of Salmonella sp. not associated with typhoid fever but capable of causing stomach and intestinal inflammation or severe infection. In the present study, 150 uncharacterized proteins of S. Typhimurium were randomly selected from UniProtKB and analyzed using TMHMM, PROSITE, STRING, DEG, and BLASTp. Results indicated that 32 uncharacterized proteins (21%) were predicted to be transmembrane proteins involved in various biological pathways. Among them, 30 transmembrane proteins were predicted to be essential and non-host homologous. This study's findings suggest their potential as drug targets against salmonellosis.

Premalignant lesions in the bronchial epithelium represent early stages of squamous cell lung carcinoma, challenging to detect with conventional methods. While previous studies have focused on gene expression, here we examine transcriptomic alterations associated with lesion development with the emphasis on protein-coding transcripts. We reanalyzed publicly available RNAseq dataset on airway epithelial cells from 82 smokers with and without premalignant lesions. Transcript abundances were quantified using kallisto, and differential expression and transcript usage analysis was conducted using the sleuth and RATs packages. Functional characterization included overrepresentation analysis (clusterProfiler), weighted co-expression network analysis (WGCNA), and network analysis (Enrichr-KG). We detected 5,906 differentially expressed transcripts, with significant enrichment in pathways related to oxidative phosphorylation and mitochondrial function. Transcript-level WGCNA identified single module correlated with dysplasia status, enriched in cilium-related biological processes. Analysis of hubs within this module highlighted key genes including RABL2B, DNAH1, EFHC1 and VWA3A, and revealed transcription factors such as FOXJ1 and ZNF474 as potential regulators. Our findings underscore the value of transcript-level analysis in uncovering novel insights into premalignant lesion biology. By examining transcripts rather than genes, we identified potential biomarkers associated with early lung carcinogenesis.

Polymer-derived ceramic (PDC) based coatings like Si-C-N and their derivatives are gaining importance day by day in N/MEMS and aerospace due to their thermos-mechanical stability and conductivity. The crystallized, amorphous, and near amorphous morphology of SiCN nanocomposite coatings based on deposition conditions requires thorough investigation for appropriate utilization as they lead to differences in mechanical properties (quantified using nanoindentation in this case). A 4-stage model was proposed based on Raman spectroscopy due to the N₂-Ar pressure variations during the deposition process of SiCN coatings by magnetron sputtering. The integral intensity of the G (graphitic), disorder (D), and tetrahedral (T) peaks namely I_G, I_D, and I_T were calculated after the deconvolution of the spectra. The sp² domain size and defect parameters were evaluated and correlated with the hardness and different bond formation involving Si, C, and N. Image analysis revealed the atomic migration involved during the growth process leading to crystallization along with the formation of voids and defects. The observations were supported by FTIR and TEM-SAED analysis. The outcomes provide a foundation causing an urge to develop similar models with further elemental additions and correlate with various physical properties.

: This study presents energy and exergy analyses conducted on a Gifford-McMahon cycle refriger-ator. Through detailed numerical simulations, the performance of the refrigerator is thoroughly assessed, with a particular focus on energy and exergy losses. The obtained results are compared with Sankey and Grassman diagrams, providing visual representations of energy and exergy flows within the system. The localization of exergy losses is carefully analysed to identify key areas for optimization aimed at enhancing efficiency and power output. By pinpointing sources of ex-ergy destruction, targeted improvements can be implemented to maximize the overall perfor-mance of the refrigerator. Overall, this research contributes to a deeper understanding of the thermodynamic behaviour of Gifford-McMahon cycle refrigerators and provides valuable insights for optimizing their performance in practical applications.

Coenzyme Q (CoQ) is a lipidic compound widely distributed in nature with crucial functions in metabolism, protection against oxidative damage and ferroptosis, and other processes. CoQ biosynthesis is a conserved and complex pathway involving several proteins. COQ2 is a member of the UbiA family of transmembrane prenyltransferases that catalyzes the condensation of the head and tail precursors of CoQ, a key step in the process because its product is the first intermediate that will be modified in the head by the next component of the synthesis process. Mutations in this protein have been linked to primary CoQ deficiency in humans, a rare disease predominantly affecting organs with a high energy demand. The reaction catalyzed by COQ2 and its mechanism are still unknown. Here we aimed at clarifying COQ2 reaction by exploring possible substrate binding sites using a strategy based on homology, comprising the identification of ligand-bound homologs with solved structures available in the Protein Data Bank (PDB) and their subsequent structural superposition to the AlphaFold predicted model for COQ2. The results highlight some residues located on the central cavity or the matrix loops that may be involved in substrate interaction, some of them mutated in primary CoQ deficiency patients. Furthermore, we analyze the structural modifications introduced by the pathogenic mutations found in humans. These findings shed new light on the understanding of COQ2 function and, thus, CoQ biosynthesis and pathogenicity of primary CoQ deficiency.

A comprehensive Energy Audit of a Maintenance facility was performed to assess its energy performance and identify scope for improvement. The facility’s Energy Use Intensity (EUI) for 2022 was 404 kWh/m2 — more than double the Benchmark EUI for Maintenance facilities (151 kWh/m2) recommended by EnergyStar. Furthermore, the Load Factor for 2022 was 0.22, which is lower than the recommended minimum of 0.75 for an efficient building. The audit encompassed an in-depth evaluation of the building's structural and operational characteristics, comprising HVAC systems, lighting, building envelope, and energy-intensive machinery. An energy model of the building was developed to emulate the baseline building energy performance for 2022. Following the energy model's development and validation, an analysis was conducted to identify energy-intensive areas and opportunities for optimization. Energy Efficiency Measures were then formulated, focusing on improving energy efficiency while focusing on energy consumption reduction and GHG emission reduction. Results demonstrated the potential of Energy Audits and Modeling to enable significant reductions in energy consumption and promote sustainable building practices. Among the Energy Efficiency Measures considered, re-sizing and decarbonizing HVAC equipment contributed the most to energy savings, with a 100% decrease in natural gas and 37% decrease in electricity use annually.

Introduction. Psoriatic disease (PsD), encompassing psoriasis, psoriatic arthritis, inflammatory bowel disease, and uveitis, presents a significant burden due to its chronic and diverse inflammatory nature, affecting various clinical domains including skin, joints, and internal organs. Psoriasis, affecting up to 3% of the global population, not only poses physical challenges but also profoundly impacts patients' psychological well-being, ranking among the most debilitating chronic conditions. Furthermore, PsD exhibits a spectrum of manifestations ranging from skin lesions like plaque psoriasis to systemic complications such as cardiovascular comorbidities, necessitating comprehensive assessment and management strategies. The increasing understanding of the aetiopathogenic mechanisms of these immune-mediated diseases and of the proinflammatory intracellular signalling pathways involved in Psoriatic disease (PsD) has facilitated the identification and development of new small molecules capable of inhibiting JAK proteins, emerging as effective treatment options for rheumatic and dermatological manifestations JAK inhibitors act rapidly, within a few days, with a striking beneficial class effect on pain. The oral formulation they share makes them a well-tolerated class of drugs, with a clear advantage over FAME in terms of convenience of administration, improving therapeutic compliance. Material and method. This observational, retrospective study conducted in a single-centre dermatology-rheumatology consultation of a second-level hospital in Granada, Spain, focused on patients diagnosed with Psoriatic Arthritis (PsA) over the last two years, who initiated treatment with Tofacitinib or Upadacitinib due to DMARD failure, excluding those with major contraindications to JAK inhibitors. Results: This study analyzed data from 32 patients diagnosed with Psoriatic Arthritis (PsA), focusing on their demographics, disease characteristics, and treatment history. The majority of patients (75%) initiated treatment with Tofacitinib, while the remainder started with Upadacitinib. The mean age of the patients differed between the two treatment groups. All patients met the CASPAR criteria for PsA diagnosis, with predominantly peripheral joint involvement. The average time from PsA diagnosis to initiation of JAKinhib treatment was 6.5 years, slightly longer for Upadacitinib users. Most patients presented with cutaneous psoriasis, and a minority exhibited radiographic erosions. Before JAKinhib therapy, all patients had previously received DMARDs. A subset of patients received concomitant DMARD therapy, predominantly methotrexate. Additionally, a proportion of patients were on low-dose corticosteroids. Baseline CRP and ESR levels were indicative of systemic inflammation. Disease activity measures at baseline indicated moderate disease activity, with a substantial proportion of patients having mild psoriasis involvement. Upadacitinib recipients with psoriasis primarily exhibited mild involvement. This study provides valuable insights into the characteristics and treatment patterns of PsA patients initiating JAKinhib therapy. Discusion. In this study, the efficacy, safety, and real-world outcomes of Janus kinase inhibitors (JAKinhibs) in the treatment of Psoriatic Arthritis (PsA) were assessed and compared with findings from pivotal randomized controlled trials (RCTs). Both Tofacitinib and Upadacitinib demonstrated significant efficacy in PsA patients refractory to DMARDs and TNF inhibitors, with rapid improvement in joint and skin activity indices. Although patients in this cohort exhibited younger age, higher female prevalence, and shorter disease duration compared to those in RCTs, treatment responses were comparable or even superior. Notably, despite fewer concurrent DMARDs and a higher proportion of patients receiving monotherapy, JAKinhibs maintained a favorable safety profile, with a low frequency of mild adverse events leading to treatment discontinuation. These findings emphasize the robust efficacy and tolerability of JAKinhibs in real-world clinical settings, supporting their role as effective therapeutic options for PsA patients.

In the context of an increasingly globalized economy and rapid technological advancements, the agri-food sector faces unprecedented challenges and opportunities. Digital traceability systems have emerged as pivotal in enhancing operational efficiencies, ensuring food safety, and fostering supply chain transparency. This study conducts a comparative analysis of the adoption and impact of digital traceability technologies across member countries of the Organisation for Economic Co-operation and Development (OECD). Utilizing a multidimensional analytical framework, this research investigates the spectrum of national regulations, legal frameworks, and specific food commodities most influenced by digital traceability implementations. It systematically evaluates the efficacy of these systems in addressing consumer transparency demands, regulatory compliance, and the overarching goal of sustainable agri-food supply chains. Through a meticulous examination of case studies and empirical data, the paper elucidates the dynamic interplay between technological innovation and regulatory environments, offering insights into best practices and potential barriers to digital traceability integration. This comprehensive inquiry aims to contribute to the scholarly discourse on digital traceability, providing actionable recommendations for policymakers, industry stakeholders, and academia to navigate the complexities of modern agri-food systems.

In this paper, the concept of absolute airspace is further elaborated, and the time transform effect, the frequency transform relation of clock timing, and the principle of Doppler effect of special relativistic light are analyzed and demonstrated. Based on the concept of absolute airspace, a new and accurate Doppler effect relation of light (electromagnetic wave) is proposed. It is proved that there is a synchronous relationship between the time shift effect and the frequency change of the timing inside the clock. When the light (electromagnetic wave) source is in motion, the Doppler effect includes two physical mechanisms: the frequency change caused by time transformation effect and the frequency change caused by relative motion. When the light source is in motion, the Doppler effect of the light there are some differences in different directions due to the rotation of the earth. The relation of Doppler effect of special relativistic light is only a highly approximate relation, and its theoretical basis, special relativity, is flawed in principle.

Yield calculation is an important link in modern precision agriculture, which is an effective means to improve breeding efficiency, and adjust planting and marketing plans. With the continuous progress of artificial intelligence and sensing technology, yield calculation schemes based on image processing technology have many advantages such as high accuracy, low cost, and non-destructive calculation, and have been favored by a large number of researchers. This article reviews the research progress of crop yield calculation based on remote sensing images and visible light images, describes the technical characteristics and applicable objects of different schemes, and focuses on detailed explanations of data acquisition, independent variable screening, algorithm selection and optimization. Common issues are also discussed and summarized. Finally, solutions are proposed for the main problems that have arisen so far, and future research directions are predicted, with the aim of achieving more progress and wider popularization of yield calculation solutions based on image technology.

A microfinance scheme has emerged as a crucial tool in reducing poverty gaps in many developing countries. A notable player in the arena is Amanah Ikhtiar Malaysia (AIM), a pioneer in microfinancing in Malaysia since 1987. AIM’s microfinance program injects small-scale businesses, particularly benefiting single mother entrepreneurs, contributing to capacity-building and empowerment. However, the advent of the COVID-19 pandemic, coupled with Movement Control Order (MCO), has adversely affected various business sectors and vulnerable groups, including single mothers engaged in microfinancing enterprises. This study employs primary data to assess the impact of AIM’s microfinancing programs on single-mother entrepreneurs during the crisis. Utilizing a quantitative approach with a two-stage sampling process involving 422 respondents in urban areas, the research evaluates the relationship between empowerment indicators (economic, social, digital, and psychological) and management and governance aspects of program effectiveness. The findings reveal that the microfinancing program’s overall effectiveness, economic, digital and psychological empowerment indicators, and program management are at a moderate level, while social empowerment is high. Economic and digital empowerment, along with effective management, positively and significantly influence program effectiveness, whereas social empowerment has a negative and significant impact. The study concludes with recommendations for enhancing AIM’s microfinance program, equipping single mother entrepreneurs to better navigate future challenges, and informing policy formulation related to their empowerment.

Information geometry (IG) seeks to characterize the structure of statistical geodesic models from a differential geometric point of view. By considering families of probability distributions as manifolds with coordinate charts determined by the parameters of each individual model, the tools of differential geometry, such as divergences and metric tensors, provide effective means of studying their characteristics. The research undertaken in this paper presents a novel approach to the modelling study of information geometrics of a queueing system. In this context, the manifold of a stable M/G/1queue is characterised from the viewpoint of IG. The Fisher Information matrix (FIM) as well as the inverse of (FIM), (IFIM) of stable M/G/1 queue manifold are devised. In addition to that, new results that uncovered the significant impact of stability of M/G/1 queue manifold on the existence of (IFIM) are obtained. The Kullback’s divergence (KD), and J-divergence (JD).New result has been devised on the significant impact of both server utilization and squared coefficient of variation of the underlying M/G/1 queue manifold on both (KD) and (KD) are devised. Also, it is revealed that stable M/G/1 QM is developable (i.e., has a zero Gaussian curvature) and has a non-zero Ricci Curvature Tensor (RCT). Novel stability dynamics of M/G/1 queue manifold is revealed by discovering the mutual dual impact between the behaviour of (RCT) and the stability and the instability phases of the underlying M/G/1 queue manifold. Furthermore, a new discovery that presents the significant impact of stability of M/G/1 queue manifold and the continuity of the unique representation between M/G/1 queue manifold and Ricci Curvature Tensor (RCT). The information matrix exponential (IME) is devised. It is also shown that the obtained (IME) is unstable. Also, it is shown that stability of the devised (IME) enforces the instability of M/G/1 queue manifold. Unifying IG with Queueing Theory enables the study of dynamics of queueing system from a novel Riemannian Geometric (RG) point of view, leading to the analysis of the stable M/G/1 queue, based on the Theory of Relativity (TR).Extending the study over two new additional divergence measures, namely and together with a complete illustrative numerical results for all these measures including KD, JD. This links Queueing theory, IG with deep machine learning and metric learning. Furthermore, this reveals the revolutionary approach of queue learning. Full analytic study of Gaussian curvatures subject to both Angular and Monge techniques together with the overall stability dynamics impact on these curvatures. Full analytic study of Einestein Tensor and Stress Energy Tensor together with the overall stability dynamics impact on these curvatures. The inclusion of the definitions of Gaussian and Ricci, Ricci scalar curvatures and Einstein Tensor together with their physical interpretations; The proposed novel approach for the pioneer visualization of queueing systems via computational information geometry. The determination of new important links between classical queueing theory and other mathematical disciplines, such as IG, matrix theory Riemannian geometry and the THEORY OF RELATIVITY by providing for first time i) The full detailed derivations of the Gaussian curvature ii) The Ricci curvature tensor and iii) The full physical as well as the geometric interpretation of these new results. The provision of a novel link between Ricci Curvature (RCT) and the stability analysis of the stable M/G/1 QM. The full investigation of the newly introduced QT-IG unifiers together with the impact of stability/ instability of the underlying M/G/1 QM on them. The full investigation of the newly introduced (QIGU) unifiers together with the impact of stability/ instability of the underlying M/G/1 QM on them.

The therapeutic management of acquired thrombotic thrombocytopenic purpura (aTTP) has recently benefited from the introduction of caplacizumab, an agent directed to inhibition of platelet aggregation. This real-world analysis investigated the epidemiology, the demographic and clinical characteristics of aTTP patients in Italy before and after caplacizumab introduction in 2020. Hospitalized adults with aTTP were included using the administrative databases of healthcare entities covering 17 million residents. Epidemiological estimates of aTTP considered the 3-year period before and after caplacizumab introduction. After stratification by treatment or not with caplacizumab, aTTP patients were characterized for their demographic and clinical features. The annual incidence before and after 2020 was estimated in the range 4.3-5.8 cases/million and 3.6-4.6/million, respectively. From 2018 to 2022, 393 patients with aTTP were included, 42 of them treated with caplacizumab. Caplacizumab-treated patients were aged on average 46.8 years, 31% were males, and showed tendentially better clinical outcomes: no treated patients died at either 1 month or 3 months after caplacizumab treatment initiation, compared to 10.5% (1 month) and 11.1% (3 months) mortality among the untreated. Caplacizumab treatment was associated with a trend towards shorter hospital stays. These findings suggest that caplacizumab advent provided clinical and survival benefits for patients with aTTP.

The objective of this study was to investigate the liquefaction resistance of chemically improved sandy soils in a straightforward and accurate manner. Using only the existing experimental databases and artificial intelligence, the goal was to make predictions without conducting physical experiments. Emphasis was placed on the significance of data from 20 loading cycles of cyclic undrained triaxial tests to determine the liquefaction resistance and the contribution of each explanatory variable. Different combinations of explanatory variables were considered. Regarding the predictive model, it was observed that a case with the liquefaction resistance ratio as the dependent variable and other parameters as explanatory variables yielded favorable results. In terms of exploring combinations of explanatory variables, it was found advantageous to include all variables as doing so consistently resulted in a high coefficient of determination. The inclusion of the liquefaction resistance ratio in the training data was found to improve the predictive accuracy. In addition, the results obtained when using a linear model for the prediction suggested the potential to accurately predict the liquefaction resistance using historical data.

A significant body of research has examined the accuracy and diversity of several types of recommendation systems. However, little is known about the psychological mechanisms underlying the effects of the different types of recommendation systems on user satisfaction. The findings of our experiment showed that user satisfaction is influenced by shopping goal. Specifically, when a user’s shopping goal aligns with the type of recommendation system, the user satisfaction is enhanced. Our study evaluated the mediating role of feeling right and psychological reactance for a better understanding of this relationship. We further tested the moderated mediation effect of feeling right and psychological reactance moderated by the user shopping goal. For goal-directed users, accurate recommendations trigger the activation of feeling right, consequently increasing the user satisfaction. Conversely, when exploratory users face accurate recommendations, they activate psychological reactance, which leads to a reduction in user satisfaction.

Efficient commencement of clinical trials is pivotal for their successful execution. The purpose of this study was to determine and examine the factors that contribute to trial start-up delays. The study assessed 20 clinical trials' start-up stages in order to identify relevant variables. Results showed that trials with an emphasis on devices, trials that did not outsource, trials that utilized less auxiliary services, and trials that employed interventional designs had quicker start-up times than observational studies. Furthermore, approval times were substantially shortened by using a centralized Institutional Review Board (IRB) rather than a local IRB. Furthermore, compared to studies that successfully enrolled subjects, those who failed to do so required more time to complete contracts and budgets and secure IRB clearance. This study underscores the diverse impact of clinical trial features on start-up timelines. Understanding these factors is crucial for optimizing the initiation process of clinical trials.

This study proposes a methodology for identifying time intervals in which time-of-use (ToU) energy tariffs can be set. This is achieved by analyzing the variability in electric power demand and esti-mating the potential for demand flexibility. The proposed methodology is as follows: first, data preprocessing is performed, focusing on the organization and cleaning of individual consumption records. Subsequently, the data are processed and classified by using consumption variability analysis and clustering techniques. Then, representative clusters are selected and time intervals are analyzed to identify periods of high electric power consumption variability. This methodology was tested with real data from smart meters in the Colombian electrical system, in which time intervals with potential for settinh ToU tariffs were ultimately identified. This work promotes the implementation of demand response strategies that enhance sustainability and facilitate the transition to a more resilient energy landscape both nationally and internationally. The findings are expected to contribute to the formulation of tariff schemes that encourage con-scious changes in electric energy consumption patterns.

We conducted a hybrid-design study on a historical cohort of 359 adult recipients of a liver graft who received transplants between 1996 and 2002. The study aimed to identify predictors of survival and investigate the prevalence of co-morbidities among long-term survivors. The actuarial (95% CI) patient survival of the overall study cohort was 96% (94.6%-98.3%), 69% (64.2%-73.6%), 55% (49.8%-59.9%), 42.8% (37.6%-47.8%), and 34% (29.2%-38.9%) at 1, 5, 10, 15, and 20 years, respectively. The actuarial (95% CI) graft survival was 93.8% (91.6%-97.2%), 67.6% (62.2%-71.5%), 54.3% (49.6%-59.3%), 42.1% (37.3%-47.4%), and 33.8% (29.0%-38.4%) at 1, 5, 10, 15, and 20 years, respectively. The leading cause of death was hepatitis C virus recurrence (24.6%), followed by extrahepatic malignancies (16.9%), infection (14.4%), and hepatocellular carcinoma recurrence (14.4%). The Cox proportional hazards analysis revealed that several independent factors were associated with the survival probability. These factors include younger donor and recipient ages (p=0.001 and 0.004, respectively), female recipient sex (p<0.001), absence of HCV (p<0.01), absence of HCC (p=0.001), and absence of diabetes mellitus at one year (p<0.01). At the latest follow-up, the leading comorbidities in the long-term survivors were hypertension (53.6%), obesity (18.7%), diabetes mellitus (17.1%), hyperlipidemia (14.7%), chronic kidney dysfunction (14.7%), and extrahepatic malignancies (13.8%), with 73.9% of patients having more than one complication. The Kaplan-Meier probability (95% CI) of complication-free survival was 65.4% (60.2%-70.3%), 38.4% (33.4%-43.7%), 17.8% (14.1%-22.2%), 7.2% (4.8%-10.5%), and 1.94% (0.85%-4.15%) at 1, 5, 10, 15, and 20 years, respectively. Aging with a liver graft is associated with an increased risk of complications and requires ongoing care to reduce the long-term attrition rate resulting from chronic immunosuppression.

The genus Lirianthe in the family Magnoliaceae includes approximately 25 species, each with exceptional landscaping and horticultural or medical worth. Many of these plants are considered rare and protected due to their endangered status. The limited knowledge of species within this genus and the absence of research on its chloroplast genome have greatly impeded studies on the relationship between its evolution and systematics. In this study, the chloroplast genomes of 8 species from the genus Lirianthe were sequenced and analyzed, their phylogenetic relationships with other genera of the family Magnoliaceae are also elucidated. The results showed that the chloroplast genome sizes of the 8 Lirianthe species ranged from 159,548 to 159,833 bp. The genomes consisted of a large single copy region, a small single copy region, and a pair of inverted repeat sequences. The GC content was very similar across species. Gene annotation revealed that the chloroplast genomes contained 85 protein-coding genes, 37 tRNA genes, and 8 rRNA genes, totaling 130 genes. Codon usage analysis indicated that codon usage was highly conserved among the 8 Lirianthe species. Repeat sequence analysis identified 42-49 microsatellite sequences, 16-18 tandem repeats, and 50 dispersed repeats, with microsatellite sequences being predominantly single nucleotide repeats. DNA polymorphism analysis revealed 10 highly variable regions located in the large single copy and small single copy regions, among which rpl32-trnL, petA-psbJ and trnH-psbA are recommended candidate DNA barcodes for the genus Lirianthe species. The inverted repeat boundary regions show little variation between species and are generally conserved. Phylogenetic tree analysis confirmed the monophyly of the genus Lirianthe and its closest relationship with the genera, Talauma and Dugandiodendron. Morphological studies found noticeable differences between Lirianthe species in aspects including leaf indumentum, stipule scars, floral orientation, tepal number, tepal texture, and fruit dehiscence. In summary, this study elucidated the chloroplast genome evolution within Lirianthe and laid a foundation for further systematic and taxonomic research of this genus.

For underwater vehicles navigating in Arctic Sea ice-covered waters, fatigue damage is a crucial issue. Many scholars have conducted low-temperature fatigue analysis on low-temperature ma-terials and substrate platforms for ships, and the results show that low-temperature is beneficial for improving the mechanical properties of materials. However, they mainly focus on low-temperature performance experiments and simulation analysis of standard components of materials, and there are very few fatigue life experimental studies on underwater vehicle me-chanical structures. This paper conducts experimental investigations on a scaled model of an underwater vehicle rudder mechanism in a polar environment laboratory. Using a comparative analysis method involving simulations and experiments, the low-temperature fatigue test data of the scaled underwater vehicle rudder mechanism are analyzed, and the quantified analysis be-tween fatigue and different low-temperature loading cycles, as well as the influence of icing on the fatigue life, is explored. It is indicated that the arctic environment can decrease the fatigue life of the underwater vehicle rudder mechanism by deteriorating its material properties. The paper builds the foundation for the fatigue life of an underwater vehicle rudder mechanism in arctic low-temperature environments.

Sphingosine 1-phosphate (S1P) is a signaling lipid molecule involved in various cellular processes. It is important to develop a quantitative method for S1P to determine endogenous levels and to investigate its functions. Especially since S1P is a tiny lipid component of most biological samples, highly sensitive analysis by LC-MS/MS is required. The main challenge in S1P analysis by chromatography is peak broadening due to the presence of a polar phosphate and zwitterion formation in S1P. In this study, we used hydrogen fluoride (HF) to efficiently remove a phosphate and then analyzed the surrogate, sphingosine, as a sharp peak by LC-ESI-MS/MS. We optimized the dephosphorylation reaction in terms of reaction time, temperature, and HF concentration. Multiple reaction monitoring (MRM) for dephosphorylated form of S1P and C17-S1P as internal standard at m/z transition 300.4&gt;282.4 (quantification ion), 300.4&gt;262.4 (qualification ion), 286.3&gt;268.2 (internal standard). This method was validated by essential parameters such as specificity, linearity, range, LOQ, LOD, accuracy, precision, and repeatability. To confirm this new method, we quantified S1P levels in various serum products (100.02 ~ 284.38 nM). To apply the method in vivo, we analyzed S1P in plasma and kidney tissues obtained from a chronic kidney disease (CKD) mouse model. S1P levels were increased only in CKD kidney tissue but not in plasma. In conclusion, by applying the dephosphorylation step with HF, we established a new sensitive LC-MS/MS quantitative method for S1P that can be applied to biological samples.

Audio classification using deep learning models, essential for applications like voice assistants and music analysis, faces challenges when deployed on edge devices due to their limited computational resources and memory. Achieving a balance between performance, efficiency, and accuracy is a significant obstacle in optimizing these models for such constrained environments. In this investigation, we evaluate diverse deep learning architectures, including Convolutional Neural Networks (CNN) and Long Short-Term Memory (LSTM), for audio classification tasks on the ESC 50, UrbanSound8k, and Audio Set datasets. Our empirical findings indicate that Mel Spectrograms outperform raw audio data, attributing this enhancement to their synergistic alignment with advanced image classification algorithms and their congruence with human auditory perception. To address the constraints of model size, we apply model compression techniques, notably magnitude pruning, Taylor Pruning, and 8-bit quantization. The research demonstrates that a hybrid pruned model achieves a commendable accuracy rate of 89 percent, which, although marginally lower than the 92 percent accuracy of the uncompressed CNN, strikingly illustrates an equilibrium between efficiency and performance. Subsequently, we deploy the optimized model on Raspberry Pi 4 and NVIDIA Jetson Nano platforms for audio classification tasks. These findings highlight the significant potential of model compression strategies in enabling effective deep learning applications on resource-limited devices, with minimal compromise on accuracy.

Energy communities are key actors in the energy transition since they optimally interconnect renewable energy capacities with the consumers. Despite versatile objectives, they usually aim at improving the self-consumption of renewable electricity within low voltage grids to maximize revenues. In addition, energy communities are an excellent opportunity to supply renewable electricity to regional and national energy systems. However, effective price signals have to be designed to coordinate the needs of the energy infrastructure with the interests of these local stakeholders. The aim of this paper is to demonstrate the integration of energy communities at the national level with a bottom-up approach. District energy systems with a building scale resolution are modelled in a mixed integer linear programming problem. The Dantzig-Wolfe decomposition is applied to reduce the computational time. The methodology lies within the framework of renewable energy hub, characterized by a high share of photovoltaic capacities. Both investments into equipment and its operation are considered. The model is applied on a set of five typical districts and weather locations representative of the Swiss building stock. The extrapolation to the national scale revealed a heterogeneous photovoltaic potential throughout the country. Present electricity tariffs promote a maximal investment into photovoltaic panels in every region, reaching an installed capacity of 67.2 GW and generating 80 TWh per year. Since the national PV capacity needed is forecast at 15.4 GW peak, coordinated investments between local and national actors are needed to prevent dispensable expenses. An uncoordinated design is expected to increase the total costs for residential energy systems by 43.2% and curtails 48.2% of local renewable electricity.

Deeper understanding of biological processes, disease mechanisms, and prospective therapeutic targets can be attained by Gene Expression Network Analysis (GENA), which offers a potent framework for revealing the intricate regulatory mechanisms controlling gene expression. GENA is a computational method used to understand the intricate interactions and relationships between the genes in a biological system. It entails using network theory, statistical analysis, and gene expression data to pinpoint functional modules, regulatory linkages, and important genes or pathways involved in a particular biological process or illness. This chapter broadly outlines the principles and practice of GENA, to an novice reader and outlines a simple method of performing a GENA using online Rice gene expression datasets available in various websites.

With the deterioration of the bridge performance and ever-increasing amount of traffic, the bridge safety is becoming a concern for engineering community. A method that can assess the bridge's condition in real-time is urgently needed. The main factors that hinder the bridge condition assessment are the uncertain operational environments. A new moving principal component analysis (MPCA) based method is developed for structural damage detection of bridges in operational environments in this paper. Two main operational environmental factors: the environmental temperature and traffic loads, are studied in the assessment process to verify the robustness and practicality of the proposed method. The numerical and experimental results show that the proposed method is effective and accurate to assess the bridge condition in operational environments.

Fatigue fractures in materials are the main cause of approximately 80% of all material failures, and it is believed that such failures can be predicted and mathematically calculated in a reliable manner. It is possible to establish prediction modalities in cases of fatigue fracture, according to three fundamental variables in fatigue, such as volume, number of fracture cycles, as well as applied stress, with the integration of Weibull constants (length characteristic). This investigation was carried out mechanical fatigue tests on specimens smaller than 4 mm2 in section of different industrial materials for their subsequent analysis through precision computed tomography in search of microfractures. The measurement of these microfractures, along with their metrics and classifications, was recorded. A convolutional neural network trained with deep learning was used to achieve the detection of microfractures in image processing. The detection of microfractures in images with 480x854 or 960x960 pixels is the primary objective of this network, and its accuracy is above 95%. Images that have microfractures and those that do not are classified by the network. Subsequently, by means of image processing, the microfracture is isolated. Finally, the images that do contain this feature are interpreted by image processing to obtain their area, perimeter, characteristic length, circularity, orientation, and type microfracture metrics. All values will be obtained in pixels and converted to metric units (μm) through a conversion factor based on image resolution.

Background: Pediatric ureteropelvic junction obstruction (UPJO) is a common urinary tract issue. Accurate assessment of postoperative kidney function is crucial for prognosis. Previous studies mainly focused on postoperative renal function and individual factors. Radionuclide imaging was costly and unsuitable for long-term follow-up. For aligning closely with clinical needs, we emphasizing renal morphology enhancement, and comprehensively analyzed factors influencing UPJO surgery outcomes. Methods: We retrospectively studied 150 pediatric UPJO patients (July 2012-July 2022) with severe anteroposterior renal pelvis dilation (APD grades 4-5) who underwent laparoscopic dismembered pyeloplasty. Demographics, symptoms, preoperative findings, and postoperative renal ultrasounds were assessed. We performed multivariable logistic regression analysis to identify significant predictors of prognosis and construct a regression model. Results: Among the 150 pediatric patients, 78 (52%) showed improvement in renal morphology after surgery. In the multivariate logistic regression analysis, age at surgery, duration of hydronephrosis, body weight, and preoperative creatinine were identified as significant prognostic factors for postoperative outcomes. The nomogram (AUC: 0.92) was constructed based on these factors and could serve as a useful tool for clinicians in evaluating the surgical prognosis of children with UPJO. Conclusions: This study reveals that among pediatric patients with severe hydronephrosis resulting from UPJO, those who are younger, have a shorter duration of illness, normal serum creatinine levels, and a healthy body weight tend to experience better postoperative recovery. This finding emphasizes the importance of adopting more proactive clinical interventions when managing such cases, with the goal of achieving enhanced recovery outcomes for affected children.

Encouraged by the administration the gentrification process has been useful in economic terms for the reactivation of socio-cultural fabrics of historic urban spaces in decline. What was initially considered an advantage has led to the touristification of historic centres, and in turn to the alter-ation of their original use. In these settings, the demographic void caused by increasingly shunning local identity has combined with pressure from excessive tourism and the obsolescence of heritage protection bodies in charge of conservation. Given the crisis affecting the definitions of the current system, this study aims to review the envi-ronmental agents of heritage value in relation to the processes of touristification and gentrification. Data obtained from different methodologies are analysed using a multidisciplinary database, a model which enables the analysis of the relevant information from the different interacting fields. The case study focuses on the historic town centre of Seville specifically between 2015 and 2020. Elements are defined as indicators for these processes and the analysis of the case study will com-prise the main results of this research.

The management of blunt abdominopelvic trauma with combined hemoperitoneum and pelvic fractures is challenging for trauma surgeons. Although angioembolization can achieve hemostasis in most visceral organ injuries and pelvic fractures after blunt abdominal trauma, it cannot effectively control hemorrhage in patients with blunt bowel mesenteric injury (BBMI). This study aimed to determine the risk factors associated with hemodynamically unstable patients with BBMI and to test the hypothesis that pelvic fracture is an independent risk factor for patients with unstable BBMI and concomitant pelvic fracture to guide the therapeutic sequence for difficult-to-manage patients. This retrospective study reviewed the data of hospitalized patients with trauma between 2009 and 2021 and included 158 adult patients with surgically proven BBMI. The patients were divided on the basis of the presence of a shock episode before emergency laparotomy. The shock group included 44.3% of all patients in the study (n = 70). Clinical injury severity and prognosis for patients in the shock group were poorer than those for patients in the non-shock group, and more invasive treatments and transfusions were performed for patients in the shock group than for those in the non-shock group. Pelvic fractures were more frequently associated in the shock group than in the non-shock group (21.4% vs. 5.7%; p = 0.003). In multivariate analysis, the presence of intracerebral hemorrhage (odds ratio [OR] = 10.87, 95% confidence intervals [CIs]: 1.70–69.75) and rib fracture (OR = 5.94, 95% CIs = 1.06–33.45) were identified as independent predictors of shock, whereas the effect of pelvic fracture did not achieve statistical significance (OR = 2.94, 95% CIs = 0.66–13.13) after adjusting for confounding factors. For patients with BBMI, outcomes need to be improved during early diagnosis and treatments should be expeditiously performed on the basis of the rapid identification of unstable hemodynamic status. In unstable patients with concomitant pelvic fractures, we support the current management algorithm that recommends performing laparotomy first.

In recent times, models like the Transformer have showcased remarkable prowess in tasks related to natural language processing. However, these models tend to be excessively intricate and demand extensive training. Additionally, while the multi-head self-attention mechanism in the Transformer model aims to capture semantic connections between words in a sequence, it encounters limitations when handling short sequences, thereby limiting its effectiveness in 5-polarity Arabic sentiment analysis tasks. The switch-transformer model has recently emerged as a high-performing alternative. Nevertheless, when these models are trained using single-task learning, they often fall short of achieving exceptional performance and struggle to generate robust latent feature representations, especially when working with compact datasets. This challenge is particularly pronounced in the case of the Arabic dialect, which is considered a low-resource language. Given these constraints, this research introduces a novel approach to sentiment analysis in Arabic text. This method leverages multitask learning in tandem with the switch-transformer shared encoder to enhance model adaptability and refine sentence representation. By introducing a mixture of expert (MoE) mechanism that break down the problem into smaller, more manageable sub-problems, the model becomes adept at handling lengthy sequences and intricate input-output relationships, benefiting both five-point and three-polarity Arabic sentiment analysis tasks. This proposed model effectively discerns sentiment in Arabic dialect sentences. The empirical results highlight the outstanding performance of the suggested model, as evidenced in evaluations on the Hotel Arabic-Reviews Dataset, the Book Reviews Arabic Dataset, and the LARB dataset.

The concept of public financial accountability, often associated with account-rendering, lacks a clear and comprehensive definition in the realm of accounting literature. Disentanglement the true essence of a phenomenon is essential, as formal definitions can only provide a superficial understanding. This study seeks to delve into the core principles of public financial accountability and their implications for financial reporting in the public sector. Applying a qualitative approach, data was gathered through in-depth interviews with 25 Nigerian scholars, professionals, and public affairs experts. The analysis reveals that the essence of public financial accountability lies in upholding citisens' trust in public officials, ensuring the responsible management of public financial resources for the greater public good, and effectively communicating financial decisions, actions, and outcomes to the public through a transparent reporting mechanism. This study sheds light on the fundamental nature of financial accountability in the public sector, enhancing our understanding of its significance in governance and financial reporting.

The recent years have been marked by rapid growth in the field of "ESG finance," leading to the emergence and expansion of ESG ratings and rating agencies. This study seeks to examine how financial investors respond to updates in ESG ratings provided by two prominent ESG rating agencies: MSCI and Refinitiv. Specifically, the goal is to determine whether any potential positive or negative alterations in a company's sustainability ratings directly affect its market value. The chosen methodology for this investigation is the Event Study, a model employed to assess the influence of economic events on corporate valuations by analyzing their Cumulated Average Abnormal Returns (CAARs). Over 840 instances of rating updates (events) were analyzed using a sample of 75 companies across various industries, all listed on major stock exchanges. The findings indicate that shifts in sustainability ratings, as evaluated by the two rating agencies, do not have a significant impact on companies' market capitalization. Moreover, these outcomes remain consistent over time, suggesting that financial markets are not assigning increasing significance to ESG ratings. Potential explanations are offered and discussed in relation to existing literature on the subject.

Asymmetry plays a major role in biology at all scales. This can be seen examining the helix of DNA, the fact that the human heart is on the left side, or that most people use their right hand. A single protein such as Myosin 1D can induce helical motion in another molecule. This causes cells, organs, and even entire bodies to twist in a domino effect, causing left-right behaviour. More in general, athlete movements are often asymmetric and, during the physical rehabilita-tion after injury the asymmetry is visually discernible. Herein we review the molecular basis of movement asymmetries and report on the available knowledge on the few therapeutics inves-tigated so far such as meloxicam. From a more rehabilitative perspective, it is very important to use effective methods to control the process of resolving the injury-related movement asym-metry through the complex use of specialized exercises, measurements and gait analysis which all can provide useful information on the effectiveness of rehabilitation plans. If for each athlete the normal range of asymmetry is known, the asymmetry can be treated individually and the evolution can be monitored over time. Appropriate measures should be taken if the movement asymmetry is outside this range. In addition, genetic, physiological, and psychological factors relevant to athlete health should be considered in the process of assessing and improving exer-cise asymmetry as we also discuss in this review. The main proposal of this work is that move-ment asymmetries in athletes should be treated individually, taking into account the athlete’s genetics, physical condition, and previous injuries.

Background: This prospective study assesses the use of Rapid Remote Online Cytological Evaluation analysis for diagnosing endoscopical achieved biopsies. It focuses on its effectiveness in identifying benign and malignant conditions using digital image processing. Methods: The study was conducted between April 2021 and September 2022 and involved a total of 314 Rapid Remote Online Cytological Evaluations (17 brush, 143 fine needle aspirations and 154 imprint cytologies) analyses performed on 239 patients at the LungenClinic Grosshansdorf. During on-site evaluation via telecytology, the time requirement was determined and the findings were compared with the cyto-/histological and final diagnoses. Results: By means of Rapid Remote Online Evaluation, 86 cytological benign and 190 malignant and 38 findings of unclear diagnosis were recorded (Ø assessment time 100 sec., range 11 - 370sec.). In 27 of the 38 cases with unclear diagnosis, the final findings were malignant tumours and only 6 were benign changes. The diagnosis of another five of these 38 cases remained unclear. Excluding these 38 findings, the Rapid Remote online cytology achieved a sensitivity of 78.6% with a specificity of 99.5% and a correct classification rate of 93.1% with regard to the final diagnosis of all cases. As expected, an increase in the sensitivity rate for the cytological detection of malignant tumours (76.1% vs. 92.5%) was found especially in fine-needle aspirations. Conclusions: Rapid remote online analysis allows fast quantitative and qualitative evaluation of clinically obtained cytological specimens. With a correct classification rate of more than 93%, sampling deficiencies can be corrected promptly and diagnostic and therapeutic approaches can be derived.

In recent years, the high-frequency abnormal price fluctuations of small-scale agricultural products have been detrimental to market stability. The traditional method based on statistical data of production factors can no longer accurately predict abnormal price fluctuations. Taking scallions as a case, the paper identifies price influencing factors from massive network information, and analyzes the causes and changing characteristics of price fluctuations from four perspectives: market supply, economic environment and market sentiment, and attention. Initially, the study employs an LDA topic model to extract factors from online sentiment data over the past four years, including market supply and demand, economic conditions, related agricultural prices, and market attention. Subsequently, using the SO-PMI algorithm to expand domain-specific lexicons and employing semantic and sentiment analysis with syntactic parsing, the study aims to improve the accuracy of sentiment quantification in text analysis. Furthermore, cointegration and Granger causality tests validate the significant impact of these factors on scallion price fluctuations, mitigating spurious regression issues. Finally, by employing a TVP-VAR model, the study compares the impulse responses and shock magnitudes of various factors in different time and spatial dimensions. It also delves into the mechanisms of heterogeneous impacts and trends in scallion prices, considering the corresponding socio-economic context and public sentiment events within specific time windows, thereby providing valuable decision-making insights for the healthy development of agricultural markets.

The hybridization of conventional thermal power plants by incorporation of renewable energy systems has witnessed widespread adoption in recent years. This trend aims not only to mitigate carbon emissions but also to enhance the overall efficiency and performance of these power generation facilities. However, calculating the performance of such intricate systems using fundamental thermodynamic equations proves to be both laborious and time-intensive. Nevertheless, possessing accurate and real-time insights into their performance is of utmost significance to ensure optimal plant operation, facilitate decision-making, and streamline power production planning. In this paper, we delve into the application of machine learning techniques, particularly hybrid methodologies, to predict the performance of power plants. Specifically, we employ three approaches: the Adaptive Neuro-Fuzzy Inference System (ANFIS), the ANFIS optimized via Particle Swarm Optimization (ANFIS-PSO), and the ANFIS optimized through Genetic Algorithm (ANFIS-GA). These techniques are alternatively applied to a complex hybrid thermal power plant, namely an Integrated Solar Combined Cycle Power Plant (ISCCPP). This ISCCPP comprises a steam turbine section, a gas turbine section, and a concentrated solar power system utilizing troughs as collectors. The energy transfer fluid, in conjunction with exhaust from the gas turbine section, heats water within a vessel or steam generator, producing steam to propel the steam turbine's rotor. Electricity generation is facilitated by both gas and steam turbines, which are coupled to a generator. The findings of this study underscore the accuracy and appropriateness of ANFIS-based models in evaluating and predicting the performance of intricate hybrid power plants. The ANFIS model exhibited an impressive overall coefficient of correlation of 0.9991. Notably, the integration of evolutionary algorithms (PSO and GA) into the ANFIS framework elevated model performance, yielding correlation coefficients of 0.9994 for ANFIS-PSO and 0.9997 for ANFIS-GA. It is noteworthy that ANFIS-GA demonstrated superior predictive capability. The modeling framework developed in this research offers valuable support to designers, energy managers, and decision-makers. It provides a robust and dependable tool to assess the performance of hybrid thermal power plants, which are poised for a global surge in numbers amid the ongoing energy transition.

Environmental pollution by noise is one of the most serious health threats nowadays. The impact of noise on the human body depends not only on the sound level but also on its spectral distribution. Reliable measurements of the environmental noise spectrum are often hampered by the very high price of top quality measuring devices. This paper explores the possibility of using much cheaper audio recorders for frequency analysis. Comparative research were performed in laboratory and field conditions, which showed that, with some limitations, these devices can be useful for the needs of environmental noise frequency analysis. This fact gives an opportunity for reduce the cost of noise analysis experimental work.

Fish feeding behavior analysis plays a critical role in aquaculture, marine fisheries, and ecological monitoring. At present, the accuracy of current fish feeding behavior analysis is easily affected by the environment, and the hypoxia state in water and high temperature have a huge impact on behavior. In addition, the poor stability, and the speed is affected by the calculation amount of the model, so it cannot be applied to aquaculture ponds. In order to solve the above problems, we propose an improved RepVGG-based method for fish feeding behavior analysis to identify nine behavioral states of fish populations, including hypoxia, hot, and normal states of none, medium, and strong feeding. Firstly, our method adds the identity and residual branches to the block of the VGG network, focusing on the acceleration operation to ensure accuracy. At the same time, the Efficient Channel Attention (ECA) module is added to reduce dimensionality to balance speed and accuracy. To evaluate the effectiveness of the method, it is validated on a constructed fish feeding behavior dataset and compared with a Convolutional Neural Network (CNN) including AlexNet, VGG16, ResNet34, MobileNet V3, and RepVGG. The experimental results show that after 15 epochs of training, the average precision of proposed method reached 97%. Compared with the basic classification algorithm, our method can increase by at least 3% while the inference speed exceeds 85 Frames Per Second (FPS). This study can be integrated into the aquaculture vision system to guide users to plan feeding strategies, and provide new ideas and methods for water quality monitoring.

Due to the non-contact measurement characteristics of trackside acoustic technology, it is now utilized for train bearing fault diagnosis. However, the relative motion between the train and the trackside acoustic detection device introduces Doppler aberration in the collected acoustic signal, which affects bearing fault diagnosis. Moreover, when a fault occurs in the train bearing, its acoustic signal exhibits cyclic smoothness characteristics that can be effectively analyzed using the cyclic smoothness method for more accurate judgment. In order to minimize diagnostic errors and enhance accuracy in bearing fault diagnosis, this study integrates bearing fault characteristics with Doppler aberration correction methods and cyclic smoothness techniques for current-stage bearings diagnostics. The overall time-domain graph becomes more compact with an approximately 50% increase in amplitude after correction compared to pre-correction values; other parameters experience enhancements ranging from 20-60%. These results validate the feasibility of our proposed approach and establish a framework for conducting bearing fault diagnosis based on cyclically smoothed Doppler aberration correction.

In this paper, we aim to address the challenge of airflow interference during fault detection in high-speed train bogies by introducing a flow field and investigating the characteristics of the sound field distribution of critical components under its influence. This approach overcomes the limitation observed in previous studies that ignored the impact of the flow field. Furthermore, we evaluate and compare various layouts for inter-track acoustic sensor arrays. The proposed sensing methods hold significant practical engineering value, and the collected data serves as a valuable reference for acquiring acoustic signals from key bogie components in future research.

The article aims to explore social aspects in the area of energy research by using bibliometrics methods and tools. The study is based on the data of Energy Research & Social Science journal publications exported from ScienceDirect database during 2019-2023. Methodologically, the work included clustering of the bibliometric records under consideration. This allowed to identify the main topics of publications and those in which the research of social problems prevails. This stage of the work was carried out using carrot2, an engine for clustering search results. Next, the analysis of publication topics related to social issues research was carried out using VOSviewer — a software tool for visualizing scientific landscapes. The topics of the four clusters obtained at this stage were described by key terms with the maximum total link strength. For the principal ones, a definition was made on the basis of the texts of publications that most fully disclose the meaning of these terms. The 1537 publications in the journal during the period under review deal with many aspects of energy transition research, renewable energy, energy policy, energy justice and energy systems, but only 78 of them are dominated by social issues. The paper reveals the main social issues in the field of energy research: sociology of energy, socio-technical system, community energy, energy democracy, sociology of the future, energy sovereignty, socio-technical imaginary and shows the insufficient attention to this topic, especially to the investment of such research.

Abstract: In this study, a computational fluid dynamics (CFD) simulation was conducted to validate the CFD model with experimental data from Zimparov et.al (2012), which investigates the heat transfer performance in a spirally corrugated tube that has a twisted tape inserted. The heat transfer was then compared to a simple corrugated tube without the twisted tape and to a smooth tube with no corrugations and no twisted tape. This simulation is compared with a previous experimental study conducted by (Zimparov et al. 2012), which focuses on tubes with a height-to-diameter ratio e/Di > 0.04 and small relative pitches of the twisted tape, H/Di. The largest improvement was noticed in the tube with e/Di= 0.057 and ridge pitch-to-height ratio p/e=6.77 with a twisted tape of H/Di= 4.7. This tube is labeled 5035. Tube 5035 was found to have the most significant enhancement, hence the focus of the CFD simulation will be on this tube, and the simulation will range for Reynolds numbers, 3.5 x 103 < Re < 5.0 x 104. The focus of this simulation is the evaluation of heat transfer and friction factors; a metric was used to obtain an empirical representation of the tube’s performance. Keywords: Spirally corrugated tube; Twisted tape; Heat transfer enhancement; Friction factor; Nusselt number; Computational fluid dynamics (CFD); Star CCM+

Taste determination in small molecules is critical in food chemistry, but traditional experimental methods can be time-consuming. Consequently, computational techniques have emerged as val-uable tools for this task. In this study, we explore taste prediction using various molecular feature representations and assess the performance of different machine learning algorithms on a dataset comprising 2,601 molecules. The results reveal that GNN-based models outperform other ap-proaches in taste prediction. Moreover, consensus models that combine diverse molecular repre-sentations demonstrate improved performance. Among these, molecular fingerprints + GNN con-sensus model emerges as the top performer, highlighting the complementary strengths of GNNs and molecular fingerprints. These findings have significant implications for food chemistry research and related fields. By leveraging these computational approaches, taste prediction can be expedited, leading to advancements in understanding the relationship between molecular structure and taste perception in various food components and related compounds.

Body composition measurement plays an important auxiliary role in the nutritional assessment of diseases, nutritional diagnosis and the evaluation of the effect of nutritional therapy. There are many techniques and methods available for the measurement of body composition. Bioelectrical impedance analysis (BIA ) of body composition has been widely used and explored in many diseases in the past 30 years. Its main advantages are its non-invasiveness, non-radiation, economy, convenience and feasibility. With the development of bioelectrical impedance technology, bioelectrical impedance analysis has gradually developed from single-frequency BIA (SF-BIA) to dual-frequency BIA (DF-BIA). now devices are available that measure at multiple fixed frequencies (multi-frequency BIA, MF-BIA) and over a range of frequencies (bioimpedance spectroscopy, BIS). The clinical significance of nutrition management in chronic kidney disease has gradually become prominent. Bioelectrical impedance analysis of body composition is favored by nephrologists and nutritionists as an auxiliary method for nutrition diagnosis, treatment and monitoring. In the past 20 years, there have been many studies on body composition measurement by bioelectrical impedance analysis in the nutritional management of CKD patients. This article will summarize the recent research results of BIA of body composition method in the nutrition management of CKD patients in pre-dialysis, hemodialysis, peritoneal dialysis and kidney transplantation, in order to provide reference for the application and research of BIA method in the nutrition management of chronic kidney disease in the future.

The inherent non-smoothness of vibroimpact system leads to complex behaviors as well as strong sensitive dependence on parameter changes. Unfortunately, uncertainties and errors in system parameters are inevitable in mechanical engineering. Therefore, the investigations of dynamical behaviors for vibroimpact systems with stochastic parameters are highly essential. The present study aims to analyze the dynamical characteristics of the three-degree-of-freedom vibroimpact system with an uncertain parameter by means of the Chebyshev polynomial approximation method. Specifically, the vibroimpact system model considered is one with unilateral constraint. Firstly, the three-degree-of-freedom vibroimpact system with an uncertain parameter is transformed into an equivalent deterministic form by the Chebyshev orthogonal approximation. Then, the ensemble means responses of the stochastic vibroimpact system are derived. Numerical simulations are performed to verify the effectiveness of the approximation method. Furthermore, the periodic and chaos motions under different system parameters are investigated, and the bifurcations of the vibroimpact system are analyzed by the Poincaré map. The results demonstrate that both the restitution coefficient and the random factor can induce the appearance of the periodic bifurcation. It is worth noting that the bifurcations fundamentally differ between the stochastic and deterministic systems. The former has a bifurcation interval, while the latter occurs at a critical point.

This paper presents a numerical study on the vertical (axial) and lateral (flexure) behavior of CFST (Concrete-Filled Steel Tube) columns with active hoop prestress; this transverse prestressing effect is achieved by bolting together two steel half-tubes. This study refers to new construction only (i.e., no retrofit). 12 prototype CFST column specimens (segments) are analyzed. These specimens differ in the prestressing force (3 levels) and in the gravity loading ratio (4 levels); they are selected to represent typical ground columns of mid-rise buildings. The structural behavior of these column specimens is simulated with a nonlinear model implemented in Abaqus; the concrete and steel behavior are described with a damage-plasticity and a plasticity model, respectively. Finally, the interface concrete-steel interaction is represented by a hard (compression-only) surface-to-surface contact model. The calculations involve three consecutive loading steps: (i) transverse prestress, (ii) axial force, and (iii) lateral loading (shear force and bending moment). The structural behavior of the CFST columns is deeply examined and discussed; the results show that their axial-flexural capacity is adequate. Noticeably, it is concluded that the overall benefits of prestressing the columns are only modest. Preliminary studies on the aforementioned mid-rise buildings equipped with the CFST columns show that their gravity and wind capacities are largely enough; conversely, their seismic capacity is sufficient for moderate seismic ground motions only.

Lactic acid bacteria (LAB) have an extracellular proteolytic system that includes a multi-domain, cell envelope protease (CEP) with a subtilisin homologous protease domain. These CEPs have different proteolytic activities despite having similar protein sequences. Structural characterization has previously been limited to CEP homologs of dairy and human derived LAB strains, excluding CEPs of plant derived LAB strains. CEP structures are a challenge to determine experimentally due to their large size and attachment to the cell envelope. This study aims to clarify the prevalence and structural diversity of CEPs by using the structure prediction software AlphaFold 2. Domain boundaries are clarified based on a comparative analysis of 21 three-dimensional structures, revealing novel domain architectures of CEP homologs that are not necessarily restricted to specific LAB species or ecological niches. The C-terminal flanking region of the protease domain is divided into fibronectin type-III-like domains with various structural traits. The analysis also emphasizes the existence of two distinct domains for cell envelope attachment that are preceded by an intrinsically disordered cell wall spanning domain. The domain variants and their combinations provide CEPs with different stability, proteolytic activity and potentially adhesive properties, making CEPs targets for steering proteolytic activity with relevance for both food development and human health.

A considerable number of infective endocarditis (IE) patients require cardiac surgery with an increased risk for postoperative sepsis. Intraoperative hemoadsorption may diminish the risk of postoperative hyperinflammation with potential economic implications for intensive care unit (ICU) occupation. The present study aimed to theoretically investigate the budget impact of a reduced length of ICU stay in IE patients treated with intraoperative hemoadsorption in the German healthcare system. Data on ICU occupation were extrapolated from a retrospective study on IE patients treated with hemoadsorption. An Excel-based budget impact model was developed to simulate the patient course over the ICU-stay. A base-case scenario without therapy reimbursement and a scenario with full therapy reimbursement were explored. The annual eligible German IE patient population was derived from official German Diagnostic Related Group (DRG) volume data. One-way deterministic sensitivity analysis and bootstrap analysis were performed to evaluate the uncertainty over the model results. Use of intraoperative hemoadsorption resulted in 2,298€ saved per patient in the base-case scenario without therapy reimbursement. Savings increased to 3,804€ per patient in case of full device-specific reimbursement. Deterministic and probabilistic sensitivity analyses confirmed the robustness of savings, with a probability of savings of 99% and 100% in the base-case and full reimbursement scenario, respectively. Intraoperative hemoadsorption in IE patients might have relevant economic benefits related to reduced ICU stay, resulting in improved resource use. Further evaluations in larger prospective cohorts are warranted.

In the following work, the assessment of the strength properties of the critical area of the rotor stage of the turbine jet engine was undertaken. This is the place of fixing the blade in the rotor disc. An important aspect of this issue are characteristic geometrical dimensions and operating factors e.g., change in rotor speed. In this paper, the assessment of the strength properties of the existing trapezoidal blade-disc connection was undertaken using parametric analysis considering FSI. Virtual models of the compressor rotor stage were developed, including parametric blade-disc connections and discrete models for FEM and CFD analyses. In the parametric analysis of the blade-disc connection, one-way fluid-structure coupling was used. The parametric analysis was aimed at assessing selected geometric parameters in terms of their impact on the maximum reduced stresses in the blade root. It was examined how the adopted value of the friction coefficient influences the maximum reduced stresses in the rotor stage of the compressor.

The current organisation is facing intensifying competition in the global business world with loads of challenges and tries to sustain itself in the market through innovation and cost-cutting. The scientific community has a growing interest in management to make a niche in the global competitive era. They have started focusing on the expediency of green human resource management (GHRM) to steer the way to excel the organizations and their employees for sustainability. Green HRM tries to build an organization that encourages employees to adopt environmentally friendly workplace behaviours and minimize costs. The aim of this study is to identify and analyse the comprehensive research advances made in the field of green human resource management through bibliometric analysis. The Scopus database has been used to conduct the research. A total of 551 documents were inferred from Scopus, considering the department time period, 2004 to 2023. The outcomes of the study shed light on the eminence of green HRM research, identifying prolific authors and co-authorship patterns, commonly used keywords, country-wise and organization-wise analysis, research themes, theoretical foundations and simple statistics. This comprehensive exploration has provided valuable insights into the concept of green HRM, its objectives, and its potential benefits for businesses and society as a whole.

Mesenchymal stem cells (MSCs) are an attractive therapeutic tool for tissue engineering and regenerative medicine owing to their regenerative and trophic properties. The best-known and most widely used are bone marrow MSCs which are currently being harvested and developed from a wide range of adult and perinatal tissues. MSCs from different sources are believed to have different secretion potentials and production which may influence their therapeutic effects. To confirm it, we performed a quantitative proteomic analysis based on the TMT technique of MSCs from three different sources: Wharton’s jelly (WJ), dental pulp (DP) and bone marrow (BM). Our analysis focused on MSC biological properties of interest for tissue engineering. We identified a total of 611 differentially expressed human proteins. WJ-MSCs showed the greatest variation compared with the other sources. WJ produced more extracellular matrix (ECM) proteins and ECM-affiliated proteins and appeared more able to modulate the inflammatory and immune response. BM-MSCs displayed enhanced differentiation and paracrine communication capabilities. DP-MSC appeared to promote exosome production. The results obtained confirm the existence of differences between WJ, DP and BM-MSC and the need to select the MSC origin according to the therapeutic objective sought.

At 100% penetration, intermittent renewable energy causes outages. To flatten the leaping supply and demand curves of renewable energy, an energy storage medium and carrier are required. The Hydrogen energy stotrage system (HydESS), which combines a proton exchange membrane (PEM)-based water electrolysis (WE) system and a fuel cell (FC), has the quickest response time, the longest duration, and the greatest storage capacity. HOMER tools for techno-economic analysis are used to evaluate the HydESS hybrid system. Kyiv, Ukraine, is appealing due to its spatial-temporal wind speed, solar irradiance, and energy security. With an LCOE of $0.245 kWh−1 and 9.3% fuel cell power output, the most feasible solution is onshore wind turbine-coupled PEMFC HydESS. As a result 1,000-kW wind power, 250-kW PEMFC, 250-kW PEMWE, and 441-kW BESS are optimized to serve a 3,900 kWh day academic residence load. When compared to a diesel generator and a BESS, the hybrid HydESS reduces CO2 emissions by 4,132 tons over a 25-year period. The LCOE of a hybrid HydESS system is determined by the SOFC lifetime rather than the PEMFC's 2% difference between 40,000 and 50,000 h with the same rated power. This study recommends accelerating PEMFC development with fluctuation-endurable materials and design.

Apple snails of the genus Pomacea (Mollusca: Caenogastropoda: Ampullariidae) are native to the Neotropics and exhibit high species diversity. They hold cultural and ecological significance, serving as an important protein source in Peru. However, this genus has also received broad interest worldwide due to its invasive capacity, especially in Southeast Asia, where some species such as Pomacea canaliculata (Lamarck, 1822) and P. maculata Perry, 1810 are considered significant pests. Consequently, most genetic studies have focused almost exclusively on these invasive species. In contrast, few efforts have been made to understand the evolutionary relationships of the South American native species, especially at the genomic level. In this study, we assembled and annotated the mitochondrial genome of two Pomacea species native to the Peruvian Amazon: Pomacea reevei Ampuero &amp; Ramírez, 2023 and P. aulanieri (Deville &amp; Huppé, 1850). Through a comprehensive comparison with available mitogenomes on NCBI, we found that the length and organization of these mitogenomes fall within the range of what is currently known in Pomacea. Comparisons between these mitogenomes with those previously published revealed differences in the overlapping of adjacent genes, the size of certain protein-coding genes (PCGs) and the secondary structure of some tRNAs which are consistent with the phylogenetic relationships between these species. These findings provide valuable insights into the systematics and genomics of the genus Pomacea.

Electricity demand forecasting plays a significant role in energy markets. Accurate prediction of electricity demand is the key factor to optimize power generation, consumption, saving energy resources, and determining the energy prices. However, integrating energy mix scenarios, including solar and wind power which are highly non-linear and seasonal, into an existing grid increases uncertainty in generation, adds the challenges for precise forecast. To tackle these challenges, state-of-the-art methods and algorithms have been implemented in literature. We have developed Artificial Intelligence (AI) based deep learning models that can effectively handle the information of long time-series data. Based on the pattern of dataset, four different scenarios were developed and two best scenarios were selected for prediction. Dozens of models were developed and tested in deep AI networks. In the first scenario (Scenario1), data for weekdays excluding holidays was taken and in the second scenario (Scenario2) all the data in the basket was taken. Remaining two scenarios, weekends and holidays were tested and neglected because of their high prediction error. To find the optimal configuration, models were trained and tested within a large space of alternatives called hyper-parameters. In this study, an Aritificial Neural Network (ANN) based Feed-forward Neural Network (FNN) showed the minimum prediction error for Scenario1 while a Recurrent Neural Network (RNN) based Gated Recurrent Network (GRU) showed the minimum prediction error for Scenario2. While comparing the accuracy, the lowest MAPE of 2.47% was obtained from FNN for Scenario1. When evaluating the same testing dataset (non-holidays) of Scenario2, the RNN-GRU model achieved the lowest MAPE of 2.71%. Therefore, we can conclude that grouping of weekdays as Senario1 prepared by excluding the holidays provides better forecasting accuracy compared to the single group approach used in Scenario2, where all the dataset is considered together. However, Scenario2 is equally important to predict the demand for weekends and holidays.

As required by the EU legislation and the national risk management duties, the pesticide residues were determined by four specialized laboratories in 9,924 samples taken from 119 crops of economic importance and imported foodstuffs during 2017-2021 in Hungary. The screening method applied covered 622 pesticide residues as defined for enforcement purposes. The limit of detection ranged between 0.002-0.008 mg/kg. The 1.0% violation rate was lower than in the European Union for all commodities. No residue was detectable in 45.9% of the samples. For detailed analyses of the results, eight commodities (apple, cherry, grape, nectarine/peach, sweet peppers, and strawberry) were selected as they were analyzed over 195 samples and contained most frequently residues. Besides testing their conformity with national MRLs, applying 0.3MRL action limits for pre-export control, we found that 73% of the sampled lots would be compliant with ≥90% probability based on second independent sampling. Multiple residues (2-23) in one sample were detected in 36-50% of the tested lots. Noting the provisions of integrated pest management and the major pests and diseases of selected crops, normally 3-4, exceptionally 7-9 active ingredients of different mode of actions should be sufficient for their effective and economic protection.

This paper presents the results of simulations of particle-laden air-solid jet flow in long straight tubes using CFD-DEM, along with an analysis of coarse-graining. Although previous studies have used CFD-DEM for similar flows, these have typically been in a dilute flow regime where uncoupled simulations are accurate. However, fully coupled simulations can introduce issues, necessitating validation studies to ensure that all coupling parameters are effectively used and that the physics is accurately represented. This paper validates the simulations against two different experimental studies, with fluid Reynolds numbers between 10,000 and 40,000 and Stokes numbers between 5.6 and 50. Interestingly, the profiles of mean particle velocity exhibit fewer discrepancies as the Stokes number increases but more discrepancies for the root mean square velocity compared to the experiments. Particle number flux is consistent with the experiments after the nozzle exit. Coarse-graining is also applied to the same simulations, achieving relatively accurate results. However, as expected, scaling of contact collision frequencies, forces, and stresses cannot be achieved, meaning that coarse-graining may be useful for comparing designs or operating parameters on an industrial scale but falls short when measuring the total energy dissipation of one experiment.